RENOVATION OF S.T. RESIDENTIAL MIDDLE SCHOOL KAIRABANI ,BLOCK-DUMKA ,DIST-DUMKA

Extra for cleaning the old surface by scraping the entire old white wash or colour wash including cost of scaffolding all complete as per direction of E/I

Taking down old door and window shutters including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Dismantling R.C.C. work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Taking down chaukhats in doors including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

Centering and shuttering including strutting, propping etc. and removal of form for chajja all complete as per direction of E/I.

Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 6mm cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Dismantling patent stone floor including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc.,., complete.

Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointing with white cement including rubbing, polishing and cost of curring taxes and royalty all complete as per building specification and direction and E/I. With commericial grade colour 15x15cm Tiles

Providing 25mm thick first class patent stone flooring (1:2:4) with stone chips in two layers, bottom layers 19mm. Thick (1:2:4)with 12mm to 6mm. Size graded stone chips and top layer 6mm. Thicks (1:2) with 6mm down stone chips, in panels including cost of curing, finishing the surface smooth by rubbing with carborandum stone, taxes and royality with all complete as per building specification and direction of E/I.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)

Providing 12mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete.

Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by the rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/I.

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade -New work (Two or more coats applied @ 1.43 ltr/ 10 sqm. over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm).

Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.

providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (only valid for SAIL & TATA STEEL)(8MM)

Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer-in-Charge.

Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail.

Providing and laying Doublecharge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 / ISO 13006 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm .

Providing and fixing aluminium work for doors,window ventilation and partitions with extruded built up standard tubular section for approprite Z section and other section of approved make conforming to IS 733 & IS 1285,fixing with dash fastners of required dia and size .........

Providing and fixing glazed in aluminium work for doors,window ventilation and partitions etc with EPDM rubber/neoprene gasket etc with glass panes of 4.00 mm thickness(wt not less than 10 kg/sqm)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge:

Supplying, fitting and fixing 35mm thick solid core type non-decorative single leaf flush door shutter in door and windows with black board core blended with high quality phenol formal dehydes synthetic resine both side commercial veneered of standard make with oxidised iron fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I.

Providing two coats of synthetic enamel paint of approved shade and make over new wooden surface including cleaning the surface after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.

Supplying Un-skilled labour for cleaning the site all complete jobs as per specification and direction of E/I(Cleaning the site and roof surface)

(a) Sand lead 6 km(1k+5p)

(b) Stone chips lead 52 km

Supplying, fitting and fixing viterous white glazed earthen ware wash hand basin of Parry or Hindustan or any other I.S.S. approved make supported on pointed c.l. or R.S. brackets 32 m C.I. brass waste 15 mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350grms., 32 mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/l.

Supplying, fitting and fixing vitreous white glazed earthen ware I.W.C. Of parry Hindustan or any other I.S.S. Approved make with 100mm H.C.I. 'P' trap 15liters C.I. Pull and let go flushing cistern of names or other I.S.S. Equipment make, complete with all fittings, C.I. or C.C. brackets 32mm alkathene/P.V.C. telescopic flush, pipe about 2 M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pert of vitreous white glazed earthenwere were footrest to be fixed in floor 15mm C.I. body brass spindle stope cock of weight not less than 50grms, 15mm P.V.C. connection pipe 450mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I. (A) 580 mm long (c) with 12.5 lit. Low level PVC Cistern

Supplying, fitting and fixing flat back or angular, lipped front viterous white glazed earthen ware urinal of Hindustan 'Parry' or any other approved I.S.S. make with 5 litres capacity C.i. automatic flusing cistern of reliance for any other I.S.S. approved make with all fittings with C.I. or R.S. brackets, standard size G.I. flush pipe with fitting clamps, 15mm C.I. body brass spindle stop cock of approved quality weight not less than 400 grams, 15mm PVC/Alkthene pipe 450mm longwith brass coupling at both ends and doing plumber joints including priming coat of red oxide, cutting wall and floor making good the same etc. all complete as per specification and direction of E/I.(FLAT BACK OR STANDING CORNER 600X350MM)

Providing and fixing male ended 15 mm dia brass bib cock of approved qulity (wt not less than 350 gms)with extra socket .

Providing and fixing brass/CI stop cock of approved quality (15 mm dia )

Providing and fixing G.M non return valve horizontal/vertical type of approved quality as per specification (Horizontal 25 mm dia ,wt not less than 375 gms)

Providing and fixing G.M non return valve horizontal/vertical type of approved quality as per specification (Vertical 25 mm dia ,wt not less than 375 gms)

Providing and fixing 15mm size CP brass pillar cock (wt not less than 350 gms CI body brass spindle pillar cock of approved quality (C.I brass spindle)

Providing and fixing Gun metal full way valve of approved qualtiy, all complete as per specification and direction of E/l.(25 mm dia and weight not less than 500 gms)

Supplying, fitting and fixing the following items complete with all materials as per specification and direction of E/l. 600x125mm glass shelf complete

Mirror of 6 mm thick plate glass beveled edge mirror includind cp brass revolving fitting 3mm plywood board'

CP brass dish container

CP brass towel rail 20mmx600mm with bracket container

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.- External work 15 mm nominal dia

20 mm nominal dia

25 mm nominal dia

Making hole in wall for G.I. pipe and restoring the same all cost complete(250 mm dia)

Supplying labours tools and tackles for cleaning filled and chocked iman hole,septic tank,inspection chamber ,gully pits sewerage tank etc.all lift and disposal of spoils up to lead 50m.

Polythene water storage tank of mark with cover and-suitable locking system in double layer confirming to lS: 12701-1996 with Latest revision.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.(75 mm )

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Coupler 75 mm dia

Coupler 110 mm dia

Single pushfit coupler 75 mm dia

Single pushfit coupler 110 mm dia

Single tee with door 75x75x75 mm

Single tee with door 110x110x110 mm

Single tee without door 75x75x75 mm

Single tee without door 110 mm

Bend 87.5 degree 110 mm dia

Shoe plain 110 mm dia

WGPVT-wiring for light /point/fan point/exhaust fan/call bell point 1.5 sqmm FRPVC insulated copper conductor….do…all jobs as per direction of E/I (Group-B)

Power plug wiring in PVC conduit(2x4 sq. mm):- Wiring for light/power plug with 2x4 sq.mm FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, along with 1 No. 4 sq. mm FR PVC insulated copper conductor single core for loop earthing etc. as required.

Circuit/submain wiring in PVC conduit:- Wiring for circuit/submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit etc. as required.(2X1.5sqmm+1x1.5sqmm.earth wire)

Circuit/submain wiring in PVC conduit:- Wiring for circuit/submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit etc. as required.(2X2.5sqmm+1x2.5sqmm.earth wire)

Circuit/submain wiring in PVC conduit:- Wiring for circuit/submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit etc. as required.(2X4.0sqmm+1x4.0sqmm.earth wire)

S/F modular type switch socket supplying and fixing of the following modular switch socket box etc. 5/6 amps one way switch

S/F modular type switch socket supplying and fixing of the following modular switch socket box etc. 15/16 amps one way switch

S/F modular type switch socket supplying and fixing of the following modular switch socket box etc. 5/6 amps 3 pin socket outlet

S/F modular type switch socket supplying and fixing of the following modular switch socket box etc. 15/16 amps 6 pin socket outlet

S/F power plug point with modular type accessories :-supplying and fixing suitable size G.I box with modular plate cover in front on with modular surface or in recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps modular switch etc

S/F Batten holder:- Supplying and fixing Batten/Angle holder including connection etc as required.

Supplying and fixing 3 pin 5 amps.ceiling rose on the existing junction box/wooden block including connection etc.

S/F 'B' series, S.P. MCB :- Supplying and fixing 6 amps to 32 amps rating, 240 volts, 10 KA, "B" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing the commissioning etc. as required.(6/32 single pole B series)

Supplying and fixing of 15/16 Watt LED Bulb as required.

S/F rewirable double pole/TP & N switch dissconector providing and fixing following DP/TP & N sheet metal switch dissconnector fuse unit in the existing metal board with rewirable type fuse including drilling holes in metal board making conncetion etc(32 amp double pole)

1200mm (48") Ceiling Fan (Polar/USHA/Havells/Poly cab/V-guard/ Bajaj Brand)

S/F modular type electronics fan regulator :-supplying and fixing steep type electronics fan regulator on the exixting modular plate & switch box including connection etc

S/F modular boxes ,base & cover plate :-supplying and fixing following size modular GI box along with modular switch in recess etc(1.17.1 ,1 or 2 module 78x78x45mm)

S/F modular boxes ,base & cover plate :-supplying and fixing following size modular GI box along with modular switch in recess etc(1.17.1 ,12 module 135x205x60mm)

Supplying of Metal Exhaust Fan 12"(300mm) of Polar/USHA/Havells/Poly cab/V-guard/ Bajaj Brand approved make as required.

ITC exhaust fan upto 450 mm sweep:- Installation of exhaust fan upto 450mm sweep in the existing opening including making the hole to suit the size of the above fan making good the damage, connection, testing, commissioning etc. as required.

HYDT: Cost of Drilling 200 mmx165mmx125 mtr.deep bore well in all kind of Soil and rock in rural area for instalation of pump set with Hydrolic DTH Rig machine all complete including all materials, tools,driling rig,air compressureand equipmentsas well as fule, lubricantsand cost of transportation of rig machine annd other vehical up to Site. FROM 0.00M TO 50.00 M BELOW G.L

FROM 51.00M TO 125.00 M BELOW G.L

FROM 100M TO 210.00 M BELOW G.L

Supplying and fixing assembling lowering vertical postion in bore well,unplactisized PVC medium casing(CM) pipe of required dia conforming to IS 12818,including labour charge ,fitting & accessories etc (200 mm dia nominal size)

Supply all tools equipments & labour and doing washing flushing and development of drilled tube well to give clean and clear water all complete as per direction E/I (basic rates)

Basic rates of standard I.SI mark deep hand pump for india mark-2,I.S.I 15500(part-2)/2004 with least revision including 12mmx3 mtr long 8 no connecting rods made with coupler (100 mm to 125 mm casing)

GI pipes (TATA mar or eqivalent ) as per IS -1239 (part-01)/2004 ISI marked/medium Quality. (iv) 40mm Dia

Supplying 100 mm dia submersible pump set confirmining to IS 8034 and motor confirming to IS 9283 Pump shall be suitable for various …..do…do...all jobs as per direction of E/I

S/F/F Starter pannel board including voltmeter ameter on/off switch and provision for dry run protection as per IS specification for 2 HP SUBMERSIBLE motor pump encased in painted mild steel sheet box with glass front looking arrangement .etc

Providing and fixing cholorinated polyvinyle chloride CPVC pipes having thermal stability for hot and cool water supply including all cpvc plain brass threaded fittings this including jointing of pipes & fitting etc(40 mm nominal dia outer pipes)

3 Core PVC insulated PVC sheated copper conductor flat submersible cable .supplying flate flexible subermissible cable with cooper conductor etc(3 core 4 sq mm copper wire)

Providing and fixing suitable sized threaded mild steel cap or spot welded plate to the top of the bore well housing casing pipes removal as per requirement (200 mm dia)

Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 200 mm clamp

Add 18% for G.S.T.

Labour Cess

Please Enable Macros to View BoQ information