T.S.No.12/2025-26 of SE/GCC/Salem (GL)

Earth work excavation in all type of soil with an initial lead of 10 m and all lift etc., complete for foundation. In Hard gravelly soil

Earth work excavation in all type of soil with an initial lead of 10 m and all lift etc., complete for foundation In soft distengrated rock not requiring blasting

Earth work excavation in all type of soil with an initial lead of 10 m and all lift etc., complete for foundation In medium rock and dense medium rock not requiring blasting

Removing hard rock by wedging, chisselling and trimming to proper shape where blasting is prohibited with an initial lead of 10 m and all lift etc., complete for foundation.

PCC 1:3:6 using 20 mm metal for foundation without formwork including cost of cement, all materials , labour, lead, lift, curing ,consolidation using vibrators, hire charges for T&P etc complete.

PCC 1:2:4 using 12 to 20 mm Kerb Wall with form work including cost of cement, all materials , labour, lead, lift, curing , consolidation using vibrators, hire charges for T&P etc complete.

RCC 1:1.5:3 using 12 to 20 mm (machine crushed) metal with formwork including laying surface vibrator, finishing the road surface using power trowel to get smooth top finish including cost of all materials, labour lead, litf, etc., complete but excluding cost of steel reinforcement For Road work.

RCC 1:1.5:3 using 12 to 20 mm (machine crushed) metal with formwork including cost of all materials, labour lead, litf, curing, vibrator etc., complete but excluding cost of steel reinforcement For Culvert bottom slab

RCC 1:1.5:3 using 12 to 20 mm (machine crushed) metal with formwork including cost of all materials, labour lead, litf, curing, vibrator etc., complete.but excluding cost of steel reinforcement For Culvert wall

RCC 1:1.5:3 using 12 to 20 mm (machine crushed) metal with formwork including cost of all materials, labour lead, litf, curing, vibrator etc., complete but excluding cost of steel reinforcement For Culvert top slab

Providing expansion joint for road concrete as per specification in both direction using prevalid aspheltics pad 20 mm thick to full width and depth of 150mm thick plastering with CM 1:3, 20 mm thick including cost of cement, all materials, labour, curing, all leads, and lifts, etc., complete.as per standard specification.

Brick work in CM 1:5 using II class chamber burnt bricks for basement & superstructure including cost of all materials, all labour, lead, lift, curing, etc., complete.

Supplying of GI / MS angles of various sizes to be fixed in the cable duct to the required length including cost of all materials, labour,lead, lift, galvanisation, etc., complete.

R:C:C 1:1.5:3 using 12 to 20 mm metal for precast slab for cable duct with form work including cost of all materials,curing, labour, lead, lift etc. complete. as per standard specification as directed by the dept. Engineer at site but excluding cost of steel reinforcement

Supplying and fabricating and placing in position of MS/RTS steel reinforcement of SAIL or equivalent brand as approved by engineer at site for RCC works including labour for cutting, bending, tying and fixing in position as per specification including cost of all materials, lead, lift, labour, cost of binding wire etc.complete.

Transporting and fixing of RCC cover slab from curing tank to working spot including cost of labour, lead, lift etc., complete.

Plastering with CM 1:3,12 mm thick for muffing coping concrete including cost of cement, all materials , labour, lead, lift, curing ,consolidation using vibrators, hire charges for T&P etc complete.

Supplying and fixing at anodized aluminium door using 101.60x44.45x2.10 mm @1.608 kg/m box section for outer frame. 53.70x44.45x2.30 @ 1.238 kg/m door vertical and top 83.50x44.45x2.4mm box section for bottom panels with 9mm thick regular grade pre laminated particle board & top panel with 5.5mm thick clear glass including cost of alum. Clips rubber beedings alum. Fixtures such as tower bolt, pivot brass mortice lock handle,with hydralick Door closer etc. of approved quality including cost of all materials, labour, leads, lift etc. complete (1.00 m x 2.20m size single leaf)

Supplying and fixing in position aluminium partition partly glazed & partly paneled above 12mm thick both side prelaminated boards [ MDF exterior grade] and 5mm thick machine frosted float glass 9modi, saint gobine or Equivalent0 using aluminium box section of not less than 63x38.4x2mm x 1.174kg/m for vertical @ 955mm c/c approx and horizantals[4Nos] including cost of all materials, labour, lead, liftT&P etc. complete.

Supply and installation of Anutone (or) Euivalent Brand of Acoustical False Ceiling of subtex nubby, square edge, glass fibre core fully encapsulated ceiling tile of size 595 x 595 x 15mm having volume density 120 Kgs / m3, weight 1.8 / 2.4 / 3 kg / m2 which is suspended by using 0.3mm thick skelet trelis T15 metal grid system. Skelet trelis T15 metal grid system of 600 x 600mm module includes skelet WA15 W30 wall angle with unequal flanges of 15 / 19mm, length 3000mm, fixed along the perimeter of walls with the help of nylon sleeves and suitable fasteners at 300mm centers. Then suspend the skelet MT15 W36 MainT with flange width 15mm, height 32mm and length 3600mm, from the soffit slab with help of soffit cleat and wire rod with leveling spring clip at 1200mm centres. Skelet CT15 W12 CrossT with flange width 15mm, height 26mm and length 1200mm is interlocked into the pre-cut slots in the Main T15 at 600mm centers in the perpendicular direction to the Main T15. Finally, the skelet CT15W06 CrossT with flange width 15mm, height 26mm and length 600mm are interlocked into the precut slots in the CT15W12 CrossT in direction parallel to the Main T15 to result in 600 x 600mm module. The subtex nubby square edge of size 595 x 595 x 15mm shall be placed into the grid size of 600 x 600mm. Ensure arrow marks behind the tiles are oriented in one direction to achieve uniform shade. The systems to achieve noise reduction coefficient not less than 0.9 NRC, so as to have an neat appearance as directed by the department offices. The cost includes, cost of material, cost of labour, scaffolding, transportation, conveyance, etc. complying to standard specication.

Supplying and fixing the name/ designation stickers in doors identifying the rooms including cost of material, labour, etc., complete.

Supply and run of 4 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 4 sq.mm copper wire with painting of suitable colour

Supply and fixing of 24W ( 4000 K ) LED 2x2 square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting.

Supplying and installation of split Air Conditioner (3 phase - 2.0 TR Split Type AC Unit ) of approved make 5 Star Rated Inverter (Carrier / Voltas / O General/ Equivalent) with all accessories including stabilizer ( V guard) with reputed make including cost of all materials, leads, lift, fixing charges, etc., complete as per standared specification complete.

Supply and fixing of 32 Amps DP plug and socket in sheet enclosure with 32 A DP MCB in flush with wall with earth connection (For AC plug) [Legrand (MDS) / Hager (L&T) make]

Supplying and fixing of RCCB safe trip of appd LEGRAND or Equivalent , ISI make , 25 amps with suitable box including cost of all materials labour, lead, lift, etc., complete as per standard specification.

Supplying and laying 25 mm dia 10 kg PVC pipe of approved quality for AC unit water drain pipe including cost of all materials, lead, lift, labour charge, etc., complete.

Supplying and laying of 5/8" copper pipe (Extra beyond 3 metres supplied with AC unit) for connecting AC panel to AC out door unit including cost of all materials, lead, lift, labour charge, etc., complete.

GST for bidders within Tamil Nadu

GST for bidders outside Tamil Nadu (IGST)