SPECIAL REPAIRS TO SEWGE SYSTEM PROVISION OF VIEW CUTTERS TO BOUNDARY WALL SPECIAL REPAIR TO FLOOR TILES AT MISC LOCATIONS AND PROVISION OF CERTAIN MAJOR REVENUE AND MINOR WORKS

Amount

Excavation in trenches not exceeding 1.50 m wide and not exceeding 1.50 m deep for foundation etc and along the existing sewage line carefully for placing taking out SGSW/PVC pipe and getting out in any type soil including cutting of roads and similar works complete all as specified and directed.

Excavation in trenches exceeding 1.50 m deep and not exceeding 3.00 m deep along the existing sewage line carefully for placing taking out SGSW/PVC pipe and getting out in any type soil including cutting of roads and similar works complete all as specified and directed.

Material and labour for underground HDPE double wall corrugated sewage and drainage pipes including all fittings of internal dia 150 mm bore SN-8 grade (ISI marked) laid in trenches and jointed including demolition and breaking up old u/s drain pipe (Double wall corrugated PVC/SGSW pipe of any type) set in cement concrete, internal dia 150 mm complete all as specified and directed.

Material and labour for underground HDPE double wall corrugated sewage and drainage pipes including all fittings of internal dia 200 mm bore SN-8 grade (ISI marked) laid in trenches and jointed including demolition and breaking up drain pipe (Double wall corrugated PVC/ SGSW pipe of any type) set in cement concrete, internal dia 200 mm complete all as specified and as directed.

M&L reinforced concrete pipes 200mm bore, class NP2, laid and jointed complete with collars and incl demolition and breaking up of old drain pipe set in cement concrete, complete all as specified and as directed.

M&L for concrete bed to drain pipe including packing under and haunching against the side of drain pipe after they are laid and tested in PCC 1:3:6 type C-2 for 150mm dia complete all as specified and directed.

M&L for concrete bed to drain pipe including packing under and haunching against the side of drain pipe after they are laid and tested in PCC 1:3:6 type C-2 for 200mm dia complete all as specified and directed.

Cutting into existing manholes for connecting new drains 150 mm bore, making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1, smooth finished and reforming benching as required complete all as specified and as directed.

Cutting into existing manholes for connecting new drains 200 mm bore, making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1, smooth finished and reforming benching as required complete all as specified and as directed.

Returning and filling soil in layers not exceeding 25cm thick each layer including spreading leveling, watering and well ramming complete all as specified and directed.

Removal of surplus soil to a distance not exc 50 m and depositing where directred at a level not exc 1.50 m above the starting point complete all as specified and directed.

M&L PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in foundation, filling for fencing post and mass concrete etc, complete all as specified and directed.

Demolition of brick work or stone boulder/ PCC block masonry, built in cement mortar or cement lime mortar incl all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L Pre-cast PCC 1:3:6 type C1 (using 20 mm graded stone agg) cement concrete block masonry with solid blocks exc. 10cm in width and set in cement mortar 1:6 complete all as specified and directed.

M&L for Providing cement concrete in PCC coping 1:2:4 type B1 (using 20mm aggregate stone aggregate) including necessary form work of any description and in any position not otherwise specifically provided complete all as specified and directed.

M & L for cement concrete 1:2:4 type B1(using 20 mm graded crushed stone aggregate) as in surface channel or drain, benching in manhole etc finished even and smooth with using extra cement complete all as specified and as directed.

M&L 10 mm thick cement plaster in CM 1:4 on fair faces of brick/ concrete block stone/ concrete including WPC as per manufacturer instructions finished even and smooth without using extra cement complete all as specified and directed.

M&L 15 mm thick cement plaster in CM 1:4 on fair faces of brick/ concrete block stone/ concrete including WPC as per manufacturer instructions finished even and smooth without using extra cement complete all as specified and directed.

Supply only Liquid water proofing compound of approved make (ISI marked) complete all as specified and directed.

M&L Preparation of new plastered surfaces and applying three coats of white wash on walls complete all as specified and directed.

Demolition of reinforced cement concrete reinforced of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

M&L Providing precast cement concrete 1:2:4 type B1 using 20mm graded stone aggregate, set in CM 1:4 as in cover slab and similar work incl necessary formwork complete all as specified and directed.

M&L MS TMT bars 10 mm dia and above , cut to length ,bent to shape required , including cranking , bending , spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in reinforcement complete all as specified and directed.

M&L for mild steel TMT bars 6 mm to 8mm dia, cut to length ,bent to shape required , including cranking , bending , spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in reinforcement including 16mm plain bars as in rungs fixing with manholes etc complete all as specified and directed.

S&F in 600mm X 600mm rectangular FRP manhole cover with frame 50KN/5MT Light duty confirming to relevant EN-124 specifications. Products shall be tested as per EN-124 for load testing and permanent set complete all as specified and directed.

Surface excavation n exc 30 cm deep and avg 15 cm deep and getting out in soft/loose soil and removing the same outside MD land complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum getting out ,returning,filling in and ramming earth or broken rubble mixed with earth, in layers n exc 25 cm in hard/dense soil,watering and removing surplus soil to a distance n exc 50 m and making good surface in hard/dense of soil complete all as specified and directed.

M&L Cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed .

S & F mild steel work in framed brackets of angle or tees with web flanges cut to shape, drilled and countersunk of screw, including bending and welding angles, as necessary, gusset plates, riveting, etc. n exc, 10 kg each bracket, and hanging also fastening and fixing complete conforming to Gde Fe 290, Gde E-165 complete all as specified and directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed both end each screwed end to be fitted with washers and one hexagonal or square nut, but length of bolt exc 10 cm and n exc 15 cm long of 5 to 10 mm dia of neck complete all as specified and as directed

S&F steel work in tublar truses including special shaped washer etc complete using ERW or induction butt welded tubes confirming o IS 1161-1998 grade St 240 complete all as specified and directed.

S & F mild steel plate (plain or chequered) channels, square cut or notched (ordinary or counter sunk), forming holes with riveted, bolted or welded attachement etc. and hanging also fastening and fixing complete conforming to Gde Fe 410 W (Gde E-250 Quality A) complete all as specified and directed.

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165

M&L 75mm thick PCC type D-2 (1:4:8) using 40mm graded stone aggregate as in sub base to floor surface finished even and fair complete all as specified and directed

Formwork to sides of concrete foundations, footings, bases of columns, rafts, plinth beam and similar work;vertical or to batter complete all as specified and directed.

M&L RCC M25 (20mm aggregate) for foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, lintel beams etc.; basement slabs,under-reamed piles and mass concrete complete all as specified and as directed.

M & L mild steel TMT bar 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-S complete all as specified and as directed.

M & L in repairs walling of random rubble, uncoursed, Bangalore type masonry well bonded bedded solidly hearted built in CM 1:6, extra over stone walling for hammer dressing to face stones and dressing of face beds and joints as specified, key pointing to random or polygonal rubble, uncoarsed or brought upto courses in CM 1:4 of any description all as specified and directed.

M&L 15 mm thick cement plaster in CM 1:6 on fair faces of brick work/concrete etc surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L RCC type B0 1:2:4 (12.5mm graded aggregate) as in floor/roof Slab and roof projection Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like similar work complete all as specified and directed.

M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work n exc 200mm thick complete all as specified and directed.

Taking down chowkhat or frame (wooden/steel) exceeding 1.50 Sqm and not exceeding 4.0 Sqm each with shutter (with out taking off shutters from the frame) all as specified and as directed.

S&F anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, 03 Nos hinges, anodised aluminum snap beading screws etc,complete all as specified and directed.

Supply and Fixing 10-12mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

Supply and fixing 12mm thick Veneered particle board, solid core, exterior grade, with decorative face veneers for both faces, lamination, including side beading fixed with screws complete all as specified and directed.

S&F 4 mm thick sheet glass ordinary quality and glazing complete in square exc 0.50 sqm in each pane complete all as specified and directed.

Supply and fixing MS Mortice lock, 4 levers vertical type, size 100 mm for fixing to glass and all as specified and directed

M&L Second class hard wood plain, solid, straight Chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F 2nd class hard wood 35mm thick Factory made plain framed panelled shutter any number of panels with lock rail and panel of 9mm BWP commercial ply or 12mm veneered partical board with commercial veneering on both faces. The size of rail and stile as per IS 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F Aluminium, anodised, barrel tower bolts 200mm long of extruded section complete all as specified and directed.

Preparation of new wood or wooden based surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed

S&F MS butt hinges medium weight cold rolled 100 mm size complete all as specified and directed.

S&F in repair looking mirror of size 600mm x 450mm on commerical ply wood 6mm thick with PVC/ wooden moulding beading fixed to wooden plugs with chromium plated brass, screws and cup, washers, aluminium frame and fixed complete all as specified and directed.

Supply and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) frame work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws,included rubber beading complete all as per architectural drawings complete all as specified and directed

Supply and fixing powder coated aluminium shutters of window, doors and ventilator, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodisedaluminium fittings such as peg stays150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, star lock, included rubber beading all complete as per architectural drawings and complete all as specified and directed

S&F 4 mm thick sheet glass ordinary quality and glazing complete in square n exc 0.50 sqm in each pane complete all as specified and directed.

S&F stainless steel wire cloth, 0.45mm nominal dia of wire & average width of aperture 1.40mm with aluminium wire staples complete all as specified and directed.

S&F in aluminium anodised grill (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC15) of approved design/pattern(DG 104), with approved standard section and fixed to existing window frame with CP brass/stainles steel screwnot less than 50mm and @ 200mm c/c, incl cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised alu standard section ( 28mm x 19mm x 2mm thick) around the opening, all complete as specified and directed.

S&F aluminium louvers with levers and locking arrangements suitable for fixing 100mm wide 4 to 6 nos frosted glass complete all as specified and directed

S&F Aluminium body door closer hydraulically regulated,designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel covert governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed

M & L Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick screed bed in CM 1:4 to recieve tiles and Dismantling of floor, hearth or wall tiling incl cement mortar bedding and removing debris and depositing complete all as specified and as directed.

Material and labour for Vitrified ceramic tiles of 10mm thick and area of each exceeding 0.36 Sqm as in skirting over 10 mm thick rendering in CM 1:4 dado/skirting and Dismantling of floor, hearth or wall tiling incl cement mortar bedding and removing debris and depositing complete all as specified and as directed.

Material and labour for 25mm thk PCC 1:2:4 type B-0 using 12.5 mm graded agg as wearing coat for laying floor finishes, finished fair to receive tiles complete all as specified and as directed.

M&L for anodised aluminium snap grid frame work for false ceiling of size of grid 605 x 605mm or as per manufacturer's instruction including necessary scaffolding, notching and prepared holes including taking down existing false ceiling and frame complete all as specified and as directed

M&L for hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, provision of PVC protected sheeting and its removal after fabrication and supporting hanger comprising of mild steel rod, J bolt with necessary washers, bolts and nuts, for securing frame work to ceiling and to the snap grid complete all as specified and as directed

M&L for providing 12mm thick seamless calcium silicate fire proof ceiling made out of required size board of siliceous and calcareous material reinforced with cellulose fibre, meets fire ratings as per BS 476 Part 5, 6 and 7 class 1 and P, water resistant and thermal insulated, tested as per fire retardant IS 15061-2002 for excellent results, fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finishing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish all as per manufacture instruction complete all as specified and as directed. (Frame work for ceiling shall be measured and paid separately) Note: Contractor has to submit fire resistant/retardant certificate of ceilling from the manufacturer at the time of sample approval.

Demolition of cement concrete (unreinforced) of any description in ground floor not otherwise specifically provided for, complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons laid bedded in any mortar etc complete all as specified and directed.

M&L hard core of broken stone of guage n exc 63mm deposited spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified and as directed

M&L PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete of any description, complete all as specified and directed.

Material and labour for 100 mm thick, plain cement concrete 1:2:4, type B2 using 40 mm graded stone aggregate as in paving's, hard standings and similar work, surface finished even and smooth without using extra cement complete all as specified and directed. .

Material and labour for 100mm thick PCC type D-2 (1:4:8) using 40mm graded crushed stone aggregate as in sub base of floor surface finished even and fair, complete all as specified and directed

M&L pre polished cement concrete chequered tiles of size 300mm x 300mm x 25mm thick jointed in neat cement slurry and pointed in white or coloured cement to match the floor including 20mm thick screed bed in CM 1.4 complete all as specified and directed.

M&L for machine pressed pre polished precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 Grade, over sand cushion with grey cement and no pigment complete all as specified and directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum in soft/ loose soil and getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed.

S&F MS angle iron Hand rails, fencing posts, flat iron including embeding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F in framed work as in doors or gates of angle tubes or other section with gusset plates, rails, braces,guard bar etc., complete, to be prepared for hanging or sliding with and including hinges or steel hanging door fittings (exclusive of steel sheeting or other covering) and hanging; also fastening and fixing Fe 410 -W (Gde- E- 250) quality-A complete incl removal of old MS work complete all as specified and directed.

S&F prepainted galvalume alu zinc coating based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /claddding to wall, fix with self tapping screws with necessary washers/welding complete all as specified and directed.

S&F 0.8mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

M&L Providing two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces over 10 cm width or girth including preparation of new steel surfaces complete all as specified and directed.

Surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for Preparation of old painted surfaces of steel and applying one coat of synthetic enamel paint over 10 cm width or girth, not other wise described complete all as specified and as directed.

Supply and fixing 15mm bore galvanized steel water tubing, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors including taking up or down old steel tubing complete all as specified and directed.

Supplying and laying of 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and taking out old unsericeable steel/plastic/cpvc water tubing and connections complete all as specified and directed.

Supplying and fixing in repairs of 20mm outer dia Female Brass Threaded Adaptor (FTA/ FBTA CPVC complete all as specified.

Supplying and fixing in repairs 20mm outer dia CPVC brass elbow all as specified and directed.

Supplying and laying of 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and taking out old unserviceable steel/plastic/cpvc water tubing and connections complete all as specified and directed.

Supplying and fixing in repairs of 25mm outer dia Female Brass Threaded Adaptor (FTA/ FBTA CPVC complete all as specified.

Supplying and fixing in repairs 25mm outer dia CPVC brass elbow all as specified and directed.

Supply and fixing 25 mm bore galvanized steel water tubing, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors including taking up or down old steel tubing complete all as specified and directed.

Cutting chases pinning in making good to facing where required for concealed water tubing any size and making good with CM 1:3 cutting not exc 10cm girth in brick/stone walls complete all as specified and directed.

Supply and fixing 40 mm bore galvanized steel water tubing, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors including taking up or down old steel tubing complete all as specified and directed.

S & F in repairs 40 mm dia gun metal gate valve with Iron wheel screwed both ends for Iron pipe .

S & F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/trenches bore of pipe 75 mm with PVC clamps and saddles including taking down old existing pipes and dismantling of cast iron/RCC/PVC drain pipes jointed in cement mortar and taking out from trenches or walls of any bore including fittings complete all as specified and as directed

S & F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/trenches bore of pipe 110 mm with PVC clamps and saddles including taking down old existing pipes and dismantling of cast iron/RCC/PVC drain pipes jointed in cement mortar and taking out from trenches or walls of any bore including fittings complete all as specified and as directed

S & F in repairs PVC (SWR) bends of any radius with access door bore of pipe 110 mm complete all as specified and as directed.

S & F in repairs PVC (SWR) bends of any radius with access door bore of pipe 75 mm complete all as specified and as directed.

Supply and fix 110mm dia PVC bend any radius complete all as specified and as directed.

Supply and fix 75mm dia PVC bend any radius complete all as specified and as directed.

S&F in repairs Wash basin vitreous china (flat back or angle back type) size 580x400mm including taps waste chain and plug and porceline stopper but brackets including cutting for and pinning in ends of brackets or erecting stand with waste pipe, complete all as specified and directed.

S & F in repairs Bib taps cast copper alloy chromium plated fancy type screwed down screwed for iron pipe or for brass ferrule and fixed for 15 mm bore complete all as specified and as directed.

S & F in repairs 75/110 mm bore PVC (SWR) floor trap with grating incl jointing with solvent cement

S & F in repairs 15 mm dia stop/angle valves of cast copper alloy fancy type chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe complete all as specified and as directed.

Material and labour for Non skid coloured ceramic tiles 7 to 8 mm thick matt finish(square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile incl screed bed 15 mm thick in CM (1:6) complete all as specified and directed.

S&F CP Concealed stop cock, Regular body with adjustable wall flange screwed down screwed for iron pipe 15mm bore. including taking down existing one complete all as specified and as directed.

M & L for coloured Glazed ceramic tiles in vertical surface 350mmx250mm x7mm / 450X350X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering or bedding layer in cement mortar 1:3 complete all as specified and directed.

S&F in repairs Overhead Shower rose 125mm size (Brass Chrome Plated) complete all as specified and as directed.

S&F in repairs of brass chromium plated tubular towel rail 20 mm dia brass D type 60 cm long between flanges complete all as specified and as directed.

S & F in repairs pillar tap with capstan heads chromium plated fancy type screwed down high pressure with or without letter 'Hot' or 'Cold' with long screwed shanks and flynuts screwed for galvanised iron pipe and fixed complete for 15 mm bore complete all as specified and as directed.

S&F in repairs, 10 litre capacity PVC flushing cistern, syphonic action type, low level, white, with inlet, ball valve,pvc flush pipe, float and handle incl brackets and waste pipe complete., making proper fixing and hanging arrangements all as specified and as directed.

S&F 150 mm dia round/square grating of CP with or without hole including Jointed to PVC pipe complete all as specified.

S & F in repairs vitreous china wash down water closet (Pedestral pattern) EWC white incl plastic water closet seat cover and mild steel chromium plated or aluminium hinging device and connecting to 'P' or 'S' trap incl connecting flush pipe with flushing rim complete all as specified and as directed.

Supply and fixing in repairs plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device all as specified and directed.

S&F in repairs 40 mm Waste coupling fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed one complete all as manufactures and all as specified

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600 mm all as specified and as directed

S&F in repairs Vitreous China, half stall Urinal (back or corner wall type), complete including providing and fixing plugs, Urinal spreader, CP push cock, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and as directed

S&F Urinal spreader of PTMT any colour for fixing with 15mm dia pipe (minimum wt 60 gms) all as specified and directed.

S & F in repair PVC waste pipe 32 to 40 mm dia and length n exc 1m for WHB/Sink/Urinal up to floor trap and fixed complete all as specified

S&F Wash hand basin table counter type 560x400x200mm vitreous china (white) with cantilever CI/Angle iron brackets embedded in concrete block, including long shank pillar tap, Brass chromium plated waste coupling 32mm bore, Waste pipe bottle trap, complete all as specified and as directed.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including taking down existing one complete all as specified and as directed.

S&F Push cock chromium plated cast copper screwed down high pressure fancy type screwed both ends for pipe or union fixed for 15mm bore complete all as specified and as directed.

S&F Rotational moulded polyethylene water storage tank of 1000 Ltrs capacity cylinderical vertical with closed top including 3 Nos GI check nuts and tank nipple of 25mm bore for inlet and outlet, 25mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball hoisted and fixed in position all as specified including taking down of old unserviceable tank complete all as specified and directed.

S & F in repairs 40 mm dia gun metal gate valve with Iron wheel screwed both ends for Iron pipe .

S&F in repairs CP 2 way bib cock with wall flange fancy type screwed down screwed for iron pipe in repairs 15mm bore complete all as specified and as directed.

S&F in repairs 40mm bore unplasticised PVC pipe of pressure rating 10 kg/Sqcm fixed complete to walls, ceiling or laid in floors complete all as specified and directed.

S&F Gun-metal Globe or gate valves 20 mm nominal bore dia with gate with iron wheel head screwed both ends for iron pipes and fixed complete all as specified and as directed

Supply and fixing 15mm bore galvanized steel water tubing, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

Supplying and fixing of 20mm outer dia Female Brass Threaded Adaptor (FTA/ FBTA CPVC complete all as specified.

Supplying and fixing of 20mm outer dia CPVC brass elbow and all as specified.

Supplying and laying of 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed

Supplying and fixing of 25mm outer dia Female Brass Threaded Adaptor (FTA/ FBTA CPVC complete all as specified.

Supplying and fixing of 25mm outer dia CPVC brass elbow and all as specified.

Supply and fixing 40 mm bore galvanized steel water tubing, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S & F 40 mm dia gun metal gate valve with Iron wheel screwed both ends for Iron pipe complete all as specified and directed.

S & F PVC waste pipe 32 to 40 mm dia and length n exc 1m for WHB/Sink/Urinal up to floor trap and fixed complete all as specified

S&F 40mm bore unplasticised PVC pipe of pressure rating 10 kg/Sqcm fixed complete to walls, ceiling or laid in floors complete all as specified and directed.

S & F 75/110 mm bore PVC (SWR) floor trap with grating incl jointing with solvent cement complete all as specified and directed

S&F PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and directed

S & F Bib taps cast copper alloy chromium plated fancy type screwed down screwed for iron pipe or for brass ferrule and fixed for 15 mm bore complete all as specified and as directed.

S & F 15 mm dia stop/angle valves of cast copper alloy fancy type chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe complete all as specified and as directed.

Supply and fix 110mm dia PVC (SWR) pipe single socket in any length with rubber ring joint fixed to wall or laid in trenches complete all as specified and as directed.

Supply and fix 75mm dia PVC (SWR) pipe single socket in any length with rubber ring joint fixed to wall or laid in trenches complete all as specified and as directed.

S&F in repair Brass Chromium plated wall mixer for mixing hot & cold water screwed down for 15mm bore iron pipe complete all as specified and directed.

S&F 32 in repairs mm Waste Coupling fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and all as specified

M&L for machine pressed pre polished precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade over sand cushion with grey cement and no pigment complete all as specified and directed.

M&L for joint free non skid coloured ceramic tiles 7 to 8 mm thick area of each tile not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm thick screed bed in cement mortar 1:4 for laying floor finishes and Dismantling of floor, hearth or wall tiling incl cement mortar bedding and removing debris and depositing complete all as specified and as directed.

M&L for ceramic coloured tiles of size 350mmx250mm/ 300mm X 450mmx7 to 8 mm thick, on vertical surfaces, set and jointed in neat cement slurry and pointed in coloured / white cement to match the tiles inc rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces as in backing coat to receive wall tiles etc and Dismantling of floor, hearth or wall tiling incl cement mortar bedding and removing debris and depositing complete all as specified and as directed.

M&L for complete removal and preparation of old plastered surfaces of wall by using pressure washer, removal all dirt and dust and applying two coats of exterior emulsion weather proof paint over a coat of primer complete all as specified and as directed.

M&L Providing precast cement concrete 1:2:4 type B1 using 20mm graded stone aggregate, set in CM 1:4 as in cover slab and similar work incl necessary formwork and Demolition of reinforced cement concrete reinforced of any description and in any position not otherwise specifically provided complete all as specified and directed.

Taking down cement plaster on brick or stone walls, or concrete walls including raking out joints, hacking for key, scrubbing down with water, etc.,including removal of rubbish off the premises and leaving the work clear of any plastering and material and labour for 10mm thick cement plaster in CM (1:6) on brick work or concrete surfaces rendering is to be even & smooth without using extra cement for internal walls complete all as specified and directed.

M&L for rendering 15mm thick cement plaster in CM 1:4 on fair faces of brick work or concrete surfaces on external surfaces finished even and smooth without using extra cement including taking down cement plaster on brick or stone walls, or concrete or ceilings etc., including raking out joints, hacking for key, scrubbing down with water, etc., including removal of rubbish off the premises and leaving the work clear of any plastering complete all as specified and directed.

M&L 10 mm thick cement plaster in CM 1:6 on fair faces of brick work/concrete etc surfaces finished even and smooth without using extra cement complete all as specified and directed.

M & L for preparation of new plastered surfaces of walls applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and applying two finishing coat of oil bound distemper over a coat of primer complete all as specified and directed.

M&L Preparation of newly plastered surfaces of walls and applying two coats cement base paint on walls over a coat of alkali resistant primer of any description as specified and directed.

M&L for Preparation of old decorated surfaces of walls by using pressure washer, complete removal existing treatment,applying one coat of wall care putty and then applying two coats of premium oil bound distemper over one coat of primer as per manufauture instruction of required shade complete all as specified and directed.

Material and labour for Preparation of old plastered or unplastered surface complete removal existing treatment, of ceiling and walls brooming down or steel wire brushing down smoke soot, moulds mass, efflorescent , trading, oil, greasy spots and applying one coat of white wash complete all as specified and directed.

M&L Granite 18 to 20mm thick (table rubbed and polished) in steps,Jamps, Pillars, Windows, cills, platforms and like CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigments to match with marble shade of Granite over screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar (1:4) all as specified and as directed. Note : (i) The Unit rate quoted is included for demolition of old Stone Slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar. (ii) Cost of rounding of stone deem to be included in unit quoted rate.

Taking down and refixing in the same opening shutters exc 1 sq.m and n exc 2 sq.m each with some repairs (Resecuring or easing and adjusting) works of wooden door/ skelton door of any type complete all as specified and as directed.

Taking down and refixingin the same opening shutters exc 2 sq.m each with some repairs (Resecuring or easing and adjusting) works of wooden door/ skelton door of any type complete all as specified and as directed.

Taking down chowkhat or frame (wooden/steel) not exceeding 1.5 Sqm each with shutter (with out taking off shutters from the frame) all as specified and as directed.

Supply & Fixing solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube and edges will be painted to match with printed sheet fixed in opening as per specification & drawings complete all as specified and as directed.

M&L for Factory Made Solid PVC Moulded Door Shutter, with particle board core 28 to 30 mm thick (stiles),with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face including neccessary fitiings etc complete as specified and directed.

S&F butt hinges size 100 extruded aluminium alloy with galvanised mild steel hinges pin anodised and fixed C-21 complete all as specified and as directed.

S&F 125mm long Extruded aluminimum alloy handles, fabricated type complete all as specified and as directed.

Supply and fixing aluminium handles cast type anodized 150 mm long complete all as specified and as directed.

Material and Labour for Spreading ribbed soil in trenches as in cable cushioning all as per IS 1255-1983 and as directed. Note :- (i) Excavated approved soil shall be ribbed by using sieve to separate composite particles etc as per IS and refilling in trenches before laying of cable 8 CM and 15 CM after laying of cable. This is then gently punned down to a depth of 10 cm above the top of upper most cable (ii) For the purpose of measurement only punned thickness shall be considered for payment.

Material and labour for Cutting existing road/PCC/Drain for laying of GI or any type of pipe including necessary earth work, excavation exc 600mm depth but not exc 1mtr depth, 800 mm wide including making good existing surface with 150 mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate, complete all as specified and directed. Note :- The tenderer shall take into consideration for following points while quoting rate for this item and the unit rate is deemed to be inclusive for :- (i) Earth work and excavation in any type of soil (ii) Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick ,complete all as specified and as directed. (iii) Removing excavated material to out side MD land. (iv) Laying of any type/any bore of pipe in trenches including taking down. Supply of pipe shall be measured and paid separately (v) 150 mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate as in road to make good existing disturbed surfaces.

Material and Labour for well burnt sub class ‘B’ bricks as mechanical protection for under ground LT electric cables laid along with length of the bricks equal to the width of the trench complete all as speified and directed .

Supply and Fixing GI tubing light grade 50 mm dia fixed on walls/pole/ laid in trenches as protection pipe for under ground cable including provisioning of specials and clamps etc complete all as speified and directed.

Material and labour for 3.5 core 35 Sqmm XLPE insulated heavy duty electric cable with aluminium multi stranded conductor 1100 volts grade served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall sheathed laying in trenches/cable ducts, fixed to wall/pole, complete all as specified and directed. Make : Havells/ Polycab/ RPG Asian Note - Earthwork and bricks shall be measured and paid separately in respective items.

Material and labour for 3.5 core 25 Sqmm XLPE insulated heavy duty electric cable with aluminium multi stranded conductor 1100 volts grade served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall sheathed laying in trenches/cable ducts, fixed to wall/pole, complete all as specified and directed. Make : Havells/ Polycab/ RPG Asian Note - Earthwork and bricks shall be measured and paid separately in respective items.

M & L for Point wiring with PVC insulated FRLS 4 sq mm multi stranded copper conductor cable 1100 Volts grade drawn into and including rigid non metalic PVC conduit/casing caping medium grade not less than 19/20 mm ( ISI marked ) with all fitting and fixing accessories including sunk in pressed steel chromium plated terminal boxes, concealed in wall/surface/roofs/floor/ceiling etc as per site requirement and making & matching the existing surface ) white bakelite sheet cover for mounting switches, Sockets, Fan regulators etc or modular cover plate with frame including sunken boxes suitable to fix modular cover plate with frame, concealed in wall and 4 sq mm multi stranded copper conductor FRLS cable as continuous earth wire drawn with wiring and connected to common earth dolly complete all as specified and directed for one power point controlled by one switch. Make of wire: Polycab/Plaza/Havells Note: Blanking plate,Modular cover plate ,Switches, sockets outlets, shall be measured and paid for separetely).

Supply and Fix modular switch 1 way 16 Amp.1 module, complete all as specified and directed. Make :Legrand/ Crabtree/ Anchor /Indoasian

Supply and Fix modular Socket, 16A - 3/5 pin combined 2 module, complete all as specified and directed. Make : Legrand/ Crabtree/ Anchor/Indoasian

Sub main wiring with Two runs of single core PVC FRLS insulated cable with copper conductor multistranded 1100 volts grade 6.0 sqmm through and including with suitable size of PVC conduit and its accessories , surface/ ceiling along with fixing arrangement etc including one run of 6.0 sqmm PVC insulated multistranded copper earth contuinuity conductor and connected to common earth dolly Complete all as specified and directed.

S&F factory made powder coated distribution board VTPN, 12 way double door MCCB DB including bus bar, Neutral bar, standard DIN rail, earth bar complete all as specified and directed. Make : Indoasian/Havells/ Legrand.

S&F distribution board MCCB four pole, 160 Amp ultimate breaking capacity 16 KA conforming to IEC -61439-1, complete all as specified and directed. Make : Legrand/ Havells/ Indo Asian

S&F Metal clad socket Single pole and earth encolsure with a three pin and earth plug with socket complete with one SP MCB 10 KA 20 Amps and 240 volts MCB Complete all as specified and directed Make -L&T /Legrand /Indo Asian

Supply and fixing 20 mm dia Chlorinated PVC (CPVC) Pipes of pressure rating 10kgf/cm2 including fittings like socket / union / Tee / Reducer / Nipple etc complete fixed to wall/ceilings/ in floors etc, complete all as specified and directed.

Supply and fixing PVC connection for hot/ cold water made of double layer nylon braided and fabric at a pressure of 6kg/sq cm at both ends, 300 mm long, heavy duty with CP brass adopters, washers, suitable for 15 mm bore pipe complete all as specified and as directed.

Supply and install water heater storage type (Geyser) vertical of capacity 15 Ltr, suitable for high pressure up to 8 bar powder coated metal body, temperature indicating dial , glass line coated tank, magnesium anode, efficient long life copper heating element, wattage 1.5 KW electrically operated, AC 230 Volt, BEE 5 Star Rated with complete fittings/parts and accessories for fixing on wall/surface all as per site requirement and specified and directed Make:- Bajaj / Racold / Havells

M&L for sub main wiring with PVC insulated unsheathed FRLS cable 1100 volts grade multi stranded copper conductor cable 2 runs of 4 Sqmm drawn through in and incl suitable size PVC Conduit and all accessories fixed to wall/floors along with 4 Sqmm surface PVC insulated unsheathed copper conductor multi stranded cable 1100V grade as earth continuity conductor and connected to common earth dolly complete all as specified and directed. Note: (a) 2 runs of 4 Sqmm cable along with one run of 4 Sqmm cable for earth conductor and PVC conduit shall be measured as one length Make:- Havells/ Polycab/ Plaza.

Supply and fixing 415V 10KA 'C' curve, 40-63 Amp TP miniature circuit breaker (MCB) in the DB complete with connection testing and commissioning complete all as specified and directed .Make -L&T /Legrand/ Indoasian

Taking down aluminium/copper point wiring on & including hard wood battens, surface conduit and board/ blocks etc or through conduits for light, socket or power point, fan point complete and making good the disturbed plaster surfaces of wall, floor, ceiling and painting 2 coat of white wash/distamber to match the existing surface, complete all as specified and directed.

M & L for Point wiring with PVC insulated FRLS 1.5 sq mm multi stranded copper conductor cable 1100 Volts grade drawn into and including rigid non metalic PVC conduit/casing caping medium grade not less than 19/20 mm ( ISI marked ) with all fitting and fixing accessories including sunk in pressed steel chromium plated terminal boxes, concealed in wall/surface/roofs/floor/ceiling etc as per site requirement and making & matching the existing surface ) white bakelite sheet cover for mounting switches, Sockets, Fan regulators etc or modular cover plate with frame including sunken boxes suitable to fix modular cover plate with frame, concealed in wall and 1.5 sq mm multi stranded copper conductor FRLS cable as continuous earth wire drawn with wiring and connected to common earth dolly for one light point controlled by one way 5/6 Amp switch complete all as specified and directed. Make of wire: Polycab/Plaza/Havells Note: Blanking plate,Modular cover plate ,Switches, sockets outlets, Light fittngs, fans, bells & regulators shall be measured and paid for separetely).

All as per item No 190 but for One Exhaust fan point controlled by one way 5/6 Amp switch complete all as specified and directed.

All as per item No. 190 here -in - before but for One 2/3 pin switch socket outlet point controlled by 6 Amps switch on Independent board.

All as per item No. 190 here -in - before but for One 3 pin switch socket outlet combination, 15 Amps, with cables 4 sq mm all as specified and directed.

Supply and Fix modular switch 1 way 6 Amp.1 module, complete all as specified and directed.Make : Legrand/ Crabtree/ Anchor/Indoasian

Supply and Fix modular Socket, 6A - 2/3 pin combined 2 module, complete all as specified and directed.Make : Legrand/ Crabtree/ Anchor/Indoasian

Supply & fix ceiling rose, surface bakelite type,PVC, 65 x 50 mm isolated body with three terminals all as specified and as directed.

Supply and fixing Exhaust fan 300 mm sweep 230/ 240 volt AC single phase PVC body 1400 RPM including necessary nut, bolts / screws including writing MES No with synthetic enamel paint all as specified and directed. Make-Havells /Bajaj/ Crompton Greaves

Supply and Fixing in repairs of 4 feet surface mounted batten type luminaire , lumen output of 2000 lumens, high efficiency long life LED package in integral module with lumen efficacy of >100 lm/w, viewing angle not less than 120° to ensure better uniformity with an operating voltage range from 140V-270V. The luminaire shall have a white extrusion housing with a poly carbonate diffuser to provide uniform light and sleek design with width not more than 22 mm. The luminaire shall have a CRI >80, Color temperature 6500K, THD <10% and PF >0.95,SDCM<5, IP20, IK02, Operating Temperature: -10 TO + 45 DEG.C; Input Supply Voltage Range:140-270 V, Frequency :50-55 HZ. The luminaire shall have flicker content<5% and shall have high and low cut off with auto restart feature.Driver Safety requirement stds: IS 15885-2-13. The luminaire shall be EMI/ EMC compliant and shall have a internal surge protection of 4 KV. The luminaire shall have Class-1 Electrical insulation, Class-B serviceability . The luminaire and driver shall be BIS approved, complete all as specified and directed. Make : Philips/ Bajaj / CG/Havells.

Supply and Fixing in repairs of 2 feet surface mounted batten type luminaire , lumen output of 1000 lumens, high efficiency long life LED package in integral module with lumen efficacy of >100 lm/w, viewing angle not less than 120° to ensure better uniformity with an operating voltage range from 140V-270V. The luminaire shall have a white extrusion housing with a poly carbonate diffuser to provide uniform light and sleek design with width not more than 22 mm. The luminaire shall have a CRI >80, Color temperature 6500K, THD <10% and PF >0.95,SDCM<5, IP20, IK02, Operating Temperature: -10 TO + 45 DEG.C; Input Supply Voltage Range:140-270 V, Frequency :50-55 HZ. The luminaire shall have flicker content<5% and shall have high and low cut off with auto restart feature.Driver Safety requirement stds: IS 15885-2-13. The luminaire shall be EMI/ EMC compliant and shall have a internal surge protection of 4 KV. The luminaire shall have Class-1 Electrical insulation, Class-B serviceability . The luminaire and driver shall be BIS approved, complete all as specified and directed. Make : Philips/ Bajaj / CG/Havells.

S&F factory made powder coated distribution board VTPN, 6 way double door MCCB DB including bus bar, Neutral bar, standard DIN rail, earth bar complete all as specified and directed. Make : Indoasian/Havells/ Legrand.

S&F distribution board MCCB four pole, 125 Amp ultimate breaking capacity 16 KA conforming to IEC -61439-1, complete all as specified and directed. Make : Legrand/ Havells/ Indo Asian

M&L for sub main wiring with PVC insulated unsheathed FRLS cable 1100 volts grade multi stranded copper conductor cable 2 runs of 4 Sqmm drawn through in and incl suitable size surface PVC casing caping/ PVC Conduit and all accessories fixed to wall/floors along with 4 Sqmm surface PVC insulated unsheathed copper conductor multi stranded cable 1100V grade as earth continuity conductor and connected to common earth dolly including taking down existing sub main wiring of any size. Note: (a) 2 runs of 4 Sqmm cable along with one run of 4 Sqmm cable for earth conductor shall be measured as one length Make:- Havells/ Polycab/ Plaza.

S&F in replacement factory made powder coated distribution board SPN 8 way double door, including bus bar, Neutral bar, standard DIN rail, earth bar complete including taking down unserviceable DB conforming to IS: 8623, all as specified and directed. Make : Legrand/ L&T/ Indo Asian

S & F in repair MCB single pole 240 volts 6 to 32 Amps 'C' series 10 KA breaking capacity complete including taking down unserviceable fitting complete all as specified and as directed.Make : Legrand/ L&T/ Indo Asian.

Material and labour for Boring of holes under road, pavement, hard standings by trenchless technology using ultra sound technique and necessary machine including HDPE pipes upto 100 mm dia suitable for 0.4 Mpa working pressure, complete all as specified and directed.

Material and labour for 3 ½ core 70 Sqmm XLPE insulated heavy duty electric cable with aluminium multi stranded conductor 1100 volts grade served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall sheathed laying in trenches/cable ducts, fixed to wall/pole, complete all as specified and directed. Make:- Havells/ Polycab/ RPG Asian Note - Earthwork and bricks shall be measured and paid separately in respective items.

S&F Metal clad socket Triple pole and earth encolsure with a three pin and earth plug with socket complete with one triple pole 32-40 Amps and 415 volts MCB Complete all as specified and directed Make -L&T /Legrand /Indo Asian

S & F MCB in repair SPN 240 volts 32 Amps 'C' series 10 KA breaking capacity complete including taking down unserviceable fitting complete all as specified and as directed .Make : Legrand/ L&T/ Indo Asian.

M&L as in repair energy efficient street light luminaire LED type 36 watts,with light sensor, IP66 ,230volts, 50 Hz , in deepdrawn aluminium housing and cast aluminium pipe mounting attachment including suitable heavy duty electronic driver also driver should withstand 265 volts and complete accessories, pre-wired and connection complete with suitable size of stranded copper flexible conductor and one no of 10 KV External SPD fixing in cable junction box complete all as specified and as directed. Make - Philips /Baja/Havells/CG

Supply and fixing 230 V 10 KA 'C' curve, 40 Amp SP miniature circuit breaker (MCB) in the DB complete with connection testing and commissioning complete all as specified and directed .Make -L&T /Legrand/ Indoasian

Supply and fixing 230 V 10 KA 'C' curve, 6-32 Amp SP miniature circuit breaker (MCB) in the DB complete with connection testing and commissioning complete all as specified and directed .Make -L&T /Legrand/ Indoasian

Supply, installation, testing & commissioning of maintenance free chemical earthing system comprising of 17mm dia copper bonded rod 3 mtr long horizontally pre welded T-terminal rod with provision for connection size of 50 x 150mm long, 6mm thickness with equal space either side, with 12mm dia hole of 02 numbers each on either side of the terminal clamp with 250 microns (average) coating thickness, tested and certified by CPRI India alongwith 50 Kg earth energizer compound and 10 litres earth resistance reducing liquid. The earthing energizer compound and resistance reducing earthing liquid shall be tested as per IEC-62561-7 read with ASTM G57-06, CI 3.4 A by any NABL accredited lab. The above mentioned rod shall be installed in 4-6 inch bore, 12 feet depth with a distance of minimum 3 meters between each installation complete all as specified and directed.. Make : Model HTSP 317 of safeTrode or equivalent in Snaga/ Cubes 6 Global

The quoted rate shall also deemed to be included the following :- (i) Prior to installation of maintenance free chemical earthing, soil resistivity test to be carried out at the location where earthing work to be done in presence of Engr-in- Charge/JE (E/M),user and the report has to submit to Garrison Engineer with recommendation of manufacturer, if required additional interconnection of earthing (not more than 08 number of earthing) to achive earth result less then 1 Ohms. The arrangement done for soil resistivity testing and submission of report with recommendation deemed to be included in the quoted rate.

(ii) The description/ size/ qty of items mentioned in above are for indicating only however qty/ size may vary at site condition to maintain the earth resistance 1 ohm. The contractor shall quote rate by considering all factors.

(iii) Rate of earth energizer compound of 25 Kg of 02 bags and earth resistance reducing liquid 10 litre per cane for each pit deemed to be included in the quoted rate.

(iv) Resistivity of earth energizer compound and resistance reducing earthing liquid shall be certified by any NABL accredited lab carried out as per IEC-62561-7 read with ASTMG57-06, CI-3.4A and the certificate of same shall be submitted by the contractor along with the sample approval

(v) Earth enhancing material should not leach into the adjacent soil or underground water channels and its PH value should be in neutral range complete all as specified and as directed. It should solidify when mixed with water and set like concrete.

(vi) Copper strip of size 20 x 3 mm shall be fixed on proper post insulator at the instrument end (copper strip upto 7.5 RM shall be considered in unit quoted rate and extra will be measured and paid separately).

(vii) Testing of earth shall be carried out in presence of departmental and user representative and report shall be submitted to Garrison Engineer duly signed by all concerned.

(viii) Earth resistance tester will be provided by the contractor. Tester should be calibrated from authorised company/ lab.

(ix) Earthing shall be tested after completion of work by the contractor in presence of Engr-in-charge, user and proper record shall be maintained duly signed by all concerned. After testing if the desired earth resistance of less than 1 Ohm is not obtained, the earthing will be redone at no extra cost to Govt. till desired result is obtained.

(x) The contractor shall give a written guarantee of minimum three years for maintaining the earth resistance less than 1 Ohm after certified date of completion.

(xi) No further maintenance or periodic watering or recharge shall be required in earthing during its guarantee period of over 03 years in all type of soil including soft/ disintegrated or hard rock.

(xii) During the guarantee period, if earth resistance is not maintained less than 1 ohm the contractor has to redo or rectify at no extra cost to Govt till desired result is maintained.

(xiii) A security deposit of value equal to 2.5 % of the rate quoted for chemical earthing for each earthing shall be retained from payment due to the contractor from final bill for the guarantee period.

(xiv) The electrode shall carry manufacturer's name .

(xv) The connection clamp shall be permanentlly welded to the copper bounded rod to avoid any kind of connectivity loss,.The pre-welded copper bounded rod shall not need any additional clamp for termination.

(xvi) The acceptable earth resistance at earth busbar/ test point shall not be more than 0.1 ohm.

(xvii) Earth work such as auguring and making good the surrounding area shall carried out in any type of soil.

(xviii) The contractor shall submit CPRI India certified document for copper bounded rod to ensure genuineness of material.

(xix) Sign board of mild steel sheet 2 mm thick duly painted with two coats of synthetic enamel paint over a coat of red oxide Zinc chrome primer showing result of earthing shall be fixed near the earth pit after completion as directed by engr -in- charge.

Material and labour for Earth pit cover made of heavy duty poly plastic of high grade polypropylene tested and certified by any NABL accredited lab for load bearing capacity not less than 7.2 tonnes with top dia not less than 250mm, bottom dia not less than 330 mm and height not less than 260 mm for each electrode pit complete all as specified and directed. Make : Model SEPC 250 of SAFE TRODE/ Electrogrip Model/ EGTEK3LC of ISG Global

S&F in repair copper strip 20 x 3mm thick as earthing lead fixed to wall/roofs etc complete all as specified and directed. Note : - All Joints should be joined by Exothermic Welding or Brazing.

Note :- An amount of Rs 94,625.00 on account of credit schedule for schedule 'A' part II shall be deducted from the total amount of BOQ to arrive at the contract sum.

SREE BUILDERS (BID ID -3507356)

M/S SRI BALAJI ENTERPRISES (BID ID -3508163)

devan enterprises (BID ID -3507108)

Moulya Builders (BID ID -3510679)

Maruthi constructions (BID ID -3509032)

NORTH INDIA PEST CONTROL (BID ID -3511768)

UNIVERSAL ENGINEERING (BID ID -3510984)

RAMESH BABU CO (BID ID -3506678)

UNITED TECHNO PROJECTS PVT LTD (BID ID -3508834)