Providing CAD facility to LIS Kaunta in Tehsil Kasauli Distt. Solan (HP)

Amount

Excavation in foundation trenches etc. in all kinds of soil such as pick work.jumper work blasting work in soft or hard rook or b cum chiselling soft/ hard rock where blasting is prohibited in al leads and lif-ts including trimming and dewatering where ever required dressing of sides and bed stacking the excavated soi clear from the edge of excavaton and then returning the excavated soil after completion of work in 15cm layers wher required into plinths, side of foundation etc. Consolidating each deposited layers by remming and watering and then disposing of all surplus excavated earth as direction within a lead of 20 mtrs. pick jumper work 50% each as per direction and to the entire satisfaction of Engineer-in-Charge upto all lead and lifts.

Laying in trenches HDPE pipes of following diameters and classes as per IS 4984 PN.4 PE-80 and jointing the pipes through push type compression joints by hydrautically operated machines upto 110 mm diameter and butt fussion (heat fusion process) above 110mm diameter i/c necessary fitting, bends, tees & reducers fabricated in accprdance with IS 8360 &IS 8008 with latest ammendments & shall be made as & where required conferming to code IS 8008 &IS 7634, stub ends will be welded on pipes & jointing shall be complete in all respect i/c testing at site upto entire satisfaction of Engineer-in-Charge.

110 mm dia PN 4.00

180mm dia PN 4.00

Providing and fixing of 100mm dia sluice valve class PN 1.0 of leader/kirloskar make completion in all respect as per direction of Engineer-in Charge

Excavation in earth work & filling in 15 cm. layers in foundation & plinths including ramming watering Consolidating upto all leads and lifts in all kinds of soil disposed earth to be leveled and neatly dressed as per direction and to the entire satisfaction of the Engineer-in-charge.

Providing and laying cement concrete 1:48 (1 cement: 4 sand: B graded stone aggregate 40 mm nominal size and curing complete excluding cost of form work in Foundation and Plinth as per direction and to the entire satisfaction of the Engineer-in-charge.

Providing and laying cement concrete by concrete mix using nominal concrete mix 'M-20" with graded stone aggregate 20mm nominal size finishing and curing complete (excluding the cost of form work) for RCC work.as per direction and to the entire satisfaction of the Engineer-in-charge in all leads and lifta including carriage,

Prov.form work with steel plates 3.15 mm thick welded with angle iron in frame 30x30x5mm,so as to give a fair finish including centring, shuttering, strutting & propping etc, with wooden battens & ballies, height of propping && centring below supporting floor to ceiling should be upto all heights & removal of the same for in situ reinforced concrete & plain concrete work in all leads & lifts including carriage and as per direction and to the entire satisfaction of the Engineer-in-charge.

Vertical surfaces such as wall (any thickness.) partitions & the like including attached pillasters, buttresses, plinth & string courses & the like.

Boulders filling at bottom of 350 Ф Hydrant Chamber

Fittings and accessories

90Ф PN4 HDPE pipes

90Ф PN6 HDPE pipe end

90Ф PN6 HDPE 90° bends

90Ф PN6 HDPE OC pump connector

Providing mild/tor steel reinforcement for R.C.C work including bending, binding and placing in position complete upto floor two level in all leads & lifts including carriage and as per direction and to the entire satisfaction of the Engineer in-charge.

Providing & fixing in position RCC pipe of following dia., class & length for outlets

RCC pipe of 900mm NP2.0

RCC pipe of 350mm NP2.0

Providing and Fixing 80 mm dia control/sluice valve Kirloskar/Leader make as per direction and to the entire satisfaction of the Engineer-in-charge

Steel work welded in built up sections, trusses & framed work including cutting, hoisting & fixing in position & applying a priming coatof red paint In grating, framed,guards, bars, ladders, railing,brackets & similar works.work in all leads & lifts including carriage and as per direction and to the entire satisfaction of the Engineer-in-charge

Miscellanious for locking arrangements & other accessories as per direction and to the entire satisfaction of the Engineer-in-charge.

J.J. ENTERPRISES (BID ID -581547)

ANITA KUMARI CONTRACTOR (BID ID -581605)