COMPREHENSIVE MAINT TO N POCKET OF AGE B/R-I UNDER GE (W) JRC

Amount

Note : The work will be carried out internal, external and shaft portion of the multystoried bldgs upto the height of 6th floor, hence necessary safety precautions and arrangements for execution/Scaffoldings will be included in quoted rate of bidder.

Demolition of cement concrete in ground floor and paving n.exc 15 cm thick (below or above ground level complete all as specified and directed.

Demolition of brick or stone masonary built in cement mortar complete all as specified and directed.

Taking down cement plastering/grit plastering on stone wall/brick wall etc including racking out of joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L brick work with sub-class 'B' bricks, straight or curved on plan exceeding 6 M mean radius built in CM 1:6 complete all as specified and directed.

M&L Cement concrete type D 2, 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring, hard standing, manhole, drain etc complete all as specified and directed.

M & L for Plain Cement Concrete Type B1 1:2:4 (using 20 mm graded stone aggregate) cast in situ in kerbs or mud stops, rounded or chamfered on edges of paving blocks as directed including use and waste of form work complete all as specified and directed.

M&L 10mm thick rendering in CM 1:3 on brick/concrete surface as in ceiling and finishing the surface even and smooth with out using extra cement complete all as specified and directed.

M&L 15mm thick rendering on wall in CM 1:4 with appropriate WPC as per manufacturer's information from SIKA Plastocrete Plus/FOSROC/ DR Fixit/ STP/CICO on brick/concrete surface, finished even and smooth without using extra cement complete all as specified and directed.

M&L 15mm thick rendering on wall in CM 1:6 with appropriate WPC as per manufacturer's information from SIKA Plastocrete Plus/FOSROC/ DR Fixit/ STP/CICO on brick/concrete surface and finishing the surface even and smooth with out using extra cement complete all as specified and directed.

Demolition of floor hearth or wall tiling including cement mortar bedding (not backing ) removing serviceable tiles to store and rubbish of the premises complete all as specified and directed.

M&L coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface over 10 mm thick cement plaster in CM 1:4 complete all as specified and directed.

M&L non skid Coloured ceramic tiles 7 to 8 mm thick (squre or rectangle) area of each tile exce 0.11 SqM but not exceeding 0.18 SqM in floors etc, set and jointed in neat cement slurry and pinted in white or coloured cement to match with including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Demolition of cement concrete above ground floor and paving exc 15 cm thick (below or above ground level complete all as specified and directed.

M&L for 15mm thick rendering in 1:3 CM with using appropriate WPC as per manufacturer's information from SIKA Plastocrete Plus/FOSROC/ DR Fixit/ STP/CICO on brick/concrete surface, finished even and smooth without using extra cement complete all as specified and directed.

M & L Plain Cement Concrete Type A0 1:1.5:3 (using 12.5 mm graded stone aggregate) complete all as specified and directed.

M&L for priming surfaces with bituminous primer polymerised primer oil based @ 0.30kg per Sqm complete all as specified and directed.

M&L for applying coat of industrial bituminous 85/25 @ 1.20 Kg per squqre mtr including cleaning surfaces complete all as specified and directed.

M&L APP based polymeric membrance minimum weight not less than 3.0kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt not less than 150gms/sqm) land on primed surface by forced application(Complete surface sealed by gas flame) with over lap of 15 cm complete all as specified and directed complete all as spd and directed.

M & L 25mm thick cement concrete flooring type B-1, 1 :2 : 4, using 20 mm graded stone aggregate finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

M& L Cement concrete type E-2, 1:5:10 using 40mm graded brick aggregate in foundations filling and mass concrete as in sunken floor.

Cutting holes into or through brick walls built, in cement mortar superficial area n.exc 150 sq. cm upto 23cm of depth of wall for repairing of existing spout pipe complete all as specified and directed.

M & L for 40mm dia GI pipe,med grade beveled cut at both ends by making hole in walls sunken portion aprox above the RCC slab and ceiling finished the hole with cement plaster 1:2 to match with existing surface complete etc.(Measured for cutting holes shall be paid in concerned sch item)

Taking down chowkats or frames with shutters (without taking of shutter from the frame)of any description alongwith fittings n.exc 1.5 sqm each complete all as specified and directed

Taking down chowkats or frames with shutters (with out taking of shutter from the frame) of any description alongwith fittings exc 1.5 sqm n.exc 4 sqm each

S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 65x 100 mm, one or more rebates comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp- ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Providing and fixing factory made single extruded WPC(Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistur proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge.

Solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S&F factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. Tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at the site as per specification & drawing.

S & F for butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.

S&F aluminium anodised barrel tower bolts of extruded section 150mm long complete all as specified and directed.

S&F Extruded aluminium alloy handles fabricated type anodised 150mm size complete all as specified and directed.

S&F aluminium alloy anodised sliding door bolts 250 mm long with hasp, staple (bolt type)and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections as specified.

Dismantling of unframed timber scantlings in fillets, rails, posts, rafters, purlins,etc. under 40 sq. cm in section in any position complete all as specified and directed.

S & F Second class hard-wood in scantlings clean swan for holding of shelf to Cup board/ward robe etc as directed by Engr in Charge.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

S & F 25mm boarding, fixed with nails in any situation planed one side with butt joints in repair to wardrobe,Cup board as directed by Engr in Charge.

S & F for 100mm Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed.

S & F for 75mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed.

S&F aluminium anodised barrel tower bolts of extruded section 100mm long complete all as specified and directed.

S&F Extruded aluminium alloy handles fabricated type anodised 100mm size complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specifed and directed.

Cutting chases, pinning in making good to facings where reqd and pointing in cement mortar 1:3 to ends or edges of shelves , for water tubing etc and making good, cutting exc 10cm girth but not exc 20cm girth in stone walls

S&F 15mm bore GI tubing medium grade fitting complete to wall and ceiling or laid in floor complete all as specifed and directed.

S&Fin repair 15mm dia Bib taps cast copper alloywith fancy type chromium plated crutch or butterfly handle screwed down, scewed for iron pipes or for brass ferrule

S&F 15mm dia Brass stop valves chromium plated, fancy type with long shank and cup concealed type screwed down, highpressure with crutch or butterfly handle, screwed both ends for iron pipe or for unlori as specified and fixed in repairs.

S&F 15mm dia stop valves/angle valve chromium plated, fancy type with long shank and cup screwed down, highpressure with crutch or butterfly handle, screwed both ends for iron pipe or for unlori as specified .

S&F in repair Vitreous china wash hand basin (550X400mm) white, flat back excluding taps, including brackets &32mm waste cuppling complete all as specifed and directed.

S&F in repair 15mm brass CP bath mixer for mixing hot & cold water screwed down for iron pipe and fixed

S&F in repair 15mm brass CP WHB/Sink mixer for mixing hot & cold water screwed down for iron pipe and fixed

S&F in replacement CP Jet for EWC including flexible pipe complete all as specified.

S&F Vitreous China wash down Water closet pan (pedestal pattern) "with plastic water closet seat cover closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging divice (excluding flusing cistern and flush pipe) in repairs complete all as specified and directed.

S&F 10 Litre PVC valveless syphonic action flushing cistern low level white with inlet ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dis for low level cistern in repairs complete all as specified and directed.

S&F 15mm PVC connection 450mm long with PTMT nuts of superior quality as specified.

S&F in replacement CP grating 75-100mm dia circular of approved make and fixing with cement mortar 1:3 on Nahani Trap or floor trap complete all as specified.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)

M&L 75mm PVC (SWR) floor trap , plain with CP grating including jointing with solvent cement complete all as spd and directed.

Dismantling of cast iron or reinforced concrete drain pipes of size 100mm dia, jointed in cement mortar and taking out of trenches, if required.

S&F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints,fixed to walls complete.

S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls.

S&F 110mm PVC (SWR) bends provided with access door complete all as specified and directed.

S&F 75 mm PVC (SWR) bends provided with access door complete all as specified and directed.

S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F 75mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

Excavation in trenches not exc 1.5m wide and not exc 1.5m deep for foundation etc for shafts, wells, cesspits , manholes pier holes, etc n exc 10 sqm on plan and n exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.

Demolition and breaking up drain pipes 150mm bore (salt glazed ware, AC or Reinforced) set in cement mortar all as spd and directed

M &L for 150mm bore SGSW drain pipe (Grade-A) laid in trenches and jointed in CM 1:1 and tested complete all as spd and directed

M&L for concrete bed for 150mm in PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) to drain pipes including packing under,haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cms in soft /loose soil.

Removing excavated material n exc 50 m depositing where directed at a level n exc 1.5m above the starting point complete all as spd.

Demolition of re-inforced cement concrete of any description and in any position not otherwise specifically provided for.

M&L RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in precast RCC manhole / septic tanks, drain, covers including all form work and setting in CM 1:4 all as specified and shown on drgs.

M&L mild steel deformed bars 8mm dia and over cut to length bent to shape required including cranking bending and binding with and including mild steel wire annealed not less than 0.9 mm dia or securing with clips confomring to Gd I IS-432

Material and labour for cement concrete 1:2:4 Type B-1using 20 mm graded stone aggregate as in copings, weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed by the Engineer-in-Charge.

M&L for repairing of R.C.C projections, chajjias, roof slab, facia etc in patches not exceeding 3 Sqm in each patch by necessary preparation. Scarpping, cutting, chiseling derusting and cleaning exposed reinforcement, surfaces of damaged, loose R.,C.C surfaces and applying one coat of rust stop solution of approved make and filling the surfaces with cement concrete (1:1.5:3) using 12.5mm graded crushed stone aggreagates and reinforced with welded TMT bars/mesh (If Reqd) of weight exc 2 kg per sqm but n.exc 3kg/sqm with or without facia and finished with cement and sand motar (1:3) using coarse sand and thickness of R.C.C member n.exc 100mm including necessary form work and applying two coats of finishes to match with the existing surfaces in at any height complete all as specified and directed by Engr-in-charge. (Note : Cost of form work, TMT bars and welded mesh shall be deemed to be included in unit rate quoted by the contractor complete all as specified and as directed.

Dismantling asbestos cement (corrugated or semicorrugated sheets in roof coverings.

M & L for pre galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wll fixed with self tapping screws as specified.

M&L Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

Material and labour for preparation of new plastered surfaces on walls and applying two coats of oil distemper complete all as specified.

Material and labour for preparation of old painted surfaces on walls and applying one coats of oil distemper complete all as specified.

Material and labour for preparation of new plastered surfaces on walls and applying two coats of cement base paint complete all as specified.

Material and labour for preparation of old painted surfaces on walls and applying one coats of cement base paint complete all as specified.

Uprooting of trees, grass bushes etc from brick wall/roof/ other Part of building including dismantling the required brick work/ roof tiles /mud/concrete etc for uprooting the vegetation etc and make good the same to match with existing surface with same material or concrete 1:2:4 after pouring the chemical (Which destroy the growth of vegetation to the place where vegetation remove.The rate for scaffolding or any other arrangement required during this process upto 20 mtr height included.

AXIS SALES (BID ID -3367195)

FRIENDS ENGINEERS (BID ID -3367207)