Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹3.5 LAWARDED | AWARDED |
Tender Value
₹4.7 L
EMD Value
₹23,500
Closing Date
18 Mar 2025, 10:59 pmClosed
Directorate of Municipal Administration
SINKING OF BOREWELL AT WARD NO 6 AND ERRECTIONING COMMISSIONIMNG OF PUMP AND MOTOR AND LAYING PIPELINE IN HOSANAGARA TP LIMIT UNDER SCARCITY GRANT
DMA/2024-25/WS/WORK_INDENT35188
DMA/2024-25/WS/WORK_INDENT35188
Open
Water supply/sewage lines
Two Tender Document System(Two Cover)
DMA Town Panchayat Hosanagara
₹500
₹23,500
10 Mar 2025
10 Mar 2025
20 Mar 2025
17 Mar 2025
SINKING OF BOREWELL AT WARD NO 6 AND ERRECTIONING COMMISSIONIMNG OF PUMP AND MOTOR AND LAYING PIPELINE IN HOSANAGARA TP LIMIT UNDER SCARCITY GRANT
Geophysical investigation at site for sinking borewells for Providingdrinking water to the habitation either through the Hand Pump MWSor P.W.S.S, by vertical electrical sounding by adopting Venner orS...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig (SR 2023-24 vol-v Sr page no 140 and item no12.1.1)Borewell depth of 0 to 50 Mtrs m
of capacity 300 PSIG & above 1100 CMF & above...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig (SR 2023-24 vol-v Sr page no 140 and item no12.1.1)Borewell depth of 0 to 50 Mtrs m
of capacity 300 PSIG & above 1100 CMF & above...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig (SR 2023-24 vol-v Sr page no 140 and item no12.1.1)Borewell depth of 0 to 50 Mtrs m of capacity 300 PSIG & above 1100 CMF & above ...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig (SR 2023-24 vol-v Sr page no 140 and item no12.1.1)Borewell depth of 0 to 50 Mtrs m
of capacity 300 PSIG & above 1100 CMF & above...
Supply of ISI mark 175mm nominal bore,plain and steel casing pipe
grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and
latest ammendments, electrical resistance welded steel tubes, m...
Providing and laying at site of work MS casing caps as per IS 1239 (part-
II) 1982 with all latest amendments if any for any dia. The thickness
of plate used for covering one end shall be 3mm (minimum...
Providing Submersible Pump Set of 150mm dia suitable for bore well and
confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt
Motor as per specifications, to work site as per necessary am...
Supply, installing,testing and commissioning COMMON control panel
consisting of the following INCOMING:1 No set of Phase indicating
lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog
Supply and delivery laying at site 50mm(2”) dia heavy duty unplasticized PVC
Column pipes with heavy duty collars,rubber profile ring,vibration
control profile ring,freezing and turbulence free leak...
Supply and delivery ,laying at site Brand new best make PVC insulated cable of
Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990
with ISI Mark and as per its latest amendments...
Supply and delivery fixing at site of brand new best make non-return valve as
per IS 778/1984 with ISI Mark and as per its latest amendments sze 50mm(pwd common sr vol v page no 153 and item no 13.25...
Providing and fixing normal gauge polythene pipes of approved quality
with special flange compression type fittings of approved make including
trench excavation and refilling etc. for EXTERNAL WORKS w...
Earth work excavation by manual means for drains, canals, waste weir, draft,
approach channels, key trenches, foundation of Buildings & bridges and such
simillar works in all kinds of soils, as per dr...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of
foundations and other similar works etc. in layers not exceeding 20cm in depth,
consolidating each deposited layer by r...
PVC bends and specials etc complet the work including labour charges
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .