Loading…
Loading…
Tender Value
₹11.7 Cr
EMD Value
₹23.4 L
Closing Date
3 Sept 2026, 3:00 pm
Yes (up to 3 members)
No
Two Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
90 days
Expenditure
Capital (Works)
BRIDGE
17 conditions · 3 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less, where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover.
The tenderers shall submit requisite information as per ANNEXURE-IX, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender.
Definition Of Similar Work : - Bridge work involving fabrication, assembling, launching/Re-girdering of open web steel girder/Steel Truss Girder/Bow String Girder.
Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed 1.1.1 on National Stock Exchange or Bombay Stock Exchange, incorporated/registered atleast 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates.
In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, 1.1.2 bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
35 conditions · 8 needing a document upload
The following documents should be specified for submission along with tender:
His capacity to undertake and carry out the work satisfactorily with details about the transport equipments, construction tools & plants etc. required for the work, maintained by him.
Detailed particulars of works he/they have executed in the last three years should be submitted along with the Tender.
List of present workload in hand has to be submitted along with the tender.
List of technical personnel proposed to be engaged in this work.
Please provide your bank details to facilitate payment through ECS.
GST Registration certificate and PAN to be submit
Tenderer/bidder has to submit his bid capacity duly certified by the chartered Accountant along with the attachments. The tender/technical bid will be evaluated based on bid capacity formula detailed as Annexure-A in the tender Document 1.6.1 (Reference-Annexure-VI, Para 10.3 & 17.15.3 of Tender Form (Second Sheet) of Annexure I of ITT) . In case, the tenderer/s failed to submit the above statement along with offer, their/his offer shall be considered as incomplete and will be rejected summarily.
The tenderers whether sole proprietor, a limited company or a partnership firm he/they should submit authentic proof in terms of partnership deed, proprietorship documents etc. along with the tender (Not required if one or more partners are authorized in Partnership deed to sign on behalf of the firm.). If he/they want to act through agent or individual partners should submit a power of attorney duly stamped and authenticated by Notary Public or by Magistrate in favour of specific person whether he/she/they are partners of the firm or any other person specifically authorizing him/her name to submit the tender, sign the agreement , receive money, witness measurements, sign measurement books, compromise, settle, relinquish any claims, preferred by firm and also sign No Claim Certificate and refer all or any disputes arbitration. The above power of attorney shall be submitted even if such specific person is authorized for above purposes through partnership deed/Memorandum of Understanding/Article of Association or such other document, failing which tender is liable to be rejected.
If it is NOT mentioned in the submitted tender that tender is being submitted on behalf of a Sole Proprietorship firm /Partnership firm / Joint Venture /Registered Company etc., then the tender shall be treated as having been submitted by the individual who has signed the tender.
After opening of the tender, any document pertaining to the constitution of Sole Proprietorship Firm / Partnership Firm /Registered Company/ Registered Trust / Registered Society/HUF etc. shall be neither asked nor considered, if submitted. Further, no suo moto cognizance of any document available in public domain (i.e., on internet etc.) or in Railway's record/office files etc. will be taken for consideration of the tender, if no such mention is available in tender offer submitted.
"No post tender correspondence will be done with the participant tenderer(s) for deficient documents/credentials noted during scrutiny of tender/offer nor any document/credential will 2.2.1 be accepted after opening of the tender and the offer shall be decided on the basis of submitted documents/Credentials downloaded with offer only".
All the mandatorily documents to be uploaded by the bidder against any compliance condition shall be opened as part of 2.2.2 technical bid and will be considered for technical bid evaluation. Non-Submission of the document shall consider as incomplete and will be rejected summarily.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
In case of any difficulty, help desk available on the website of IREPS may be approached.
Bid Security:- The tenderer(s) is required to deposit a stipulated amount as Bid Security for the performance of the tender who will keep the offer open for a period three times the tender notice period from the date fixed for opening of tender, it being clearly understood that the tenderer(s) after submitting his tender will not withdraw from his offer or modify the rates, items and conditions thereof, failing which the aforesaid amount shall be liable to be forfeited to the Railway. The Bid Security shall be deposited either in cash through e payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents. The Bank Guarantee bond shall be as per Annexure-XXIII of Tender Document and shall be valid for a period of 90days beyond the bid validity period. Details may seen in Tender Documents.
The Bid security deposited with the tender of successful tenderer will be retained as part of security deposit which will be 5 percent of the value of work awarded. The balance amount of security deposit will be recovered from on account bills of the work @ 6 percent till it reaches upto 5 percent of the value including bid security.
MAINTENANCE PERIOD - The tenderer/s shall be required to maintain the work effectively for the specified period from the date of completion as per Clause No.47 of the General Conditions of Contract, April 2022 and no part refund of Security Deposit shall be permitted during the maintenance period mentioned above.
Subsequent to the enactment of GST Act, para (a) of Clause 6 (Care In submission Of Tenders), Part-I of General Conditions of Contract are revised and shall be read as under:
Tenderers will examine the various provisions of The Central Goods and Service Tax Act, 2017 (CGST)/ Integrated Goods and Service Tax Act, 2017(IGST)/Union Territory Goods and Services Tax Act, 2017 (UTGST)/Respective state's State Goods and Services Tax Act (SGST) also, as notified by Central/State Govt. & as amended from time to time and applicable taxes before bidding. Tenderers will ensure that full benefit of Input Tax Credit (ITC) likely to be availed by them is duly considered while quoting rates.
The successful tenderer who is liable to be registered under CGST/IGST/UTGST/SGST Act shall submit GSTIN along with other details required under CGST/IGST/UTGST/SGST Act to railway immediately after the award of contract, without which no payment shall be released to the contractor. The contractor shall be responsible for deposition of applicable GST to the concerned authority.
In case the successful tenderer is not liable to be registered under CGST/IGST/UTGST/SGST Act, the railway shall deduct the applicable GST from his/their bills under reverse charge mechanism (RCM) and deposit the same to the concerned authority.
Joint venture will be permitted in the tender value more than Rs.10.00 Crs.
Certificate from private individuals/firms for whom such works are executed/being executed shall not be considered.
Before submitting a tender, the tenderer will be deemed to have satisfied himself by actual inspection of the site and locality of the works, that all conditions liable to be encountered during the execution of the works are taken into account and that the rates he enters in the tender forms are adequate and all inclusive to accord with the provisions in Clause-37 of the Standard General Conditions of Contract for the completion of works to the entire satisfaction of the Engineer.
Tenders other than in form of e-Tendering shall not be accepted against this tender. For this purpose, tenderers are required to register themselves with IREPS. Registration requires procurement of Class III Digital Signature Certificate and Digital Encryption Certificate.
The Railway reserves the right to verify all statements, information and documents submitted by the bidder in his tender offer, and the bidder shall, when so required by the Railway, make available all such information, evidence and documents as may be necessary for such verification. Any such verification or lack of such verification by the railway shall not relieve the bidder of its obligations or liabilities hereunder nor will it affect any rights of the railway thereunder.
In case of any wrong information submitted by tender, the contract shall be terminated, Performance Guarantee (PG) and Security Deposit (SD) of contract forfeited, and agency barred for doing business on entire Indian Railways for 5 (five) years.
Any Conditional offer will be summarily rejected.
Tender will be opened at the specified time and date. In case the specified date is declared a holiday, the tender would be opened at the same time on the next working day.
Tenders have been invited for and on behalf of the President of India for the work mentioned as per NIT.
Fabrication, supply & Replacement of steel bridge girder of span of Br No No.126 DN (1x76.2m) at km 137/3-4 between JMK-JGJN section and Br No.157 UP (1x30.5m) at km 175/1-2 between HWX-LKG section.
DCBL082026MLG~NFR
DCBL082026MLG
Open
Works - General
18 Months
Kamrup, Assam
₹0
₹23.4 L
11 Aug 2026
11 Aug 2026
20 Aug 2026
38 items across 1 schedule · ₹5,00,59,491.31 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | All kinds of soils | cum | 2000.00 | 204.99 | 4,09,980 |
| 2 | Ordinary Portland Cement 53 grade of approved brands/makes | MT | 7.00 | 9,099.97 | 63,699.79 |
| 3 | Up to 5.00 Km | MT | 440.00 | 154.84 | 68,129.6 |
| 4 | Above 5 km up to 10 km | MT | 440.00 | 189.81 | 83,516.4 |
| 5 | Above 10 km up to 15 km | MT | 440.00 | 221.42 | 97,424.8 |
| 6 | Above 15 km up to 20 km | MT | 440.00 | 250.69 | 1,10,303.6 |
| 7 | Above 20 km up to 25 km | MT | 440.00 | 278.24 | 1,22,425.6 |
| 8 | Above 25 km up to 30 km | MT | 440.00 | 304.52 | 1,33,988.8 |
| 9 | Above 30 km up to 35 km | MT | 440.00 | 329.81 | 1,45,116.4 |
| 10 | Above 35 km up to 40 km | MT | 440.00 | 354.33 | 1,55,905.2 |
| 11 | Above 40 km up to 60 km | MT | 440.00 | 410.87 | 1,80,782.8 |
| 12 | Above 60 km up to 80 km | MT | 440.00 | 500.47 | 2,20,206.8 |
| 13 | Above 80 km up to 100 km | MT | 440.00 | 588.38 | 2,58,887.2 |
| 14 | Above 100 km up to 150 km | MT | 440.00 | 763.77 | 3,36,058.8 |
| 15 | Above 150 km up to 200 km | MT | 440.00 | 1,016.63 | 4,47,317.2 |
| 16 | Above 200 km | MT-Km | 348000.00 | 5.29 | 18,40,920 |
| 17 | Supplying and fixing HSFG bolts of any dia and any length with suitable nuts including DTI washers conforming to IRS-B1-2001 for bridges and steel structures with contractors labour, tools and plants and lead and lift etc., complete. | Kg | 40000.00 | 292.87 | 1,17,14,800 |
| 18 | On new girder during fabrication | Sqm | 9500.00 | 918.44 | 87,25,180 |
| 19 | Supplying and fixing M.S. Angles 65mmx 65mmx 8mm or any other size conforming to IS:2062 in the nosing of steps of stair cases of Foot Over Bridges including provision of 10mm dia, anchor bar 600mm c/c and fixing with main girder with M.S. flat, making anti- slip arrangements over the top of nosing as per approved scheme given by Engineer in charge with all material, labour, T&P as a complete job. | Kg | 7000.00 | 130.48 | 9,13,360 |
| 20 | With epoxy concrete grouting. | Kg | 350.00 | 168.05 | 58,817.5 |
| 21 | Supplying, Fabricating and fixing access ladders, inspection platforms, Trolley refuges etc., on bridges with structural steel conforming to IS:2062 including welding / bolting, priming painting with one coat of ready mixed paint of Zinc Chromate (IS:104) with DFT of 25-30 microns followed by one coat of Zinc Chrome Red Oxide (IS:2074) with DFT of 25 microns with all material, labour, T&P as a complete job. Note: Painting shall be paid separately under relevant item. | MT | 52.00 | 1,28,263.26 | 66,69,689.52 |
| 22 | Supplying, fitting and fixing in position true to line and level cast steel rocker/roller bearing of different load bearing capacity conforming to IS :7666, IS:9565, IS:1030, IS:919, IS:3073 and IRS Bridge Code including all accessories as per drawing and Technical Specifications with all material, labour, T&P as a complete job. The payment shall be made for the load bearing capacity in Metric Tonne as per approved drawing. | MT | 4140.00 | 649.28 | 26,88,019.2 |
| 23 | Supplying, fitting and fixing in position true to line and level forged steel roller bearing of different load bearing capacity conforming to IS :7666, IS:9565, IS:1030, IS:919, IS:3073 and IRS Bridge Code including all accessories as per drawing and Technical Specifications with all material, labour, T&P as a complete job. The payment shall be made for the load bearing capacity in Metric Tonne as per approved drawing. | MT | 3660.00 | 787.81 | 28,83,384.6 |
| 24 | 50 MT capacity | Day | 25.00 | 38,315.18 | 9,57,879.5 |
| 25 | Epoxy Grout | Kg | 400.00 | 1,750.79 | 7,00,316 |
| 26 | For average lead up to 50m and lift up to 5m | cum | 300.00 | 124.96 | 37,488 |
| 27 | Lifting and packing for regrading the existing PSC sleeper track to required height / level in stages not exceeding 75mm or part thereof at a time, providing permissible ramp for the track, insertion of moorum / sand / stone ballast uniformly under the existing track and placing the same to safe approved gradient, gauge, cushion including levelling and one round of through packing to allow train movement at restricted speed of 30 kmph for a specified length with all leads & lifts and fixing, marking, painting rail level pegs at every 30m interval. Note: Lifting of track shall be done in stages as per procedure prescribed in latest edition of IRPWM to get the proposed final level as per approved working profile, as directed by Engineer in- charge. | TRM | 660.00 | 201.22 | 1,32,805.2 |
| 28 | Extra for additional lift over 75mm for every 50mm lift or part thereof up to 275mm for item nos. 083010 for each TRM. | TRM | 660.00 | 31.2 | 20,592 |
| 29 | When distance of nearest quarry is more than 10 km and up to 20 km | cum | 300.00 | 2,494.9 | 7,48,470 |
| 30 | Linking of track on Girder Bridge with Steel Channel/H-beam sleepers as per approved drawings including leading of running and guard rails, sleepers and fittings, bending of guard rails, notching, drilling of holes, cutting of rails etc. as per IRPWM with latest correction slips and making track structure fit for normal speed. N o t e : 1) Rails, Steel Channel/H-beam sleeper and all fittings will be supplied by Railways. 2)Transportation of track material if supplied beyond 250m of bridge approaches, shall be paid separately under relevant item. | TRM | 500.00 | 662.26 | 3,31,130 |
| 31 | Under Traffic Block Conditions | TRM | 500.00 | 488.94 | 2,44,470 |
| 32 | Fabrication & supply of Galvanized H-beam Sleepers made out of the materials confirming to IS 2062 of standard Rolled sections as per approved drawing Nos RDSO/B/1636/4/R,5&9 complete and as directed by Engineer-in charge. Note: Cost of steel fittings and GRSP shall be paid separately. | MT | 29.00 | 1,57,973.64 | 45,81,235.56 |
| 33 | Anti-Skid Stainless Steel chequered plate conforming to latest IS: 6911, ISS Symbol 409 M, minimum 6mm thick (excluding bead height) with flat bottom and top pattern conforming to IS: 3502, 1A with bead height of minimum 0.8 mm - on New Bridges as per RDSO drawings. | Kg | 7600.00 | 186.55 | 14,17,780 |
| 34 | Manufacture and supply of Hook Bolt 28mm dia. & 320mm long as per RDSO Drg. no. BA- 1636/I/R2 from RDSO approved sources | Kg | 884.92 | 213.3 | 1,88,753.44 |
| 35 | Manufacture & supply of a set of 2 Nos of Elastomeric Pads 25mm / 30mm thick and 4 nos of Grooved rubber pads as per RDSO drawing No. B/1636/5 alt 2 to suit Insulated H Beam sleepers from RDSO approved sources with all contractor's material, lead, lift, labour, tools, plant and transportation etc. complete as per approved drawings and as instructed by Engineer in-charge. Note: One Set consists of 2 nos. Elastomeric Pad 25mm/30mm and 4 nos. Grooved Rubber Pad. | Set | 195.00 | 2,242.12 | 4,37,213.4 |
| 36 | Supplying of Zero toe load fixtures for H Beam sleepers of 52/60Kg Rails procured from RDSO approved firms a s p e r RDSO approved drawing with up-to-date correction slips and specifications with all contractor's lead, lift, labour, tools, plant, transportation etc. complete as per instructions of Engineer in-charge. Note: Complete fixture for 1 sleeper shall constitute 1 set. | Set | 195.00 | 5,774.12 | 11,25,953.4 |
| 37 | Hydra or similar tyre mounted Pick-n-Carry crane of 12T capacity for misc. works of handling of material | Hour | 450.00 | 1,536.98 | 6,91,641 |
| 38 | Supply, filling and stacking of sand bags layer by layer filled with Railway Sand/railway quarry dust in Contractor's empty polythene cement bags of 50 kg bags with all contractors labour, tools, plants, lead, lift etc., including stitching the same with machine using polythene thread complete as directed by Engineer-in charge at site. | Each | 7000.00 | 16.55 | 1,15,850 |
| Schedule total | ₹5,00,59,491.31 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
TDOCDCBL082026MLG.pdf
ATTACHMENT
AnnexuresDCBL082026MLG.pdf Annexures
ATTACHMENT
GCC-2022-ACS6.pdf
ATTACHMENT
GCC Amendments
ATTACHMENT
GCCAmendmentsfromACS-6toACS-11.pdf
ATTACHMENT
AnnexuresDCBL082026MLG.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].