Certain B/R repair and allied works to electric supply installation and other areas and Repair/Maint of internal lights and other E/M items at electric supply installation under GE (Utilities) Udhampur

Amount

Demolition of brick work or stone /boulder masonry, built in cement mortar, including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles etc, complete all as specified and directed by Engr-in-charge.

Demolition of cement concrete (unreinforced) in ground floor and in pavings not exceeding 15 cm thickness (below or above ground level), complete all as specified and directed by Engr-in-charge.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided, complete all as specified and directed by Engr-in-charge.

Brick work with sub class 'B' bricks straight or curved on plan, exceeding 6 m mean radius with old size bricks, built in cement mortar 1:6, complete all as specified and directed by Engr-in-charge.

All as per item No 04 here-in-before but except bricks, complete all as specified and directed by Engr-in-charge. Note : Old bricks obtained against demolition shall be used.

Walling of random rubble stone masonry uncoursed with best quality lacally available harder stones such as granite, trap, basalt stone etc, wellbonded bedded and solidly hearted, built in cement mortar 1:6, complete all as specified and directed by Engr-in-charge.

All as per item No 06 here-in-before but except stones, complete all as specified and directed by Engr-in-charge. Note : Old stones obtained against demolition shall be used.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed by Engr-in-charge.

Rolled mild steel work as in roof trusses(framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing(Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to grade Fe-410 W(Gde-E-50) quality-A, steel work duly painted with one shop coat of zinc chromate primer incl preparation of surfaces complete all as specified and directed by Engr-in-charge.

Rolled mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment conforming to grade Fe.290.Gde-E-165, steel work duly painted with one shop coat of zinc chromate primer including preparation of surfaces complete all as specified and directed by Engr-in-charge.

Welded steel wire fabric supplied and fixed to wood or steel members weight not exc. 4 kg per square metre, complete all as specified and directed by Engr-in-charge.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed by Engr-in-Charge.

M&L prepainted galvalume aluminium zink coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

M&L prepainted galvalume aluminium zink coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

Taking down chowkats or frames including shutters (without taking off shutters from the frames) not exceeding 1.50 Sqm each, and removing from site, complete all as specified and directed by Engr-in-charge.

Taking down chowkats or frames including shutters (without taking off shutters from the frames) exceeding 1.50 Sqm but not exceeding 4 Sqm each, and removing from site, complete all as specified and directed by Engr-in-charge.

Taking down shutters of any description exceeding 1.00 Sqm and not exceeding 2.00 Sqm each, and removing from site, complete all as specified and directed by Engr-in-charge.

Taking down and refixing shutters of any description exc 1.00 Sqm and n.exc 2.00 Sqm each in same opening, complete all as specified and directed by Engr-in-charge.

S&F 2nd class hard wood (sal/hollock), glazed and skelton shutters 35mm thick open rebated and prepared to receive glass, gauge,etc. (without sash bars), edges of framing palin, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Pt-I Section 8.24(a) supplied and fitted to chowkhats complete including fixing only iron mongery such as tower bolt,handle,hinges,aldrop bolt etc, complete all as specified and directed by Engr-in-charge.

S&F factory made, 2nd class hard wood (sal/hollock), plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the side of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, 35 mm thick complete including fixing only iron mongery such as tower bolt,handle,hinges,aldrop bolt etc complete all as specified and directed by Engr-in-charge.

S&F flush shutters, solid core construction, with block board core and plywood face panels, comercial type on both sides, 40mm thick complete including fixing only iron mongery such as tower bolt,handle,hinges,aldrop bolt etc complete all as specified and directed by Engr-in-charge.

Taking down steel windows including frames and shutters not exceeding 1.50 sqm each and removing to store, complete all as specified and directed by Engr-in-charge.

Taking down steel windows including frames and shutters not exceeding 1.50 sqm but n.exc 4.00 sqm each and removing to store, complete all as specified and directed by Engr-in-charge.

S&F steel window (box type) factory made with sidehung shutter including pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded including one shop coat of red oxide primercomplete all as specified and directed by Engr-in-charge.. Note : i) The window shall be fabricated as per Drg No CEUZ/TD/1269/2008 Sheet 1/3 to 3/3 . ii) MS fillets, glazing wire gauge shall be measured and paid seprately.

Description all as per item as above here in before but without glazing bar complete all as specified and directed by Engr-in-charge. Note : i) The window shall be fabricated as per Drg No CEUZ/TD/1269/2008 sheet 1/3 to 3/3. ii) MS fillets, glazing, wire gauge shall be measured and paid seprately.

Mild steel framed work such as grills, gratings with ends of bars shouldered or reveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar works, conforming to Fe-290, Gde E-165, complete all as specified and directed by Engr-in-Charge.

S&F aluminum handles cast type, anodised, 150 mm size complete all as specified and directed by Engr-in-charge.

S&F aluminum anodised barrel tower bolts of extruded section with 150 mm long bolt complete all as specified and directed by Engr-in-charge.

S&F in repair mild steel cold rolled butt hinges medium weight 100 mm long, including fixing and welding to pressed steel/wooden door frame if required complete all as specified and directed by Engr-in-charge.

S&F100mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, complete all as specified and directed by Engr-in-charge.

S&F of 200 mm long mild steel barrel tower bolts, stove enameled black, with bright bolt complete all as specified and directed by Engr-in-charge.

S&F in repair 200 mm long mild steel barrel tower bolts, stove enameled black, with bright bolt complete all as specified and directed by Engr-in-charge.

S&F of mild steel sliding door bolt plate type 250 mm long stove enameled black with bright bolt not less 12 mm dia bolt with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete all as specified and directed by Engr-in-charge.

S&F in repair mild steel sliding door bolt plate type 250 mm long stove enameled black with bright bolt not less 12 mm dia bolt with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete all as specified and directed by Engr-in-charge.

S&F of mild steel sliding door bolt plate type 300 mm long stove enameled black with bright bolt not less 12 mm dia bolt with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate,complete all as specified and directed by Engr-in-charge.

S&F in repair mild steel sliding door bolt plate type 300 mm long stove enameled black with bright bolt not less 12 mm dia bolt with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete all as specified and directed by Engr-in-charge.

Preparation of new wooden surfaces of any description not otherwise described, exc 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed by Engr-in-charge.

Pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer and tarring back side of frame, complete all as specified and directed by Engr-in-charge.

Pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer and taring back side of frame, complete all as specified and directed by Engr-in-charge.

M&L for providing cement concrete 1:3:6 type C-0 using 12.5mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast complete all as specified and directed by Engr-in-charge.

S&F of stainless steel wire clothcut to size, 0.36 mm nominal dia wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staple complete all as specified and directed by Engr-in-charge.

Dismantling floor, hearth or wall tiling including CM bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-charge.

S & F for Vitrified coloured ceramic tile 10mm thick double charged light shade (square / rectangular) polished, area of each tile exceeding 0.36 sqm over and including 15mm thick screed bed in Cement Mortar 1:6 in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed by Engr-in-charge.

M&L for Non skid coloured 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over 15mm thick screed bed in CM 1:6, complete all as specified and directed by Engr-in-Charge.complete all as specified and directed by Engr-in-Charge.

Ditto all as per item above but on skirting over vertical surfaces & including 10 mm thick cement mortar 1:4 screed, set and jointed with grey cement slurry and pointed in grout of matching shade of tiles complete all as specified and directed by Engr-in-charge.

Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over 15mm thick plaster in CM (1:4) jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing, granite cutting and mirror polish finish complete all as specified and as directed by Engr-in-Charge

M & L for kota stone slab flooring 20-25mm thick in riser of steps, skirting, dado & pillar over 10mm thick plaster in CM (1:3) jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing, granite cutting and mirror polish finish complete all as specified and as directed by Engr-in-Charge.

Glazed ceramic coloured tiles exceeding .075 sqm but not exceeding 0.15sqm as in vertical/Dado surfaces such as skirting dado etc set and jointed in neat cement slurry, jointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 to receive tiles, complete all as specified and directed by Engr-in-charge.

M&L for 100 mm thick cement concrete 1:2:4, type B2 (using 40mm graded agg) as in path etc finished even and smooth w/o using extra cement complete all as specified and directed by Engr-in-charge.

M & L for 75mm thick Plain Cement Concrete 1:3:6, type C-2 (using 20mm graded crushed stone aggregate), finished even and smooth without using extra cement as in plinth protrection complete all as specified and directed by Engr-in-charge.

Roughening surfaces of old concrete surfaces by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and directed by Engr-in-Charge.

Chequered cement concrete coloured tiles 30cmx30cmx25mm thick set over & including 20 mm thick screed in cement mortar (1:6) with neat cement and pointed in grey cement mixed with pigment to match the shade of tiles,complete all as specified and directed by Engr-in-charge.

Machine pressed precast concrete interlocking paver blocks any shape and size confirming to IS15658-2006 of 60 mm thick (M-35 Grade) with grey cement and no pigment, complete all as specified and directed by Engr-in-charge.

M&L for 100mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base of path/hardstanding,complete all as specified and directed by Engr-in-charge..

Fine sand filling under floor in layers not exceeding 25cm each layer including watering and well ramming, complete all as specified and directed by Engr-in-charge.

Taking down cement plaster including tiles of any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed by Engr-in-charge.

Rendering 15mm thick in cement mortar 1:4 on fair faces of bricks work/concrete surface finished the surface even and smooth (without using extra cement) with and including mixing of water proofing compound complete all as per manufacture's instructions and directed. (Note- WPC shall be measured and paid separately under relevent items).as on walls complete all as specified and directed by Engr-in-charge. Notes :- Plaster shall be carried out upto any height in patches and contractor shall have no claim for height and scaffolding what so ever is required to complete the work.

Rendering 15mm thick in cement mortar 1:6 on fair faces of bricks work/concrete surface finished the surface even and smooth(without using extra cement) as on walls, complete all as specified and directed by Engr-in-charge. Notes :- Plaster shall be carried out upto any height in patches and contractor shall have no claim for height and scaffolding what so ever is required to complete the work.

M&L for applying two coat of oil bond distemper on walls after preparation of newly plastered surfaces over a coat of white primer, complete all as specified and directed by Engr-in-charge.

M&L for applying two coats of cement base paint on walls after preparation of newly plastered surfaces over a coat of white primer, complete all as specified and directed by Engr-in-charge.

M & L two coat of cement base paint over a coat of alkali resistant priming paint over old plastered surfaces of wall including preparing surfaces after conplete removal of existing treatment upto 5-10 m height from ground level and at all locations as directed including , scaffolding, cleaning and curing etc, complete all as specified and directed by Engr-in-charge.

Preparation of old plastered/unplastered wall surfaces and applying one coat of oil bound distemper (including wahsing, rubbing down and stopping of distempered and painted surfaces),complete all as specified and directed by Engr-in-charge.

Preparation of old plastered/unplastered wall surfaces and applying one coat of white wash, complete all as specified and directed by Engr-in-charge.

Taking up or down steel tubing with connections for cleaning for refixing or removing to storeyard complete of bore 15mm complete all as specified and directed by Engr-in-charge.

M&L for steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 15 mm, complete all as specified and directed by Engr-in-charge.

Fixing only Steel water tubing 15mm dia medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors, complete all as specified and directed by Engr-in-charge.

S&F in repairs Rotational moulded polyethylene water storage tank 500 Ltrs capacity, ISI marked (cylindrical vertical with closed top), double wall layer construction, hoisted and fixed in position complete all as specified in SSR Part-I, making connections incl 20mm bore ball valve brass with polyethylene float and fly nut and tank nipples incl dismantling existing water tank of any capacity and removing from site,complete all as specified and directed by Engr-in-charge.

Supply and fixing in repair ball valves of size 15 mm bore dia high pressure of PTMT (Make-Prayag) with epoxy coated aluminium rod and high density plastic ball (Minimum weight not less than 210 gms) screwed for iron pipe and fixed including necessary fitting as reqd at site complete all as specified and directed by Engr-in-Charge

Supply and fixing in repair angle valves cast copper alloy 15 mm, screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions including necessary fitting as required at site complete all as specified and directed by Engr-in-Charge.

S&F in repair 15mm dia stop cock fancy type chromium plated, complete all as specified and directed by Engr-in-charge.

S & F Bib tap, cast copper alloy with crutch or butterfly handle, fancy type,Chromium plated screwed down, screwed for iron pipe, 15 mm bore (fixed in repair), complete all as specified and directed by Engr-in-charge.

S&F bib cock 15mm bore fancy type long body chromium plated in repair, complete all as specified and directed by Engr-in-charge.

Preparation of new steel surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed by Engr-in-charge.

M&L precast cement concrete jallies 25mm thick (measured solid set in cement mortar 1:4 incl all moulding and necessry form work, complete all as specified and directed by Engr-in-charge.

Precast reinforced cement concrete, (Nominal mix), Type B-1, 1:2:4 (using 20mm graded crushed stone aggregates) as in cover slab, manhole cover, shelves and similar articles with plain face, set and jointed in cement mortar 1:4, complete all as specified and directed by Engr-in-charge. (Note : Reinforcement shall be measured and paid separately)

TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for slabs,beam, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and directed by Engr-in-charge.

TMT bars 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for slabs,beam hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia,complete all as specified and directed by Engr-in-charge.

Hacking out old broken glasses (any thickness, size, quality or description) from wooden frames or steel frames, glazed with putty or fixed with wooden beads, complete all as specified and directed by Engr-in-charge.

4 mm thick sheet glass ordinary quality, and glazing with oil putty or wooden beads in squares n.exc 0.50 Sqm in each pane, complete all as specified and directed by Engr-in-charge.

10 litre capacity PVC, low level, valveless, syphonic action type flushing cistern, inlet ball valve, float valve, handle and fixing arrangement, 32 mm dia PVC flushing pipe and 15 mm dia 450 mm long PVC connection with PTMT waste coupling (fixed in repair), complete all as spfd, complete all as specified and directed by Engr-in-charge.

PVC connection suitable for 15 mm pipe with PTMT nuts and washers for both ends of length 450 mm long, (fixed in repair), complete all as specified and directed by Engr-in-charge.

Supply only integral water proofing compound as per latest IS specification, complete all as specified and directed by Engr-in-charge.

S&F in repir stainless steel grating doom 100/150mm dia with or without hole, complete all as specified and directed by Engr-in-charge.

S&F in repair vitreous China wash basin, white, flat back, size 550x400mm excluding tap, chain, plug but including for fixing of taps,waste fitting, brackets and cutting for and pinning in ends of brackets but fixed in repair, complete all as specified and directed by Engr-in-charge.

E/M Portion:- Taking down carefully alu./copper point wiring ,light fan socket, or power complete with fittings such as switches ceiling rose;holders; regulators, socket etc removing material to store for keeping in safe custody for reuse or disposal by credit and marking good to disturbed surfaces of walls floors etc , complete all as specified and directed by Engr-in-charge.

M & L for concealed point wiring with FRLS grade PVC insulated unsheathed multistranded copper conductor cables of 1.5 sqmm size alongwith one earth continuity conductor with PVC insulated unsheathed multistranded copper conductor cable of 1.5 sqmm size through and including PVC concealed conduit PVC BOARD WITH SUNKEN BOX for fixing of switches, sockets,light, fan regulators etc for the following, complete all as specified and directed by Engr-in-charge.

One light/fan/bell point or one fan point controlled by one switch

One 3/5 pin socket outlet, 5 Amp independent

One socket outlet 5 Pin, 5 Amps, SP on same board.

One socket outlet 6 pin 6/16 Amps, indipendent with cables 2.5 sqmm size .

S&F Piano type switch one way 6 Amps , 240 Volt, ISI marked complete all as specified and directed by Engr-in-charge.

S&F Switch Piano type single pole 15 Amps one way 240 Volt, ISI marked, complete all as specified and directed by Engr-in-charge.

S&F socket outlet 2 in 1,3/5 pin piano type 5 Amp flush type ISI marked complete all as specified and directed by Engr-in-charge.

S&F socket out let 5 /15 Amps 2 in 1 , 3 pin flush type complete all as specified and directed by Engr-in-charge.

S&F ceiling rose surface backlite 65 x 20mm size three terminal ISI marked complete all as specified and directed by Engr-in-charge.

S&F of electronic step type regulator of capacity 240 volts flush type ISI marked complete all as specified and directed by Engr-in-charge.

S&F in replacement LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete making all connection using 1.5 sqmm copper conductor multistrandard PVC insulated 2 core flexible cable with flexible PVC pipe from ceiling rose to fittings complete all as specified and directed by Engr-in-charge.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete making all connection using 1.5 sqmm copper conductor multistrandard PVC insulated 2 core flexible cable with flexible PVC pipe from ceiling rose to fittings complete all as specified and directed by Engr-in-charge.

S&F in replacement of sub main wiring with copper conductor cable (2 runs of cable) multistaranded 4.0 Sqmm PVC ISI marked with all insulated unsheathed in and including PVC concealed conduit 25 mm dia medium grade fittings including 4.0 Sqmm copper conductor cable PVC insulated unsheathed multithreaded using as continues earth wire connected to common earth and earth dolly complete all as specified and directed by Engr-in-charge.

S&F in replacement of sub main wiring with copper conductor cable (2 runs of cable) multistaranded 6.0 Sqmm PVC ISI marked with all insulated unsheathed in and including PVC concealed conduit 25mm dia medium grade fittings including 6.0 Sqmm copper conductor cable PVC insulated unsheathed multithreaded using as continues earth wire connected to common earth and earth dolly complete all as specified and directed by Engr-in-charge.

M&L for earthing in repair complete with galvanized steel earth electrode 60cmX60cmx6 mm thick buried directly in ground (earth pit not less than 2.25m deep below ground level ) with top edge of the plate not less than 1.5m below normal ground level connected to earth lead by means of bolts nuts and washers of GI steel and including earthing pit charcoal, common salt, GI 4.0mm dia lead wire 20mm GI medium grade watering pipe 15mm bore light grade protection pipe 5 Mtr length with wire mesh and funnel PCC pit in PCC 1:2:4 type B-1 using 20mm graded stone aggregate, angle iron frame and RCC cover and earth work complete all as shown in electrical plate No.3 of SSR -2009(Part-1).

S&F Sheet metal enclosure factory made for DBs single pole and neutral double door 240 volts 8 way with 200 Amps rated bus bar fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning and making good of wall, surfaces complete all as specified and directed by Engr-in-charge.

S&F Sheet metal enclosure factory made for DBs Triple pole and neutral single door 415 volts 4 way with one triple pole MCB 63A,suitable for MCCBs and fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing, and commissioning and making good of wall, surfaces complete all as specified and directed by Engr-in-charge.

S&F Sheet metal enclosure factory made for DBs single pole and neutral single door 240 volts 2 way complete all as specified and directed by Engr-in-charge.

S&F MCB TPN, 240 Volts , 10 Ka, 40 to 100 Amps, complete all as specified and directed by Engr-in-charge. Make:-Havells/Legrand/Schenider

S&F MCB single pole and neutral, 240 Volts , 50 Hz 10 KA, 40 to 63 Amps, 30mA complete all as specified and directed by Engr-in-charge.

S&F MCB single pole 240 Volts , 6 to 32 Amps complete all as specified and directed by Engr-in-charge.

Taking down ceiling fan sealing cable end etc and shifting to store complete and rehanging the same after overhauling and with white synthetic enamel paint(two coat) with the help of spray gun and connecting with three core flexible copper conductor cable 0.75 sq mm complete all as specified and directed by Engr-in-charge.

All as per sil item No 21 here in before but for exhaust/cabin fans of any size, complete all as specified and directed by Engr-in-charge.

S&F Plug top with indicator 16 amp , 3 pin, ISI Marked complete all as specified and directed by Engr-in-charge.

Checking,servicing, oiling and greasing of fan of any size/type by using appropriate grade of oil /grease and replacing defective parts such as bush, bearing, split pin, rubber bush, hanging clamp and capacitor etc including cleaning complete all as specified and directed by Engineer- in -Charge (Note|-Parts/components will be measured and paid seperately under their respective items)

Rewinding of celling fan 1200/1400mm sweep, AC, 230 volts single phase with super enamelled copper winding wire of appropriate size including packing, insulating material, soldering, varnishing, reassembling and testing as required, making functional, complete all as specified and directed by Engr-in-charge.

Nuts, bolts and washers of appropriate size for hanging of celling fan, complete all as specified and directed by Engr-in-charge.

Top / botton canopy of required size with tightening screws, complete all as specified and directed by Engr-in-charge.

Bearing of celling fans for 1200/1400mm sweep suitable for different makes /type of fans, complete all as specified and directed by Engr-in-charge.

Ball bearing suitable for exhaust fan 300 mm sweep of different make, complete all as specified and directed by Engr-in-charge.

Split pins of galvanished iron 1/8" dia, 2" length complete all as specified and directed by Engr-in-charge.

Rewinding of exhaust fan 300mm sweep AC 230 volts single phase with super enameled copper wire of appropriate size including packing insulating material, soldering, varnishing , reassembling , testing and making functional, complete all as specified and directed by Engr-in-charge.

Condenser/capacitor suitable for 230 volts singls phase celling fan 1200mm/1400 sweep of approved make and quilty of capacity 2.5 MFD, complete all as specified and directed by Engr-in-charge.

All as per Ser item No 115 here in before but for 3.15 MFD.

All as per ser item No 115 here in before but 4 MFD for Exhaust Fan

Supply & Fixing of Building Security LED light with fitting 30 Watt , 230 V, AC outdoor type with high pressure die cast aluminum hosing and heat resistant (in repair) complete with driver, lamp bracket with impact and corrosion resistant including GI braket for suitable size and thermal management in multiple optics with IP-66 protection, CCT 5700K, lumen efficacy not less than 110 lumen/watts complete all as specified and directed by Engr-in-Charge. Make-Bajaj Cat Part No. EXNT P 36L WH PO PC SD MT/Philips / Crompton or equivalent from the list of make given in particualr specification.

Supply and fixing Acrylic sheet molded letters ( CENTRAL POWER HOUSE GE(UTILITIES) ) of size 1' x 1' white in colour with good quality LED strip light with MES logo including constant current electronic driver and making connnection with suitable size copper conductor multistranded FRLS wire complete all as specified and directed by Engr-in-charge.

Supply and fixing Acrylic sheet molded letters ( MAIN POWER HOUSE GE(UTILITIES) ) of size 1' x 1' white in colour with good quality LED strip light with MES logo including constant current electronic driver and making connnection with suitable size copper conductor multistranded FRLS wire complete all as specified and directed by Engr-in-charge.

S&F in replacement LED light fitting 7/9/10 W Bulk head luminaires complete making all connection using 1.5 sqmm copper conductor multistrandard PVC insulated 2 core flexible cable with flexible PVC pipe from ceiling rose to fittings complete all as specified and directed by Engr-in-charge.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed by Engr-in-charge.

SODHI TRADING CORPORATION (BID ID -3304802)

RAMAN CONSTRUCTION CO (BID ID -3305225)