Addition/ Alteration including repairs to Md Accn Block No. P-1, P-2, P-3, P-4 and P-5 of old Hoshiyar Enclave at Bikaner Military Station.

Amount

Demolition of cement concrete (unreinforced) in ground floor and pavings not exc 15 cm thick (below or above ground level) including floor tiles of any description complete all as specified & as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for in this Schedule complete all as specified & as directed.

Demolition of reinforced cement concrete of any description and in any position (reinforcement cut as required to facilitate demolition) not otherwise specifically provided for in this Schedule, complete all as specified & as directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

Taking down cement plaster or cement lime plaster, terrazo etc on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc, complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified and as directed.

Removing building materials etc. to a distance of 4 to 5 Km upto the dumping ground and/or outside to defence land as decided by the GE, beyond the lead included in the quoted rates of respective items as per SSR, including loading, unloading and stacking at the destination complete all as specified & as directed. Note : The quantity ‘Per Load’ shall be calculated as per SSR Part-II.

Dismantling boarding, any description, fixed in any position with nails, complete all as specified & as directed.

Dismantling of cast iron, wrought iron or mild steel work of any description and from any position not otherwise provided for in this Schedule (BOQ), including grills, guard bars, shutters, etc, complete all as specified and as directed.

Taking down old unserviceable cooler stand of any size & any type fixed at cill level of windows at Ground Floor & First Floor of building on external face of wall and making good the disturbed portion in cement mortar 1:4 and/or PCC 1:2:4 type B0 using 12.5mm graded crushed stone aggregate as required complete all as specified & as directed.

Taking down old unserviceable meter box of any size & description fixed at any position in wall etc at Ground Floor & First Floor of building and making good the disturbed portion in cement mortar 1:4 and/or PCC 1:2:4 type B0 using 12.5mm graded crushed stone aggregate as required complete all as specified & as directed.

Taking down shutters (including fittings & fixtures) of any description exc 1 Sqm and not exc. 2 Sqm each, complete all as specified and as directed.

Taking down chowkat or frame with shutters (including fittings & fixtures) area not exc 1.5 Sqm each (without taking off the shutters from the frame) and making good disturbed portion in cement mortar 1:4 and/or PCC 1:2:4 type B0 using 12.5mm graded crushed stone aggregate as required complete all as specified and as directed.

Taking down chowkat or frame with shutters (including fittings & fixtures) area exc 1.5 Sqm but not exc 4 Sqm each (without taking off the shutters from the frame) and making good disturbed portion in cement mortar 1:4 and/or PCC 1:2:4 type B0 using 12.5mm graded crushed stone aggregate as required complete all as specified and as directed.

Site Clearance in soft/loose soil complete all as specified & as directed.

Excavating in trenches, not exc 1.5 metre wide and not exc 1.5 metre in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. laying cables, pipes, etc. not exc 10 Sqm on plan & not exc 1.5m in depth and getting out in soft/loose soil complete all as specified and as directed.

Returning, filling in, including spreading, leveling watering and well ramming in layers not exc 25 cm thick in soft/loose soil complete all as specified and as directed.

Removing excavated soil/material to a distance not exc 50 metre and depositing where directed at a level not exc 1.50 metre above the starting point complete all as specified and as directed.

M&L for anti termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified & as directed.

M&L for anti termite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified & as directed.

M&L for PCC 1:4:8 type D2 using 40 mm graded crushed brick aggregate as in Sunken portion, surroundings of WC seats and similar works, complete all as specified & as directed.

M&L for PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed.

M&L for cement concrete (1:2:4) type B1 using 20 mm graded crushed stone aggregate as in surface channels and drains and benching including finishing the top of benching even and smooth using extra cement complete all as specified and as directed.

M&L for PCC 1:3:6 type C0 (using 12.5mm graded crushed stone aggregate) as in filling up chowkat/frame hollows and similar works complete all as specified and as directed.

M&L for cement concrete 1:2:4 type B1 using 20mm graded crushed stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, roof kerbs or mud stops, water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed including use and waste of form work (straight or curved) all exposed surface of concrete finished fair complete all as specified & as directed.

M&L for precast cement concrete (1:2:4 type B0 using 12.5mm graded crushed stone aggregate) louvers and jallies, 80mm thick (measured solid), including all mouldings but excluding frame, set in CM 1:4 complete all as specified & as directed.

M&L for reinforced cement concrete M-25 grade (Design mix) using 20mm graded crushed stone aggregate in slabs supported on walls, beams and columns in floors, roofs, shelves and the like complete all as specified & as directed. Note :- Reinforcement & formwork shall be measured and paid for separately.

Supply only integral liquid water proofing compound (ISI marked) complete all as specified & as directed.

M&L for cutting holes in brick walls built in cement mortar or cement lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or PCC 1:2:4 type B1 using 20mm graded crushed stone aggregate as required, exc half brick & not exc one brick (Depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall) complete all as specified & as directed.

M&L for cutting holes into or through brick walls built in cement mortar or cement lime mortar and making good in cement mortar 1:3 or PCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as required for superficial area exc 400 sqcm but not exc 0.10 sqm complete all as specified & as directed.

M&L for forming jambs, etc., to openings including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, new work built in cement mortar 1:4, complete all as specified & as directed.

M&L for brick work with old size Fly Ash bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:6 complete all as specified and as directed.

M&L for brick work with old size burnt clay sub-class ‘B’ bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:4 complete all as specified and as directed. Note : Brick work under this item shall be carried out in sewage disposal work (i.e. manholes).

M&L for brick work with old size Fly Ash bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed.

M&L for 5 cm thick sand stone slabs in sun-shades, chajjas, shelves, cills, landings, cover stones, templates, etc. not exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in cement mortar 1:4, complete all as specified and as directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exc 200mm thick (Horizontal or sloping) for rough finished flat surfaces of concrete complete all as specified & as directed.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs, shelves and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 5cm but not exc 10cm wide for rough finished surfaces of concrete complete all as specified & as directed.

M&L for 2nd class soft wood (Kail) in scantlings, clean sawn, timber framed and fixed, complete all as specified and as directed.

Taking down shutter of any description exc 1 Sqm and not exc 2 Sqm each and refixing in same opening including easing and adjusting of shutter as required including renewal of unserviceable screws complete all as specified & as directed.

Supply and fixing factory made 35 mm thick plain framed, paneled shutter (Two panels) with lock rail and panel of 9mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces, size of rail and styles as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated using second class Hard Wood rail and styles, fixed to chowkat, complete all as specified & as directed.

Supply and fixing factory made 35mm thick glazed and skeleton shutters made of second class hard wood, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in clause 8.24(a) of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkat, complete all as specified & as directed.

Supply and fixing Fiber Glass Reinforced Plastic (FRP) Door Frames of required colour (as approved by GE) of cross section 90mm x 45mm having single rebate of 32mm x 15mm to receive shutter of 30mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable seasoned and treated second class hardwood wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame, complete as specified by the manufacturer and as per directions of Engineer-in-charge, complete all as specified & as directed.

Supply and fixing 30mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour (as approved by GE) and approved brand and manufacturer, made with fire-retardant grade unsaturated polyester resin, moulded to 3mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned and treated second class hardwood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP laminate for panels conforming to IS:14856, including fixing to frames, complete as specified by the manufacturer and as per directions of Engineer- in-charge, complete all as specified & as directed.

S&F rubber gasket of 2.5mm thickness (minimum) and width 60mm, fixed with steel screws or black nails with plate washers to wooden doors to cover the gap between door and floor complete all as specified & as directed.

M&L for 18mm thick Medium Density Fibre board, exterior grade, ISI marked, veneered with decorative face veneers one face, fixed to timber framework with screws, as in cupboard shutters, shelves, Kitchen cabinets, drawers and similar works, complete all as specified & as directed.

S&F 20 mm wide second class hard wood decorative moulding / beading, machine made with some pattern (as approved by GE), fancy type, fixed with nails/adhesive as required complete all as specified & as directed.

S&F continuous (piano) hinges, mild steel, bright finish or electro galvanized width of flaps 30mm (when open) fixed with CP steel screws complete all as specified and as directed.

S&F butt hinges of size 100mm medium weight, cold rolled mild steel (ISI marked) complete all as specified and as directed.

S&F butt hinges of size 75mm, extruded brass, with mild steel hinge pin, bright polished and fixed, type B-12 complete all as specified and as directed.

S&F butt hinges of size 100mm extruded aluminium alloy with galvanized mild steel hinge pin, anodized type B-21 complete all as specified and as directed.

S&F butt hinges of size 100mm extruded aluminium alloy powder coated with galvanized mild steel hinge pin, type B-21 complete all as specified and as directed.

S&F 150 mm long aluminium anodized barrel tower bolts of extruded section (ISI marked) complete all as specified and as directed.

S&F 100 mm long aluminium powder coated barrel tower bolts of extruded section complete all as specified and as directed.

S&F 150mm size aluminium handle, cast type, anodized, ISI marked, complete all as specified and as directed.

S&F 100mm size aluminium handle, cast type, powder coated, complete all as specified & as directed.

S&F 100mm size extruded brass handle, fabricated type polished complete all as specified and as directed.

S&F 100mm size stainless steel fancy type bright finish handle complete all as specified and as directed.

S&F 75mm size hasp and staple, safety type, aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified & as directed.

S&F 100mm size hasp and staple, safety type, aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified & as directed.

S&F 300 mm long stainless steel, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast stainless steel complete all as specified and as directed.

S&F iron body capsule door closure of best quality for glazed & skeleton door shutters, standard size, conforming to the sample kept in GE’s office, complete all as specified and as directed.

S&F mild steel stove enameled black handles 150mm long for steel windows, left or right, fixed to steel windows with nut, bolt and washer complete all as specified & as directed.

S&F mild steel magnet catcher of best quality with mild steel striking plate fixed with screws, conforming to the sample kept in GE’s office, complete all as specified and as directed.

S&F Telescopic Channels 20 inch long with & including all necessary accessories, powder coated iron in Nickel / Silver / Black colour as approved by GE, superior quality, complete all as specified & as directed. Make : GODREJ / HETTICH / EBCO

S&F cabinet lock diecast stainless steel atleast 18mm outer side cylinder diameter with two keys superior quality for drawers etc complete all as specified & as directed.

Supply and fixing Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

Supply and fixing Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, fixed in repairs, complete all as specified and as directed.

S&F in repairs stainless steel drapery rod of 25mm inner dia & 1.6mm wall thickness (in lengths as directed) with & including stainless steel sockets & decorative finial at both ends and pair of stainless steel brackets & stops fixed at both ends with PVC rawl plug & steel screws on walls/beam complete all as specified & as directed. Notes : (i) The weight of each bracket shall not be less than 100 gm. (ii) Length of steel screw shall not be less than 65mm.

S&F PVC hand rail insulation sleeve 50mm x 8mm of approved colour complete all as specified & as directed.

S&F rolled mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing conforming to Grade E-165 (Fe 290), complete all as specified & as directed.

S&F mild steel 0.63mm thick plain black sheet in wall cladding, steel gates and similar work, cut to size, holes punched, including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified & as directed.

S&F mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, framed signed boards, walk ways, railings, framework of water tanks and similar work including welding conforming to Grade E-165 (Fe 290), complete all as specified & as directed.

S&F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Grade E-165 (Fe 290) and fixed in position complete all as specified & as directed.

M&L for mild steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified & as directed.

M&L for mild steel TMT bars 6 to 8 mm dia cut to length, bent to shape required, including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified & as directed.

S&F factory made pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, made out of mild steel sheet of 1.25 mm thickness, including making good the disturbed surfaces of wall etc in CM 1:4, complete as specified & as directed.

S&F factory made pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, made out of mild steel sheet of 1.25 mm thickness, including making good the disturbed surfaces of wall etc in CM 1:4, complete as specified & as directed.

S&F factory fabricated pressed steel frame/box windows, ventilators with glazed and fly proof shutters provided to size and dimensions as specified & shown on drawing No. BTD-888R Sheet No. 1/5 to 5/5 & BTD-889 Sheet No. 1/4 to 4/4 or as directed by GE with & including MS grill, MS fillets, pintol hinges, tower bolts, MS handles, peg stays, MS lugs, locking arrangement, dash through bolt where required, etc complete all as specified & as directed. Notes : (i) PCC for filling in frames, glass, wire gauge and painting shall be measured & paid for separately under respective items. Provision of all other items as shown & specified on drawings shall deemed to be included in quoted rate of this item. (ii) The quoted rate shall deemed to include provision of cutting holes of suitable depth in walls for inserting lugs etc and making good dismantled portion in PCC 1:2:4 type B0 using 12.5mm graded crushed stone aggregate and CM (1:3).

S&F factory made steel window with side hung shutters including box type hinges with steel handles and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified & as directed.

S&F factory made steel window with side hung shutters including box type hinges with steel handles and steel peg stay, complete without glazing bars, dovetailed or welded, complete all as specified & as directed.

S&F aluminium frame powder coated of any colour as approved (Thickness of powder coating not less than 50 micron) for doors, windows, ventilators, partitions, with one or more rebates including joining cleat for fixing etc. complete all as specified & as directed. Note : Frame to walls etc shall be fixed with PVC rawl plugs and steel screws of length not less than 75mm at places as directed. Quoted rate shall deemed to include the same.

S&F aluminium window and ventilator shutters, powder coated of any colour as approved (Thickness of powder coating not less than 50 micron), side hung type without sash bars, aluminium sections including necessary joining cleats, glazing clips, powder coated aluminium snap beading, screws, complete all as specified & as directed. Note : Glass and rubber neoprene packing / rubber gasket shall be measured and paid for separately as “Supply only” under respective item of this Schedule.

Supply only rubber neoprene packing / rubber gasket of required size & profile suitable for glazing etc in aluminium frame work in doors, windows, etc complete all as specified & as directed.

Supply & fixing in repairs steel rolling shutters, thickness of laths 1.00 mm, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, complete, push pull or manual type, with safety lever locks mild steel with 4 levers, complete all as specified and as directed.

S&F Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and as directed.

S&F Ball bearing for rolling shutters complete all as specified and as directed.

M&L for running welding in repairs, thickness of metal to be welded exc 6 mm but not exc 9mm, complete all as specified & directed.

S&F in repairs 0.56mm thick plain, Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip, expansion joints, crumple joints and straight flashing (length and girth as fixed) including necessary plugging & fixing with chromium plated steel screws & cup washers complete all as specified & as directed.

S&F 2mm thick fibre glass reinforced translucent plain sheeting fixed to wall etc with PVC rawl plugs and steel screws of length not less than 75mm with plate washers @ 450mm C/C and MS flat complete all as specified & as directed. Notes : (i) MS flat shall be measured and paid for separately under relevant item. (ii) Shade & design pattern of sheet shall be as directed by the GE.

Dismantling of brick tiles or terracing tiles single layer on roofs, complete all as specified and as directed. Note : Tiles shall be dismantled carefully and stacked properly including segregating the serviceable & unserviceable tiles as directed. Serviceable tiles shall be reused under the respective item of this Schedule.

Demolition of lime concrete of any description over roof including removal of over growth, scrubs, plants and treees with roots complete all as specified and as directed.

M&L for 10mm thick rendering (screeding) over roof slab in CM 1:6, mixed with integral liquid water proofing compound as per manufacturer’s instructions, finished fair & even, complete all as specified and as directed. Note : Supply only integral liquid water proofing compound shall be measured and paid for separately.

M&L for cleaning of all loose dirt and dust from roof and priming the surface with one coat of cold applied bituminous primer @ 0.40 litre/sqm and provide a layer of APP based polymeric membrane minimum weighing 3 Kg/sqm and minimum 3mm thick, reinforced with polyester non woven fabric (weighing not less than 150 gms/sqm) laid on primed surface complete all as described in Para 11.44.5 of SSR Part-I, complete all as specified and as directed. Note : The net area of water proofing treatment shall be measured without any extra allowance for laps.

M&L for Lime concrete terracing in roof with minimum thickness at edge 40 mm and increasing uniformly towards ridges to obtain a chain slope of (1:40) as described in Para 11.27.2 of MES Schedule Part-I complete all as specified & as directed.

M&L for 40mm thick burnt clay brick tiles, joints grouted flush in cement mortar (1:3) mixed with integral liquid water proofing compound @ 3% by weight of cement, laid on roof over & including 15 mm thick cement mortar (1:6) bedding, complete all as specified & as directed.

All as per serial item No. 81.00 here-in-before but except brick tiles. Note : Old serviceable brick tiles retrieved from serial item No 76.00 here-in-before shall be used under this item.

M&L for rendering 10mm thick in cement mortar 1:3 on fair faces of brick masonry or concrete surfaces of walls in Sunken portion, mixed with integral liquid water proofing compound as per manufacturer’s instructions, finished even & smooth without using extra cement complete all as specified. Note : Supply only integral liquid water proofing compound shall be measured and paid for separately.

M&L for removal of loose concrete and cleaning the surfaces and filling the cracks with Polymer modified mortar using Dr Fixit Pidicrete URP or other equivalent product as approved by GE and thereafter applying two coats of Dr Fixit Bathseal WPC or other equivalent product as approved by GE in Sunken areas complete all as per manufacturer’s instructions, specified & directed. Note : Where contractor desire to use equivalent product of Dr Fixit Pidicrete URP and Dr Fixit Bathseal WPC, he shall submit the technical literature of equivalent products to establish the equivalency of products to the entire satisfaction of GE and both products shall be of same manufacturer as approved by the GE.

M&L for PCC 1:2:4 Type B0 using 12.5mm graded stone aggregate as in concave shape benching (gola) of 80mm radius at junctions of roof/terrace with parapets / side walls with surface finished even & smooth without using extra cement complete all as specified & as directed.

M&L for galvanized iron tubing medium grade of 50 mm bore (ISI marked) as in spout for sunken floors and similar works, fixed in repairs, complete all as specified & as directed. Notes : (i) Free end of spout shall be cut at 45 degree angle. (ii) Length of spout shall be as directed by Engineer-in-Charge.

M&L for factory made cement concrete tiles, 25cm x 25cm x 22mm thick, machine pressed, with grey cement & no pigment, set, jointed and pointed in neat cement slurry in floors, and cut and polished, over & including 15mm thick screed bed in cement & sand mortar 1:4, complete all as specified & as directed.

M&L for 75mm thick PCC (1:2:4) type B2 using 40mm graded crushed stone aggregate as in flooring etc, surface finished even & smooth without using extra cement, complete all as specified and as directed.

S&F Plastic dividing strips, 1.5mm thick, 38mm wide, inserted in position, conform to design, complete all as specified & as directed.

M&L for 25mm thick PCC (1:2:4) type B0 using 12.5mm graded crushed stone aggregate as in flooring, leveling course, etc, surface finished fair and even, complete all as specified and as directed.

M&L for machine cut Kota stone slab flooring 20 to 25mm thick laid over & including screed bed or bedding layer of 20mm thick in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab with true & uniform joints including rubbing and mirror polishing complete all as specified & as directed.

M&L for machine cut Kota stone slab 16 to 18mm thick on vertical surfaces such as dado, skirting etc. laid over & including 10mm thick rendering (as screed bed) in cement & sand mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab with true & uniform joints including rubbing and mirror polishing complete all as specified & as directed.

M&L for 16 to 18mm thick Granite (of any type) machine cut slab of approved shade (table rubbed and mirror polished) with true & uniform joints as in steps, jambs, pillars, window cills, cooking platforms & like and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over & including 15mm thick screed bed (bedding layer) in CM 1:4 with cement slurry @ 3 Kg/Sqm complete all as specified & as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified & as directed.

M&L for non skid ceramic tiles (coloured) 7 to 8mm thick, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed.

M&L for double charged vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured (shade & pattern as approved by GE), area of each tile not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and directed.

M&L for glazed ceramic tiles (coloured) 7mm thick, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm (i.e 450mm x 350mm / 300mm x 450mm or as directed), on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick rendering (as screed bed) in cement & sand mortar 1:4 complete all as specified and as directed.

M&L for non skid ceramic tiles (coloured) 7 to 8mm thick, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, on vertical surfaces such as skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick rendering (as screed bed) in cement & sand mortar 1:4, size of tiles as directed by GE to match the size of non skid ceramic tiles provided in floor under respective item in this Schedule, complete all as specified and as directed.

M&L for double charged vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured (shade & pattern as approved by GE), area of each tile not exceeding 0.36 sqm, on vertical surfaces such as skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick screed bed in cement & sand mortar 1:4, size of tiles as directed by GE to match the size of vitrified tiles provided in floor under respective item in this Schedule, complete all as specified and as directed.

M&L for Chequered cement concrete coloured tiles having rubber hard top finish with polymer admixtures in any pattern or design of minimum size 30 cm x 30 cm x 25 mm thick set jointed and pointed in neat cement slurry in floor over & including 15mm thick screed bed in cement mortar 1:4, complete all as specified & as directed.

M&L for 75mm thick PCC 1:3:6 type C1 using 20 mm graded crushed stone aggregate as in plinth protection surface finished even and smooth without using extra cement complete all as specified. Note :- Plinth protection shall be of width as directed and shall be laid with an outward slope of 1:20 in alternative bays not exceeding 2.5 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3).

M&L for rendering 10mm thick in cement mortar 1:6 on fair faces of brick masonry or concrete surfaces of walls, finished even & smooth without using extra cement complete all as specified & as directed.

M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick masonry or concrete surfaces of walls, mixed with integral liquid water proofing compound as per manufacturer’s instructions, finished even & smooth without using extra cement, complete all as specified and directed. Note : Supply only integral liquid water proofing compound shall be measured and paid for separately.

M&L for rendering 5mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement complete all as specified & directed.

M&L for 15mm thick rendering in two layer on concrete surfaces of chajjas consisting of 1st layer of 10mm thick plaster in CM 1:4 and 2nd layer (setting coat or top layer) of 5 mm thick plaster in CM 1:4, 2nd layer mixed with integral liquid water proofing compound as per manufacturer’s instructions, finished fair & even, complete, all as specified and directed. Note : - Supply only integral liquid water proofing compound shall be measured and paid for separately.

S&F GI wire netting 0.90mm dia and 12mm mesh lathing in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste, complete all as specified & as directed.

M&L for preparation of old surfaces (plastered or unplastered) of walls including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying two coats of white wash complete all as specified & as directed.

M&L for preparation of old surfaces (plastered or unplastered) of ceilings including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying two coats of white wash complete all as specified & as directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade/tint over a coat of primer over & including 3mm thick white wall care putty complete all as specified & as directed. Note : The surface of wall care putty shall be smoothened with finer sand paper before applying primer.

M&L for preparation of new plastered surfaces of ceiling and applying two coats of oil emulsion distemper (OBD) of approved shade/tint over a coat of primer over & including 3mm thick white wall care putty complete all as specified & as directed. Note : The surface of wall care putty shall be smoothened with finer sand paper before applying primer.

M&L for complete removal of existing treatment by mechanical equipments like electric wall sander including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade/tint using rollers over a coat of primer over & including 3mm thick white wall care putty on walls complete all as specified & as directed. Note : The surface of wall care putty shall be smoothened with finer sand paper before applying primer.

M&L for complete removal of existing treatment on ceilings by mechanical equipments like electric wall sander including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces and applying two coats of oil emulsion distemper (OBD) of approved shade/tint using rollers over a coat of primer over & including 3mm thick white wall care putty on ceilings complete all as specified & as directed. Note : The surface of wall care putty shall be smoothened with finer sand paper before applying primer.

M&L for preparation of newly plastered surfaces of wall & chajjas and applying two coats of Acrylic emulsion paint (Exterior grade) of approved shade/tint over a coat of suitable priming paint complete all as specified & as directed.

M&L for complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces and applying two coats of Acrylic emulsion paint (Exterior grade) of approved shade/tint over a coat of suitable priming paint on walls complete all as specified and as directed.

M&L for carefully making a hole of size suitable for fixing 65mm bore PVC pipe through the 23cm thick brick wall at ground floor & first floor of building with & including fixing of 65mm bore PVC pipe (ISI marked) through the wall from internal surface to external surface for passing of copper tubing of split AC and making good the disturbed surfaces in CM 1:3 with & including covering the hole both sides with 3mm thick phenolic laminated sheet top cover in round shape of 100mm dia fixed with PVC rawl plugs & cadmium plated brass screws complete all as directed. Note : The pipe shall be fixed slightly slanting towards outer face of wall as directed by Engineer-in-Charge.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfaces, complete all as specified & as directed.

S&F 4mm thick figured glass pin head type and glazing with oil putty in square not exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfaces, complete all as specified & as directed.

Supply only plain sheet glass 5.00 mm thick ordinary quality in required sizes, not exc 0.5 sqm in each pane, complete all as specified and as directed (for aluminium windows/ventilators).

M&L for complete removal of existing treatment on wooden surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of pink primer including finishing with wooden putty after preparation of surfaces complete all as specified & as directed.

M&L for preparation of new surfaces of wood or wood based materials of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of pink primer complete all as specified & as directed.

M&L for preparation of old painted steel and iron surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of approved tint all as specified & as directed.

M&L for preparation of new steel and iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of red oxide, zinc chrome primer complete all as specified & as directed.

M&L for French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified & as directed.

Dismantling carefully and taking up or down existing unserviceable/serviceable steel water tubing and connections of 15mm bore complete all as specified and as directed.

M&L for galvanized steel water tubing medium grade (ISI marked) of 15mm bore with & including all fittings, fixed to walls and ceilings or laid in floors, complete all as specified and as directed.

Fixing/Laying only, jointing and testing old serviceable galvanized steel water tubing medium grade of 15mm bore obtained serviceable vide serial item No. 122.00 here-in-before including cleaning the pipe from inside & outside properly including rust & mud removal, with & including new fittings and fixed to walls and ceilings or laid in floors in new or old position complete all as specified and as directed. Note : The quoted rate shall deemed to include new GI fittings (ISI marked). Old fittings shall not be used.

Dismantling carefully and taking up or down existing unserviceable/serviceable steel water tubing and connections of 20mm bore complete all as specified and as directed.

M&L for galvanized steel water tubing medium grade (ISI marked) of 20mm bore with & including all fittings, fixed to walls and ceilings or laid in floors, complete all as specified and as directed.

Fixing/Laying only, jointing and testing old serviceable galvanized steel water tubing medium grade of 20mm bore obtained serviceable vide serial item No. 125.00 here-in-before including cleaning the pipe from inside & outside properly including rust & mud removal, with & including new fittings and fixed to walls and ceilings or laid in floors in new or old position complete all as specified and as directed. Note : The quoted rate shall deemed to include new GI fittings (ISI marked). Old fittings shall not be used.

Dismantling carefully and taking up or down existing unserviceable/serviceable steel water tubing and connections of 25mm bore complete all as specified and as directed.

M&L for galvanized steel water tubing medium grade (ISI marked) of 25mm bore with & including all fittings, fixed to walls and ceilings or laid in floors, complete all as specified and as directed.

Fixing/Laying only, jointing and testing old serviceable galvanized steel water tubing medium grade of 25mm bore obtained serviceable vide serial item No. 128.00 here-in-before including cleaning the pipe from inside & outside properly including rust & mud removal, with & including new fittings and fixed to walls and ceilings or laid in floors in new or old position complete all as specified and as directed. Note : The quoted rate shall deemed to include new GI fittings (ISI marked). Old fittings shall not be used.

M&L for cutting chases, pinning in, making good to facings as original where required and pointing in cement mortar 1:3 for concealed water tubing etc. and making good, cutting exc 10 cm but not exc 20 cm girth in brick walls, complete all as specified & as directed.

Drilling and tapping cast iron or galvanized iron water mains (in position) for branch connections of the internal dia 25mm complete all as specified & as directed.

Disconnecting & taking down the existing unserviceable water tank and Supply and fixing 500 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top), ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I and as directed.

S&F in repairs Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe 20mm bore (minimum weight 210 gms) complete all as specified and as directed.

S&F in repairs vitreous china squatting pan, ‘Orissa’ pattern, white, size 580x440mm with integral foot rests, ‘P’ or ‘S’ trap, including connection to trap and flushing pipe, antisyphonage pipe etc, making good to floor in CM 1:3, complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet pan (Pedestal pattern), white, including connection to drain (or outgoing pipe) and to flushing pipe, anti-sypohonage pipe etc., with builtin 'P' Trap, with plastic WC seat cover (white) closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device, complete all as specified & as directed.

S&F in repairs PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, 32 mm dia flush pipe of polyethylene of low or high density or PVC, connected to water closet, complete all as specified & as directed. Note : The long bend flush pipe shall be provided in case of ‘Orissa’ pattern pan and quoted rate shall deemed to include this aspect.

S&F in repairs vitreous china wash hand basin, white, flat back of size 550mm x 400mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete all as specified & as directed.

S&F sink with drainage board made of stainless steel 1mm thick for Kitchen with plugs, washers and wastes, including fixing with cast iron cantilever brackets, bedding in cement mortar on to brick wall, connecting union to pipe, overall minimum size 1143mm x 510 mm with bowl size 510mm x 405mm x 203 mm including 40mm dia waste pipe of polythelene of low or high density, 40mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, making holes in walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B0, complete all as specified and as directed including taking down old unserviceable sink with fittings.

S&F in repairs PVC connection 600 mm long suitable for 15 mm bore GI pipe including brass nuts on both sides complete all as specified & as directed.

S&F in repairs PVC connection 450 mm long suitable for 15 mm bore GI pipe including brass nuts on both sides complete all as specified & as directed.

S&F in repairs 15mm bore pillar tap, cast copper alloy with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks & fly nuts, screwed for iron pipes, complete all as specified & as directed. Make : Cat Part No. ‘G4902A1’ of ‘Parryware’ / Cat Part No. ‘F2002101’ of ‘Cera’ / Cat Part No. ‘CQT-23011B’ of ‘Jaquar’ / Cat Part No. ‘9202’ of ‘Prayag’ or equivalent in makes mentioned in Appendix ‘B’ here-in-after.

S&F in repairs 15 mm bore bib tap, brass, chromium plated, long body, fancy type with capstan head, screwed down, screwed for iron pipe or for brass ferrule, including CP brass wall flange, complete all as specified & as directed. Make : Cat Part No. ‘G4906A1’ of ‘Parryware’ / Cat Part No. ‘F2002152’ of ‘Cera’ / Cat Part No. ‘CQT-23047’ of ‘Jaquar’ / Cat Part No. ‘9208’ of ‘Prayag’ or equivalent in makes mentioned in Appendix ‘B’ here-in-after.

S&F in repairs wall mixer, telephonic type, brass, chromium plated, fancy type, with capstan head handles with lettered 'hot' and 'cold', screwed down high pressure, including CP brass wall flanges and necessary extension nipples screwed for 15mm bore pipe connection, complete all as specified as directed. Make : Cat Part No. ‘G4916A1’ of ‘Parryware’ / Cat Part No. ‘F2002401’ of ‘Cera’ / Cat Part No. ‘CQT-23281UPR’ of ‘Jaquar’ / Cat Part No. ‘9275’ of ‘Prayag’ or equivalent in makes mentioned in Appendix ‘B’ here-in-after.

S&F in repairs Centre hole mixer for mixing hot & cold water for wash hand basin, cast copper alloy, with dual capstan heads, chromium plated, screwed down high pressure, with lettered 'Hot' & 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe suitable for 15mm bore, complete all as specified as directed. Make : Cat Part No. ‘G4914A1’ of ‘Parryware’ / Cat Part No. ‘F2002461’ of ‘Cera’ / Cat Part No. ‘CQT-23167B’ of ‘Jaquar’ / Cat Part No. ‘9250’ of ‘Prayag’ or equivalent in makes mentioned in Appendix ‘B’ here-in-after.

S&F in repairs Wall mixer for Kitchen sink, cast copper alloy, with dual capstan heads, chromium plated, screwed down high pressure, with lettered 'Hot' & 'Cold' with shaped CP brass nipples screwed for 15mm bore connections complete all as specified as directed. Make : Cat Part No. ‘G4935A1’ of ‘Parryware’ / Cat Part No. ‘F2002511’ of ‘Cera’ / Cat Part No. ‘CQT-23309’ of ‘Jaquar’ / Cat Part No. ‘9255’ of ‘Prayag’ or equivalent in makes mentioned in Appendix ‘B’ here-in-after.

S&F in repairs 15mm bore Angle stop valve, brass, chromium plated, fancy type, screwed down, high pressure with capstan head, screwed both ends for iron pipe or for union, including CP brass wall flange, complete all as specified & as directed. Make : Cat Part No. ‘G4907A1’ of ‘Parryware’ / Cat Part No. ‘F2002201’ of ‘Cera’ / Cat Part No. 'CQT-23059’ of ‘Jaquar’ / Cat Part No. ‘9210’ of ‘Prayag’ or equivalent in makes mentioned in Appendix ‘B’ here-in-after.

S&F in repairs 15mm bore two way Angle stop valve, brass, chromium plated, fancy type, screwed down, high pressure with capstan head, screwed both ends for iron pipe or for union, including CP brass wall flange, complete all as specified & as directed. Make : Cat Part No. ‘G4943A1’ of ‘Parryware’ / Cat Part No. ‘F2002211’ of ‘Cera’ / Cat Part No. ‘9211’ of ‘Prayag’ or equivalent in makes mentioned in Appendix ‘B’ here-in-after.

S&F in repairs 20mm bore stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified & as directed.

S&F in repairs 20mm bore Gun metal gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe, complete all as specified & directed.

S&F in repairs 25mm bore Gun metal gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe, complete all as specified & directed.

S&F in repair bathroom Mirror cabinet (PTMT) of size 422mm x 622mm (minimum) (with inside partitions) with 5mm thick high quality mirror, seamless finish, light weight, high strength, fixed on wall with cadmium plated brass screws, complete all as specified & as directed. Make :- Cat Part No. 555 of Prayag or equivalent in makes mentioned in Appendix ‘B’ here-in-after.

S&F in repair Corner glass shelving 3-tier of size 300mm, 200mm & 150mm, with CP brass brackets and guard & railing, conforming to sample kept in GE's office, complete all as specified and as directed.

S&F in repairs stainless steel Peg Set of Six of standard size (not less than 300mm long) fixed to wall with two rawl plugs and chromium plated brass screws complete all as specified & as directed. Make :- Cat Part No. BEA-30 of Prayag or equivalent in makes mentioned in Appendix ‘B’ here-in-after.

S&F in repairs brass chromium plated Health Faucet with 8mm dia & 1.20m long stainless steel braided flexible tube and wall hook suitable for fixing to supply pipe of 15mm bore complete all as specified and as directed. Make :- Cat Part No. ‘ALD-573’ of ‘Jaquar’ / Cat Part No. ‘T9875A1’ of ‘Parryware’ / Cat Part No. ‘F8030301’ of ‘Cera’ or equivalent in makes mentioned in Appendix ‘B’ here-in-after.

S&F in repairs Toilet paper holder, brass, chromium plated, heavy duty, fixed with brass screw complete all as specified and as directed.

S&F in repairs Shower rose, round type, brass, chromium plated, Fancy type, 100 mm dia (minimum) with or without swivel joint, with & including CP brass arm and wall flange, fixing to steel pipe of 15mm bore or union complete all as specified and as directed. Make : Cat Part No. ‘T9809A1’ of ‘Parryware’ / Cat Part No. ‘F7010212AB’ of ‘Cera’ / Cat Part No. ‘BOS-87’ of ‘Prayag’ or equivalent in makes mentioned in Appendix ‘B’ here-in-after.

S&F in repairs Soap dish, brass, chromium plated, heavy duty, fixed to wall with plugs with brass cadmium plated screws, complete all as specified and as directed.

S&F in repairs tubular towel rail, brass chromium plated, 20mm dia, ‘D’ type, 60cm long between flanges, fixed to PVC rawl plugs with chromium plated brass screws, complete all as specified and as directed.

S&F in repairs Towel ring round brass chromium plated with round flange fixed on wall with PVC rawl plug & cadmium plated brass screws complete all as specified & as directed. Make :- Cat Part No 'ACN-1121BN' of make 'Jaquar' or equivalent in makes mentioned in Appendix 'B' here-in-after.

Dismantling of cast iron drain pipe of 100mm bore, jointed in CM and taking out of trenches or floors, if required, complete all as specified & as directed. Note :- Excavation & earthwork shall be measured and paid separately.

Supply and fixing 100 mm bore cast iron, soil, waste & vent pipes in any length with or without ears, spun pipes, ISI marked, fixed with cement joints, laid in trenches or floors, complete all as specified and as directed.

Supply and fixing 100 mm bore cast iron, soil, waste & vent pipes in any length with or without ears, spun pipes, ISI marked, fixed with cement joints, fixed to walls, complete all as specified and as directed.

All as per serial item No. 164.00 here-in-before but except pipe. Note :- Old serviceable cast iron pipes retrieved from serial item No. 162.00 here-in-before shall be used under this item.

Dismantling of cast iron drain pipe of 75mm bore, jointed in CM and taking out of trenches or floors, if required, complete all as specified & as directed. Note :- Excavation & earthwork shall be measured and paid separately.

Supply and fixing 75 mm bore cast iron, soil, waste & vent pipes in any length with or without ears, spun pipes, ISI marked, fixed with cement joints, laid in trenches or floors, complete all as specified and as directed.

Supply and fixing 75 mm bore cast iron, soil, waste & vent pipes in any length with or without ears, spun pipes, ISI marked, fixed with cement joints, fixed to walls, complete all as specified and as directed.

All as per serial item No. 168.00 here-in-before but except pipe. Note :- Old serviceable cast iron pipes retrieved from serial item No. 166.00 here-in-before shall be used under this item.

Dismantling of cast iron drain pipe of 50mm bore, jointed in CM and taking out of trenches or floors, if required, complete all as specified & as directed. Note :- Excavation & earthwork shall be measured and paid separately.

Supply and fixing 50 mm bore cast iron, soil, waste & vent pipes in any length with or without ears, spun pipes, ISI marked, fixed with cement joints, fixed to walls, complete all as specified and as directed.

All as per serial item No. 171.00 here-in-before but except pipe. Note :- Old serviceable cast iron pipes retrieved from serial item No. 170.00 here-in-before shall be used under this item.

Extra over cast iron pipe & fitting 100mm bore providing lead joints in lieu of cement joints complete all as specified and as directed.

Extra over cast iron pipe & fitting 75mm bore providing lead joints in lieu of cement joints complete all as specified and as directed.

S&F stack clamp made out of MS flat 50mm x 5mm and 16 mm dia round iron stays, including bolts & nuts, securing ends of stays to walls or roof for 100mm bore pipe including two coats of synthetic enamel paint over a coat of red oxide primer including preparation of surfaces complete all as specified & as directed.

S&F stack clamp made out of MS flat 50mm x 5mm and 16 mm dia round iron stays, including bolts & nuts, securing ends of stays to walls or roof for 75mm bore pipe including two coats of synthetic enamel paint over a coat of red oxide primer including preparation of surfaces complete all as specified & as directed.

S&F stack clamp made out of MS flat 50mm x 5mm and 16 mm dia round iron stays, including bolts & nuts, securing ends of stays to walls or roof for 50mm bore pipe including two coats of synthetic enamel paint over a coat of red oxide primer including preparation of surfaces complete all as specified & as directed.

S&F in repairs 100mm bore cast iron branch piece, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete all as specified & as directed.

S&F in repairs 75mm bore cast iron branch piece, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete all as specified & as directed.

S&F in repairs 100mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified & as directed.

S&F in repairs 100mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) with oval access door complete all as specified & as directed.

S&F in repairs 75mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified & as directed.

S&F in repairs 75mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) with oval access door complete all as specified & as directed.

S&F in repairs 100mm bore cast iron Tee, diminishing pieces or tapers (larger bore measured) with oval access door complete all as specified & as directed.

S&F in repairs 100mm bore cast iron bend (any radius) with duck’s foot or heel rest complete all as specified & as directed.

S&F in repairs 100mm cast iron sanitary connection socket to fit WC out-let complete all as specified & as directed.

S&F in repairs cast iron cowl for 100 mm bore CI pipe complete all as specified & as directed.

S&F in repairs cast iron cowl for 50 mm bore CI pipe complete all as specified & as directed.

S&F in repairs long arm cast iron floor trap of 75 mm bore including jointing to waste pipe, fixed in cement concrete type B1 (1:2:4), complete all as specified & as directed.

S&F in repairs Stainless steel grating with outer square frame suitable for 100 mm dia trap/pipe fixed with white cement, complete all as specified & as directed.

S&F in repairs Stainless steel grating with outer square frame and hole for waste pipe suitable for 100 mm dia trap/pipe fixed with white cement, complete all as specified & as directed.

Taking down PVC pipes and rainwater pipes of 110mm & 75mm bore including all fittings & accessories complete all as specified & as directed. Note :- The measurement shall be taken along the centre line of pipe and fittings. Excavation work shall be measured separately.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints / solvent cement joints fixed to walls complete all as specified & as directed.

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints / solvent cement joints fixed to walls complete all as specified & as directed.

S&F 110mm bore PVC (SWR) bend, any radius complete all as specified & as directed.

S&F 75mm bore PVC (SWR) bend, any radius complete all as specified & as directed.

S&F Steel Fibre Reinforced Concrete (SFRC) manhole cover and frame, Light duty (LD-2.5 grade designation) of 560 mm internal dia, conforming to IS-12592, ISI marked, fixed in position with cement mortar (1:4)/PCC type B-1 complete all as specified and as directed.

Demolition and breaking up 150mm / 200mm bore SGSW/RCC/AC drain pipes set in cement mortar including PCC haunching and bedding and removal of demolished material to a distance exc 250m but not exc 500m complete all as specified and as directed.

S&F salt glazed stone ware drain pipes of 150mm bore, Class ‘SP 2’, ISI marked, laid to slope in trenches, jointed in CM (1:1) and tested complete all as specified & as directed.

S&F salt glazed stone ware drain pipes of 200mm bore, Class ‘SP 2’, ISI marked, laid to slope in trenches, jointed in CM (1:1) and tested complete all as specified & as directed.

M&L for PCC 1:4:8 type D2 using 40 mm graded crushed stone aggregate in bedding to SGSW drain pipes, including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete all as specified and as directed.

M&L for PCC 1:4:8 type D2 using 40 mm graded crushed stone aggregate in bedding to SGSW drain pipes, including packing under and haunching against the sides of pipes after they are laid and tested for 200 mm bore pipe complete all as specified and as directed.

Taking down carefully existing unserviceable/perished surface conduit/ concealed conduit/ batten/ casing caping aluminium/copper point wiring any type for light, fan, bell, socket, power point etc complete including all fixtures and fittings such as batten/conduit/casing caping, switches, sockets, ceiling rose, pendent holder, lamp holders, bracket holders, light fittings, top sheet covers, fan regulators, wooden boxes, MS sunken boxes, etc and making good the disturbed surfaces of wall, floors, ceiling, etc to match with the adjoining surfaces, complete all as specified and as directed.

M&L for point wiring for one light/fan/bell/buzzer point controlled by one, one way switch with 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade (ISI marked) including 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade (ISI marked) as continuous earth wire in green colour to common earth and connected to earth dolly laid/drawn into and including non-metallic rigid PVC concealed conduit (medium duty, ISI marked, not less than 20mm dia) with all fittings such as tee, bends, etc all as per IS, terminated in & including new sunk type pressed steel terminal boxes concealed in wall for mounting fittings like switches, sockets, regulators etc with and including 3mm thick phenolic laminated sheet top cover, complete all as specified and as directed. Note : Cost of cutting/leaving forming chases for conduits, sinking for boxes and making good in CM 1:4 shall deemed to be included in quoted rate of this item.

All as per serial item No. 203.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on same board with other switches.

All as per serial item No. 203.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on independent board.

All as per serial item No. 203.00 here-in-before but for one light point controlled by two, two way switches.

All as per serial item No. 203.00 here-in-before but for one 3 pin 15/16 Amps socket outlet controlled by one 15/16 Amps switch on independent board with 4 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade (ISI marked) including 4 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade (ISI marked) as continuous earth wire in green colour.

S&F switch piano, flush type, single pole, one way, 6 Amp, ISI marked, complete all as specified and as directed.

S&F switch piano, flush type, single pole, two way, 6 Amp, ISI marked, complete all as specified and as directed.

S&F bell push, flush type, 6 Amp, ISI marked, complete all as specified and as directed.

S&F socket outlet, 3 pin (2 in 1, with 2 pin outlet also), 6 Amp, flush type, ISI marked, complete all as specified and as directed.

S&F switch socket combination, 2 in 1, 6 Amps, flush type, ISI marked, complete all as specified & as directed.

S&F switch socket combination, 5 in 1, 6A/16A Amps, flush type, ISI marked, complete all as specified & as directed.

S&F ceiling rose, PVC/Polycarbonate insulated body, 65mmx50mm with three terminals, ISI marked, complete all as specified and as directed.

S&F lamp holder, PVC/Polycarbonate insulated body with back plate suitable for conduit/casing caping fittings, ISI marked, complete all as specified and as directed.

S&F electronic fan regulator, flush type, stepped type with 5 step control, 230 Volts, 150 Watt, 2 modules including making hole in sheet top cover and connecting up, ISI marked, complete all as specified and as directed.

Supply and fixing Bell ‘Ding Dong’ / ‘Multi Music’ Type, AC, 230 Volts, ISI marked, complete all as specified and as directed.

Supply and fixing mounting bracket (suitable for fixing/holding street/security light fittings) made of 40mm bore GI pipe ‘light grade’ not less than 1.20m long, bent to shape at required angle, fixed to Pole/wall with & including mild steel clamps (02 Nos) made out of flat iron 50x6mm with nuts, bolts & washers, matching with section of Pole/suitable for wall, complete all as specified and as directed.

S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp, 230 Volt, 10 kA, ‘C’ Curve, ISI marked, fixed in repairs, complete all as specified and as directed.

S&F sheet metal enclosure for distribution boards flushed in wall, double door type, suitable for fixing MCBs/MCCBs, 415 Volts with 200 Amps rated bus bar, load line DB fitted with bus bar, neutral links blank plates, ETPN, load line, 6 ways, ISI marked, suitable for 3 Pole / 4 Pole ‘A’ frame MCB, fitted with and including following accessories, complete all as specified and as directed including taking down old existing unserviceable DB with fixtures of any type & capacity :- (a) MCB, 40 Amps, TPN, 415 Volts, 50 Hz, 10 kA, ‘C’ Curve, ISI marked – 01 No Notes : (i) Cost of cutting/leaving forming chases for sinking for DB and making good in CM 1:4 shall deemed to be included in quoted rate of this item. (ii) DB and MCB shall be of same make.

S&F sheet metal enclosure for distribution boards flushed in wall, double door type, suitable for fixing MCBs/MCCBs, 415 Volts with 200 Amps rated bus bar, load line DB fitted with bus bar neutral links blank plates, TPN, vertical load line, 12 ways, ISI marked, suitable for 3 Pole / 4 Pole ‘A’ frame MCCB, fitted with and including following accessories, complete all as specified and as directed including taking down old existing unserviceable DB with fixtures of any type & capacity :- (a) MCCB, 4 Pole, 100 Amps rating, rupturing capacity 25 kA, 415 Volt grade, AC, 50 Hz, Fixed Thermal & Fixed Magnetic setting, ISI marked – 01 No (b) MCB, 40 Amps, TPN, 415 Volts, 50 Hz, 10 kA, ‘C’ Curve, ISI marked – 04 Nos Notes : (i) Cost of cutting/leaving forming chases for sinking for DB and making good in CM 1:4 shall deemed to be included in quoted rate of this item. (ii) DB, MCCB and MCB shall be of same make.

S&F MCB, 6 to 32 Amps, Single Pole, 240 Volts, 10 kA, ‘C’ Curve, with over load and short circuit protection, ISI marked, fixed in repairs, complete all as specified and as directed.

Taking down carefully existing ceiling fan of any sweep with down rod, sealing cable ends, dismantling blades and depositing the fans to Store yard of AGE E/M (N) Bikaner complete all as specified and as directed. Notes :- (i) The fans shall be deposited to Store yard of AGE E/M (N) Bikaner through proper nominal receipt voucher. (ii) If fan or any of its part/accessories is lost or damaged during the execution of this item by the contractor’s workmen, the same shall be provided by the contractor at his own cost as per the original part/accessories complete to the entire satisfaction of GE.

Hanging only ceiling fan of any sweep and connecting up with and including provision of new 3 core sheathed flexible copper cable 1.5 sqmm of suitable length from ceiling rose or connector to fan, complete all as specified and as directed. Notes :- (i) The fans shall be issued from Store yard of AGE E/M (N) Bikaner through proper nominal issue voucher. (ii) If fan or any of its part/accessories is lost or damaged during the execution of this item by the contractor’s workmen, the same shall be provided by the contractor at his own cost as per the original part/accessories complete to the entire satisfaction of GE.

Taking down carefully existing exhaust fan of any sweep, sealing cable ends, dismantling blades and depositing the fans to Store yard of AGE E/M (N) Bikaner complete all as specified and as directed. Notes :- (i) The fans shall be deposited to Store yard of AGE E/M (N) Bikaner through proper nominal receipt voucher. (ii) If fan or any of its part/accessories is lost or damaged during the execution of this item by the contractor’s workmen, the same shall be provided by the contractor at his own cost as per the original part/accessories complete to the entire satisfaction of GE.

M&L for taking down carefully existing exhaust fan of 300mm / 450mm sweep, repair to fan to make it fully functional with & including rewinding with super enamelled copper winding wire of same gauge, same weight & turns including varnishing of winding, over hauling, replacement of worn out bush, bearing, oil filled capacitor 4 mfd, rubber pad for legs, screws, oiling, greasing, etc as required & directed, spray painting of complete fan with synthetic enamel paint of approved shade/tint including proper cleaning & preparation of surfaces including writing MES/ SM No on fan with thick white synthetic enamel paint and re-fixing the fan and connecting up with and including 3 core sheathed flexible copper cable 1.5 sqmm of suitable length upto ceiling rose, complete all as specified and as directed.

Supply & fixing Exhaust fan of 300mm sweep, heavy duty, double ball bearing, copper wound, steel body, 900 RPM, Single Phase 230 Volt, 50 Hz AC supply complete with blades, frame and louver shutter and connecting up with & including three core PVC insulated PVC sheathed copper conductor flexible cable 24/0.2 mm drawn into & including flexible PVC conduit and fixed by using 4 Nos, 100mm long 8mm dia bolt nuts and washers and grouted in wall in CM (1:3) with and including making suitable opening in existing wall complete all as specified & as directed

M&L for carefully disconnecting electric & water connections and taking down existing serviceable Geyser (water storage type) of capacity 25/50 litre vertical type and re-fixing the same with & including ‘Anchor’ type /fastener type bolts & nuts (Set of 4 bolts of suitable size but not less than 10mm dia 125mm long with nuts & washers) into the wall grouted properly to hold the geyser and making good the disturbed surface as original and re-connecting electric & water connections, complete all as directed.

Supply, installation & testing electric Geyser (water storage type) of capacity 25 litre, vertical mounting type, glass lined inner tank, rust proof outer body, 2 KW heating element, suitable for 230V Single Phase 50 Hz AC supply, 5 Star rating, energy efficient, 8 Kg/sqcm pressure withstanding capacity, Class I, ISI marked, with & including Thermostat with Thermal Cutout, heating indicator, Multi functional valve (acts as pressure release valve, non-return valve, expansion valve and vacuum release valve), fixed all as per manufacturer’s instructions, fixed with & including ‘Anchor’ type /fastener type bolts & nuts (Set of 4 bolts of 12mm dia 200mm long with nuts & washers) into the wall grouted properly to hold the geyser and making good the disturbed surface in CM (1:3), complete all as specified & as directed.

Disconnecting and taking down carefully existing serviceable electric energy meter of any type / capacity including removing of electric connections and depositing the meters to Store yard of AGE E/M (N) Bikaner complete all as specified and as directed. Notes :- (i) The energy meters shall be deposited to Store yard of AGE E/M (N) Bikaner through proper nominal receipt voucher. (ii) If meter or any of its part is lost or damaged during the execution of this item by the contractor’s workmen, the same shall be provided by the contractor at his own cost complete to the entire satisfaction of GE.

Supply, installation, testing & commissioning tamper proof Three Phase, 4 wire, prepaid cum postpaid energy meter, BIS 15884 marked including meter board/floor panel with pre-payment capacitive touch key pad, Bluetooth based digital, current range 10 to 60 Amps, 415 Volts, AC, 50 Hz, Class 1 accuracy, alongwith parallel home display split unit, with builtin feature sense the DG mode through PLSI, dual source registration with respect to grid as well as DG supply, wireless, without DCU & Sim, no other extra equipment required for dual sense, meter itself capable for dual sensing, dynamic load allocation facility from Grid and DG, capable to define 4 tariff slabs, happy hour & holiday definition, complete all as specified & as directed including disconnecting and taking down existing electric energy meter of any capacity. Note :- Contractor shall furnish the manufacturer’s or their service provider's replacement warranty of 10 (Ten) years for meter complete from the date of completion of contract to the Engineer-in-Charge. The meter will be replaced on site free of cost by the contractor in the warranty period of 10 years within fifteen days of written direction of the Engineer-in-Charge/GE. Make : ‘SECURE’ Model ‘LIBERTY 3P’ or equivalent in L&T / HPL / HAVELLS / GE / SCHNEIDER.

Material and labour for earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m deep below normal ground level and connected to and including galvanized iron earth wire 4 mm dia by means of GI nuts, bolts, check nuts, washers thimbles, etc as shown in electrical plate No 3 of SSR Part-I and connection to main switch board/Test point/panel/equipment and testing on completion including excavation and earth work in any type of soil, returning filling in, and removal of surplus spoil to a distance not exc 50 metre, charcoal and salt in alternate layer 15 cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe medium grade 20 mm bore for watering and 15 mm bore 7.50 metre long GI pipe light grade for earth wire protection fixed with poles with two clamps, made from MS flat 25 mmx3mm, bolts, nuts and washers, PCC chamber (1:3:6) type C1, 40 mm thick RCC pit cover, etc complete all as specified & as directed including dismantling & taking out old existing unserviceable earthing. Note : PCC chamber shall be constructed at least 1.5 mtr away from the earth electrode and pipe for watering shall be provided in slanting manner.

M&L for sub main wiring with two runs of 4 sqmm (nominal area) size main cable & one run of 4 sqmm size earth continuity conductor, single core, PVC insulated, unsheathed, FRLS with multi-stranded copper conductor, 1100 Volts grade, ISI marked cables, drawn through & including suitable size of heavy duty non-metallic rigid PVC concealed conduit ISI marked not less than 25mm dia & conduit fittings/accessories, fixed concealed in wall/ceiling complete including dismantling & taking down old unserviceable sub main wiring of any size / type complete all as specified & as directed. Notes :- (i) 02 runs of 4 sqmm size main cable, 01 run of 4 sqmm size earth continuity conductor cable & conduit with accessories shall be measured as one run length for payment purpose. (ii) Cost of cutting/leaving forming chases for conduits and making good in CM 1:4 shall deemed to be included in quoted rate of this item.

M&L for sub main wiring with two runs of 6 sqmm (nominal area) size main cable & one run of 6 sqmm size earth continuity conductor, single core, PVC insulated, unsheathed, FRLS with multi-stranded copper conductor, 1100 Volts grade, ISI marked cables, drawn through & including suitable size of heavy duty non-metallic rigid PVC concealed conduit ISI marked not less than 25mm dia & conduit fittings/accessories, fixed concealed in wall/ceiling complete including dismantling & taking down old unserviceable sub main wiring of any size / type complete all as specified & as directed. Notes :- (i) 02 runs of 6 sqmm size main cable, 01 run of 6 sqmm size earth continuity conductor cable & conduit with accessories shall be measured as one run length for payment purpose. (ii) Cost of cutting/leaving forming chases for conduits and making good in CM 1:4 shall deemed to be included in quoted rate of this item.

M&L for sub main wiring with four runs of 10 sqmm (nominal area) size main cable & two runs of 10 sqmm size earth continuity conductor, single core, PVC insulated, unsheathed, FRLS with multi-stranded copper conductor, 1100 Volts grade, ISI marked cables, drawn through & including suitable size of heavy duty non-metallic rigid PVC concealed conduit ISI marked not less than 32mm dia & conduit fittings/accessories, fixed concealed in wall/ceiling complete including dismantling & taking down old unserviceable sub main wiring of any size / type complete all as specified & as directed. Notes :- (i) 04 runs of 10 sqmm size main cable, 02 runs of 10 sqmm size earth continuity conductor cable & conduit with accessories shall be measured as one run length for payment purpose. (ii) Cost of cutting/leaving forming chases for conduits and making good in CM 1:4 shall deemed to be included in quoted rate of this item.

Supply, laying, jointing and testing LT XLPE insulated screened, bedded, galvanised steel strip or wire armoured heavy duty electric cable with aluminium stranded conductor 1100 Volt grade cross sectional area 70 sqmm 3.5 core laid in trenches/ducts, through pipe, under floors or roads/ along poles etc including dismantling & taking out old unserviceable cable of any size complete all as specified and as directed. Note :- (i) Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid for separately. (ii) Road cutting/floor cutting /cutting holes etc in walls required for laying/fixing of cable etc shall be made good as per existing. Nothing extra shall be admissible on this account. Quoted rates shall be inclusive of the above provisions.

M&L for dry sand (Local Tibba sand) and punning for cushioning and cover for protection of under ground electric cable complete all as specified and as directed. Notes :- (i) Approved local Tibba dry sand free from vegetations, grass and other deleterious substances shall be used. (ii) For the purpose of payment, only punned thickness shall be measured.

M&L for sub class ‘B’ (old size) burnt clay bricks laid flat and dry abutting each other with gap between adjacent bricks not exc. 10mm for protection of underground electric cable in such a way that the length of brick is at right angle to the central axis of cable complete all as specified and as directed.

M&L for Galvanized iron tubing, 50mm bore light grade, ISI marked, including all fittings and laid in trenches/under road/drains, fixed to poles/walls with required size of flat iron (25mmx3mm) clamps, bolts, nuts and washers for protection of LT electric cable complete including taking down old unserviceable pipe of any size with clamps. Note :- Excavation & earthwork shall be measured & paid for separately.

M/s R L PAREEK

SHREE GURU NANAK CONSTRUCTION COMPANY

RAJENDER ENTERPRISES