Periodical Services (Painting) and Ceiling repair of AW Section bldg. No. 57 and SAF Range inside SAF

Amount

Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water, etc. and rendering 15mm thick 1:4 cement plaster using cement slurry on fair faces of brick work. Cement make- ACC, Lafarge, KC or equivalent. Test Certificate of cement is required during sample approved by E-I-C. Specifications of material used should confirm to clause no. 4.3, 4.4 & their sub clauses of MES SSR 2009, Part-1.

Chipping off all loose mortar, concrete, plaster using suitable tools from ceiling , cleaning the substrate with wire brush then providing & applying one coat of Rearm Rust R or equivalent over exposed corroded reinforcement and allow for 15-30 minutes or as per manufacturer instructions, then wash with sufficient quantity of water to make the reinforcement free from rust, then applying two coats of FloARM Coat ZP a zinc rich epoxy primer or equivalent to protect reinforcement from further rusting allow it to dry as per manufacturer instructions then applying ReArm crete RM a polymer modified repairing mortar for providing cover to reinforcement, having compressive strength not less then 25mpa @28 days over a bond coat with ReArm Bond EBA epoxy bonding agent having compressive strength, flexural & tensile strength @28 days not less then 70, 50&30mpa respectively. The manufacturer of chemical must be an ISO 9001 &14001 certified. Work must be carried out by authorized applicator of manufacturer only. (Chemical manufacturer:- Myk ARment, Sika, Fosroc, Stanvac prime or equivalent). Firm must provide quality assurance certificate of material from manufacturer before use in work.

M&L for rendering 05mm thick 1:3 cement plaster using cement slurry on ceiling. Make: ACC, Lafarge, KC or equivalent. Test Certificate of cement is required during sample approved by E-I-C. Specifications of material used should confirm to clause no. 4.3, 4.4 & their sub clauses of MES SSR 2009, Part-1.

M&L for chalk whiting , on new plastered surfaces on walls, preparatory to distempering including preparation work as directed by EIC. All the work must be executed as per clause no. 15.12 sub clause no. 15.12.2, 15.12.3, 15.12.5 & other related conditions as per MES SSR Part-1-2009. Quality assurance certificate from manufacturer must be provide before execution of work.

M&L for chalk whiting , on new plastered surfaces on ceiling, preparatory to distempering including preparation work as approved by EIC. All the work must be executed as per clause no. 15.12 sub clause no. 15.12.2, 15.12.3, 15.12.5 & other related conditions as per MES SSR Part-1-2009. Quality assurance certificate from manufacturer must be provide before execution of work.

M&L for applying two coats of white wash on old decorated surfaces in ceiling mixed with blue & gum shade and material as approved by EIC. All the work must be executed as per clause no. 15.12 sub clause no. 15.12.2, 15.12.3, 15.12.5 & other related conditions as per MES SSR Part-1-2009. Quality assurance certificate from manufacturer must be provide before execution of work.

M&L for applying 02 two coats of distemper oil emulsion on walls, white or tinted, including preparing work etc on old surfaces of walls. Complete , shade and material as approved by EIC before use in work. All the work must be executed as per clause no. 15.14 sub clause no. 15.14.2.2, 15.14.5 & other related conditions as per MES SSR Part-1-2009. Quality assurance certificate from manufacturer must be provide before execution of work. Make: Asian, Berger, Nerolac, Indigo or equivalent.

M&L for applying 02 two coats of synthetic enamel paint over old painted plastered surfaces of any description over 10cm girth or width, not otherwise described including preparation of old painted surfaces. All the work must be executed as per clause no. 17.9 &17.10 sub clause no. 17.09.4, 17.9.6, 17.9.7, 17.10.1, 17.10.2 & other related conditions as per MES SSR Part-1-2009. Quality assurance certificate from manufacturer must be provide before execution of work. Make: Asian, Berger, Nerolac, Indigo or equivalent.

M&L for applying 02 two coats of synthetic enamel paint over wood or wood based surfaces of any description over 10cm girth or width, not otherwise described including preparation of old painted surfaces. All the work must be executed as per clause no. 17.6 &17.10 sub clause no. 17.6.4, 17.6.5, 17.10.1, 17.10.2 & other related conditions as per MES SSR Part-1-2009. Quality assurance certificate from manufacturer must be provide before execution of work. Make: Asian, Berger, Nerolac, Indigo or equivalent.

M&L for applying 02 two coats of synthetic enamel paint over steel and iron surfaces of any description over 10cm girth or width, not otherwise described including preparation of old painted surfaces. All the work must be executed as per clause no. 17.8 &17.10 sub clause no. 17.8.5, 17.8.6, 17.10.1, 17.10.2 & other related conditions as per MES SSR Part-1-2009. Quality assurance certificate from manufacturer must be provide before execution of work. Make: Asian, Berger, Nerolac, Indigo or equivalent.

M&L for applying 02 two coats of cement paint on walls, white or tinted, including preparing work etc. on old surfaces of walls. Complete, shade and material as approved by EIC before use in work. The surface should be well cured before painting and curing will be done after painting for minimum 02 days. All the work must be executed as per clause no. 15.12 & 15.15 sub clause no. 15.12.2, 15.12.3, 15.15.1 to 12 & other related conditions as per MES SSR Part-1-2009. Quality assurance certificate from manufacturer must be provide before execution of work. Make: Asian, Berger, Nerolac, Indigo or equivalent.

M&L for applying 02 two coats of synthetic enamel paint on old painted surfaces of any description , n.exc10cm in width or girth when unconnected with other painting or when painted in a different tint including preparation work. All the work must be executed as per clause no. 17.8 &17.10 sub clause no. 17.8.5, 17.8.6, 17.10.1, 17.10.2 & other related conditions as per MES SSR Part-1-2009. Quality assurance certificate from manufacturer must be provide before execution of work. Make: Asian, Berger, Nerolac, Indigo or equivalent.

M&L for applying 02 two coats of Aluminum Paint on old painted surfaces of any description, n.exc10cm in width or girth when unconnected with other painting or when painted in a different tint including preparation work. All the work must be executed as per clause no. 17.8 &17.10 sub clause no. 17.8.5, 17.8.6, 17.10.1, 17.10.2 & other related conditions as per MES SSR Part-1-2009. Quality assurance certificate from manufacturer must be provide before execution of work. Make: Asian, Berger, Nerolac, Indigo or equivalent.

Taking down rainwater pipes (any size or pattern), with all fittings, heads, shoes, bends etc. including cleaning and refixing complete using 1:3 cement mortar to avoid leaking/seepage issue from pipes, all as specified and directed by Engineer In Charge.

INDUSTRIAL SOLUTION (BID ID -754400)

B.S. CONSTRUCTIONS (BID ID -751977)