REPAIRS/MAINTENANCE OF COMPOUND WALL, PERIMETER WALL, CATTLE FENCING, CHAIN LINK FENCING, BARBED WIRE, CONCERTINA COIL, ROOF COVERING AND ROOF TREATMENT TO OTM AND MD ACCN INCL OTHER B/R WORKS AT CHAF BANGALORE

Amount

Demolition Brick work or stone/ boulder/block masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles etc complete all as specified and directed.

demilition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar etc complete all as specified and directed.

Demolition of cement concrete (un reinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) etc complete all as specified and directed.

Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for etc complete all as specified and directed.

Demolition of reinforced cement concrete in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work including RCC water storage tanks all as specified and as directed.

Dismantling structural steel work of any description and any position including doors, gate but excluding framed trusses etc complete all as specified and directed.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings etc complete all as specified and directed.

Dismantling of Asbestos cement (corrugated,semi corrugated, etc.) sheets in roof coverings etc complete all as specified and directed.

Dismantling chain link fencing wire mesh, any type description and size etc complete all as specified and directed.

Excavation in post holes each n. exc 0.50Cum in any type of soil , getting out, returning filling in and ramming earth or broken rubble mixed with earth around , in layers not exceeding 25 cm ,watering and removing surplus soil to a distance n.exc 50m and making good surface etc complete all as specified and directed.

M&L for hardcore of gauge n.exc 63mm broken stone or boulders, deposited, spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface etc complete all as specified and directed.

M&L for cement concrete in foundation PCC 1:4:8 type D2 using 40mm graded stone agg as in foundation filling or mass concrete for fencing post etc complete all as specified and directed.

M&L for providing cement concrete type B-1 (1:2:4) using 20mm graded aggregate as in roof kerbs or mud stops, rounded or chamfered on edges all as specified.

M &L for providing cement concrete type B1,1:2:4 (20 mm graded aggregate) as in copings, Padding for roof & Chajja including formwork for coping etc complete all as specified and directed.

M&L for Pre-cast cement concrete block masonry with solid blocks, exc 10cm in width and setting in mortar type C1 (1:3:6) set in cement mortar (1:6) etc complete all as specified and directed.

All as per item No. 15 above but except block or slabs etc complete all as specified and directed.

M&L for precast cement concrete 1:2:4, type B-1 using 20 mm graded stone aggregate as in cover slabs and the like, set in cement mortar 1:6 with plain fair faces complete with joints to match etc complete all as specified and directed.

Providing reinforced cement concrete type B-1, 1:2:4 (20 mm graded aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the likeincluding necessary form work etc complete all as specified and directed.

Providing reinforced cement concrete type B-1, 1:2:4 (20 mm graded aggregate) chajjas including necessary form work etc complete all as specified and directed.

Supply only integral water proofing compound complete all as directed.

Cutting holes in brickwalls built in cement mortar Exc. Half brick but not exc one brick for inserting holdfasts ,clamp etc and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as directed.

M&L for stone walling of square rubbled masanory, regular coursed (Bangalore type) well bounded and solidity hearted built in CM 1:6 etc complete all as specified and directed.

All as per item No. 22 above but except stones etc complete all as specified and directed.

M & L Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite etc complete all as specified and directed.

M & L for Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite etc complete all as specified and directed.

S&F posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, welding etc. and similar work conforming to Fe-290 Gde E-165 etc complete all as specified and directed.

S & F framed work such as grills, grating, etc.. With ends of bars shouldered and or rivted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con-formig to Fe.290. Gde-E-165 etc complete all as specified and directed.

S&F Hight strength, deformed steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking and binding with mild steel wire (annealed) not less than 0.90mm dia etc complete all as specified and directed.

S&F Hight strength, deformed steel TMT 6mm to 8mm mm dia, cut to length, bent to shape required including cranking and binding with mild steel wire (annealed) not less than 0.90mm dia etc complete all as specified and directed.

S& F Joist channel,angle or Tee sections ( Fe -410-W (Gde-E-250) quality A) fixed independently without conecting plates etc complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire etc complete all as specified and directed.

S&F in repairs galvanised 2 strand barbed wire 2.24mm dia of wire and 2mm dia of barbed at 75mm spacing and straining and fixing to any type of strandre nails straining bolts, including securing or tying at crossing with and provn of galvanised MS wire staples or steel pins etc complete all as specified and directed.

Restringing and resecuring of existing barbed wire incl. making good staples added fixed etc complete all as specified and directed.

S&F in repair concertina coils 610mm diameter wire of short profile with HTGS spring corewire of diameter 2.59mm pitch between the barb 24.5mm. Tape will be hot dip galvanised upto 20 microns. Weight of each coil should be 7.5 to 8kg tape to be 0.5mm thick. Tensile strength will be 16000N/mmsqr (minimum) number of spiral turns per coil is before crimping is 18mm minimum including dovetail clips @ 5 clips per 2 spiral turns approx 125 clips per coil complete all as specified and as directed.

Supply only Chain link MS galvanisd fencing, any size or type etc complete all as specified and directed.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and directed.

M&L Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and as directed.

Taking down old damaged existing water proofing membrane of any thickness from roof top complete all as specified and directed.

M&L for water proofing treatment on horizontal and vertical surfaces with Providing and laying / fixing TPO (Thermoplastic Polyolefin)membrane incl Cleaning the surface and laying of 200GSM Geo textil and cover up with TPO RF 1.2 mm thermoplastic membrane on roof & up to 300 mm of parapets and crumple joint including junction of roof and parapet, welding the seam joints with hot airgun/machine and terminate the corners with extra protection to bear the high wind pressure. The TPO should be thoughroly tightened with the lower structure using mechanical fastening properly to avoid the corners and seam joint failure complete all as specified and directed. Note:- (i) The work shall be carried out as per manufacturer's specifications and application methodology. (ii) Execution shall be done with authorised trained/ skilled applicator of manufacturer as per the technical guide lines laid by the manufacturer. (iii) Company back guarantee shall be given by contractor after completion of water proofing work before payment. Make :Asian paints TPO or equivalent product of M/s Bauchemic /CIPY/ SIKA / Pidilite/Dr fixit TO membrane/Fosroc..

M&L for cement concrete type C-2, 1:3:6 (40mm graded aggregate) 75mm thick as in plinth protection, pavement etc and finished the surface even and fair etc complete all as specified and directed.

M & L 100 mm thick Cement concrete type B-2, 1:2:4 (40mm graded aggregate) in floor finishesh and paving and finishing cement concrete surface even and smooth Without using extra cement etc complete all as specified and directed.

M&L for 100 mm thick Plain Cement concrete type D2 1:4:8 (40mm graded aggregate) as in sub bases, floors, pavings etc complete all as specified and directed.

Providing and laying 60 mm thick factory made chamfered edge cement concrete interlocking paver block (rubber finish on top) of M-30 grade made by block making machine (PV mould) and of approved size and design /shape laid in required colour and pattern over 50 mm thick compacted bed of fine sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in paved areas, inculding taking dismantling old interlocking blocks complete all as specified and as directed by Engg-in-Charge.

S & F non Skid (rough) endura High thickness tiles of 10/12 mm thick of approved size and shape and colour with minimum flexural strength of 38 N/mm2 including dismnantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) and rubbish off the premisies complete all as specified and directed. Make: Johnson Endura/Somany Dura stone , Wavy Ivory & Wavy Terracotta

S & F chequered tiles of 300X300X25 mm thick as in floor, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of the tiles with 15mm screed bed 1:6 for laying floor finishes inculding dismnantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) and rubbish off the premisies etc complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc etc complete all as specified and directed.

M & L rendering 10 mm thick cement plaster (1:3) on roof padding finished even and fair with approved water proofing compound @ 3% by weight of cement or as per manufacture's instruction including taking down existing cement plaster/lime plaster all as specified and as directed. (Note : WPC will be measured and paid seperately as supply only under relevant item).

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement morter 1:4 finished even and smooth without using extra cement complete all as specified and as directed.

M&L rendering 10mm thick cement plaster on fair faces of concrete surfaces in ceiling/chajjas in cement motor 1:4 finished even and smooth without using extra cement complete including necessary scaffolding all as specified and as directed directed.

Racking out joints/pointing to to block in course masonry, or concrete block walling in cement mortar etc complete all as specified and directed.

M&L for keyed pointing to random or polygonal rubble, uncoursed or brought upto course in cement mortar (1:3) etc complete all as specified and directed.

M&L for preparation of new undecorated surface of walls and applying two coats of cement base paint through mechanical means all as specified and as directed.

M&L for preparation of untreated new steel surfaces of any description n.exc 10cm width or girth and applying two coats of synthetic enamel paint ( 1st grade quality ) over a coat of red oxide primer complete all as specified and as directed.

M&L for preparation of untreated new steel surfaces of any description n.exc 10cm width or girth and applying two coats of synthetic enamel paint ( 1st grade quality ) over a coat of red oxide primer complete all as specified and as directed.

M&L preparation of plastered or un plastered old decorated surfaces of walls by brooming down or with steel wire brushing, scraping down smoke soot’s, moulds , moss & efflorescent salts & treating oily & greasy spots & filling holes & cracks with suitable material like white cement or Plaster of Paris and applying one coat of cement base paint, through mechanical means including necessary scaffolding upto 6th storey complete all as specified and as directed.

M&L preparation of plastered or un plastered old decorated surfaces of walls by brooming down or with steel wire brushing, scraping down smoke soot’s, moulds , moss & efflorescent salts & treating oily & greasy spots & filling holes & cracks with suitable material like white cement or Plaster of Paris and applying one coat of white wash including necessary scaffolding upto 6th storey complete all as specified and as directed.

M&L preparation of old painted surfaces of steel surface of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint including necessary scaffolding up to 6th storey complete all as specified and as directed.

M&L for preparation of untreated new steel surfaces of any description n.exc 10cm width or girth and applying two coats of synthetic enamel paint ( 1st grade quality ) over a coat of red oxide primer complete all as specified and as directed.

M&L for preparation of untreated new steel surfaces of any description n.exc 10cm width or girth and applying two coats of synthetic enamel paint ( 1st grade quality ) over a coat of red oxide primer complete all as specified and as directed.

M&L preparation of plastered or un plastered old decorated surfaces of walls by brooming down or with steel wire brushing, scraping down smoke soot’s, moulds , moss & efflorescent salts & treating oily & greasy spots & filling holes & cracks with suitable material like white cement or Plaster of Paris and applying applying one coat of exterior weather proof paint through mechanical means including necessary scaffolding upto 6th storey complete all as specified and as directed.

Preparation of new plastered surfaces of wall and apply two coat of Weather proof exterior emulsion over a coat of primer all as specified and as directed.

Supply and fixing tube medium grade galvanized with all fittings 15mm bore and connections, complete all as specified and as directed.

Supply and fixing tube medium grade galvanized with all fittings 20mm bore and connections, complete all as specified and as directed.

Supply and fixing tube medium grade galvanized with all fittings 25mm bore and connections, complete all as specified and as directed.

Taking up or down steel tubing and connections, fittings etc including cleaning for refixing or removal to store for 15mm bore complete all as specified and as directed. Note :- Quoted rate shall deemed to include cost of scaffolding or ladders etc required for approaching for repair work.

Taking up or down steel tubing and connections, fittings etc including cleaning for refixing or removal to store for 20mm bore complete all as specified and as directed. Note :- Quoted rate shall deemed to include cost of scaffolding or ladders etc required for approaching for repair work.

Taking up or down steel tubing and connections, fittings etc including cleaning for refixing or removal to store for 25mm bore complete all as specified and as directed. Note :- Quoted rate shall deemed to include cost of scaffolding or ladders etc required for approaching for repair work.

Taking up or down steel tubing and connections, fittings etc including cleaning for refixing and Refixing old steel tubing and connections,fittings etc in new or old position (Walls, ceiling, floors, etc.) 15 mm bore complete all as specified and as directed.

Taking up or down steel tubing and connections, fittings etc including cleaning for refixing and Refixing old steel tubing and connections, fittings etc in new or old position (Walls, ceiling, floors, etc.) 20 mm bore complete all as specified and as directed.

Taking up or down steel tubing and connections, fittihgs etc including cleaning for refixing and Refixing old steel tubing and connections, fittings etc in new or old position (Walls, ceiling, floors, etc.) 25 mm bore complete all as specified and as directed.

Disconnecting existing tanks, setting aside or lowering if required for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in old or new location position capacity exc 250&n exc 500 ltr complete all as specified

Disconnecting existing tanks, setting aside or lowering if required for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in old or new location position capacity exc 500 & n exc 1000 ltr complete all as specified

S&F trible layered Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I , 500 Ltrs Capacity including dismantling existing 500 Ltr water tanks complete all as specified and as directed.

S&F trible layered Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I , 1000 Ltrs Capacity including dismantling existing 1000 Ltr water tanks complete all as specified and as directed.

S&F in repairs 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed.

S&F in repairs 25mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed.

S&F in repairs ball brass valves, 20mm dia bore high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule all as specified and directed.

Removing building materials etc. to a distance of 30.00 Km or above, beyond the lead included in the rates, including loading, unloading and stacking at the destination etc complete all as specified and directed. Note:- All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost in accordance with all applicable regulations.

B5BUILDING SOLUTIONS

VAJRA CONSTRUCTIONS

Kavitha Constructions

PRACHANIVA CONSTRUCTIONS