REPAIRS TO JOINERY, ROOF, SANITARY FITTING, PLUMBING AND MISC WORKS AT CENTRAL INSTITUTE, STN UNITS UNDER GE (N) AHMEDNAGAR.

Amount

Supply and fixing in repairs vitreous china wash down water closet (wall hung)Toilet with cistern complete) white including fixing bolts with and including plastic water closet seat cover closed pattern with flat bottom and cover and MSCP almn hinges device complete connecting to 'P' or 'S' trap etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs vitreous china wash down water closet (FLOOR MOUNTED) Toilet with cistern complete white including fixing bolts with and including plastic water closet seat cover closed pattern with flat bottom and cover and MSCP almn hinges device complete connecting to 'P' or 'S' trap etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs vitreous china urinal with censor white including fixing bolts with and including plastic water closet seat cover closed pattern with flat bottom and cover and MSCP almn hinges device complete connecting to 'P' or 'S' trap etc complete all as specified and directed by Engineer-in-Charge.

Replacement batteries of Censor urinal/wash hand basin of any type of description

S&F for 19/20mm PVC shutter Colour PVC prelaminated board fixed to timber frame worka as in cup boards shutters/shelves/pelmets box and similar items etc complte all as specified and directed by Engineer-in-Charge

S&F for in repaire Auto closing hinges 35mm of o crank (KH-001) ir 8 crank (KH=002) openable at 110 degree for kitchen cabinet shutters fixed complete as specified and directed

S & F in 12 mm thick toughned glass for doors, sheets in corner etc including floor spring, door lock with othe connecting items etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repairs Consealed Stop cock cast copper alloy, fancy type screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fix of size 15 mm bore

Supply and fixing in repairs angle Cock with wall flange cast copper alloy, fancy type screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fix of size 15 mm bore

Supply and fix in repair 15 mm dia pillar tap, swan neck cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair 15 mm dia pillar tap, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs, shower rose with shower arm of complete all as specified and directed by Engineer-in-Charge

S&F in 10 mm thick toughen glass for shelves in corner. complete all as specified and directed by Engineer-in-Charge

S&F in repairs decorative towel ring recangular chromium plated fixed with (CP) brass screws of approved quality etc complete all as specified and directed by Engineer-in-Charge

S&F in repair Brass Chromium Plated toilet paper holder fixed with (CP) brass screws of approved quality etc complete all as specified and directed by Engineer-in-Charge

Supply and fix Chromium plated 20 mm dia decorative powder coated curtain rods with fixing brackets fixed in repairs etc complete all as specified and directed by Engineer-in-Charge

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including ridge etc complete all as specified and directed by Engineer-in-Charge

Supply and fix pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and directed by Engineer-in-Charge

S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repairs vitreous china wash down water closet (Pedestal pattern) white including fixing bolts with and including plastic water closet seat cover closed pattern with flat bottom and cover and MSCP almn hinges device complete connecting to 'P' or 'S' trap etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs Counter type wash hand basin vitreous China complete platform of granite of size (900x600mm), of Cat Part No S2020153 of CERA COLMID white (5790) of size 500X395x135 mm, PTMT waste coupling, 32 mm dia PVC flexible waste pipe and connecting to stop valve and nahani trap all as directed.

Supply and fix in repairs vitreous China white squatting pan, Orissa pattern of size 580 X 440 mm width with integral foot rest set in cement concrete including flush pipe and connecting to trap / flushing cistren etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs wash hand basin vitreous China, flat back of size 450 X 300 mm including a pair of brackets, PTMT waste coupling, 32 mm dia PVC flexible waste pipe and connecting to stop valve and nahani trap etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs stainless steel kitchen sink matt finish with draining over all size 915 X 460 mm and bowl size 410 X 330 X 160 mm, made out of 1.00 mm thick SS sheet of high quality including a pair of brackets, waste coupling, plug and chain, 32 mm dia PVC flexible waste pipe and nahani trap etc complete all as specified and directed by Engineer-in-Charge

S&F stainless steel kitchen plate rack made out of 0.63 mm thick stainless steel sheet of size 36''x 36''x 10'' with complete accessories including screws etc complete all as specified and directed by Engineer-in-Charge .

S&F in repair wall mixture, with provn for overhead shower etc complete all as specified and directed by Engineer-in-Charge

Supply & Fix in repair health faucet with 8 mm dia 1 mtr long flexible tube wall mounted/hooked all as per specified and directed by Engineer-in-Charge

Supply & Fix in repair hand shower of 1mtr long with all connected accessories etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair bib tap, 15 mm dia, CP cast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass ferrule etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repairs stop valve cast copper alloy, fancy type screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fix of size 15 mm bore etc complete all as specified and directed by Engineer-in-Charge

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

Demolition of plain cement concrete (unreinforced) in ground floor not exceeding 15 cm thick etc complete all as specified and directed by Engineer-in-Charge

Material and labour for rough dressed shahabad stone, 25 mm to 40 mm thick laid over and including 15 mm thick screed bed in cement and sand mortar (1:6) jointed and pointed in cement and sand mortar (1:3) etc complete all as specified and directed by Engineer-in-Charge

Material and labour for joint free / rectified non skid ceramic coloured tiles, 8-10 mm thick as approved by GE (square / rectangular) size of tile 400x400 mm, as in floor etc laid over and including screed bed 15 mm thick in cement and sand mortar (1:6) set and jointed with white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge

Material and labour for coloured glazed ceramic tiles digitally printed premium series of size 350x600 mm , 8-10 mm thick as approved by GE as in dado/skirting or on vertical surfaces, over and including 10 mm thick backing coat in cement and sand mortar (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge

Material and labour for Vitrified ceramic tiles,10 mm thick (square / rectangular) of size 600 x 600 mm of any shade as approved by GE as in floor etc laid over and including screed bed 15mm thick in cement and sand mortar (1:4) and pointed in white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge

All as per Sl item No 37 (here-in-before) but on skirting / Dado.

Material and labour for 16 to 18 mm thick pre-polished granite stone slab of approved shade and colour Jet Black / Telephone Black as in top table, top of WHB, kitchen slab/platform, steps, gate pillars, cills etc or on vertical surfaces including vertical projection, full round moulding the edge laid over screed bed 15mm thick in cement and sand mortar (1:4) jointing & pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite and rubbing polishing to achieve mirror finish etc complete all as specified and directed by Engineer-in-Charge

Material and labour for machine cut cudappah stone slab 20-25 mm thick over cement screed base, full round moulding the edge laid over and including 15 mm thick screed bed in cement and sand mortar (1:6), set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and directed by Engineer-in-Charge

M & L for Chequred cement concrete tiles with pigment 25 cm x 25 cm x 25 mm thick, set, jointed and pointed in neat cement slurry as in floors over and including screed bed of 15 mm thickness in cement and sand mortar (1:6) etc complete all as specified and directed by Engineer-in-Charge

M & L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed by Engineer-in-Charge

M & L for 75 mm thick plain cement concrete (1:4:8) type D2, using 40 mm graded stone aggregate as in sub base etc complete all as specified and directed by Engineer-in-Charge

Demolition of plain cement concrete solid block masonary built in cement mortar all as directed.

M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge

M & L for rendering, 15 mm thick on stone/brick / concrete surfaces in cement and sand mortar (1:6) surfaces finished even and smooth with a coat of wall care putty etc complete all as specified and directed by Engineer-in-Charge

M & L for cutting channels, grooves or rebates n.exc 10 cm girth, and trimming surface on brick/ stone/ concrete surfaces and making good to facings in cement and sand mortar (1:3) etc complete all as specified and directed by Engineer-in-Charge

Taking down chowkats or frames of size not exc 1.5 Sqm each but with shutters (without taking off shutters from the frames) etc complete all as specified and directed by Engineer-in-Charge

Taking down chowkats or frames of size exc 1.5 Sqm but n exc 4.00 sqm with shutters (without taking off shutters from the frames) etc complete all as specified and directed by Engineer-in-Charge

Taking down shutter exceeding of size 1.00 sqm but not exc 2.00 sqm etc complete all as specified and directed by Engineer-in-Charge

Supply and fix IInd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including decorative skin 1.00 mm thick etc complete all as specified and directed by Engineer-in-Charge

S&F 35 mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) all as directed.

Supply and fix PVC door frame made out of PVC section 50 mm x 47 mm made out of 5mm thick plain colour PVC sheet reinforced with MS Square tube etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing Factory Made Solid PVC Moulded Door Shutter, with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2 mm Plain colour PVC Sheet on back face etc complete all as specified and directed by Engineer-in-Charge

Supply and fix galvanised mild steel wire cloth 0.50 nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair galvanised mild steel wire cloth 0.50 nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples etc complete all as specified and directed by Engineer-in-Charge

Supply and fix mild steel butt hinges medium weight cold rolled of size 100 mm etc complete all as specified and directed by Engineer-in-Charge

Supply and fix aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section of cast aluminium alloy and fixed 300 mm long etc complete all as specified and directed by Engineer-in-Charge

Supply and fix aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section of cast aluminium alloy and fixed 200 mm long etc complete all as specified and directed by Engineer-in-Charge

Supply and fix aluminium anodised barrel tower bolt of extruded section 200 mm long etc complete all as specified and directed by Engineer-in-Charge

Supply and fix aluminium anodised barrel tower bolt of extruded section 150 mm long etc complete all as specified and directed by Engineer-in-Charge

Supply and fix aluminium anodised handles of extruded section 150 mm long etc complete all as specified and directed by Engineer-in-Charge

Supply and fixed in repairs 32 mm dia PVC waste pipe (outlet pipe) plain fixed to waste coupling of WHB or Sink etc complete all as specified and directed by Engineer-in-Charge

Supply and fix rotational moulded polyethylene water storage tanks double layer ISI marked conforming to IS 12701-1996 (cylindrical vertical with closed top) and made out of virgin FDA approved polyethylene material of 500 litres capacity hoisted and fixed in position including 20 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to iron pipe and connecting etc complete all as specified and directed by Engineer-in-Charge

All as per Sl item No 65 (here-in-before) but 1000 ltrs.

Material and labour for applying two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces of any description exc 10 cm width or girth including preparation of surfaces and smooth finish with roller etc complete all as specified and directed by Engineer-in-Charge

Material and labour for applying one coat of synthetic enamel paint on old wooden surfaces of any description exc 10 cm width or girth including preparation of surfaces and smooth finish with roller etc complete all as specified and directed by Engineer-in-Charge

Material and labour for applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description exc 10 cm width or girth including preparation of surfaces etc complete all as specified and directed by Engineer-in-Charge

Material and labour for preparation of old steel surfaces and applying a coat of synthetic enamel paint etc complete all as specified and directed by Engineer-in-Charge

Hacking out old broken glass (any thickness size,quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads n'exc 1.5 Sqm. etc complete all as specified and directed by Engineer-in-Charge

Material and labour for glazing with 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each pane etc complete all as specified and directed by Engineer-in-Charge

Material and labour for figured glass, pin headed 5 mm thick 5sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each pane etc complete all as specified and directed by Engineer-in-Charge

Material and labour for preparing Old/New plastered surfaces and applying two coats of oil bound distemper on wall including smooth roller finish etc complete all as specified and directed by Engineer-in-Charge

Material and labour for preparing Old/New plastered surfaces and applying one coats of oil bound distemper on wall including smooth roller finish etc complete all as specified and directed by Engineer-in-Charge

Material and labour for preparing New plasterd surfaces and applying two coats of cement paint on walls etc complete all as specified and directed by Engineer-in-Charge

Material and labour for preparing Old plasterd surfaces and applying one coat of cement based paint on walls etc complete all as specified and directed by Engineer-in-Charge

Material and labour for preparing Old surfaces and applying a layer wall care putty as on wall/ceiling etc complete all as specified and directed by Engineer-in-Charge

S & F powder coated aluminium frame for fixing doors, windows, ventilaters with one or more rebate with suitable size of screws etc complete all as specified and directed by Engineer-in-Charge

S&F for powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws etc. complete all as specified

Labour for dismantling of aluminium door/windows /ventilator shuter from frame and replacement necessary accessories like floor spring, gasket rubber beading, glass of any description,etc. and again reassembled and fixed in the same opening complete all as specifed and directed

Material and labour for false ceiling with Vinyle faced Arm-Gyp-FB, ceiling 600 x 600 x 9mm thick with washable metallized polyster foil backing with Vinyle covered edges, supporting sections shall be of suitable size from same makes embossed on sections and level adjuster duly suspended by 2 mm dia GI wire fixed to roof at 600mm centre to centre as per manufacturere's instructions / specification and etc complete all as specified and directed by Engineer-in-Charge

All as per item No 82 (here-in-before) but expect supporting sections snap grid -dittio-

Supply and fix repairs PVC valveless, syphonic action type, flushing cistern,low level, all accesories etc complete all as specified and directed by Engineer-in-Charge

Supply and fix PVC connections 15 mm size with PTMT nuts of length 600 mm etc complete all as specified and directed by Engineer-in-Charge

S & F of rolled steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410 (Gde-E- 250) quality-A etc complete all as specified and directed by Engineer-in-Charge

M & L for Taking up or down steel tubing 15 mm bore of pipes and connections etc complete all as specified and directed by Engineer-in-Charge

M & L for Taking up or down steel tubing 20 mm bore of pipes and connections etc complete all as specified and directed by Engineer-in-Charge

M & L for 16 mm outer dia of Pipe 3 Layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN - 16) uv stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fitting fixed complete to walls, ceilings or in floors etc complete all as specified and directed by Engineer-in-Charge

M & L for 20 mm outer dia of Pipe 3 Layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN - 16) uv stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fitting fixed complete to walls, ceilings or in floors etc complete all as specified and directed by Engineer-in-Charge

M&L for preparation of old surfaces of wood of any description exc 10cm width/girth incl cleaning and applying one or more coat of french polish etc complete all as specified and directed by Engineer-in-Charge

M&L for preparation of old decorated surfaces of any description and applying one coats of luster paint of desired shade with roller finish including cleaning etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repairs PVC (SWR) pipe 110/100mm bore single socketed in any length with rubber ring fixed to wall/laid in trenches or in floors with approved solvent/adhesive including neceassry stack clamps etc complete all as specified and directed by Engineer-in-Charge

All as per srl item No 93 (here-in-before) but 75 mm bore

Supply and fixing in repair PVC (SWR) bends any radius, for 110/100 mm bore of pipe fixed with approved solvent/adhesive fixed to walls or in floors etc complete all as specified and directed by Engineer-in-Charge

All as per srl item No 95 (here-in-before) but 75 mm bore

Supply and fixing in repair PVC (SWR) 110mm bore 'T' equal or unequal etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing PVC Mirror Cabinet. complete all as specified and directed by Engineer-in-Charge

M & L for Second class hardwood of sectional area Exc 5 Sqcm & n.exc 15 Sqcm clean sawn at 25 cm centres as in battens for roof tiles etc complete all as specified and directed by Engineer-in-Charge

M & L for Roof tiles, Mangolare pattern, interlocking at side joints, laid dry in repair etc complete all as specified and directed by Engineer-in-Charge

M & L for Ridge or hip tiles to suit Mangalore pattern of roofing tiles as in repair bedded and jointed in cement and sand mortar (1:6) etc complete all as specified and directed by Engineer-in-Charge

Material and labour for special treatment to sunken slab floor incl WC trap etc including cleaning and preparing the surface area for carrying out membrane water proofing treatment, then injection grouting the weak areas on the concrete surface with cementitious grout and applying 10mm thick cement plaster in CM 1:4. Then providing and laying Mineral Top APP (Atactic Polypropylene Polymer) modified prefabricated 5 layer 4mm thick water proofing membrane, black finished rainforce with non woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 Litre per Sqm by the same membrane manufacturer of density at 25ºC, 0.87-0.89 Kg per litre and viscosity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torach and sealing all joints etc and preparing the surface complete. and providing PCC 1:5:10 type E2 using 40mm graded mechanically crushed stone aggregates in sunken slab and 75mm thick PCC 1:4:8 type D2 using 40mm graded mechanically crushed stone aggregates as base, 40mm bore GI pipe, light grade of length not less that 50 cm as spout, complete all as specified and as directed Make : Super Thermolay MT of STP / TEXSA / FosRoc Note : Work has to be carried out strictly by the authonticated applicator of the manufacturer and as per manufacturers specification as approved by GE.

M&L for providing water proofing treatment on roofs, as per manufacturer's instructions and as specified after taking down/out as existing tar felt at site :- (a) Cleaning the newly plastered surfaces with wire brushes and applying a coat of bituminous primer @ 0.30 ltrs/sqm and allow to dry. (b) Applying and laying torch APP polymer modified bituminous membrane 3 mm thick with non woven polyester mat as reinforced weighing not less than 3 kg/sqm by thermo fusion process as per manufacturers specification including applying one coat of aluminum paint. Note:- Removed thar felt shall be removed out of MD Land and spilled over bitumin if any on any surface shall be made good to the satisfaction of Enginer in Charge, no extra payment shall be claimed by the contractor in this account

M&L Rendering 10 mm thick in cement and sand mortar (1:3) by using 100% coarse sand on roof mixed with & including WPC @ 3% by weight of cement and finished the surfaces even and smooth without using extra cement etc complete all as specified and directed by Engineer-in-Charge. includning taking down existing plaster

Supply only integral water proofing compound

M & L 6mm thick asbestos cement, corrugated or semi corrugated sheets in roof walls fixed with 'L' type or 'J' type or cranked hook bolts, washer etc including dismantling etc complete all as specified and directed by Engineer-in-Charge.

Fixing only 6mm thick asbestos cement, corrugated or semi corrugated sheets in roof walls fixed with 'L' type or 'J' type or cranked hook bolts, washer etc including dismantling etc complete all as specified and directed by Engineer-in-Charge.

Avinash B Kullal

Arihant Construction

M/s IBEX Engineers and Contractors

M/s A G Gund

M/S. M. F. Sharif & Co.

M/s. N D Karande

OM SAI ASSOCIATES