Loading…
Loading…
Tender Value
₹1.8 Cr
EMD Value
₹2.4 L
Closing Date
23 Feb 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
ENGG
14 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or V which ever is less ; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Technical Eligibility Criteria: (a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b)(1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii)One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components.
Defination of Similar Work :- Any Civil Engineering Work excluding zonal works
21 conditions · 8 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The original BG (in lieu of Bid Security) should be delivered in person or through post/courier so as to reach the official nominated (i.e.OS/Tenders/Engg/HYB Division) within before closing date for submission of bids.(i.e., excluding the last date of submission of Bids). Railway will not assume any responsibility for any delay in case the BG is sent through courier/postal department. Any BG received by post/courier on or after the closing date of bid submission shall not be taken.
AII the instructions furnished in the Technical Compliance / Commercial Compliance / Custom / Undertakings / General instructions / Undertakings are only indicative and not exhaustive. The tenderer shall read the GCC / Tender documents for complete details.
The tenderer shall thoroughly go through the entire tender documents and strictly adhere to the instructions and directions given therein.
Tender value is including escalation of (-)15% (minus ten percent) on CPWD DSR rates. Tenderer should note this before quoting the rates
SC-DHNE Section:- Provision of Standard Crash barriers at Existing ROBs (15Nos) in SC-DHNE section.
07_DRM_W_HYB_26
07_DRM_W_HYB_26
Open
Works - General
6 Months
Hyderabad, Telangana
₹0
₹2.4 L
23 Feb 2026
30 Jan 2026
9 Feb 2026
33 items across 6 schedules · ₹1,85,70,598.06 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| embankment, guide bunds, abutments, bridge gaps, etc. with contractor's to Soil Quality Class preparation of foundations benching in existing banks spreading in layers with the moisture content to compaction to specified of bank to final profile as RDSO/2020/GE: IRS- correction slips. Note: 1) Benching including on account of this, shall be paid extra under for benching. 2) Payment this item shall be made section measurements original ground profile of on initial ground levels and (ii) final profile of the with final levels as per | — | — | — | — | |
| 1 | Using Soil Class SQ2 | cum | 30.00 | 268.5 | 8,055 |
| by mechanical means Excavator)/Manual Means for of the bridges, retaining setting out, dressing of sides, getting out the excavated in layers with approved consolidation of the layers by etc. including all lift, up to a lead of 300m, all strutting with all labour and per drawing and technical by Engineer in charge. be used for excavation work other miscellaneous works foundation for OHE masts structures in connection Doubling, New lines. | — | — | — | — | |
| 2 | All kinds of soils | cum | 225.00 | 189.63 | 42,666.75 |
| shuttering including strutting, removal of form for : | — | — | — | — | |
| 3 | sub-structures, e.g. pier, retaining wall, RCC box Abutment cap, Pier Cap, & Pedestal over Pier cap, wall etc. up to 5m above | Sqm | 4500.00 | 605.99 | 27,26,955 |
| for drilling of holes and in case of Jacketing | — | — | — | — | |
| 4 | dia. holes for jacketing / | Metre | 150.00 | 116.16 | 17,424 |
| 5 | dowel bars of specified dia. extra) | Metre | 150.00 | 13 | 1,950 |
| of Precast RCC Girders / / Steel Girders etc. from of Work, unloading and at prescribed location as Engineer-in-Charge up to 60 kms. | — | — | — | — | |
| 6 | Up to 5.00 Km | MT | 150.00 | 119.08 | 17,862 |
| various size HTS holding conforming to relevant in concrete column or in with proper nuts, bolts, of holes with cement or all material, labour, T&P as | — | — | — | — | |
| 7 | grouting. | Kg | 750.00 | 115.97 | 86,977.5 |
| for minor miscellaneous duration including lubricants and consumable. arrange all statutory permits and regulations prevailing in Payment shall be made for at site. | — | — | — | — | |
| 8 | 3DX Plus or similar with bucket capacity | Hour | 150.00 | 870.14 | 1,30,521 |
| 9 | mounted Pick-n-Carry crane misc. works of handling of | Hour | 150.00 | 836.21 | 1,25,431.5 |
| Schedule total | ₹31,57,842.75 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Special Conditions
ATTACHMENT
SpecialConditionsforPaymentofSteel_1.pdf
ATTACHMENT
GCC 2022
ATTACHMENT
Tenderdocument24.09.2024_1.pdf
ATTACHMENT
ContractorseMBrecord.pdf
ATTACHMENT
RevisedBrandsandmakesapprovedlist2025.pdf Approved brand
ATTACHMENT
concretemixdesignsystemimprovements.pdf
ATTACHMENT
LaboratorySplconditionslatest.pdf
ATTACHMENT
GCC_April-2022_2022_CE-I_CT_GCC-2022_POLICY_27_04_22.pdf
ATTACHMENT
RevisedBrandsandmakesapprovedlist2025.pdf
ATTACHMENT
SC-DHNE-CrashBarrier-SpecialConditions_compressed.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .