GE/C-79/2023-24 REPAIR TO PCC/ FOOTPATH, CHQ TILES, DRAINS, FENCING AND MISC WORKS AT ARJAN VIHAR AND PRATAP CHOWK AND ADJOINING AREA OF AGE B/R-II UNDER GE (CENTRAL) DELHI CANTT-10

Amount

Demolition of cement concrete in ground floor and pavings n exc 15cm thickness (below or above ground level) complete all as directed.

M& L for rubber moulded Chequered cement concrete colour tiles 30 cm x 30 cm x 25mm thick with mixture of grey cement & pigment set jointed and pointed in neat cement slurry in floors including 15mm thick screed bed in C M 1:6 complete all as specified and as directed.

M & L Machine pressed precast concrete rubber moulded interlocking dark coloured paver block any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 Grade all as specified and disposing to debries etc all as directed by Engr-in-Charge.

M&L sand filling under floors or in foundation including watering and consolidation

Demolition of brick work built in cement mortar in any description and position, complete all as specified.

Excavation in trenches (soft/loose soil) n exc. 1.5m wide and n exc 1.5 m in depth for foundation etc. and getting out all as specified.

M & L Cement concrete type D-2, 1:4:8 (40 mm graded stone aggregate) in foundations, filling and mass concrete all as specified.

M&L for brick work with sub class 'B' brick straight or curved on plan exc 6 metre mean radius with old size bricks, built in cement mortar 1:6, complete all as specified.

M&L for brick work with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick walls with old size bricks, built in cement mortar 1:4, complete all as specified.

All as per item no 10 before but except bricks

M&L cement concrete 1:3:6 type C2 using 40mm graded aggregate in surface channels and drains etc incl demolition of existing drain, surface channel all as specified and disposing of debries etc as directed by Engr-in-Charge.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1 : 4 mixed finished even and smooth without using extra cement including taking down old plaster complete all as specified.

M&L preparation of newly plastered surfaces of work and applying two coats of cement base paint over a coat of alkali resistant primer all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.

M & L for removing excavated material exc. 250m but not exceeding 500m and depositing where directed all as specified.

M&L for cement concrete 1:3:6 type C1(using 20mm graded stone aggregate) as in blocks for hold fast, coping, benching etc. including weathering, slightly rounded or chamfered angles or throating including form work to concrete surfaces, complete all as specified

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end etc complete all as specified.

Dismantling post or struts (wood or RCC) of any section any description and in any position including taking out embedded portion in concrete, brick work, masonry etc and making good the disturbed surfaces to match with existing surfaces complete all as specified and directed

Dismantling fencing wire mesh any type fixed in any situation complete all as directed.

Excavating in posts holes (or similar holes) in soft/loose soil each n.exc 0.50 Cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm complete all as specified and directed.

S&Fin repairs Framed work as in Fencing Posts, Swan necks, doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of fencing wire or other covering. etc. also fastening and fixing complete incl cleats, brackets, complete of Fe 410-W (Gde e-250) quality B complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any of standards, rails, straining bolts, etc including provision of binding wire complete all as directed.

Supply only Chain link MS galvanised fencing any size or type complete all as directed.

S&F Mild Steel round bars in fencing etc complete all as specified and as directed.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed to other, or screwed both ends, each screwed end to be fitted with washers and hexagonal or square nut length of bolt n.exc 5cm long and dia of neck 5 to 10mm complete all as specified and directed.

Preparation newly or previously untreated steel surfaces of any description over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of red oxide complete all as directed

Preparation of old painted surface of steel and iron surface of any description and in any position over 10 cm width or girth and M&L for applying one coat of synthetic enamel paint complete all as specified and directed. by Engr-in-Charge.

M & L for reinforced cement concrete M-25 slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like incl demolition all as specified and directed.

Supply and fix TMT bars,6mm to 8mm, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) but not less than 0.9 mm dia conforming to Fe-410 - 0, complete all as specified.

M & L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified.

S&F DWCPE(SN4) 200mm dia (Internal Dia) pipes,snap fit coupler and rubber ring incl testing and laid and properly jointed laid in trenches to a level on concrete bed complete all as specified.

S&F DWCPE(SN4) 150mm dia (Internal Dia) pipes,snap fit coupler and rubber ring incl testing and laid and properly jointed laid in trenches to a level on concrete bed complete all as specified.

S & F in repair of steel rolling shutters without ball bearing, as specified incl top cover anchoring rod hasp & staple and one shop coat of primer before erected in position as directed complete manual type thickness of lath 1.25mm.

S & F in repairs roller ball bearing (ISI marked) for 32/40 mm dia pipe shaft complete all as specified and as directed by Engineer-in-charge.

Supply and fix in replacement of broken cast iron (sand cast) soil, waste and vent pipes in any length, with or without ears, with cement joints, laid in trenches or in floors or fixed to walls with FI clamps etc, bore of pipe 100mm complete all as specified and directed.

Supply and fix in replacement of broken cast iron (sand cast) soil, waste and vent pipes in any length, with or without ears, with cement joints, laid in trenches or in floors or fixed to walls with FI clamps etc, bore of pipe 75mm complete all as specified and directed.

Supply and fix cast iron Bends (sand cast) (any radius), diminishing pieces or tapers soil/waste pipes 110mm dia bore with or without duck's foot or heel rest in any length (larger bore measured) complete all as specified and directed.

Supply and fix cast iron Bends (sand cast) (any radius), diminishing pieces or tapers soil/waste pipes 75mm dia bore with or without duck's foot or heel rest in any length (larger bore measured) complete all as specified and directed.

S&F in repair 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with clamps etc including taking out/dismentling of old pipe complete all as specified.

S&F in repair 75 mm dia of any radius PVC (SWR) bends

M & L for 18-20 mm thick green Granite stone(udaipur green) work (table rubbed and polished) fixed with neat cement paste as fixing material as in steps, jambs, pillars, window cills, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite,front and side of slab moulded and polished complete all as specified and as directed by the Engineer-in-Charge.

S&F of display board of size minimum 1 sqmt area of coloured acrylic sheet of minimum 10mm thickness sheet to show house number/cooupant (Offrs) name, display board will show house number in 3 digit & words like G, 1st floor to 5th floor on board, size of word should be either 25MM x 15MM or instructed by Engineer-in-harge, display board will also contain 11 number of name plate of size 30CM x 5CM x 6MM with fixing/detachable arranements & one 1060 sign. This items includes dismantling removal of old board. Display board will be ixed properly on the wall.

M & L dismantling floor or wall tiling including cement mortar bedding, removing serviceable tiles to store and rubbish off the premises, complete all as specified & directed.

Schedule of Credit

Maninder Singh Lohia

Dhirendra Singh & Sons

yameen enterprises

M/S Parmod Johar

M/s SAAR ENGINEERS

VED PRAKASH ARORA

a.k constructions

DEV CONSTRUCTION