Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.9 LAccepted-AOC 475 OPP DAMAN GANGA COLONY GAYTRI MANDIR ROAD AMLI SILVASSA 396230 U T OF D NH | DADRA AND NAGAR HAVELI | THE DADRA AND NAGAR HAVELI AND DAMAN AND DIU | 396230 | L1 | Accepted-AOC L1 | |
| 2 | L2₹38.8 L+₹1.9 L (5.24%)Rejected-AOC DADRA AND NAGER HAVELI DN | DADRA AND NAGAR HAVELI | THE DADRA AND NAGAR HAVELI AND DAMAN AND DIU | 396193 | L2 | Rejected-AOC L2 | |
| 3 | L3₹40.4 L+₹3.5 L (9.49%)Rejected-AOC DADRA AND NAGER HAVELI DN | DADRA AND NAGAR HAVELI | THE DADRA AND NAGAR HAVELI AND DAMAN AND DIU | 396193 | L3 | Rejected-AOC L3 | |
| 4 | L4₹42.0 L+₹5.1 L (13.8%)Rejected-AOC DADRA AND NAGER HAVELI DN | DADRA AND NAGAR HAVELI | THE DADRA AND NAGAR HAVELI AND DAMAN AND DIU | 396193 | L4 | Rejected-AOC L4 | |
| 5 | L5₹42.1 L+₹5.2 L (14.1%)Rejected-AOC 203 REGENCY BUILDING RAVESHIA PARK MORARJI CIRCLE G I D C VAPI 396 195 DIST VALSAD GUJARAT | VALSAD | GUJARAT | 396195 | L5 | Rejected-AOC L5 |
Tender Value
₹37.1 L
EMD Value
₹74,300
Closing Date
17 Sept 2022, 12:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer-I(B),WD,PWD,DNH,Silvassa
PWD Campus Block No.I(B),DNH,Silvassa
Renovation of Van Bhavan Building at Pipariya.(2nd Call)
2022_UTDNH_6124_1
E-TENDER NOTICE NO.21 OF 2022-23 (BLDG)
Open Tender
Civil Works - Buildings
Item Rate
150 days
UT OF DNH
As per NIT refer
3 documents required · 3 mandatory
₹500
Executive Engineer-I(B),WD,PWD,DNH,Silvassa
₹74,300
21 Sept 2022
9 Sept 2022
17 Sept 2022
9 Sept 2022
17 Sept 2022
9 Sept 2022
Amount
Providing material and labour for masonary wirk using aerated light weight concrete block having crushing strenght not less thane 35kg/sqcm for super structure above plinth level up to floor two level in cement mortar 1:5 ( 1 cement : 5 fine sand ) complete as per technical spefication
Providing material and labour for 20mm thick sand faced cement plaster on walls upto height 10 metres above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete
Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half brick walls for interior plastering upto floor two level and finished even and smooth in (iii) Cement mortar 1:6 (1-cement:6-sand) for finishing with a floating coat of neat cement slurry.
Providing and fixing window having extruded aluminum Colour anodized section frame main outer size 95mm x 24mm x 1.17mm (of Jindal Section no:2459 @ wt.of 0.738 Kg/mt), horizontal Three track member size 92mm x 31.75mm x 1.30mm (of Jindal Section no:8688,@ Wt.1.07 Kg/mt), vertical member of size 92mm x 31.75mm x 1.50mm (of Jindal Section no:8933,@ Wt. 1.06 Kg/mt) with sliding shutters of horizontal member size 40 mmx18mm x1.29mm (of Jindal Section no:8947@ wt.of 0.456 Kg/mt), vertical member of size 40mm x 18mm x 1.29 mm (of Jindal Section no:8949 @ wt.of 0.456Kg/mt/ with 5 mm thick transparent bronze colour tinted float glass with powder coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as per details etc
Providing material and labour for fixing Powder coated Alluminium DOOR with pipe section 63.50mm x 38.10mm x 1.95 mm including glazing clips and 25mm x 25mm x 1.80 mm having cross section C/C not more than 0.7 x 1.00 meter and using Hardnersheet / Modi Glass 4mm thick fitting with rubber gasket and other fixture and fastening and Door closer etc. complete as directed by Engineer in charge.
Providing material and labour for fixing eco friendly light weight calcium silicate False ceilling tiles having Tegular edge & 15mm thick Densified edges on the tiles periphery for Extra Strength the light weight calcium silicate ceiling tiles shall have, light reflection 85% Non combustible as per B.S. 476 Part IV, 100% humidity resistance and also having thermal conductivity 0.043O w/m K.C. for the best thermal insulation. the light weight calcium silicate tiles shall be of approved texture fine fissured / spintone / cosmos having NRC value of 0.5 & Globe having NRC value of 0.75 NRC or equivalent of size 595 x 595 mm to be laid on true horizontal level suspended inter locking metal grid of hot dipped galvanized steel sections (galvanizing @ 120 grams per sqm including both side ) consisting of main 'T' runner suitably spaced at joints to get required length and size of 24 x 38mm made from 0.30 mm thick (minimum) sheet, 1200mm centre to centre, and cross 'T' of size 24 x 28mm made out of 0.33mm (Minimum) sheet spaced 1200mm along spaced between main 'T' at 600mm centre to centre to form agrid of 1200 x 600mm made of 0.30mm thick (Minimum) sheet to be interlocked at middle of the 1200 x 600mm panel to form grid of size.
Providing and laying Anti static PVC flooring having 2mm thick laying on hard surface with solution. The carpet having Abrasion resistance, Dimensional stability, Insulation resistance, Indentation, fire resistance, curling, less water absorption, Oil absorption, colur fastness, sound reduction factor, heat Ageing & Exudation and good flexibility etc. complete
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (including Door handle, lock and stopper etc.).
Providing and supplying Godrej BRAVO MID BACK. The seat and back should be made up of 1.2 + 0.1 cm thick hot pressed plywood and upholstered with fabric upholstery covers and moulded polyurethane foam. The back foam should be desined with contoured lumbar support for extra comfort. the seat has extra thick foam on front edge to give comfort popiteal area. BACK size 47.5 cm (W) x 69.5 cm (H). SEAT SIZE 47.0 cm (w) X 48.0 CM (D). the HR polyurethane foam should be moulded with density = 45+2 kg / m3 and hardness load 16+ 2 2 kg for 25% compression. the one piece armrests should be injection moulded from black Co-Polymer polyprophylene. The mechanism should be designed with the following features. 3600 revolving type. Upright - position locking . Tilt tension adjustment. seat / back tilting ratio of 1:3. the pneumatic height adjustment has an adjustment stroke of 12.0 + 0.3 cm. The below should be 3 pice telescopic type and injection moulded in black 33% glass filled Nylon - 66 and fitted with 5 Nos twin wheel castors. the pedestal should be 66.3 + 0.5 cm pitch center dia (76.3 + 1.0 cm with costors.). the twin wheel castors should be injection moulded in Black Nylon. OEM should be Green Guard and BIFMA certified. Approved make : Godrej / Herman Miller / Haworth / Knoll
Providing and placing Workstation Size:1200mm W X 600mm D x 52.4 mm 1200mm high panel in wash system with metal receway at bottom two internal fabric block top tie fabric tackable, white board fabric magnetic providing powder coated legs require pedestal 390x435x646 H KBPT and CPU trolly along with work station Approved Make :- Ultra Fab /Godrej / Herman Miller / Haworth / Knoll
Providing and supplying Cupboard,storewell Size : 910mm W x 486mm D x 1980 mm H with Welded Grinding less Construction. Completely made of High zinc coated Galvanized Steel 1.0 mm thickness prime export quality material with with test certificate from galvanized steel manufacturer as per IS 277 standard. hinges make olive or godrej , and lock Ultrafab Make, cupboard completely finished with epoxy powder coating with all raw materials and quality test certificate. Approved Make :Ultra Fab / Godrej / Herman Miller / Haworth / Knoll
Providing and fixing screw down bib taps of following size.(B) Brass chromium plated screws down Bib Tap. (i) 15mm dia.as per site eng.inch. /or eng./arch. approvals. ( Make Hindware/ Cera/ Parryware ) ( C.P. Fixture. Jaquar, Continental/ Essess/Hindware Make)
Providing and fixing pillar tap, capstan head, screw down high pressure with screws, shanks and back nuts. (i) 15mm dia.
Providing material and laour for fixing washbasin with single hole with pillar tap,stop tape with C.I. or M.S. brackets painted white including sutting holes and making good the same but excluding fittings.(A) Vitreous China:(ii) Flat Back washbasin 550 mm x v 400mm size. (i) In white colour. & Providing and fixing C.P. brass waste for washbasin or sink. (B) 40mm dia. & Providing and fixing M.I. fisher union for washbasin or sink. (B) 40mm dia.
Providing material and labour for fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete.[A] 15 mm dia.
Providing and fixing G.I. Chainlink fencing 50mm x 50mm sq.mt. of 8 gauge wire having weight @ 4.30 kg/m2 including fixing with M.S. flate 25mm x 5mm thick nut with bolts etc. complete.
Providing material and labour for Steel work, welded in built up sections framed work including cutting, hoisting, fixing in position and applying a priming coat of read lead paint. (A)In beams and joists, channels angles Tees, flats, with connecting plates or angle cleats as in main and cross beams. Hip and jack rafters, purlins conneted to common rafters and the like
Providing material and labour for Finishing wall with weather proof exterior emulsion paint(apex) on wall surface (two coats) to give an required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials.etc complete
Providing material and labour for Painting two coats (excluding priming coat) on previously painted steel and other metal surface with enamel paint, brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter.
Providing material and labour for Painting three coats (excluding priming coat) on new wood and wood based surface with enamel paint, interior to give an even shade including cleaning the surface of all dirt, dust and other foreign matter sand papering and stopping.
Providing material and labour for making BLACK GRANITE SHELVES & DOOR FRAME Having 16mm to 18mm thick (Locally available) stone over 10 mm thick cement plaster (1 cement :3 sand) jointed with cement slurry including making molding to edge of stone slab as directed by engineer in charge.
Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse sand : 6-crushed stone aggregates 20 mmnominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth
Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(B) Dense or Hard soil
Providing and laying cement concrete work 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone aggregates 20 mm nominal size) and curing complete excluding cost of formwork and reinforcement for reinforced concrete work in (A) Foundations, footings, Base or columns and Mass concrete
WATERPROOFING TREATMENT: Cleaning existing Terrace Surface, Providing and Laying Waterproofing Treatment in DOUBLE LAYER to Terrace with APP (Atactic Polypropylene Polymer) Modified Pre-Fabricated Five Layer Water Proofing Membrane, HYDROSTOP of TIKIDAN make, comprising of 1st Layer of 3mm Thick and Minimum 3.5 Kg./m2 Weight Membrane HYDROSTOP 3 FGP, Upper and Bottom Surface Finished in Plastic Polyethylene Film and having Reinforcement of Fibre Glass at Core and 2nd Layer of 3mm Thick and Minimum 3.5 Kg./m2 Weight Membrane HYDROSTOP 3 PYM, Upper Surface Finished in Minerals and Bottom Surface Finished in Plastic Polyethylene Film and having Reinforcement of Non-Woven Polyester Matt at Core, including a Coat of Bitumen Primer TIKI PRIME S for Bitumen Membranes Manufactured to IS:3384 . Over the dried Primer Coat, Laying APP Membrane HYDROSTOP in DOUBLE LAYER using Butane Torch, the 1st Layer Torch Bonded to the Primed Surface followed by Torch Bonding of 2nd Layer to the First, while maintaining the Side Overlaps 100mm and End Overlaps 150mm, Sealing all Overlaps etc. complete., including treatment at all Junctions and Corners to accomodate Stresses with 300mm Wide Strip of 3mm HYDROSTOP 3 PYP and treatment over the Vertical Plane up to 200mm height above the Finished Floor level with 3mm APP Membrane HYDROSTOP 3 PYM, the Waterproofing Membrane terminated by tucking it into the groove made on Vertical Plane, the groove sealed with Cement-Sand Mortar, etc., all complete.
Point wiring for Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC / Metallic box, single mounting base frame covered with textured / metallic front plate modules erected on / in wall / ceiling with following type accessories - Cat. I
Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size (a) with medium class Rigid PVC pipe and accessories (b) 2 wire 2.5 sq. mm
Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-1986 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) (H) Single phase 12 way SS Double door
Providing and erected Approved make Ceiling fan with double ball bearing ISI mark with condenser A.C. 230 V. 50 c/s 1200 mm sweep complete, canopy and 30cms. Down rod erected on existing hook or clamp with 24/0.2, 3 core flexible wire with earthing. [ Make shall be approved by Engineer in charge ]
Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA polyester powder coated and high U.V. & corrosion resistance with diffuser and/or Polycarbonate optics with company mark/name 120 to 300 V,Power Factor more than 0.9, THD < 10 %, CCT 4000 K to 6500K, Uniformity ratio >0.7, Luminaire efficiency> 85 lumens/watt , LED driver efficiency > 85 % CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux(U.S.A.) make LED used for luminaire. (Each fitting required LM-79 & LM-80 Certificates) (A) Tube Light with integral/ non-integral driver (d) 20-22 watts, Surge - 4KV, IP-20, 4 feet
Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA polyester powder coated and high U.V. & corrosion resistance with diffuser and/or Polycarbonate optics with company mark/name 120 to 300 V,Power Factor more than 0.9, THD < 10 %,CCT 4000 K to 6500K, Uniformity ratio >0.7, Luminaire efficiency> 85 lumens/watt , LED driver efficiency > 85 % CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux(U.S.A.) make LED used for luminaire. (Each fitting required LM-79 & LM-80 Certificates) (D) LED Panel Light with provision for Plane front frame with translucent cover fixed to housing complete. (f) upto 36 watt, 600 x 600 mm, surge - 4 KV
Dharmik construction
HIREN CONSTRUCTION
HITENDRA A PATEL
aklingji construction
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .