Redevelopment of Sri Kaleshwara Muktheshwara Swamy Temple and Development works in and around the temple, Kaleshwaram (V), Mahadevpur (M), Jayashankar Bhupalpally District, Telangana.

Sri Kaleshwara Muktheswara Swamy Temple (Garbhalayam, Anthralayam, Tritala Vimanam, Anujna Ganapati Koshtam, Mukha Mandapam and Anivotti Mandapam)

Earth work excavation for BUILDING foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means. - Upto 3 M depth.

Filling with useful available earth by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Filling with carted gravel by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Providing post construction anti termite treatment by drilling 1/2 inch dia., holes at the edges of wall floor junction and pouring anti termite chemical (Imidacloprid 30.5 SC, 10.5 ml for 5 Liters of water as per IS 16131.) with a hand operated pressure pump until refusal or to a maximum of one liter per hole. Holes shall be sealed with cement motor after treatment and providing spraying and injecting termiticides for treating and applying to doors, windows, frames, removing, crusting treating in Treatment along outside of foundations (i.e.,Soil in contact with external walls around the building and Concrete or Masonry apron around the building), Treatment of soil under floors - Inside Building, Treatment to voids in masonry, Treatment at points of contact of woodwork, Treatment of Wood Work, Treatment of Electrical Fixtures, as directed in IS 6313 Part 3 2013 with preventive chemicals duly taking precautions for health hazards and safety measures for the occupants including all costs, conveyances of all materials and labour charges,overheads and contractors profit etc complete for finished item of work to the satisfaction of the Engineer-in-Charge. The plinth area of the building each floor shall be taken for the purpose of payment.

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for machine mixing, laying concrete in foundations and under flooring bed, finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Footings

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Pedestals

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Plinth Beams

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS. - Columns - un-supported height of 3.66m - Ground Floor

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. - Grade Slab - 200mm thk

Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal Panther) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) - Ground Floor

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 1 to 20 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 20 to 40 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 40 to 60 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 60 to 80 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 80 to 100 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - above -100 Cft

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR- 4.70)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - GARBHALAYAM &ANTRALAYAM - UPAPEETAM KAPOTHAKAM (SoR-4.713).

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - GARBHALAYAM &ANTRALAYAM - ADHISTANA PADMAJAGATHI IN MUKAPATRAM (SoR-4.715)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - GARBHALAYAM &ANTRALAYAM - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - STHAMBHAVARAGAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - GARBHALAYAM &ANTRALAYAM - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - GARBHALAYAM &ANTRALAYAM - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ARCHES

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - GARBHALAYAM &ANTRALAYAM - SALAHARAM - Chola style (SoR-4.822)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - GARBHALAYAM INNER VARGAMS - UPAPEETAM KAPOTHAKAM (SoR-4.713)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - GARBHALAYAM INNER VARGAMS - ADHISTANA PADMAJAGATHI IN MUKAPATRAM (SoR-4.715)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - GARBHALAYAM INNER VARGAMS - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - STHAMBHAVARAGAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - GARBHALAYAM INNER VARGAMS - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - GARBHALAYAM INNER VARGAMS - ROOF STONES (SoR-4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - 3 STORIED VIMANAM - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - KARNAKOOTAM-1

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - 3 STORIED VIMANAM - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - PRASTARAM-1

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - 3 STORIED VIMANAM - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - KARNAKOOTAM-2

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - 3 STORIED VIMANAM - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - PRASTARAM-2

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - 3 STORIED VIMANAM - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - KANTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - 3 STORIED VIMANAM - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - SHIKARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MAHA MANDAPAM - ALLROUND PEETAM - PADMAJAGATHI (SoR - 4.711)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MAHA MANDAPAM - SMALL PILLARS - CHITRA KANTA STAMBAM (SoR- 4.811)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MAHA MANDAPAM - PODIKA - PUSHPA POTHIKA WITH 4 SIDES (SoR - 4.819)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MAHA MANDAPAM - BEAMS -H - ELUDHAKAM INSIDE BEAMS (SoR - 4.725)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MAHA MANDAPAM - BEAMS -V - ELUDHAKAM INSIDE BEAMS (SoR - 4.725)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MAHA MANDAPAM - ROOF STONES (SoR-4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MAHA MANDAPAM - KODUNGAI - (SoR-4.722)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MAHA MANDAPAM - VYALAM (SoR-4.723)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MAHA MANDAPAM - SALAHARAM - Chola style (SoR-4.822)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MAHA MANDAPAM - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ARCHES

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - HIGH ROOF MANDAPAM - ASWAPADAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - HIGH ROOF MANDAPAM - ANIVETTI PILLARS - SINGLE BALAPADAM (SoR-4.823)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - HIGH ROOF MANDAPAM - PODIKA - PUSHPA POTHIKA WITH 4 SIDES (SoR - 4.819)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - HIGH ROOF MANDAPAM - PILLARS TO PILLAR KAPODAKAM (sOr-4.722)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - HIGH ROOF MANDAPAM - BEAMS -H - ELUDHAKAM INSIDE BEAMS (SoR - 4.725)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - HIGH ROOF MANDAPAM - BEAMS-V - ELUDHAKAM INSIDE BEAMS (SoR - 4.725)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - HIGH ROOF MANDAPAM - ROOF STONES (SoR-4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - HIGH ROOF MANDAPAM - VYALAM (SoR-4.723)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - HIGH ROOF MANDAPAM - KODUNGAI - (SoR-4.722)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - HIGH ROOF MANDAPAM - SALAHARAM - Chola style (SoR-4.822)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - HIGH ROOF MANDAPAM - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ARCHES

Cost of Tool making Material like Chisels, Charcoal for furnace etc., for palmana dressing for Five line Dressing, including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.910)

Labour charged for Jointing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.913)

Supplying and fixing of scaffolding up to 20'0" ht. including cost and conveyance of all materials such as casurina poles, bamboo mats and coir rope etc., including labour charges, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-7.100)

Supply and fixing of metal Sthoopy with Sthoopi dandam, Brahma Randram stone, (Gandhapu Raie) including cost and conveyance of all materials and labour charges all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Copper Sthoopi - Upto 4'-0" Height (16 to 18 gauge) (SoR- 3.23)

Hire charges for a capacity of 80 tonnes Crane, including overheads & contractors profit etc. complete for finished item of work. (for Lifting of Stone material etc.,) (R&B - SoR- Hire Charges for Machinery - sl.no-30 a)

Supply of Hard granite stones of various sizes for Garbhalayam and Ardha Mandapam - Door Frame works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Door Frame above 7'-0" Height (SoR- 4.330)

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. for Door Frames in granite stone - Garbhalayam and Ardha Mandapam (SoR- 4.70)

Door Frames - Dressing - Five Line Palmana instead of fine Dressing and polishing and padmams at top & bottom, Nagabhandam on vertical stones all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam and Ardha Mandapam (SoR- 4.340)

Labour charged for fixing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work - for Door Frames in granite stone - Above 7'-0" to 9'-0" Height

Supply, Preparation & fixing of best Teak Wood Ornamental door shutters with two leaves as per standard temple design includig cost of frame and planks and preparation charges. Fixing of shutters in position, locking arrangements etc., complete. Door shutter with Best Teak Wood frame of 2" thick, Single Padmams of 2.5" thick and Best Teak Wood rare plank of thickness 1.5" - including cost and conveyance of all materials to site, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Material Charges (SoR-5.101)

Supply, Preparation & fixing of best Teak Wood Ornamental door shutters with two leaves as per standard temple design includig cost of frame and planks and preparation charges. Fixing of shutters in position, locking arrangements etc., complete. Door shutter with Best Teak Wood frame of 2" thick, Single Padmams of 2.5" thick and Best Teak Wood rare plank of thickness 1.5" - including cost and conveyance of all materials to site, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Labour Charges (SoR-5.103)

Providing and Carving Stone Vigrahams - (i.e., Poornachitram with Sarvabharanams, Sarvaayavayams, Padadi Kereethantham) as per the drawings approved by the Sthapathi with Fine Dressing, Polishing, Both Sides Finishing, with Jeeva Rekalu including Cost and Conveyance of Suitable Variety of Black Granite Stone, Chisels, Hammers, All Materials, Labour Charges, all operational, incidental charges, overheads and contractor's profit etc., using partly with machine cutting and remaining manual finishing Complete. - Standing Posture with Four Hands above 2'-0" to 4'-0" Height (SoR-4.514)

Supply of Granite stones of various sizes for Cut Stone Flooring works and minimum sizes of flooring 12"x24"x4" as directed by the sthapathi. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , operational, incidental charges, overheads and contractor's profit etc., complete. (SoR - 4.410)

Five line Palmana Dressing for hard granite stone not less than 12"x24" uniform size and thickness not lessthan 4" including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR -4.430)

Labout charges for Jointing for hard granite stone & soft variety including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work.- for Cut Stone Flooring works . (SoR-4.470)

Sri Kaleshwara Muktheswara Swamy Temple (Garbhalayam, Anthralayam, Tritala Vimanam, Anujna Ganapati Koshtam, Mukha Mandapam and Anivotti Mandapam) Total of Rs.

Temple Prakaram Mandapam, Nithya Kalyana Mandapam and Nitya Nivedhana Shala

Earth work excavation and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means. - Upto 3 M depth

Filling with useful available earth by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Filling with carted gravel by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Providing post construction anti termite treatment by drilling 1/2 inch dia., holes at the edges of wall floor junction and pouring anti termite chemical (Imidacloprid 30.5 SC, 10.5 ml for 5 Liters of water as per IS 16131.) with a hand operated pressure pump until refusal or to a maximum of one liter per hole. Holes shall be sealed with cement motor after treatment and providing spraying and injecting termiticides for treating and applying to doors, windows, frames, removing, crusting treating in Treatment along outside of foundations (i.e.,Soil in contact with external walls around the building and Concrete or Masonry apron around the building), Treatment of soil under floors - Inside Building, Treatment to voids in masonry, Treatment at points of contact of woodwork, Treatment of Wood Work, Treatment of Electrical Fixtures, as directed in IS 6313 Part 3 2013 with preventive chemicals duly taking precautions for health hazards and safety measures for the occupants including all costs, conveyances of all materials and labour charges,overheads and contractors profit etc complete for finished item of work to the satisfaction of the Engineer-in-Charge. The plinth area of the building each floor shall be taken for the purpose of payment.

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for machine mixing, laying concrete in foundations and under flooring bed, finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Footings

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. -Plinth Beams

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS. - Columns - un-supported height of 3.66m - Ground Floor

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. - Beams - un-supported height of 3.66m - Ground Floor

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. - Slab - 150mm thk - un-supported height of 3.66m - Ground Floor

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. - Grade Slab - 200mm thk

Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal Panther) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) - Ground Floor

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 1 to 20 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 20 to 40 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 40 to 60 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 80 to 100 Cft

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR- 4.70)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH EAST CORNER - UPAPEETAM KAPOTHAKAM (SoR-4.713)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH EAST CORNER -ADHISTANA PADMAJAGATHI IN MUKAPATRAM (SoR-4.715)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH EAST CORNER - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - STHAMBHAVARAGAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH EAST CORNER - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH EAST CORNER - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ARCHES

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH EAST CORNER - SALAHARAM - Chola style (SoR-4.822)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH EAST CORNER - INSIDE PEETAM -PADMAJAGATHI (SoR - 4.711)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH EAST CORNER - SMALL PILLARS - CHITRA KANTA STAMBAM (SoR- 4.811)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH EAST CORNER - PODIKA - PUSHPA POTHIKA WITH 4 SIDES (SoR - 4.819)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH EAST CORNER - BEAMS - ELUDHAKAM INSIDE BEAMS (SoR - 4.725)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH EAST CORNER - ROOF STONES (SoR-4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH EAST CORNER - KODUNGAI - (SoR-4.722)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH EAST CORNER - VYALAM (SoR-4.723)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH EAST CORNER - SALAHARAM - Chola style (SoR-4.822)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH EAST CORNER - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ARCHES

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH WEST CORNER - UPAPEETAM KAPOTHAKAM (SoR-4.713)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH WEST CORNER - ADHISTANA PADMAJAGATHI IN MUKAPATRAM (SoR-4.715)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH WEST CORNER - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - STHAMBHAVARAGAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH WEST CORNER - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH WEST CORNER - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ARCHES

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH WEST CORNER - SALAHARAM - Chola style (SoR-4.822)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH WEST CORNER -INSIDE PEETAM -PADMAJAGATHI (SoR - 4.711)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH WEST CORNER -SMALL PILLARS - CHITRA KANTA STAMBAM (SoR- 4.811)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH WEST CORNER -PODIKA - PUSHPA POTHIKA WITH 4 SIDES (SoR - 4.819)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH WEST CORNER -BEAMS - ELUDHAKAM INSIDE BEAMS (SoR - 4.725)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH WEST CORNER -ROOF STONES (SoR-4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH WEST CORNER -KODUNGAI - (SoR-4.722)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH WEST CORNER -VYALAM (SoR-4.723)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH WEST CORNER -SALAHARAM - Chola style (SoR-4.822)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH WEST CORNER - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam etc. (SoR-4.720) - ARCHES

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH EAST CORNER - UPAPEETAM KAPOTHAKAM (SoR-4.713)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH EAST CORNER - ADHISTANA PADMAJAGATHI IN MUKAPATRAM (SoR-4.715)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH EAST CORNER - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam etc. (SoR-4.720) - STHAMBHAVARAGAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH EAST CORNER - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam etc. (SoR-4.720) - PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH EAST CORNER - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam etc. (SoR-4.720) - ARCHES

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH EAST CORNER - SALAHARAM - Chola style (SoR-4.822)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH EAST CORNER - INSIDE PEETAM -PADMAJAGATHI (SoR - 4.711)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH EAST CORNER - SMALL PILLARS - CHITRA KANTA STAMBAM (SoR- 4.811)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH EAST CORNER - PODIKA - PUSHPA POTHIKA WITH 4 SIDES (SoR - 4.819)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH EAST CORNER - BEAMS - ELUDHAKAM INSIDE BEAMS (SoR - 4.725)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH EAST CORNER - ROOF STONES (SoR-4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH EAST CORNER - KODUNGAI - (SoR-4.722)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH EAST CORNER - VYALAM (SoR-4.723)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH EAST CORNER - SALAHARAM - Chola style (SoR-4.822)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH EAST CORNER - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam etc. (SoR-4.720) - ARCHES

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH WEST CORNER - UPAPEETAM KAPOTHAKAM (SoR-4.713)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH WEST CORNER - ADHISTANA PADMAJAGATHI IN MUKAPATRAM (SoR-4.715)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH WEST CORNER - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam etc. (SoR-4.720) - STHAMBHAVARAGAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH WEST CORNER - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam etc. (SoR-4.720) - PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH WEST CORNER - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam etc. (SoR-4.720) - ARCHES

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH WEST CORNER - SALAHARAM - Chola style (SoR-4.822)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH WEST CORNER - INSIDE PEETAM -PADMAJAGATHI (SoR - 4.711)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH WEST CORNER - SMALL PILLARS - CHITRA KANTA STAMBAM (SoR- 4.811)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH WEST CORNER - PODIKA - PUSHPA POTHIKA WITH 4 SIDES (SoR - 4.819)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH WEST CORNER - BEAMS - ELUDHAKAM INSIDE BEAMS (SoR - 4.725)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH WEST CORNER - ROOF STONES (SoR-4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH WEST CORNER - KODUNGAI - (SoR-4.722)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH WEST CORNER - VYALAM (SoR-4.723)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH WEST CORNER - SALAHARAM - Chola style (SoR-4.822)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH WEST CORNER - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam etc. (SoR-4.720) - ARCHES

Cost of Tool making Material like Chisels, Charcoal for furnace etc., for palmana dressing for Five line Dressing, including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.910)

Labour charged for Jointing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.913)

Supply of Granite stones of various sizes for Cut Stone Flooring works and minimum sizes of flooring 12"x24"x4" as directed by the sthapathi. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , operational, incidental charges, overheads and contractor's profit etc., complete. (SoR - 4.410)

Five line Palmana Dressing for hard granite stone not less than 12"x24" uniform size and thickness not lessthan 4" including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR -4.430)

Labour charges for Jointing for hard granite stone & soft variety including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work.- for Cut Stone Flooring works . (SoR-4.470)

Supplying and fixing of scaffolding up to 20'0" ht. including cost and conveyance of all materials such as casurina poles, bamboo mats and coir rope etc., including labour charges, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-7.100)

Hire charges for a capacity of 80 tonnes Crane, including overheads & contractors profit etc. complete for finished item of work. (for Lifting of Stone material etc.,) (R&B - SoR- Hire Charges for Machinery - sl.no-30 a)

Providing and Carving Stone Vigrahams - (i.e., Poornachitram with Sarvabharanams, Sarvaayavayams, Padadi Kereethantham) as per the drawings approved by the Sthapathi with Fine Dressing, Polishing, Both Sides Finishing, with Jeeva Rekalu including Cost and Conveyance of Suitable Variety of Black Granite Stone, Chisels, Hammers, All Materials, Labour Charges, all operational, incidental charges, overheads and contractor's profit etc., using partly with machine cutting and remaining manual finishing Complete. - Standing Posture with Four Hands above 2'-0" to 4'-0" Height (SoR-4.514)

Navatala Raja Gopuram at East Side Main Entrance

Earth work excavation and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means. - Upto 3 M depth

Filling with useful available earth by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Filling with carted gravel by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for machine mixing, laying concrete in foundations and under flooring bed, finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Footings

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Pedestals

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. -Plinth Beams

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS. - Columns - Unsupported Height -3.66m - Ground Floor

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. - Grade Slab - 150mm thk

Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal Panther) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) - Ground Floor

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 20 to 40 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 40 to 60 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 60 to 80 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 80 to 100 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - above -100 Cft

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR- 4.70)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - CHITRA VANAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - UPAPEETA UPANAM (SoR-4.713)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - UPAPEETAM KAPOTHAKAM (SoR-4.713)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ADHISTANA PADMAJAGATHI IN MUKAPATRAM (SoR-4.715)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - STHAMBHAVARGAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - INSIDE PEETAM -PADMAJAGATHI (SoR - 4.711)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - BEAMS - ELUDHAKAM INSIDE BEAMS (SoR - 4.725)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ROOF STONES (SoR-4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - PILLARS - CHITRA KANTA STAMBAM (SoR- 4.811)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ABOVE ROOF LEVEL - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - 1 KARNAKOOTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ABOVE ROOF LEVEL - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - 1 PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ABOVE ROOF LEVEL - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - 2 KARNAKOOTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ABOVE ROOF LEVEL - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - 2 PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ABOVE ROOF LEVEL - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - 3 KARNAKOOTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ABOVE ROOF LEVEL - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - 3 PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ABOVE ROOF LEVEL - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - 4 KARNAKOOTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ABOVE ROOF LEVEL - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - 4 PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ABOVE ROOF LEVEL - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - 5 KARNAKOOTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ABOVE ROOF LEVEL - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - 5 PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ABOVE ROOF LEVEL - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - 6 KARNAKOOTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ABOVE ROOF LEVEL - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - 6 PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ABOVE ROOF LEVEL - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - 7 KARNAKOOTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ABOVE ROOF LEVEL - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - 7 PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ABOVE ROOF LEVEL - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - 8 KARNAKOOTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ABOVE ROOF LEVEL - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - 8 PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ABOVE ROOF LEVEL - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - KANTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ABOVE ROOF LEVEL - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - SHIKARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ABOVE ROOF LEVEL - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - MAHANAASI

Cost of Tool making Material like Chisels, Charcoal for furnace etc., for palmana dressing for Five line Dressing, including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.910)

Labour charged for Jointing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.913)

Supplying and fixing of scaffolding up to 20'0" ht. including cost and conveyance of all materials such as casurina poles, bamboo mats and coir rope etc., including labour charges, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-7.100)

Hire charges for a capacity of 80 tonnes Crane, including overheads & contractors profit etc. complete for finished item of work. (for Lifting of Stone material etc.,) (R&B - SoR- Hire Charges for Machinery - sl.no-30 a)

Supply and fixing of metal Sthoopy with Sthoopi dandam, Brahma Randram stone, (Gandhapu Raie) including cost and conveyance of all materials and labour charges all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Copper Sthoopi Upto 5'-0" ht (16 to 18 gauge) (SoR-3.23)

Providing and Carving Stone Vigrahams - (i.e., Poornachitram with Sarvabharanams, Sarvaayavayams, Padadi Kereethantham) as per the drawings approved by the Sthapathi with Fine Dressing, Polishing, Both Sides Finishing, with Jeeva Rekalu including Cost and Conveyance of Suitable Variety of Black Granite Stone, Chisels, Hammers, All Materials, Labour Charges, all operational, incidental charges, overheads and contractor's profit etc., using partly with machine cutting and remaining manual finishing Complete for Standing Posture with Four Hands above 6'-0" Height for Dwarapalakas 1st Storey to 9th Storey (i.e., Poornachitram with Sarvabharanams, Sarvaayavayams, Padadi Kereethantham) (SoR - 4.516)

Supply of Hard granite stones of various sizes for Garbhalayam and Ardha Mandapam - Door Frame works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Door Frame upto 12'-0" to 16'-0" Height. (SoR - 4.400)

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. for Door Frames in granite stone - Garbhalayam and Ardha Mandapam (SoR- 4.70)

Door Frames - Dressing - Five Line Palmana instead of fine Dressing and polishing and padmams at top & bottom, Nagabhandam on vertical stones all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam and Ardha Mandapam (SoR- 4.391)

Labour charged for fixing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work - for Door Frames in granite stone - for Five Storied Rajagopuram (SoR - 4.393)

Supply of Granite stones of various sizes for Cut Stone Flooring works and minimum sizes of flooring 12"x24"x4" as directed by the sthapathi. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , operational, incidental charges, overheads and contractor's profit etc., complete. (SoR - 4.410)

Five line Palmana Dressing for hard granite stone not less than 12"x24" uniform size and thickness not lessthan 4" including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR -4.430)

Labour charges for Jointing for hard granite stone & soft variety including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work.- for Cut Stone Flooring works . (SoR-4.470)

Earth work excavation and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means. - Upto 3 M depth.

Filling with useful available earth by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Filling with carted gravel by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for machine mixing, laying concrete in foundations and under flooring bed, finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Footings

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Pedestals

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. - Grade Slab - 150mm thk

Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal Panther) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) - Ground Floor

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 1 to 20 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 20 to 40 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 40 to 60 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 60 to 80 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 80 to 100 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - above -100 Cft

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR- 4.70)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work.

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - UPAPEETAM KAPOTHAKAM (SoR-4.713)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ADHISTANA PADMAJAGATHI IN MUKAPATRAM (SoR-4.715)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - STHAMBHAVARGAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - INSIDE PEETAM -PADMAJAGATHI (SoR - 4.711)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - INSIDE PILLARS - CHITRA KANTA STAMBAM (SoR- 4.811)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - PODIKAS - PUSHAPOTHIKA WITH 2 SIDES (SoR - 4.817)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - BEAMS - ELUDHAKAM INSIDE BEAMS (SoR - 4.725)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ROOF STONES (SoR-4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - GOPURAM INSIDE

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - 1 KARNA KOOTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - 1 PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - 2 KARNA KOOTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - 2 PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - 3 KARNA KOOTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - 3 PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - 4 KARNA KOOTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - 4 PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - KANTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - SHIKARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - SIDE MAHA NAASI

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - NAASI TALA

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - FRONT AND REAR NAASI GUDU

Cost of Tool making Material like Chisels, Charcoal for furnace etc., for palmana dressing for Five line Dressing, including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.910)

Labour charged for Jointing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.913)

Supplying and fixing of scaffolding up to 20'0" ht. including cost and conveyance of all materials such as casurina poles, bamboo mats and coir rope etc., including labour charges, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-7.100)

Hire charges for a capacity of 80 tonnes Crane, including overheads & contractors profit etc. complete for finished item of work. (for Lifting of Stone material etc.,) (R&B - SoR- Hire Charges for Machinery - sl.no-30 a)

Providing and Carving Stone Vigrahams - (i.e., Poornachitram with Sarvabharanams, Sarvaayavayams, Padadi Kereethantham) as per the drawings approved by the Sthapathi with Fine Dressing, Polishing, Both Sides Finishing, with Jeeva Rekalu including Cost and Conveyance of Suitable Variety of Black Granite Stone, Chisels, Hammers, All Materials, Labour Charges, all operational, incidental charges, overheads and contractor's profit etc., using partly with machine cutting and remaining manual finishing Complete. - Standing Posture with Four Hands above 2'-0" to 4'-0" Height (SoR-4.514)

Supply and fixing of metal Sthoopy with Sthoopi dandam, Brahma Randram stone, (Gandhapu Raie) including cost and conveyance of all materials and labour charges all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Brass STHOOPI Upto 2'-O" ht (16 to 18 gauge) (SoR - 3.110)

Supply of Hard granite stones of various sizes for Garbhalayam and Ardha Mandapam - Door Frame works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Door Frame upto 12'-0" to 16'-0" Height. (SoR - 4.400)

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. for Door Frames in granite stone - Garbhalayam and Ardha Mandapam (SoR- 4.70)

Door Frames - Dressing - Five Line Palmana instead of fine Dressing and polishing and padmams at top & bottom, Nagabhandam on vertical stones all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam and Ardha Mandapam (SoR- 4.391)

Labour charged for fixing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work - for Door Frames in granite stone - for Five Storied Rajagopuram (SoR - 4.393)

Supply of Granite stones of various sizes for Cut Stone Flooring works and minimum sizes of flooring 12"x24"x4" as directed by the sthapathi. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , operational, incidental charges, overheads and contractor's profit etc., complete. (SoR - 4.410)

Five line Palmana Dressing for hard granite stone not less than 12"x24" uniform size and thickness not lessthan 4" including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR -4.430)

Labour charges for Jointing for hard granite stone & soft variety including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work.- for Cut Stone Flooring works . (SoR-4.470)

Earth work excavation and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means. - Upto 3 M depth

Filling with useful available earth by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Filling with carted gravel by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for machine mixing, laying concrete in foundations and under flooring bed, finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Footings

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Pedestals

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. - Grade Slab - 150mm thk

Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal Panther) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) - Ground Floor

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 1 to 20 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 20 to 40 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 40 to 60 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi)- Cost of stone - 60 to 80 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi)- Cost of stone - 80 to 100 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi)- Cost of stone - above -100 Cft

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR- 4.70)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - CHITRA VANAM (SoR -4.710)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - UPAPEETAM KAPOTHAKAM (SoR-4.713)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ADHISTANA PADMAJAGATHI IN MUKAPATRAM (SoR-4.715)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - STHAMBHAVARAGAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ROOF STONES (SoR-4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - INSIDE PEETAM -PADMAJAGATHI (SoR - 4.711)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - KARNAKOOTAM-1

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - ROOF STONES

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - KARNAKOOTAM-2

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - ROOF STONES

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - KANTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - SHIKARAM

Cost of Tool making Material like Chisels, Charcoal for furnace etc., for palmana dressing for Five line Dressing, including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.910)

Labour charged for Jointing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.913)

Supplying and fixing of scaffolding up to 20'0" ht. including cost and conveyance of all materials such as casurina poles, bamboo mats and coir rope etc., including labour charges, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-7.100)

Hire charges for a capacity of 80 tonnes Crane, including overheads & contractors profit etc. complete for finished item of work. (for Lifting of Stone material etc.,) (R&B - SoR- Hire Charges for Machinery - sl.no-30 a)

Providing and Carving Stone Vigrahams - (i.e., Poornachitram with Sarvabharanams, Sarvaayavayams, Padadi Kereethantham) as per the drawings approved by the Sthapathi with Fine Dressing, Polishing, Both Sides Finishing, with Jeeva Rekalu including Cost and Conveyance of Suitable Variety of Black Granite Stone, Chisels, Hammers, All Materials, Labour Charges, all operational, incidental charges, overheads and contractor's profit etc., using partly with machine cutting and remaining manual finishing Complete. - Standing Posture with Four Hands above 2'-0" to 4'-0" Height (SoR-4.514)

Supply and fixing of metal Sthoopy with Sthoopi dandam, Brahma Randram stone, (Gandhapu Raie) including cost and conveyance of all materials and labour charges all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Brass STHOOPI Upto 2'-O" ht (16 to 18 gauge) (SoR - 3.110)

Supply of Hard granite stones of various sizes for Garbhalayam and Ardha Mandapam - Door Frame works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Door Frame upto 9'-0" to 12'-0" Height. (SoR - 4.390)

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. for Door Frames in granite stone - Garbhalayam and Ardha Mandapam (SoR- 4.70)

Door Frames - Dressing - Five Line Palmana instead of fine Dressing and polishing and padmams at top & bottom, Nagabhandam on vertical stones all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work - Three Storied Rajagopuram

Labour charged for fixing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work - for Door Frames in granite stone - Three Storied Rajagopuram (SoR- 4.392)

Supply of Granite stones of various sizes for Cut Stone Flooring works and minimum sizes of flooring 12"x24"x4" as directed by the sthapathi. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , operational, incidental charges, overheads and contractor's profit etc., complete. (SoR - 4.410)

Five line Palmana Dressing for hard granite stone not less than 12"x24" uniform size and thickness not lessthan 4" including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR -4.430)

Labour charges for Jointing for hard granite stone & soft variety including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work.- for Cut Stone Flooring works . (SoR-4.470)

Earth work excavation and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means. - Upto 3 M depth

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for machine mixing, laying concrete in foundations and under flooring bed, finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Pedestal

Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal Panther) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) - Ground Floor

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 60 to 80 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - above -100 Cft

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR- 4.70)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Nandi Peetam-VEDIKA(SoR-4.718)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Dwajam Peetam & Balipeetam

Cost of Tool making Material like Chisels, Charcoal for furnace etc., for palmana dressing for Five line Dressing, including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.910)

Labour charged for Jointing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.913)

Earth work excavation and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means. - Upto 3 M depth

Filling with useful available earth by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Filling with carted gravel by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Providing post construction anti termite treatment by drilling 1/2 inch dia., holes at the edges of wall floor junction and pouring anti termite chemical (Imidacloprid 30.5 SC, 10.5 ml for 5 Liters of water as per IS 16131.) with a hand operated pressure pump until refusal or to a maximum of one liter per hole. Holes shall be sealed with cement motor after treatment and providing spraying and injecting termiticides for treating and applying to doors, windows, frames, removing, crusting treating in Treatment along outside of foundations (i.e.,Soil in contact with external walls around the building and Concrete or Masonry apron around the building), Treatment of soil under floors - Inside Building, Treatment to voids in masonry, Treatment at points of contact of woodwork, Treatment of Wood Work, Treatment of Electrical Fixtures, as directed in IS 6313 Part 3 2013 with preventive chemicals duly taking precautions for health hazards and safety measures for the occupants including all costs, conveyances of all materials and labour charges,overheads and contractors profit etc complete for finished item of work to the satisfaction of the Engineer-in-Charge. The plinth area of the building each floor shall be taken for the purpose of payment.

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for machine mixing, laying concrete in foundations and under flooring bed, finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Footings

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Pedestals

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Plinth Beams

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS. - Columns - un-supported height of 3.66m - Ground Floor

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. - Grade Slab -150mm thk

Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal Panther) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) - Ground Floor

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 1 to 20 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 20 to 40 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 40 to 60 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 60 to 80 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 80 to 100 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - above -100 Cft

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR- 4.70)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ALLROUND PEETAM - PADMAJAGATHI (SoR - 4.711)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - UPAPEETAM KANTAM(SoR-4.715)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work.- ADHISTANAMJAGATHI (PLAIN)(SoR-4.714)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - STHAMBHAVARGAM L-1

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - STHAMBHAVARGAM L-2

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - UTTARAVARGAM-UTTARAM ELUDHAKAM(SoR-4.721)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - KAPODAKAM(SoR-4.722)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - VYALAM(SoR-4.723)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ROOF STONES:-(SoR-4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - KARNAKOOTAM VEDIKA & KANTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - SMALL PRASTARAM & SMALL KANTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ULNATYA KANTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - UTTARA VARHGAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - KAPODAKAM AND VYALAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - VEDIKA AND KANTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - SMALL PRASTARAM & SMALL KANTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ULNATYA KANTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - VEDIKA

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - KANTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - SHIKARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - MAHANAASI AND ALPANAASI

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - CHITRAVANAM ALLROUND PEETAM-PADMA JAGATHI(SoR-4.711)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - PILLARS- CHITRA KANTA STAMBAM (SoR- 4.811)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - BEAMS- ELUDHAKAM INSIDE BEAMS (SoR - 4.725)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - MANDAPAM SPAN ROOF STONES(SoR-4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - KONAVATTAM STONES-(SoR-4.724)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - KODUNGAI (SoR-4.722)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - VYALAM & SALAHARAM chola style(SoR-4.822)

Cost of Tool making Material like Chisels, Charcoal for furnace etc., for palmana dressing for Five line Dressing, including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.910)

Labour charged for Jointing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.913)

Supplying and fixing of Somasutram with yalitala upto 3'6" to 4'6" length (Black granite stone) including fine dressing and polishing to the shape and dimensions as per approved drawings including cost and conveyance of all materials and labour charges etc complete for finished item of work.

Supplying and fixing of Balipeetam upto 1'0" height(Black granite stone) including fine dressing and polishing to the shape and dimensions as per approved drawings including cost and conveyance of all materials and labour charges etc complete for finished item of work.

Supplying and fixing of scaffolding up to 20'0" ht. including cost and conveyance of all materials such as casurina poles, bamboo mats and coir rope etc., including labour charges etc., compete

Supply and fixing of metal Sthoopy with Sthoopi dandam, Brahma Randram stone, (Gandhapu Raie) including cost and conveyance of all materials and labour charges all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Copper Sthoopi - Upto 4'-0" Height (16 to 18 gauge) (SoR- 3.23)

Hire charges for a capacity of 80 tonnes Crane, including overheads & contractors profit etc. complete for finished item of work. (for Lifting of Stone material etc.,) (R&B - SoR- Hire Charges for Machinery - sl.no-30 a)

Supply of Hard granite stones of various sizes for Garbhalayam and Ardha Mandapam - Door Frame works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Door Frame above 7'-0" Height (SoR- 4.330)

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. for Door Frames in granite stone - Garbhalayam and Ardha Mandapam (SoR- 4.70)

Door Frames - Dressing - Five Line Palmana instead of fine Dressing and polishing and padmams at top & bottom, Nagabhandam on vertical stones all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam and Ardha Mandapam (SoR- 4.340)

Labour charged for fixing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work - for Door Frames in granite stone - Above 7'-0" to 9'-0" Height

Supply of Granite stones of various sizes for Cut Stone Flooring works and minimum sizes of flooring 12"x24"x4" as directed by the sthapathi. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , operational, incidental charges, overheads and contractor's profit etc., complete. (SoR - 4.410)

Five line Palmana Dressing for hard granite stone not less than 12"x24" uniform size and thickness not lessthan 4" including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR -4.430)

Labout charges for Jointing for hard granite stone & soft variety including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work.- for Cut Stone Flooring works . (SoR-4.470)

Supply & fixing of best Teak Wood Ornamental door shutters with two leaves as per standard temple design includig cost of frame and planks and preparation charges. Fixing of shutters in position locking arrangements etc., complete. Door shutter with Best Teak Wood frame of 2" thick, Single Padmams of 2.5" thick and Best Teak Wood rare plank of thickness 1.5" - including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work - Material Charges

Supply & fixing of best Teak Wood Ornamental door shutters with two leaves as per standard temple design includig cost of frame and planks and preparation charges. Fixing of shutters in position locking arrangements etc., complete. Door shutter with Best Teak Wood frame of 2" thick, Single Padmams of 2.5" thick and Best Teak Wood rare plank of thickness 1.5" - including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work - Labour Charges

Carving Stone Vigrahams - Standing Posture with Four Hands above 2'-0" to 4'-0" Height (i.e., Poornachitram with Sarvabharanams, Sarvaayavayams, Padadi Kereethantham) as per the drawing approved by the Sthapathi with Fine Dressing, Polishing, Both Sides Finishing, with Jeeva Rekalu including Cost and Conveyance of Suitable Variety of Black Granite Stone, Chisels, Hammers, All Materials, Labour Charges etc,using partly with machine cutting and remaining manual. including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work.(SoR-4.514)

Earth work excavation and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means. - Upto 3 M depth

Filling with useful available earth by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Filling with carted gravel by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Providing post construction anti termite treatment by drilling 1/2 inch dia., holes at the edges of wall floor junction and pouring anti termite chemical (Imidacloprid 30.5 SC, 10.5 ml for 5 Liters of water as per IS 16131.) with a hand operated pressure pump until refusal or to a maximum of one liter per hole. Holes shall be sealed with cement motor after treatment and providing spraying and injecting termiticides for treating and applying to doors, windows, frames, removing, crusting treating in Treatment along outside of foundations (i.e.,Soil in contact with external walls around the building and Concrete or Masonry apron around the building), Treatment of soil under floors - Inside Building, Treatment to voids in masonry, Treatment at points of contact of woodwork, Treatment of Wood Work, Treatment of Electrical Fixtures, as directed in IS 6313 Part 3 2013 with preventive chemicals duly taking precautions for health hazards and safety measures for the occupants including all costs, conveyances of all materials and labour charges,overheads and contractors profit etc complete for finished item of work to the satisfaction of the Engineer-in-Charge. The plinth area of the building each floor shall be taken for the purpose of payment.

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for machine mixing, laying concrete in foundations and under flooring bed, finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Footings

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Pedestals

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Plinth Beams

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS. - Columns - Unsupported Height -3.66m - Ground Floor

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. - Grade Slab -150mm thk

Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal Panther) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) - Ground Floor

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 1 to 20 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 20 to 40 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 40 to 60 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 60 to 80 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - above -100 Cft

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR- 4.70)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - LAYER-1 UPAPEETAM KAPOTHAKAM (SoR-4.713)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - LAYER-2 ADHISTANA JAGATHI PLAIN (SoR-4.714)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - LAYER-3 ADHISTANA KUMUDAKAM (SoR-4.716)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - LAYER-4 ADHISTANA PATTIKA & VEDIKA (SoR-4.717)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - LAYER-5 STHAMBHAVARGAM-1

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - LAYER-6 STHAMBHAVARGAM-2

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - LAYER-7 UTTARAVARGAM (SoR-4.721)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - LAYER-8 KAPODAKAM (SoR-4.722)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - LAYER-9 VYALAM (SoR-4.723)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ROOF STONE S:- KONAVATTAM (SoR-4.724)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - CHATURAVATTAM (SoR-4.724)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - KONAVATTAM (SoR-4.724)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - COVERING STONE-VYALAM (SoR-4.723)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - GARBHALAYAM INSIDE (SoR-4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - GARBHALAYAM STEPS (SoR-4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - LAYER-10 KARNAKOOTA VEDIKA

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - LAYER-11 KARNAKOOTA KANTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - LAYER-12 KARNAKOOTA KAPODAKAM KANTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - LAYER-13 KARNAKOOTA ULNATYAKANTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - LAYER-14 UTTARA VARGAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - LAYER-15 KAPODAKAM & VYALAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - LAYER-16 VEDIKA

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - LAYER-17 KANTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - LAYER-18 ALAMBANAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - LAYER-19 SHIKARAM ALUNGU

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - LAYER-20 MAHAPADMAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - PILLARS - ASWAPADAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - PILLARS - PILLAR- CHITRA KANTA STAMBAM (SoR- 4.811)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - PILLARS - PALIKAPADMAM & KUDAM - CHITRA KANTA STAMBAM (SoR- 4.811)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - PILLARS - PODIKAS L SHAPE-PUSHPODIKA WITH 2 SIDES

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - PILLARS - PODIKAS T SHAPE-PUSHPODIKA WITH 3 SIDES

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - PILLARS - PODIKAS + SHAPE-PUSHPODIKA WITH 4 SIDES

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM UTTARA BEAMS - HORIZONTAL & VERTICAL BEAMS ELUDHAKAM INSIDE BEAMS (SoR - 4.725)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - KODUNGAI - (SoR-4.722)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - VYALAM - (SoR-4.723)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM SALAHARAM:- Chola style (SoR-4.822)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM ROOF STONES:- (SoR-4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MOOSHIKAM PEETAM(SoR-4.718)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - BALIPEETA PEETAM(SoR-4.718)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - DWAJAM PEETAM(SoR-4.718)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - STEPS-(SoR-4.726)

Cost of Tool making Material like Chisels, Charcoal for furnace etc., for palmana dressing for Five line Dressing, including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.910)

Labour charged for Jointing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.913)

Supplying and fixing of Somasutram with yalitala upto 3'6" to 4'6" length (Black granite stone) including fine dressing and polishing to the shape and dimensions as per approved drawings including cost and conveyance of all materials and labour charges etc complete for finished item of work.

Supplying and fixing of Balipeetam upto 1'0" height(Black granite stone) including fine dressing and polishing to the shape and dimensions as per approved drawings including cost and conveyance of all materials and labour charges etc complete for finished item of work.

Supplying and fixing of scaffolding up to 20'0" ht. including cost and conveyance of all materials such as casurina poles, bamboo mats and coir rope etc., including labour charges, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-7.100)

Hire charges for a capacity of 80 tonnes Crane, including overheads & contractors profit etc. complete for finished item of work. (for Lifting of Stone material etc.,) (R&B - SoR- Hire Charges for Machinery - sl.no-30 a)

Supply of Hard granite stones of various sizes for Garbhalayam and Ardha Mandapam - Door Frame works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Door Frame above 7'-0" Height (SoR- 4.330)

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. for Door Frames in granite stone - Garbhalayam and Ardha Mandapam (SoR- 4.70)

Door Frames - Dressing - Five Line Palmana instead of fine Dressing and polishing and padmams at top & bottom, Nagabhandam on vertical stones all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam and Ardha Mandapam (SoR- 4.340)

Labour charged for fixing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work - for Door Frames in granite stone - Above 7'-0" to 9'-0" Height

Supply of Granite stones of various sizes for Cut Stone Flooring works and minimum sizes of flooring 12"x24"x4" as directed by the sthapathi. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , operational, incidental charges, overheads and contractor's profit etc., complete. (SoR - 4.410)

Five line Palmana Dressing for hard granite stone not less than 12"x24" uniform size and thickness not lessthan 4" including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR -4.430)

Labout charges for Jointing for hard granite stone & soft variety including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work.- for Cut Stone Flooring works . (SoR-4.470)

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Pedestals

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. - Grade Slab -150mm thk

Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal Panther) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) - Ground Floor

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 1 to 20 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 20 to 40 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 40 to 60 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 60 to 80 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - above 100 Cft

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR- 4.70)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Grabhalayam - UPAPEETAM KAPOTHAKAM (SoR-4.713)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Grabhalayam - ADHISTANA PADMAJAGATHI IN MUKAPATRAM (SoR-4.715)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Grabhalayam - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - STHAMBHAVARGAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Grabhalayam - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Grabhalayam - ROOF STONES KONAVATTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Grabhalayam - CHATURA VATTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Grabhalayam - COVERING STONE

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Grabhalayam - STEPS

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Grabhalayam - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - 1 KARNAKOOTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Grabhalayam - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - 1 PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Grabhalayam - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - KANTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Grabhalayam - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - SHIKARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - ALLROUND PEETAM - PADMAJAGATHI (SoR - 4.711)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - PILLARS - CHITRA KANTA STAMBAM (SoR- 4.811)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - PODIKAS - PUSHPA POTHIKA WITH 4 SIDES (SoR - 4.819)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - BEAMS HORIZONTAL - ELUDHAKAM INSIDE BEAMS (SoR - 4.725)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - BEAMS VERTICAL - ELUDHAKAM INSIDE BEAMS (SoR - 4.725)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - KODUNGAI - (SoR-4.722)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - VYALAM (SoR-4.723)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - SALAHARAM - Chola style (SoR-4.822)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ARCHES

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - ROOF STONES:- (SoR-4.726)

Cost of Tool making Material like Chisels, Charcoal for furnace etc., for palmana dressing for Five line Dressing, including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.910)

Labour charged for Jointing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.913)

Supplying and fixing of scaffolding up to 20'0" ht. including cost and conveyance of all materials such as casurina poles, bamboo mats and coir rope etc., including labour charges, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-7.100)

Hire charges for a capacity of 80 tonnes Crane, including overheads & contractors profit etc. complete for finished item of work. (for Lifting of Stone material etc.,) (R&B - SoR- Hire Charges for Machinery - sl.no-30 a)

Supply of Hard granite stones of various sizes for Garbhalayam and Ardha Mandapam - Door Frame works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Door Frame above 7'-0" Height (SoR- 4.330)

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. for Door Frames in granite stone - Garbhalayam and Ardha Mandapam (SoR- 4.70)

Door Frames - Dressing - Five Line Palmana instead of fine Dressing and polishing and padmams at top & bottom, Nagabhandam on vertical stones all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam and Ardha Mandapam (SoR- 4.340)

Labour charged for fixing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work - for Door Frames in granite stone - Above 7'-0" to 9'-0" Height

Supply of Granite stones of various sizes for Cut Stone Flooring works and minimum sizes of flooring 12"x24"x4" as directed by the sthapathi. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , operational, incidental charges, overheads and contractor's profit etc., complete. (SoR - 4.410)

Five line Palmana Dressing for hard granite stone not less than 12"x24" uniform size and thickness not lessthan 4" including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR -4.430)

Labout charges for Jointing for hard granite stone & soft variety including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work.- for Cut Stone Flooring works . (SoR-4.470)

Providing and Carving Stone Vigrahams - Standing Posture with Four Hands above 2'-0" to 4'-0" Height (i.e., Poornachitram with Sarvabharanams, Sarvaayavayams, Padadi Kereethantham) as per the drawing approved by the Sthapathi with Fine Dressing, Polishing, both sides finishing with Jeeva rekalu, including cost and conveyance of suitable variety of black granite stone, chisels, hammers, all materials, labour charges etc, using partly with machine cutting and remaining manual finishing complete for finished item of work

Earth work excavation and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means. - Upto 3 M depth

Filling with useful available earth by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Filling with carted gravel by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Providing post construction anti termite treatment by drilling 1/2 inch dia., holes at the edges of wall floor junction and pouring anti termite chemical (Imidacloprid 30.5 SC, 10.5 ml for 5 Liters of water as per IS 16131.) with a hand operated pressure pump until refusal or to a maximum of one liter per hole. Holes shall be sealed with cement motor after treatment and providing spraying and injecting termiticides for treating and applying to doors, windows, frames, removing, crusting treating in Treatment along outside of foundations (i.e.,Soil in contact with external walls around the building and Concrete or Masonry apron around the building), Treatment of soil under floors - Inside Building, Treatment to voids in masonry, Treatment at points of contact of woodwork, Treatment of Wood Work, Treatment of Electrical Fixtures, as directed in IS 6313 Part 3 2013 with preventive chemicals duly taking precautions for health hazards and safety measures for the occupants including all costs, conveyances of all materials and labour charges,overheads and contractors profit etc complete for finished item of work to the satisfaction of the Engineer-in-Charge. The plinth area of the building each floor shall be taken for the purpose of payment.

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for machine mixing, laying concrete in foundations and under flooring bed, finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Footings

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Plinth Beams

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS. - Columns - Unsupported Height -3.66m - Ground Floor

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. - Grade Slab -150mm thk

Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal Panther) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) - Ground Floor

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 1 to 20 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi)- Cost of stone - 20 to 40 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 40 to 60 Cft

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR- 4.70)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ALLROUND PEETAM-VEDIKA(Sor 4.718)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SMALL PILLARS- - CHITRA KANTA STAMBAM (SoR- 4.811)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ASWAPADAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - HIGH ROOF PODIKAS -PUSHPODIKA WITH 2 SIDES

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - LOW ROOF PODIKAS L SHAPE-PUSHPODIKA WITH 2 SIDES

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work.- LOW ROOF PODIKAS T SHAPE-PUSHPODIKA WITH 3 SIDES

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - LOW ROOF PODIKAS + SHAPE-PUSHPODIKA WITH 4 SIDES

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - PILLAR STONE - CHITRA KANTA STAMBAM (SoR- 4.811)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work.- PALIKAPADAMAM - CHITRA KANTA STAMBAM (SoR- 4.811)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - BEAMS-EDULAKAM INSIDE BEAMS(SoR 4.725)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - KODUNGAI STONES (LOW ROOF ) TOP (SoR-4.722)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - KODUNGAI STONES (LOW ROOF ) BOTTOM -VYALAM (SoR-4.723)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - KODUNGAI STONES (HIGH ROOF) TOP (SoR-4.722)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - KODUNGAI STONES (HIGH ROOF) TOP- VYALAM(SoR-4.723)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM ROOF STONES (INCL HIGH ROOF)(SoR-4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - VYALAM(SoR-4.723)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - STEPS

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM PARAPET WALL-PUSHPAPODIKA WITH 1 SIDE(SoR 4.816)

Cost of Tool making Material like Chisels, Charcoal for furnace etc., for palmana dressing for Five line Dressing, including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.910)

Labour charged for Jointing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.913)

Supplying and fixing of scaffolding up to 20'0" ht. including cost and conveyance of all materials such as casurina poles, bamboo mats and coir rope etc., including labour charges, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-7.100)

Hire charges for a capacity of 80 tonnes Crane, including overheads & contractors profit etc. complete for finished item of work. (for Lifting of Stone material etc.,) (R&B - SoR- Hire Charges for Machinery - sl.no-30 a)

Supply of Granite stones of various sizes for Cut Stone Flooring works and minimum sizes of flooring 12"x24"x4" as directed by the sthapathi. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , operational, incidental charges, overheads and contractor's profit etc., complete. (SoR - 4.410)

Five line Palmana Dressing for hard granite stone not less than 12"x24" uniform size and thickness not lessthan 4" including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR -4.430)

Labout charges for Jointing for hard granite stone & soft variety including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work.- for Cut Stone Flooring works . (SoR-4.470)

Earth work excavation and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means. - Upto 3 M depth

Filling with useful available earth by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Filling with carted gravel by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for machine mixing, laying concrete in foundations and under flooring bed, finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Footings

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Plinth Beams

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS. - Columns - un-supported height of 3.66m - Ground Floor

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. - Grade Slab -150mm thk

Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal Panther) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) - Ground Floor

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 40 to 60 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 60 to 80 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - above -100 Cft

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR- 4.70)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - UPAPEETAM KAPOTHAKAM (SoR-4.713)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - PILLARS- CHITRA KANTA STAMBAM (SoR- 4.811)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - PODIKA-PUSHPODIKA WITH 4 SIDES (SoR-4.819)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work.- UTTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - PADMA SHIKARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work.- ROOF STONES(SoR 4.726)

Cost of Tool making Material like Chisels, Charcoal for furnace etc., for palmana dressing for Five line Dressing, including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.910)

Labour charged for Jointing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.913)

Supplying and fixing of scaffolding up to 20'0" ht. including cost and conveyance of all materials such as casurina poles, bamboo mats and coir rope etc., including labour charges, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-7.100)

Hire charges for a capacity of 80 tonnes Crane, including overheads & contractors profit etc. complete for finished item of work. (for Lifting of Stone material etc.,) (R&B - SoR- Hire Charges for Machinery - sl.no-30 a)

Supply and fixing of metal Sthoopy with Sthoopi dandam, Brahma Randram stone, (Gandhapu Raie) including cost and conveyance of all materials and labour charges all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Copper Sthoopi - Upto 2'-0" Height (18 to 20 gauge) (SoR- 3.11)

Supply of Granite stones of various sizes for Cut Stone Flooring works and minimum sizes of flooring 12"x24"x4" as directed by the sthapathi. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , operational, incidental charges, overheads and contractor's profit etc., complete. (SoR - 4.410)

Five line Palmana Dressing for hard granite stone not less than 12"x24" uniform size and thickness not lessthan 4" including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR -4.430)

Labout charges for Jointing for hard granite stone & soft variety including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work.- for Cut Stone Flooring works . (SoR-4.470)

Earth work excavation and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means. - Upto 3 M depth

Filling with useful available earth by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Filling with carted gravel by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Providing post construction anti termite treatment by drilling 1/2 inch dia., holes at the edges of wall floor junction and pouring anti termite chemical (Imidacloprid 30.5 SC, 10.5 ml for 5 Liters of water as per IS 16131.) with a hand operated pressure pump until refusal or to a maximum of one liter per hole. Holes shall be sealed with cement motor after treatment and providing spraying and injecting termiticides for treating and applying to doors, windows, frames, removing, crusting treating in Treatment along outside of foundations (i.e.,Soil in contact with external walls around the building and Concrete or Masonry apron around the building), Treatment of soil under floors - Inside Building, Treatment to voids in masonry, Treatment at points of contact of woodwork, Treatment of Wood Work, Treatment of Electrical Fixtures, as directed in IS 6313 Part 3 2013 with preventive chemicals duly taking precautions for health hazards and safety measures for the occupants including all costs, conveyances of all materials and labour charges,overheads and contractors profit etc complete for finished item of work to the satisfaction of the Engineer-in-Charge. The plinth area of the building each floor shall be taken for the purpose of payment.

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for machine mixing, laying concrete in foundations and under flooring bed, finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Footings

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Pedestals

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Plinth Beams

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS. - Columns - un-supported height of 3.66m - Ground Floor

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. - Grade Slab -150mm thk

Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal Panther) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) - Ground Floor

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 1 to 20 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 20 to 40 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 40 to 60 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 60 to 80 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - above -100 Cft

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR- 4.70)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam - UPAPEETAM KAPOTHAKAM (SoR-4.713)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam - ADHISTANA PADMAJAGATHI IN MUKAPATRAM (SoR-4.715)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - STHAMBHAVARGAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam - ROOF STONES (SoR-4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam - CHATURA VATTAM (SoR-4.724)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam - COVERING STONE

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam - STEPS

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - 1 KARNAKOOTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - 1 PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - KANTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - SHIKARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Mandapam - ALLROUND PEETAM - PADMAJAGATHI (SoR - 4.711)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Mandapam - SMALL PILLARS - CHITRA KANTA STAMBAM (SoR- 4.811)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Mandapam - PODIKA - PUSHPA POTHIKA WITH 4 SIDES (SoR - 4.819)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Mandapam - BEAMS -H - ELUDHAKAM INSIDE BEAMS (SoR - 4.725)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Mandapam - BEAMS-V - ELUDHAKAM INSIDE BEAMS (SoR - 4.725)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Mandapam - KODUNGAI - (SoR-4.722)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Mandapam - VYALAM (SoR-4.723)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Mandapam - SALAHARAM - Chola style (SoR-4.822)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - Mandapam - ARCHES

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ROOF STONES (SoR-4.726)

Cost of Tool making Material like Chisels, Charcoal for furnace etc., for palmana dressing for Five line Dressing, including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.910)

Labour charged for Jointing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.913)

Supplying and fixing of scaffolding up to 20'0" ht. including cost and conveyance of all materials such as casurina poles, bamboo mats and coir rope etc., including labour charges, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-7.100)

Hire charges for a capacity of 80 tonnes Crane, including overheads & contractors profit etc. complete for finished item of work. (for Lifting of Stone material etc.,) (R&B - SoR- Hire Charges for Machinery - sl.no-30 a)

Supply of Hard granite stones of various sizes for Garbhalayam and Ardha Mandapam - Door Frame works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Door Frame above 7'-0" Height (SoR- 4.330)

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. for Door Frames in granite stone - Garbhalayam and Ardha Mandapam (SoR- 4.70)

Door Frames - Dressing - Five Line Palmana instead of fine Dressing and polishing and padmams at top & bottom, Nagabhandam on vertical stones all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam and Ardha Mandapam (SoR- 4.340)

Labour charged for fixing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work - for Door Frames in granite stone - Above 7'-0" to 9'-0" Height

Supply of Granite stones of various sizes for Cut Stone Flooring works and minimum sizes of flooring 12"x24"x4" as directed by the sthapathi. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , operational, incidental charges, overheads and contractor's profit etc., complete. (SoR - 4.410)

Five line Palmana Dressing for hard granite stone not less than 12"x24" uniform size and thickness not lessthan 4" including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR -4.430)

Labout charges for Jointing for hard granite stone & soft variety including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work.- for Cut Stone Flooring works . (SoR-4.470)

Providing and Carving Stone Vigrahams - (i.e., Poornachitram with Sarvabharanams, Sarvaayavayams, Padadi Kereethantham) as per the drawings approved by the Sthapathi with Fine Dressing, Polishing, Both Sides Finishing, with Jeeva Rekalu including Cost and Conveyance of Suitable Variety of Black Granite Stone, Chisels, Hammers, All Materials, Labour Charges, all operational, incidental charges, overheads and contractor's profit etc., using partly with machine cutting and remaining manual finishing Complete. - Standing Posture with Four Hands above 2'-0" to 4'-0" Height (SoR-4.514)

Earth work excavation and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means. - Upto 3 M depth

Filling with useful available earth by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Filling with carted gravel by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Providing post construction anti termite treatment by drilling 1/2 inch dia., holes at the edges of wall floor junction and pouring anti termite chemical (Imidacloprid 30.5 SC, 10.5 ml for 5 Liters of water as per IS 16131.) with a hand operated pressure pump until refusal or to a maximum of one liter per hole. Holes shall be sealed with cement motor after treatment and providing spraying and injecting termiticides for treating and applying to doors, windows, frames, removing, crusting treating in Treatment along outside of foundations (i.e.,Soil in contact with external walls around the building and Concrete or Masonry apron around the building), Treatment of soil under floors - Inside Building, Treatment to voids in masonry, Treatment at points of contact of woodwork, Treatment of Wood Work, Treatment of Electrical Fixtures, as directed in IS 6313 Part 3 2013 with preventive chemicals duly taking precautions for health hazards and safety measures for the occupants including all costs, conveyances of all materials and labour charges,overheads and contractors profit etc complete for finished item of work to the satisfaction of the Engineer-in-Charge. The plinth area of the building each floor shall be taken for the purpose of payment.

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for machine mixing, laying concrete in foundations and under flooring bed, finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps.- Footings

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Plinth Beams

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS. - Columns - un-supported height of 3.66m - Ground Floor

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. - Grade Slab - 150mm thk

Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal Panther) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) - Ground Floor

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 1 to 20 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 20 to 40 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 40 to 60 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi)- Cost of stone - 60 to 80 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi)- Cost of stone - 80 to 100 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - Above 100 Cft

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR- 4.70)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. -MANDAPAM - CHITRAVANAM- (Sor- 4.710)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. -MANDAPAM - ALLROUND PEETAM - PADMAJAGATHI (SoR - 4.711)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. -MANDAPAM - INSIDE (SoR - 4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. -MANDAPAM - INSIDE PLANE PEETAM-PADMAJAGATHI (SoR - 4.711)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. -MANDAPAM - SMALL PILLARS - CHITRA KANTA STAMBAM (SoR- 4.811)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. -MANDAPAM - PODIKA - PUSHPA POTHIKA WITH 4 SIDES (SoR - 4.819)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. -MANDAPAM - BEAMS-ELUDHAKAM INSIDE BEAMS (SoR - 4.725)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. -MANDAPAM - ROOF STONES (SoR-4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. -MANDAPAM - KONAVATTAM STONES (SoR- 4.724)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. -MANDAPAM - CHADURAVATTAM (SoR- 4.724)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. -MANDAPAM - ROOF STONES (SoR-4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. -MANDAPAM - KODUNGAI (SoR-4.722)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. -MANDAPAM - VYALAM (SoR-4.723)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. -MANDAPAM - SALAHARAM - Chola style (SoR-4.822)

Cost of Tool making Material like Chisels, Charcoal for furnace etc., for palmana dressing for Five line Dressing, including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.910)

Labour charged for Jointing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.913)

Supply of Granite stones of various sizes for Cut Stone Flooring works and minimum sizes of flooring 12"x24"x4" as directed by the sthapathi. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , operational, incidental charges, overheads and contractor's profit etc., complete. (SoR - 4.410)

Five line Palmana Dressing for hard granite stone not less than 12"x24" uniform size and thickness not lessthan 4" including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR -4.430)

Labout charges for Jointing for hard granite stone & soft variety including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work.- for Cut Stone Flooring works . (SoR-4.470)

Supplying and fixing of scaffolding up to 20'0" ht. including cost and conveyance of all materials such as casurina poles, bamboo mats and coir rope etc., including labour charges, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-7.100)

Hire charges for a capacity of 80 tonnes Crane, including overheads & contractors profit etc. complete for finished item of work. (for Lifting of Stone material etc.,) (R&B - SoR- Hire Charges for Machinery - sl.no-30 a)

Earth work excavation and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means. - Upto 3 M depth

Filling with useful available earth by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Filling with carted gravel by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for machine mixing, laying concrete in foundations and under flooring bed, finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Footings

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Plinth Beams

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS. - Columns - un-supported height of 3.66m - Ground Floor

Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal Panther) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) - Ground Floor

Earth work excavation and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means. - Upto 3 M depth

Filling with useful available earth by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for machine mixing, laying concrete in foundations and under flooring bed, finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Footings

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS. - RCC walls 375mm thk - un-supported height of 3.66m - Ground Floor

Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal Panther) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) - Ground Floor

Supply of Granite stones of various sizes for Cut Stone Flooring works and minimum sizes of flooring 12"x24"x4" as directed by the sthapathi. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , operational, incidental charges, overheads and contractor's profit etc., complete. (SoR - 4.410)

Five line Palmana Dressing for hard granite stone not less than 12"x24" uniform size and thickness not lessthan 4" including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR -4.430)

Labout charges for Jointing for hard granite stone & soft variety including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work.- for Cut Stone Flooring works . (SoR-4.470)

Earth work excavation and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means. - Upto 3 M depth

Filling with useful available earth by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Filling with carted gravel by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for machine mixing, laying concrete in foundations and under flooring bed, finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Footings

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Plinth Beams

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS.- Columns - un-supported height of 3.66m - Ground Floor

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. - Grade Slab -150mm thk

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. - Beams - un-supported height of 3.66m - Ground Floor

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. - Slab - 150mm thk - un-supported height of 3.66m - Ground Floor

Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal Panther) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) - Ground Floor

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 20 to 40 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 40 to 60 Cft

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR- 4.70)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ALLROUND PEETAM - PADMAJAGATHI (SoR - 4.711)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SMALL PILLARS - CHITRA KANTA STAMBAM (SoR- 4.811)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - PODIKA - PUSHPA POTHIKA WITH 4 SIDES (SoR - 4.819)

Cost of Tool making Material like Chisels, Charcoal for furnace etc., for palmana dressing for Five line Dressing, including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.910)

Labour charged for Jointing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.913)

Supplying and fixing of scaffolding up to 20'0" ht. including cost and conveyance of all materials such as casurina poles, bamboo mats and coir rope etc., including labour charges, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-7.100)

Hire charges for a capacity of 80 tonnes Crane, including overheads & contractors profit etc. complete for finished item of work. (for Lifting of Stone material etc.,) (R&B - SoR- Hire Charges for Machinery - sl.no-30 a)

S&F premium make CPVC Pipes - SDR13.5, including the cost of pipe & its fittings & labour charges complete including cost and conveyance of all materials to site, all operational, incidental, labour charges, cost of overheads & contractor profit etc.complete for finished item of work as directed by Engineer-in-charge - 28.60mm OD Pipe - SDR 13.5

S&F premium make CPVC Pipes - SDR13.5, including the cost of pipe & its fittings & labour charges complete including cost and conveyance of all materials to site, all operational, incidental, labour charges, cost of overheads & contractor profit etc.complete for finished item of work as directed by Engineer-in-charge - 34.90mm OD Pipe - SDR 13.5

Supplying, laying and jointing Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete, with necessary excavation in all types of soils (except rock requiring blasting) refilling and making good the walls and floors to the original surface, fixing M.S. clamps and T.W. block on walls wherever required, including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit, etc. complete for finished item of work as directed by Engineer-in-charge. - 50 mm Nominal Bore

S & F 65 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 with GI fittings such as elbows tees couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for GI bends union and GI connectors with checkout and socket Tata or Zenith make or equivalent, with necessary excavation in all types of soils (except rock requiring blasting) refilling and making good the walls and floors to the original surface, fixing M.S. clamps and T.W. block on walls wherever required, including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit, etc. complete for finished item of work as directed by Engineer-in-charge. - 65 mm Nominal Bore

S & F Bronze Gate/ Globe valve as per IS - 778 Class - I,Indian make heavy type as approved by the Engineerin-charge including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit, etc. complete for finished item of work in all floors as directed by Engineer-in-charge. - 50 mm dia

S&F of 15 mm brass body CP finish long body bib tap of not less than 400 grams weight with quarter turn spindle internal / external threaded connection conforming to IS 8931, including cost and conveyance of all materials to site, all operational, incidental, labour charges, overheads and contractor's profit, etc. complete for finished item of work.

Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks, including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit etc. complete for finished item of work.

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes Pipe with Spigot & Pin Type with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete, including all incidental, labour charges, overheads and contractor's profit, etc. complete for finished item of work. - NP-2 Class 150mm dia pipe

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes Pipe with Spigot & Pin Type with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete, including all incidental, labour charges, overheads and contractor's profit, etc. complete for finished item of work. - NP-2 Class 200mm dia pipe

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes Pipe with Spigot & Pin Type with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete, including all incidental, labour charges, overheads and contractor's profit, etc. complete for finished item of work. - NP-2 Class 250mm dia pipe

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes Pipe with Spigot & Pin Type with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete, including all incidental, labour charges, overheads and contractor's profit, etc. complete for finished item of work. - NP-2 Class 300mm dia pipe

Earth work excavation and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means. - Upto 3 M depth

Filling with useful available earth by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for machine mixing, laying concrete in foundations and under flooring bed, finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING

Vibrated reinforced cement concrete M 20 grade concrete using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) including cost, (excluding seigniorage) conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per MoRT&H specification 1500,1600,1700 & 2200 (5th revision ) and as directed by the Engineer-in-Charge for foundation and side walls.

Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal Panther) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126)

Supplying and fixing of MS Grills over Storm water drain including fabrication and erection in position using MS angles/flats etc., including cost and conveyance of all materials to work site, all operational, incidental Labour charges for fabrication, cost of welding rods, power charges, cost of fixing in position, overheads & contractors profit etc., complete for finished item of work.

Painting to new iron works with 2 coats of Synthetic Enamel paints in all shades using ready mixed Synthetic Enamel in all shades Grade - I / Polyurethane full gloss Enamel (IS - 13213) paints having VOC (Volatile Organic Compound) content less than 30 grams/ Lit. over 1 coat of Red Oxide Primer Paint for iron works of Grade -1 of approved brand to give an even shade after thoroughly cleaning and sand papering the surface to remove all dirt and remains , including cost and conveyance of all materials to work site including cost of primer coat and all operational, incidental, labour charges etc. complete etc., complete including cost of overheads & contractors profit (APSS No.1200, 1207 & 1211) in all floors.

Total number of items ( 333) Three hundred and thirty three only

Earth work excavation for BUILDING foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means. - Upto 3 M depth.

Filling with useful available earth by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Filling with carted gravel by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Providing post construction anti termite treatment by drilling 1/2 inch dia., holes at the edges of wall floor junction and pouring anti termite chemical (Imidacloprid 30.5 SC, 10.5 ml for 5 Liters of water as per IS 16131.) with a hand operated pressure pump until refusal or to a maximum of one liter per hole. Holes shall be sealed with cement motor after treatment and providing spraying and injecting termiticides for treating and applying to doors, windows, frames, removing, crusting treating in Treatment along outside of foundations (i.e.,Soil in contact with external walls around the building and Concrete or Masonry apron around the building), Treatment of soil under floors - Inside Building, Treatment to voids in masonry, Treatment at points of contact of woodwork, Treatment of Wood Work, Treatment of Electrical Fixtures, as directed in IS 6313 Part 3 2013 with preventive chemicals duly taking precautions for health hazards and safety measures for the occupants including all costs, conveyances of all materials and labour charges,overheads and contractors profit etc complete for finished item of work to the satisfaction of the Engineer-in-Charge. The plinth area of the building each floor shall be taken for the purpose of payment.

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for machine mixing, laying concrete in foundations and under flooring bed, finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Footings

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Pedestals

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Plinth Beams

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS. - Columns - un-supported height of 3.66m - Ground Floor

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. - Grade Slab - 200mm thk

Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal Panther) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) - Ground Floor

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 1 to 20 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 20 to 40 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 40 to 60 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 60 to 80 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 80 to 100 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - above -100 Cft

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR- 4.70)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - GARBHALAYAM &ANTRALAYAM - UPAPEETAM KAPOTHAKAM (SoR-4.713).

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - GARBHALAYAM &ANTRALAYAM - ADHISTANA PADMAJAGATHI IN MUKAPATRAM (SoR-4.715)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - GARBHALAYAM &ANTRALAYAM - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - STHAMBHAVARAGAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - GARBHALAYAM &ANTRALAYAM - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - GARBHALAYAM &ANTRALAYAM - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ARCHES

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - GARBHALAYAM &ANTRALAYAM - SALAHARAM - Chola style (SoR-4.822)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - GARBHALAYAM INNER VARGAMS - UPAPEETAM KAPOTHAKAM (SoR-4.713)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - GARBHALAYAM INNER VARGAMS - ADHISTANA PADMAJAGATHI IN MUKAPATRAM (SoR-4.715)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - GARBHALAYAM INNER VARGAMS - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - STHAMBHAVARAGAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - GARBHALAYAM INNER VARGAMS - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - GARBHALAYAM INNER VARGAMS - ROOF STONES (SoR-4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - 3 STORIED VIMANAM - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - KARNAKOOTAM-1

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - 3 STORIED VIMANAM - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - PRASTARAM-1

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - 3 STORIED VIMANAM - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - KARNAKOOTAM-2

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - 3 STORIED VIMANAM - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - PRASTARAM-2

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - 3 STORIED VIMANAM - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - KANTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - 3 STORIED VIMANAM - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - SHIKARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MAHA MANDAPAM - ALLROUND PEETAM - PADMAJAGATHI (SoR - 4.711)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MAHA MANDAPAM - SMALL PILLARS - CHITRA KANTA STAMBAM (SoR- 4.811)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MAHA MANDAPAM - PODIKA - PUSHPA POTHIKA WITH 4 SIDES (SoR - 4.819)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MAHA MANDAPAM - BEAMS -H - ELUDHAKAM INSIDE BEAMS (SoR - 4.725)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MAHA MANDAPAM - BEAMS -V - ELUDHAKAM INSIDE BEAMS (SoR - 4.725)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MAHA MANDAPAM - ROOF STONES (SoR-4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MAHA MANDAPAM - KODUNGAI - (SoR-4.722)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MAHA MANDAPAM - VYALAM (SoR-4.723)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MAHA MANDAPAM - SALAHARAM - Chola style (SoR-4.822)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MAHA MANDAPAM - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ARCHES

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - HIGH ROOF MANDAPAM - ASWAPADAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - HIGH ROOF MANDAPAM - ANIVETTI PILLARS - SINGLE BALAPADAM (SoR-4.823)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - HIGH ROOF MANDAPAM - PODIKA - PUSHPA POTHIKA WITH 4 SIDES (SoR - 4.819)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - HIGH ROOF MANDAPAM - PILLARS TO PILLAR KAPODAKAM (sOr-4.722)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - HIGH ROOF MANDAPAM - BEAMS -H - ELUDHAKAM INSIDE BEAMS (SoR - 4.725)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - HIGH ROOF MANDAPAM - BEAMS-V - ELUDHAKAM INSIDE BEAMS (SoR - 4.725)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - HIGH ROOF MANDAPAM - ROOF STONES (SoR-4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - HIGH ROOF MANDAPAM - VYALAM (SoR-4.723)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - HIGH ROOF MANDAPAM - KODUNGAI - (SoR-4.722)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - HIGH ROOF MANDAPAM - SALAHARAM - Chola style (SoR-4.822)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - HIGH ROOF MANDAPAM - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ARCHES

Cost of Tool making Material like Chisels, Charcoal for furnace etc., for palmana dressing for Five line Dressing, including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.910)

Labour charged for Jointing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.913)

Supplying and fixing of scaffolding up to 20'0" ht. including cost and conveyance of all materials such as casurina poles, bamboo mats and coir rope etc., including labour charges, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-7.100)

Supply and fixing of metal Sthoopy with Sthoopi dandam, Brahma Randram stone, (Gandhapu Raie) including cost and conveyance of all materials and labour charges all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Copper Sthoopi - Upto 4'-0" Height (16 to 18 gauge) (SoR- 3.23)

Hire charges for a capacity of 80 tonnes Crane, including overheads & contractors profit etc. complete for finished item of work. (for Lifting of Stone material etc.,) (R&B - SoR- Hire Charges for Machinery - sl.no-30 a)

Supply of Hard granite stones of various sizes for Garbhalayam and Ardha Mandapam - Door Frame works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Door Frame above 7'-0" Height (SoR- 4.330)

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. for Door Frames in granite stone - Garbhalayam and Ardha Mandapam (SoR- 4.70)

Door Frames - Dressing - Five Line Palmana instead of fine Dressing and polishing and padmams at top & bottom, Nagabhandam on vertical stones all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam and Ardha Mandapam (SoR- 4.340)

Labour charged for fixing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work - for Door Frames in granite stone - Above 7'-0" to 9'-0" Height

Supply, Preparation & fixing of best Teak Wood Ornamental door shutters with two leaves as per standard temple design includig cost of frame and planks and preparation charges. Fixing of shutters in position, locking arrangements etc., complete. Door shutter with Best Teak Wood frame of 2" thick, Single Padmams of 2.5" thick and Best Teak Wood rare plank of thickness 1.5" - including cost and conveyance of all materials to site, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Material Charges (SoR-5.101)

Supply, Preparation & fixing of best Teak Wood Ornamental door shutters with two leaves as per standard temple design includig cost of frame and planks and preparation charges. Fixing of shutters in position, locking arrangements etc., complete. Door shutter with Best Teak Wood frame of 2" thick, Single Padmams of 2.5" thick and Best Teak Wood rare plank of thickness 1.5" - including cost and conveyance of all materials to site, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Labour Charges (SoR-5.103)

Providing and Carving Stone Vigrahams - (i.e., Poornachitram with Sarvabharanams, Sarvaayavayams, Padadi Kereethantham) as per the drawings approved by the Sthapathi with Fine Dressing, Polishing, Both Sides Finishing, with Jeeva Rekalu including Cost and Conveyance of Suitable Variety of Black Granite Stone, Chisels, Hammers, All Materials, Labour Charges, all operational, incidental charges, overheads and contractor's profit etc., using partly with machine cutting and remaining manual finishing Complete. - Standing Posture with Four Hands above 2'-0" to 4'-0" Height (SoR-4.514)

Supply of Granite stones of various sizes for Cut Stone Flooring works and minimum sizes of flooring 12"x24"x4" as directed by the sthapathi. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , operational, incidental charges, overheads and contractor's profit etc., complete. (SoR - 4.410)

Five line Palmana Dressing for hard granite stone not less than 12"x24" uniform size and thickness not lessthan 4" including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR -4.430)

Labout charges for Jointing for hard granite stone & soft variety including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work.- for Cut Stone Flooring works . (SoR-4.470)

Earth work excavation and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means. - Upto 3 M depth

Filling with useful available earth by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Filling with carted gravel by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Providing post construction anti termite treatment by drilling 1/2 inch dia., holes at the edges of wall floor junction and pouring anti termite chemical (Imidacloprid 30.5 SC, 10.5 ml for 5 Liters of water as per IS 16131.) with a hand operated pressure pump until refusal or to a maximum of one liter per hole. Holes shall be sealed with cement motor after treatment and providing spraying and injecting termiticides for treating and applying to doors, windows, frames, removing, crusting treating in Treatment along outside of foundations (i.e.,Soil in contact with external walls around the building and Concrete or Masonry apron around the building), Treatment of soil under floors - Inside Building, Treatment to voids in masonry, Treatment at points of contact of woodwork, Treatment of Wood Work, Treatment of Electrical Fixtures, as directed in IS 6313 Part 3 2013 with preventive chemicals duly taking precautions for health hazards and safety measures for the occupants including all costs, conveyances of all materials and labour charges,overheads and contractors profit etc complete for finished item of work to the satisfaction of the Engineer-in-Charge. The plinth area of the building each floor shall be taken for the purpose of payment.

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for machine mixing, laying concrete in foundations and under flooring bed, finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Footings

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. -Plinth Beams

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS. - Columns - un-supported height of 3.66m - Ground Floor

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. - Beams - un-supported height of 3.66m - Ground Floor

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. - Slab - 150mm thk - un-supported height of 3.66m - Ground Floor

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. - Grade Slab - 200mm thk

Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal Panther) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) - Ground Floor

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 1 to 20 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 20 to 40 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 40 to 60 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 80 to 100 Cft

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR- 4.70)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH EAST CORNER - UPAPEETAM KAPOTHAKAM (SoR-4.713)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH EAST CORNER -ADHISTANA PADMAJAGATHI IN MUKAPATRAM (SoR-4.715)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH EAST CORNER - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - STHAMBHAVARAGAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH EAST CORNER - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH EAST CORNER - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ARCHES

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH EAST CORNER - SALAHARAM - Chola style (SoR-4.822)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH EAST CORNER - INSIDE PEETAM -PADMAJAGATHI (SoR - 4.711)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH EAST CORNER - SMALL PILLARS - CHITRA KANTA STAMBAM (SoR- 4.811)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH EAST CORNER - PODIKA - PUSHPA POTHIKA WITH 4 SIDES (SoR - 4.819)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH EAST CORNER - BEAMS - ELUDHAKAM INSIDE BEAMS (SoR - 4.725)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH EAST CORNER - ROOF STONES (SoR-4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH EAST CORNER - KODUNGAI - (SoR-4.722)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH EAST CORNER - VYALAM (SoR-4.723)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH EAST CORNER - SALAHARAM - Chola style (SoR-4.822)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH EAST CORNER - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ARCHES

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH WEST CORNER - UPAPEETAM KAPOTHAKAM (SoR-4.713)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH WEST CORNER - ADHISTANA PADMAJAGATHI IN MUKAPATRAM (SoR-4.715)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH WEST CORNER - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - STHAMBHAVARAGAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH WEST CORNER - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH WEST CORNER - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ARCHES

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH WEST CORNER - SALAHARAM - Chola style (SoR-4.822)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH WEST CORNER -INSIDE PEETAM -PADMAJAGATHI (SoR - 4.711)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH WEST CORNER -SMALL PILLARS - CHITRA KANTA STAMBAM (SoR- 4.811)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH WEST CORNER -PODIKA - PUSHPA POTHIKA WITH 4 SIDES (SoR - 4.819)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH WEST CORNER -BEAMS - ELUDHAKAM INSIDE BEAMS (SoR - 4.725)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH WEST CORNER -ROOF STONES (SoR-4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH WEST CORNER -KODUNGAI - (SoR-4.722)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH WEST CORNER -VYALAM (SoR-4.723)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH WEST CORNER -SALAHARAM - Chola style (SoR-4.822)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH WEST CORNER - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam etc. (SoR-4.720) - ARCHES

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH EAST CORNER - UPAPEETAM KAPOTHAKAM (SoR-4.713)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH EAST CORNER - ADHISTANA PADMAJAGATHI IN MUKAPATRAM (SoR-4.715)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH EAST CORNER - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam etc. (SoR-4.720) - STHAMBHAVARAGAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH EAST CORNER - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam etc. (SoR-4.720) - PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH EAST CORNER - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam etc. (SoR-4.720) - ARCHES

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH EAST CORNER - SALAHARAM - Chola style (SoR-4.822)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH EAST CORNER - INSIDE PEETAM -PADMAJAGATHI (SoR - 4.711)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH EAST CORNER - SMALL PILLARS - CHITRA KANTA STAMBAM (SoR- 4.811)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH EAST CORNER - PODIKA - PUSHPA POTHIKA WITH 4 SIDES (SoR - 4.819)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH EAST CORNER - BEAMS - ELUDHAKAM INSIDE BEAMS (SoR - 4.725)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH EAST CORNER - ROOF STONES (SoR-4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH EAST CORNER - KODUNGAI - (SoR-4.722)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH EAST CORNER - VYALAM (SoR-4.723)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH EAST CORNER - SALAHARAM - Chola style (SoR-4.822)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH EAST CORNER - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam etc. (SoR-4.720) - ARCHES

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH WEST CORNER - UPAPEETAM KAPOTHAKAM (SoR-4.713)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH WEST CORNER - ADHISTANA PADMAJAGATHI IN MUKAPATRAM (SoR-4.715)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH WEST CORNER - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam etc. (SoR-4.720) - STHAMBHAVARAGAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH WEST CORNER - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam etc. (SoR-4.720) - PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH WEST CORNER - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam etc. (SoR-4.720) - ARCHES

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH WEST CORNER - SALAHARAM - Chola style (SoR-4.822)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH WEST CORNER - INSIDE PEETAM -PADMAJAGATHI (SoR - 4.711)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH WEST CORNER - SMALL PILLARS - CHITRA KANTA STAMBAM (SoR- 4.811)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH WEST CORNER - PODIKA - PUSHPA POTHIKA WITH 4 SIDES (SoR - 4.819)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH WEST CORNER - BEAMS - ELUDHAKAM INSIDE BEAMS (SoR - 4.725)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH WEST CORNER - ROOF STONES (SoR-4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH WEST CORNER - KODUNGAI - (SoR-4.722)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH WEST CORNER - VYALAM (SoR-4.723)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH WEST CORNER - SALAHARAM - Chola style (SoR-4.822)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH WEST CORNER - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam etc. (SoR-4.720) - ARCHES

Cost of Tool making Material like Chisels, Charcoal for furnace etc., for palmana dressing for Five line Dressing, including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.910)

Labour charged for Jointing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.913)

Supply of Granite stones of various sizes for Cut Stone Flooring works and minimum sizes of flooring 12"x24"x4" as directed by the sthapathi. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , operational, incidental charges, overheads and contractor's profit etc., complete. (SoR - 4.410)

Five line Palmana Dressing for hard granite stone not less than 12"x24" uniform size and thickness not lessthan 4" including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR -4.430)

Labour charges for Jointing for hard granite stone & soft variety including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work.- for Cut Stone Flooring works . (SoR-4.470)

Supplying and fixing of scaffolding up to 20'0" ht. including cost and conveyance of all materials such as casurina poles, bamboo mats and coir rope etc., including labour charges, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-7.100)

Hire charges for a capacity of 80 tonnes Crane, including overheads & contractors profit etc. complete for finished item of work. (for Lifting of Stone material etc.,) (R&B - SoR- Hire Charges for Machinery - sl.no-30 a)

Providing and Carving Stone Vigrahams - (i.e., Poornachitram with Sarvabharanams, Sarvaayavayams, Padadi Kereethantham) as per the drawings approved by the Sthapathi with Fine Dressing, Polishing, Both Sides Finishing, with Jeeva Rekalu including Cost and Conveyance of Suitable Variety of Black Granite Stone, Chisels, Hammers, All Materials, Labour Charges, all operational, incidental charges, overheads and contractor's profit etc., using partly with machine cutting and remaining manual finishing Complete. - Standing Posture with Four Hands above 2'-0" to 4'-0" Height (SoR-4.514)

Earth work excavation and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means. - Upto 3 M depth

Filling with useful available earth by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Filling with carted gravel by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for machine mixing, laying concrete in foundations and under flooring bed, finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Footings

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Pedestals

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. -Plinth Beams

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS. - Columns - Unsupported Height -3.66m - Ground Floor

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. - Grade Slab - 150mm thk

Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal Panther) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) - Ground Floor

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 20 to 40 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 40 to 60 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 60 to 80 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 80 to 100 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - above -100 Cft

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR- 4.70)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - CHITRA VANAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - UPAPEETA UPANAM (SoR-4.713)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - UPAPEETAM KAPOTHAKAM (SoR-4.713)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ADHISTANA PADMAJAGATHI IN MUKAPATRAM (SoR-4.715)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - STHAMBHAVARGAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - INSIDE PEETAM -PADMAJAGATHI (SoR - 4.711)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - BEAMS - ELUDHAKAM INSIDE BEAMS (SoR - 4.725)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ROOF STONES (SoR-4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - PILLARS - CHITRA KANTA STAMBAM (SoR- 4.811)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ABOVE ROOF LEVEL - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - 1 KARNAKOOTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ABOVE ROOF LEVEL - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - 1 PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ABOVE ROOF LEVEL - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - 2 KARNAKOOTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ABOVE ROOF LEVEL - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - 2 PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ABOVE ROOF LEVEL - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - 3 KARNAKOOTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ABOVE ROOF LEVEL - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - 3 PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ABOVE ROOF LEVEL - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - 4 KARNAKOOTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ABOVE ROOF LEVEL - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - 4 PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ABOVE ROOF LEVEL - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - 5 KARNAKOOTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ABOVE ROOF LEVEL - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - 5 PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ABOVE ROOF LEVEL - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - 6 KARNAKOOTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ABOVE ROOF LEVEL - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - 6 PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ABOVE ROOF LEVEL - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - 7 KARNAKOOTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ABOVE ROOF LEVEL - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - 7 PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ABOVE ROOF LEVEL - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - 8 KARNAKOOTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ABOVE ROOF LEVEL - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - 8 PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ABOVE ROOF LEVEL - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - KANTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ABOVE ROOF LEVEL - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - SHIKARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ABOVE ROOF LEVEL - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - MAHANAASI

Cost of Tool making Material like Chisels, Charcoal for furnace etc., for palmana dressing for Five line Dressing, including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.910)

Labour charged for Jointing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.913)

Supplying and fixing of scaffolding up to 20'0" ht. including cost and conveyance of all materials such as casurina poles, bamboo mats and coir rope etc., including labour charges, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-7.100)

Hire charges for a capacity of 80 tonnes Crane, including overheads & contractors profit etc. complete for finished item of work. (for Lifting of Stone material etc.,) (R&B - SoR- Hire Charges for Machinery - sl.no-30 a)

Supply and fixing of metal Sthoopy with Sthoopi dandam, Brahma Randram stone, (Gandhapu Raie) including cost and conveyance of all materials and labour charges all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Copper Sthoopi Upto 5'-0" ht (16 to 18 gauge) (SoR-3.23)

Providing and Carving Stone Vigrahams - (i.e., Poornachitram with Sarvabharanams, Sarvaayavayams, Padadi Kereethantham) as per the drawings approved by the Sthapathi with Fine Dressing, Polishing, Both Sides Finishing, with Jeeva Rekalu including Cost and Conveyance of Suitable Variety of Black Granite Stone, Chisels, Hammers, All Materials, Labour Charges, all operational, incidental charges, overheads and contractor's profit etc., using partly with machine cutting and remaining manual finishing Complete for Standing Posture with Four Hands above 6'-0" Height for Dwarapalakas 1st Storey to 9th Storey (i.e., Poornachitram with Sarvabharanams, Sarvaayavayams, Padadi Kereethantham) (SoR - 4.516)

Supply of Hard granite stones of various sizes for Garbhalayam and Ardha Mandapam - Door Frame works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Door Frame upto 12'-0" to 16'-0" Height. (SoR - 4.400)

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. for Door Frames in granite stone - Garbhalayam and Ardha Mandapam (SoR- 4.70)

Door Frames - Dressing - Five Line Palmana instead of fine Dressing and polishing and padmams at top & bottom, Nagabhandam on vertical stones all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam and Ardha Mandapam (SoR- 4.391)

Labour charged for fixing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work - for Door Frames in granite stone - for Five Storied Rajagopuram (SoR - 4.393)

Supply of Granite stones of various sizes for Cut Stone Flooring works and minimum sizes of flooring 12"x24"x4" as directed by the sthapathi. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , operational, incidental charges, overheads and contractor's profit etc., complete. (SoR - 4.410)

Five line Palmana Dressing for hard granite stone not less than 12"x24" uniform size and thickness not lessthan 4" including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR -4.430)

Labour charges for Jointing for hard granite stone & soft variety including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work.- for Cut Stone Flooring works . (SoR-4.470)

Earth work excavation and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means. - Upto 3 M depth.

Filling with useful available earth by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Filling with carted gravel by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for machine mixing, laying concrete in foundations and under flooring bed, finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Footings

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Pedestals

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. - Grade Slab - 150mm thk

Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal Panther) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) - Ground Floor

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 1 to 20 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 20 to 40 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 40 to 60 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 60 to 80 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 80 to 100 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - above -100 Cft

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR- 4.70)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - UPAPEETAM KAPOTHAKAM (SoR-4.713)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ADHISTANA PADMAJAGATHI IN MUKAPATRAM (SoR-4.715)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - STHAMBHAVARGAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - INSIDE PEETAM -PADMAJAGATHI (SoR - 4.711)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - INSIDE PILLARS - CHITRA KANTA STAMBAM (SoR- 4.811)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - PODIKAS - PUSHAPOTHIKA WITH 2 SIDES (SoR - 4.817)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - BEAMS - ELUDHAKAM INSIDE BEAMS (SoR - 4.725)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ROOF STONES (SoR-4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - GOPURAM INSIDE

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - 1 KARNA KOOTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - 1 PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - 2 KARNA KOOTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - 2 PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - 3 KARNA KOOTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - 3 PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - 4 KARNA KOOTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - 4 PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - KANTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - SHIKARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - SIDE MAHA NAASI

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - NAASI TALA

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - FRONT AND REAR NAASI GUDU

Cost of Tool making Material like Chisels, Charcoal for furnace etc., for palmana dressing for Five line Dressing, including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.910)

Labour charged for Jointing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.913)

Supplying and fixing of scaffolding up to 20'0" ht. including cost and conveyance of all materials such as casurina poles, bamboo mats and coir rope etc., including labour charges, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-7.100)

Hire charges for a capacity of 80 tonnes Crane, including overheads & contractors profit etc. complete for finished item of work. (for Lifting of Stone material etc.,) (R&B - SoR- Hire Charges for Machinery - sl.no-30 a)

Providing and Carving Stone Vigrahams - (i.e., Poornachitram with Sarvabharanams, Sarvaayavayams, Padadi Kereethantham) as per the drawings approved by the Sthapathi with Fine Dressing, Polishing, Both Sides Finishing, with Jeeva Rekalu including Cost and Conveyance of Suitable Variety of Black Granite Stone, Chisels, Hammers, All Materials, Labour Charges, all operational, incidental charges, overheads and contractor's profit etc., using partly with machine cutting and remaining manual finishing Complete. - Standing Posture with Four Hands above 2'-0" to 4'-0" Height (SoR-4.514)

Supply and fixing of metal Sthoopy with Sthoopi dandam, Brahma Randram stone, (Gandhapu Raie) including cost and conveyance of all materials and labour charges all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Brass STHOOPI Upto 2'-O" ht (16 to 18 gauge) (SoR - 3.110)

Supply of Hard granite stones of various sizes for Garbhalayam and Ardha Mandapam - Door Frame works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Door Frame upto 12'-0" to 16'-0" Height. (SoR - 4.400)

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. for Door Frames in granite stone - Garbhalayam and Ardha Mandapam (SoR- 4.70)

Door Frames - Dressing - Five Line Palmana instead of fine Dressing and polishing and padmams at top & bottom, Nagabhandam on vertical stones all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam and Ardha Mandapam (SoR- 4.391)

Labour charged for fixing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work - for Door Frames in granite stone - for Five Storied Rajagopuram (SoR - 4.393)

Supply of Granite stones of various sizes for Cut Stone Flooring works and minimum sizes of flooring 12"x24"x4" as directed by the sthapathi. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , operational, incidental charges, overheads and contractor's profit etc., complete. (SoR - 4.410)

Five line Palmana Dressing for hard granite stone not less than 12"x24" uniform size and thickness not lessthan 4" including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR -4.430)

Labour charges for Jointing for hard granite stone & soft variety including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work.- for Cut Stone Flooring works . (SoR-4.470)

Earth work excavation and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means. - Upto 3 M depth

Filling with useful available earth by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Filling with carted gravel by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for machine mixing, laying concrete in foundations and under flooring bed, finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Footings

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Pedestals

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. - Grade Slab - 150mm thk

Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal Panther) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) - Ground Floor

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 1 to 20 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 20 to 40 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 40 to 60 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi)- Cost of stone - 60 to 80 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi)- Cost of stone - 80 to 100 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi)- Cost of stone - above -100 Cft

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR- 4.70)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - CHITRA VANAM (SoR -4.710)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - UPAPEETAM KAPOTHAKAM (SoR-4.713)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ADHISTANA PADMAJAGATHI IN MUKAPATRAM (SoR-4.715)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - STHAMBHAVARAGAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ROOF STONES (SoR-4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - INSIDE PEETAM -PADMAJAGATHI (SoR - 4.711)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - KARNAKOOTAM-1

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - ROOF STONES

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - KARNAKOOTAM-2

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - ROOF STONES

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - KANTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - SHIKARAM

Cost of Tool making Material like Chisels, Charcoal for furnace etc., for palmana dressing for Five line Dressing, including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.910)

Labour charged for Jointing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.913)

Supplying and fixing of scaffolding up to 20'0" ht. including cost and conveyance of all materials such as casurina poles, bamboo mats and coir rope etc., including labour charges, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-7.100)

Hire charges for a capacity of 80 tonnes Crane, including overheads & contractors profit etc. complete for finished item of work. (for Lifting of Stone material etc.,) (R&B - SoR- Hire Charges for Machinery - sl.no-30 a)

Providing and Carving Stone Vigrahams - (i.e., Poornachitram with Sarvabharanams, Sarvaayavayams, Padadi Kereethantham) as per the drawings approved by the Sthapathi with Fine Dressing, Polishing, Both Sides Finishing, with Jeeva Rekalu including Cost and Conveyance of Suitable Variety of Black Granite Stone, Chisels, Hammers, All Materials, Labour Charges, all operational, incidental charges, overheads and contractor's profit etc., using partly with machine cutting and remaining manual finishing Complete. - Standing Posture with Four Hands above 2'-0" to 4'-0" Height (SoR-4.514)

Supply and fixing of metal Sthoopy with Sthoopi dandam, Brahma Randram stone, (Gandhapu Raie) including cost and conveyance of all materials and labour charges all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Brass STHOOPI Upto 2'-O" ht (16 to 18 gauge) (SoR - 3.110)

Supply of Hard granite stones of various sizes for Garbhalayam and Ardha Mandapam - Door Frame works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Door Frame upto 9'-0" to 12'-0" Height. (SoR - 4.390)

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. for Door Frames in granite stone - Garbhalayam and Ardha Mandapam (SoR- 4.70)

Door Frames - Dressing - Five Line Palmana instead of fine Dressing and polishing and padmams at top & bottom, Nagabhandam on vertical stones all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work - Three Storied Rajagopuram

Labour charged for fixing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work - for Door Frames in granite stone - Three Storied Rajagopuram (SoR- 4.392)

Supply of Granite stones of various sizes for Cut Stone Flooring works and minimum sizes of flooring 12"x24"x4" as directed by the sthapathi. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , operational, incidental charges, overheads and contractor's profit etc., complete. (SoR - 4.410)

Five line Palmana Dressing for hard granite stone not less than 12"x24" uniform size and thickness not lessthan 4" including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR -4.430)

Labour charges for Jointing for hard granite stone & soft variety including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work.- for Cut Stone Flooring works . (SoR-4.470)

Earth work excavation and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means. - Upto 3 M depth

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for machine mixing, laying concrete in foundations and under flooring bed, finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Pedestal

Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal Panther) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) - Ground Floor

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 60 to 80 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - above -100 Cft

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR- 4.70)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Nandi Peetam-VEDIKA(SoR-4.718)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Dwajam Peetam & Balipeetam

Cost of Tool making Material like Chisels, Charcoal for furnace etc., for palmana dressing for Five line Dressing, including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.910)

Labour charged for Jointing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.913)

Earth work excavation and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means. - Upto 3 M depth

Filling with useful available earth by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Filling with carted gravel by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Providing post construction anti termite treatment by drilling 1/2 inch dia., holes at the edges of wall floor junction and pouring anti termite chemical (Imidacloprid 30.5 SC, 10.5 ml for 5 Liters of water as per IS 16131.) with a hand operated pressure pump until refusal or to a maximum of one liter per hole. Holes shall be sealed with cement motor after treatment and providing spraying and injecting termiticides for treating and applying to doors, windows, frames, removing, crusting treating in Treatment along outside of foundations (i.e.,Soil in contact with external walls around the building and Concrete or Masonry apron around the building), Treatment of soil under floors - Inside Building, Treatment to voids in masonry, Treatment at points of contact of woodwork, Treatment of Wood Work, Treatment of Electrical Fixtures, as directed in IS 6313 Part 3 2013 with preventive chemicals duly taking precautions for health hazards and safety measures for the occupants including all costs, conveyances of all materials and labour charges,overheads and contractors profit etc complete for finished item of work to the satisfaction of the Engineer-in-Charge. The plinth area of the building each floor shall be taken for the purpose of payment.

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for machine mixing, laying concrete in foundations and under flooring bed, finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Footings

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Pedestals

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Plinth Beams

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS. - Columns - un-supported height of 3.66m - Ground Floor

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. - Grade Slab -150mm thk

Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal Panther) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) - Ground Floor

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 1 to 20 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 20 to 40 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 40 to 60 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 60 to 80 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 80 to 100 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - above -100 Cft

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR- 4.70)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ALLROUND PEETAM - PADMAJAGATHI (SoR - 4.711)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - UPAPEETAM KANTAM(SoR-4.715)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work.- ADHISTANAMJAGATHI (PLAIN)(SoR-4.714)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - STHAMBHAVARGAM L-1

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - STHAMBHAVARGAM L-2

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - UTTARAVARGAM-UTTARAM ELUDHAKAM(SoR-4.721)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - KAPODAKAM(SoR-4.722)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - VYALAM(SoR-4.723)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ROOF STONES:-(SoR-4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - KARNAKOOTAM VEDIKA & KANTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - SMALL PRASTARAM & SMALL KANTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ULNATYA KANTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - UTTARA VARHGAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - KAPODAKAM AND VYALAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - VEDIKA AND KANTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - SMALL PRASTARAM & SMALL KANTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ULNATYA KANTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - VEDIKA

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - KANTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - SHIKARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - MAHANAASI AND ALPANAASI

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - CHITRAVANAM ALLROUND PEETAM-PADMA JAGATHI(SoR-4.711)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - PILLARS- CHITRA KANTA STAMBAM (SoR- 4.811)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - BEAMS- ELUDHAKAM INSIDE BEAMS (SoR - 4.725)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - MANDAPAM SPAN ROOF STONES(SoR-4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - KONAVATTAM STONES-(SoR-4.724)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - KODUNGAI (SoR-4.722)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - VYALAM & SALAHARAM chola style(SoR-4.822)

Cost of Tool making Material like Chisels, Charcoal for furnace etc., for palmana dressing for Five line Dressing, including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.910)

Labour charged for Jointing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.913)

Supplying and fixing of Somasutram with yalitala upto 3'6" to 4'6" length (Black granite stone) including fine dressing and polishing to the shape and dimensions as per approved drawings including cost and conveyance of all materials and labour charges etc complete for finished item of work.

Supplying and fixing of Balipeetam upto 1'0" height(Black granite stone) including fine dressing and polishing to the shape and dimensions as per approved drawings including cost and conveyance of all materials and labour charges etc complete for finished item of work.

Supplying and fixing of scaffolding up to 20'0" ht. including cost and conveyance of all materials such as casurina poles, bamboo mats and coir rope etc., including labour charges etc., compete

Supply and fixing of metal Sthoopy with Sthoopi dandam, Brahma Randram stone, (Gandhapu Raie) including cost and conveyance of all materials and labour charges all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Copper Sthoopi - Upto 4'-0" Height (16 to 18 gauge) (SoR- 3.23)

Hire charges for a capacity of 80 tonnes Crane, including overheads & contractors profit etc. complete for finished item of work. (for Lifting of Stone material etc.,) (R&B - SoR- Hire Charges for Machinery - sl.no-30 a)

Supply of Hard granite stones of various sizes for Garbhalayam and Ardha Mandapam - Door Frame works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Door Frame above 7'-0" Height (SoR- 4.330)

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. for Door Frames in granite stone - Garbhalayam and Ardha Mandapam (SoR- 4.70)

Door Frames - Dressing - Five Line Palmana instead of fine Dressing and polishing and padmams at top & bottom, Nagabhandam on vertical stones all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam and Ardha Mandapam (SoR- 4.340)

Labour charged for fixing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work - for Door Frames in granite stone - Above 7'-0" to 9'-0" Height

Supply of Granite stones of various sizes for Cut Stone Flooring works and minimum sizes of flooring 12"x24"x4" as directed by the sthapathi. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , operational, incidental charges, overheads and contractor's profit etc., complete. (SoR - 4.410)

Five line Palmana Dressing for hard granite stone not less than 12"x24" uniform size and thickness not lessthan 4" including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR -4.430)

Labout charges for Jointing for hard granite stone & soft variety including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work.- for Cut Stone Flooring works . (SoR-4.470)

Supply & fixing of best Teak Wood Ornamental door shutters with two leaves as per standard temple design includig cost of frame and planks and preparation charges. Fixing of shutters in position locking arrangements etc., complete. Door shutter with Best Teak Wood frame of 2" thick, Single Padmams of 2.5" thick and Best Teak Wood rare plank of thickness 1.5" - including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work - Material Charges

Supply & fixing of best Teak Wood Ornamental door shutters with two leaves as per standard temple design includig cost of frame and planks and preparation charges. Fixing of shutters in position locking arrangements etc., complete. Door shutter with Best Teak Wood frame of 2" thick, Single Padmams of 2.5" thick and Best Teak Wood rare plank of thickness 1.5" - including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work - Labour Charges

Carving Stone Vigrahams - Standing Posture with Four Hands above 2'-0" to 4'-0" Height (i.e., Poornachitram with Sarvabharanams, Sarvaayavayams, Padadi Kereethantham) as per the drawing approved by the Sthapathi with Fine Dressing, Polishing, Both Sides Finishing, with Jeeva Rekalu including Cost and Conveyance of Suitable Variety of Black Granite Stone, Chisels, Hammers, All Materials, Labour Charges etc,using partly with machine cutting and remaining manual. including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work.(SoR-4.514)

Earth work excavation and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means. - Upto 3 M depth

Filling with useful available earth by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Filling with carted gravel by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Providing post construction anti termite treatment by drilling 1/2 inch dia., holes at the edges of wall floor junction and pouring anti termite chemical (Imidacloprid 30.5 SC, 10.5 ml for 5 Liters of water as per IS 16131.) with a hand operated pressure pump until refusal or to a maximum of one liter per hole. Holes shall be sealed with cement motor after treatment and providing spraying and injecting termiticides for treating and applying to doors, windows, frames, removing, crusting treating in Treatment along outside of foundations (i.e.,Soil in contact with external walls around the building and Concrete or Masonry apron around the building), Treatment of soil under floors - Inside Building, Treatment to voids in masonry, Treatment at points of contact of woodwork, Treatment of Wood Work, Treatment of Electrical Fixtures, as directed in IS 6313 Part 3 2013 with preventive chemicals duly taking precautions for health hazards and safety measures for the occupants including all costs, conveyances of all materials and labour charges,overheads and contractors profit etc complete for finished item of work to the satisfaction of the Engineer-in-Charge. The plinth area of the building each floor shall be taken for the purpose of payment.

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for machine mixing, laying concrete in foundations and under flooring bed, finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Footings

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Pedestals

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Plinth Beams

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS. - Columns - un-supported height of 3.66m - Ground Floor

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. - Grade Slab -150mm thk

Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal Panther) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) - Ground Floor

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 1 to 20 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 20 to 40 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 40 to 60 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 60 to 80 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 80 to 100 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - above -100 Cft

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR- 4.70)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ALLROUND PEETAM - PADMAJAGATHI (SoR - 4.711)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - UPAPEETAM KANTAM(SoR-4.715)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work.- ADHISTANAMJAGATHI (PLAIN)(SoR-4.714)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - STHAMBHAVARGAM L-1

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - STHAMBHAVARGAM L-2

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - UTTARAVARGAM-UTTARAM ELUDHAKAM(SoR-4.721)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - KAPODAKAM(SoR-4.722)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - VYALAM(SoR-4.723)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ROOF STONES:-(SoR-4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - KARNAKOOTAM VEDIKA & KANTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - SMALL PRASTARAM & SMALL KANTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ULNATYA KANTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - UTTARA VARHGAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - KAPODAKAM AND VYALAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - VEDIKA AND KANTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - SMALL PRASTARAM & SMALL KANTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ULNATYA KANTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - VEDIKA

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - KANTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - SHIKARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - MAHANAASI AND ALPANAASI

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - CHITRAVANAM ALLROUND PEETAM-PADMA JAGATHI(SoR-4.711)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - PILLARS- CHITRA KANTA STAMBAM (SoR- 4.811)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - BEAMS- ELUDHAKAM INSIDE BEAMS (SoR - 4.725)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - MANDAPAM SPAN ROOF STONES(SoR-4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - KONAVATTAM STONES-(SoR-4.724)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - KODUNGAI (SoR-4.722)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - VYALAM & SALAHARAM chola style(SoR-4.822)

Cost of Tool making Material like Chisels, Charcoal for furnace etc., for palmana dressing for Five line Dressing, including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.910)

Labour charged for Jointing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.913)

Supplying and fixing of Somasutram with yalitala upto 3'6" to 4'6" length (Black granite stone) including fine dressing and polishing to the shape and dimensions as per approved drawings including cost and conveyance of all materials and labour charges etc complete for finished item of work.

Supplying and fixing of Balipeetam upto 1'0" height(Black granite stone) including fine dressing and polishing to the shape and dimensions as per approved drawings including cost and conveyance of all materials and labour charges etc complete for finished item of work.

Supplying and fixing of scaffolding up to 20'0" ht. including cost and conveyance of all materials such as casurina poles, bamboo mats and coir rope etc., including labour charges etc., compete

Supply and fixing of metal Sthoopy with Sthoopi dandam, Brahma Randram stone, (Gandhapu Raie) including cost and conveyance of all materials and labour charges all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Copper Sthoopi - Upto 4'-0" Height (16 to 18 gauge) (SoR- 3.23)

Hire charges for a capacity of 80 tonnes Crane, including overheads & contractors profit etc. complete for finished item of work. (for Lifting of Stone material etc.,) (R&B - SoR- Hire Charges for Machinery - sl.no-30 a)

Supply of Hard granite stones of various sizes for Garbhalayam and Ardha Mandapam - Door Frame works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Door Frame above 7'-0" Height (SoR- 4.330)

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. for Door Frames in granite stone - Garbhalayam and Ardha Mandapam (SoR- 4.70)

Door Frames - Dressing - Five Line Palmana instead of fine Dressing and polishing and padmams at top & bottom, Nagabhandam on vertical stones all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam and Ardha Mandapam (SoR- 4.340)

Labour charged for fixing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work - for Door Frames in granite stone - Above 7'-0" to 9'-0" Height

Supply of Granite stones of various sizes for Cut Stone Flooring works and minimum sizes of flooring 12"x24"x4" as directed by the sthapathi. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , operational, incidental charges, overheads and contractor's profit etc., complete. (SoR - 4.410)

Five line Palmana Dressing for hard granite stone not less than 12"x24" uniform size and thickness not lessthan 4" including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR -4.430)

Labout charges for Jointing for hard granite stone & soft variety including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work.- for Cut Stone Flooring works . (SoR-4.470)

Supply & fixing of best Teak Wood Ornamental door shutters with two leaves as per standard temple design includig cost of frame and planks and preparation charges. Fixing of shutters in position locking arrangements etc., complete. Door shutter with Best Teak Wood frame of 2" thick, Single Padmams of 2.5" thick and Best Teak Wood rare plank of thickness 1.5" - including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work - Material Charges

Supply & fixing of best Teak Wood Ornamental door shutters with two leaves as per standard temple design includig cost of frame and planks and preparation charges. Fixing of shutters in position locking arrangements etc., complete. Door shutter with Best Teak Wood frame of 2" thick, Single Padmams of 2.5" thick and Best Teak Wood rare plank of thickness 1.5" - including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work - Labour Charges

Carving Stone Vigrahams - Standing Posture with Four Hands above 2'-0" to 4'-0" Height (i.e., Poornachitram with Sarvabharanams, Sarvaayavayams, Padadi Kereethantham) as per the drawing approved by the Sthapathi with Fine Dressing, Polishing, Both Sides Finishing, with Jeeva Rekalu including Cost and Conveyance of Suitable Variety of Black Granite Stone, Chisels, Hammers, All Materials, Labour Charges etc,using partly with machine cutting and remaining manual. including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work.(SoR-4.514)

Earth work excavation and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means. - Upto 3 M depth

Filling with useful available earth by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Filling with carted gravel by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Providing post construction anti termite treatment by drilling 1/2 inch dia., holes at the edges of wall floor junction and pouring anti termite chemical (Imidacloprid 30.5 SC, 10.5 ml for 5 Liters of water as per IS 16131.) with a hand operated pressure pump until refusal or to a maximum of one liter per hole. Holes shall be sealed with cement motor after treatment and providing spraying and injecting termiticides for treating and applying to doors, windows, frames, removing, crusting treating in Treatment along outside of foundations (i.e.,Soil in contact with external walls around the building and Concrete or Masonry apron around the building), Treatment of soil under floors - Inside Building, Treatment to voids in masonry, Treatment at points of contact of woodwork, Treatment of Wood Work, Treatment of Electrical Fixtures, as directed in IS 6313 Part 3 2013 with preventive chemicals duly taking precautions for health hazards and safety measures for the occupants including all costs, conveyances of all materials and labour charges,overheads and contractors profit etc complete for finished item of work to the satisfaction of the Engineer-in-Charge. The plinth area of the building each floor shall be taken for the purpose of payment.

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for machine mixing, laying concrete in foundations and under flooring bed, finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Footings

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Pedestals

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Plinth Beams

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS. - Columns - Unsupported Height -3.66m - Ground Floor

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. - Grade Slab -150mm thk

Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal Panther) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) - Ground Floor

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 1 to 20 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 20 to 40 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 40 to 60 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 60 to 80 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - above -100 Cft

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR- 4.70)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - LAYER-1 UPAPEETAM KAPOTHAKAM (SoR-4.713)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - LAYER-2 ADHISTANA JAGATHI PLAIN (SoR-4.714)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - LAYER-3 ADHISTANA KUMUDAKAM (SoR-4.716)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - LAYER-4 ADHISTANA PATTIKA & VEDIKA (SoR-4.717)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - LAYER-5 STHAMBHAVARGAM-1

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - LAYER-6 STHAMBHAVARGAM-2

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - LAYER-7 UTTARAVARGAM (SoR-4.721)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - LAYER-8 KAPODAKAM (SoR-4.722)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - LAYER-9 VYALAM (SoR-4.723)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ROOF STONE S:- KONAVATTAM (SoR-4.724)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - CHATURAVATTAM (SoR-4.724)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - KONAVATTAM (SoR-4.724)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - COVERING STONE-VYALAM (SoR-4.723)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - GARBHALAYAM INSIDE (SoR-4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - GARBHALAYAM STEPS (SoR-4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - LAYER-10 KARNAKOOTA VEDIKA

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - LAYER-11 KARNAKOOTA KANTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - LAYER-12 KARNAKOOTA KAPODAKAM KANTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - LAYER-13 KARNAKOOTA ULNATYAKANTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - LAYER-14 UTTARA VARGAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - LAYER-15 KAPODAKAM & VYALAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - LAYER-16 VEDIKA

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - LAYER-17 KANTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - LAYER-18 ALAMBANAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - LAYER-19 SHIKARAM ALUNGU

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - LAYER-20 MAHAPADMAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - PILLARS - ASWAPADAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - PILLARS - PILLAR- CHITRA KANTA STAMBAM (SoR- 4.811)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - PILLARS - PALIKAPADMAM & KUDAM - CHITRA KANTA STAMBAM (SoR- 4.811)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - PILLARS - PODIKAS L SHAPE-PUSHPODIKA WITH 2 SIDES

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - PILLARS - PODIKAS T SHAPE-PUSHPODIKA WITH 3 SIDES

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - PILLARS - PODIKAS + SHAPE-PUSHPODIKA WITH 4 SIDES

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM UTTARA BEAMS - HORIZONTAL & VERTICAL BEAMS ELUDHAKAM INSIDE BEAMS (SoR - 4.725)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - KODUNGAI - (SoR-4.722)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - VYALAM - (SoR-4.723)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM SALAHARAM:- Chola style (SoR-4.822)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM ROOF STONES:- (SoR-4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MOOSHIKAM PEETAM(SoR-4.718)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - BALIPEETA PEETAM(SoR-4.718)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - DWAJAM PEETAM(SoR-4.718)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - STEPS-(SoR-4.726)

Cost of Tool making Material like Chisels, Charcoal for furnace etc., for palmana dressing for Five line Dressing, including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.910)

Labour charged for Jointing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.913)

Supplying and fixing of Somasutram with yalitala upto 3'6" to 4'6" length (Black granite stone) including fine dressing and polishing to the shape and dimensions as per approved drawings including cost and conveyance of all materials and labour charges etc complete for finished item of work.

Supplying and fixing of Balipeetam upto 1'0" height(Black granite stone) including fine dressing and polishing to the shape and dimensions as per approved drawings including cost and conveyance of all materials and labour charges etc complete for finished item of work.

Supplying and fixing of scaffolding up to 20'0" ht. including cost and conveyance of all materials such as casurina poles, bamboo mats and coir rope etc., including labour charges, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-7.100)

Hire charges for a capacity of 80 tonnes Crane, including overheads & contractors profit etc. complete for finished item of work. (for Lifting of Stone material etc.,) (R&B - SoR- Hire Charges for Machinery - sl.no-30 a)

Supply of Hard granite stones of various sizes for Garbhalayam and Ardha Mandapam - Door Frame works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Door Frame above 7'-0" Height (SoR- 4.330)

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. for Door Frames in granite stone - Garbhalayam and Ardha Mandapam (SoR- 4.70)

Door Frames - Dressing - Five Line Palmana instead of fine Dressing and polishing and padmams at top & bottom, Nagabhandam on vertical stones all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam and Ardha Mandapam (SoR- 4.340)

Labour charged for fixing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work - for Door Frames in granite stone - Above 7'-0" to 9'-0" Height

Supply of Granite stones of various sizes for Cut Stone Flooring works and minimum sizes of flooring 12"x24"x4" as directed by the sthapathi. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , operational, incidental charges, overheads and contractor's profit etc., complete. (SoR - 4.410)

Five line Palmana Dressing for hard granite stone not less than 12"x24" uniform size and thickness not lessthan 4" including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR -4.430)

Labout charges for Jointing for hard granite stone & soft variety including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work.- for Cut Stone Flooring works . (SoR-4.470)

Earth work excavation and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means. - Upto 3 M depth

Filling with useful available earth by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Filling with carted gravel by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Providing post construction anti termite treatment by drilling 1/2 inch dia., holes at the edges of wall floor junction and pouring anti termite chemical (Imidacloprid 30.5 SC, 10.5 ml for 5 Liters of water as per IS 16131.) with a hand operated pressure pump until refusal or to a maximum of one liter per hole. Holes shall be sealed with cement motor after treatment and providing spraying and injecting termiticides for treating and applying to doors, windows, frames, removing, crusting treating in Treatment along outside of foundations (i.e.,Soil in contact with external walls around the building and Concrete or Masonry apron around the building), Treatment of soil under floors - Inside Building, Treatment to voids in masonry, Treatment at points of contact of woodwork, Treatment of Wood Work, Treatment of Electrical Fixtures, as directed in IS 6313 Part 3 2013 with preventive chemicals duly taking precautions for health hazards and safety measures for the occupants including all costs, conveyances of all materials and labour charges,overheads and contractors profit etc complete for finished item of work to the satisfaction of the Engineer-in-Charge. The plinth area of the building each floor shall be taken for the purpose of payment.

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for machine mixing, laying concrete in foundations and under flooring bed, finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Footings

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Pedestals

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Plinth Beams

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS. - Columns - Unsupported Height -3.66m - Ground Floor

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. - Grade Slab -150mm thk

Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal Panther) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) - Ground Floor

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 1 to 20 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 20 to 40 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 40 to 60 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 60 to 80 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - above -100 Cft

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR- 4.70)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - LAYER-1 UPAPEETAM KAPOTHAKAM (SoR-4.713)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - LAYER-2 ADHISTANA JAGATHI PLAIN (SoR-4.714)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - LAYER-3 ADHISTANA KUMUDAKAM (SoR-4.716)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - LAYER-4 ADHISTANA PATTIKA & VEDIKA (SoR-4.717)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - LAYER-5 STHAMBHAVARGAM-1

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - LAYER-6 STHAMBHAVARGAM-2

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - LAYER-7 UTTARAVARGAM (SoR-4.721)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - LAYER-8 KAPODAKAM (SoR-4.722)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - LAYER-9 VYALAM (SoR-4.723)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ROOF STONE S:- KONAVATTAM (SoR-4.724)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - CHATURAVATTAM (SoR-4.724)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - KONAVATTAM (SoR-4.724)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - COVERING STONE-VYALAM (SoR-4.723)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - GARBHALAYAM INSIDE (SoR-4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - GARBHALAYAM STEPS (SoR-4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - LAYER-10 KARNAKOOTA VEDIKA

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - LAYER-11 KARNAKOOTA KANTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - LAYER-12 KARNAKOOTA KAPODAKAM KANTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - LAYER-13 KARNAKOOTA ULNATYAKANTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - LAYER-14 UTTARA VARGAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - LAYER-15 KAPODAKAM & VYALAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - LAYER-16 VEDIKA

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - LAYER-17 KANTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - LAYER-18 ALAMBANAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - LAYER-19 SHIKARAM ALUNGU

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - LAYER-20 MAHAPADMAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - PILLARS - ASWAPADAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - PILLARS - PILLAR- CHITRA KANTA STAMBAM (SoR- 4.811)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - PILLARS - PALIKAPADMAM & KUDAM - CHITRA KANTA STAMBAM (SoR- 4.811)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - PILLARS - PODIKAS L SHAPE-PUSHPODIKA WITH 2 SIDES

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - PILLARS - PODIKAS T SHAPE-PUSHPODIKA WITH 3 SIDES

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - PILLARS - PODIKAS + SHAPE-PUSHPODIKA WITH 4 SIDES

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM UTTARA BEAMS - HORIZONTAL & VERTICAL BEAMS ELUDHAKAM INSIDE BEAMS (SoR - 4.725)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - KODUNGAI - (SoR-4.722)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - VYALAM - (SoR-4.723)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM SALAHARAM:- Chola style (SoR-4.822)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM ROOF STONES:- (SoR-4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MOOSHIKAM PEETAM(SoR-4.718)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - BALIPEETA PEETAM(SoR-4.718)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - DWAJAM PEETAM(SoR-4.718)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - STEPS-(SoR-4.726)

Cost of Tool making Material like Chisels, Charcoal for furnace etc., for palmana dressing for Five line Dressing, including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.910)

Labour charged for Jointing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.913)

Supplying and fixing of Somasutram with yalitala upto 3'6" to 4'6" length (Black granite stone) including fine dressing and polishing to the shape and dimensions as per approved drawings including cost and conveyance of all materials and labour charges etc complete for finished item of work.

Supplying and fixing of Balipeetam upto 1'0" height(Black granite stone) including fine dressing and polishing to the shape and dimensions as per approved drawings including cost and conveyance of all materials and labour charges etc complete for finished item of work.

Supplying and fixing of scaffolding up to 20'0" ht. including cost and conveyance of all materials such as casurina poles, bamboo mats and coir rope etc., including labour charges, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-7.100)

Hire charges for a capacity of 80 tonnes Crane, including overheads & contractors profit etc. complete for finished item of work. (for Lifting of Stone material etc.,) (R&B - SoR- Hire Charges for Machinery - sl.no-30 a)

Supply of Hard granite stones of various sizes for Garbhalayam and Ardha Mandapam - Door Frame works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Door Frame above 7'-0" Height (SoR- 4.330)

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. for Door Frames in granite stone - Garbhalayam and Ardha Mandapam (SoR- 4.70)

Door Frames - Dressing - Five Line Palmana instead of fine Dressing and polishing and padmams at top & bottom, Nagabhandam on vertical stones all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam and Ardha Mandapam (SoR- 4.340)

Labour charged for fixing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work - for Door Frames in granite stone - Above 7'-0" to 9'-0" Height

Supply of Granite stones of various sizes for Cut Stone Flooring works and minimum sizes of flooring 12"x24"x4" as directed by the sthapathi. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , operational, incidental charges, overheads and contractor's profit etc., complete. (SoR - 4.410)

Five line Palmana Dressing for hard granite stone not less than 12"x24" uniform size and thickness not lessthan 4" including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR -4.430)

Labout charges for Jointing for hard granite stone & soft variety including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work.- for Cut Stone Flooring works . (SoR-4.470)

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Pedestals

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. - Grade Slab -150mm thk

Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal Panther) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) - Ground Floor

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 1 to 20 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 20 to 40 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 40 to 60 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 60 to 80 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - above 100 Cft

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR- 4.70)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Grabhalayam - UPAPEETAM KAPOTHAKAM (SoR-4.713)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Grabhalayam - ADHISTANA PADMAJAGATHI IN MUKAPATRAM (SoR-4.715)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Grabhalayam - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - STHAMBHAVARGAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Grabhalayam - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Grabhalayam - ROOF STONES KONAVATTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Grabhalayam - CHATURA VATTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Grabhalayam - COVERING STONE

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Grabhalayam - STEPS

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Grabhalayam - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - 1 KARNAKOOTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Grabhalayam - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - 1 PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Grabhalayam - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - KANTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Grabhalayam - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - SHIKARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - ALLROUND PEETAM - PADMAJAGATHI (SoR - 4.711)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - PILLARS - CHITRA KANTA STAMBAM (SoR- 4.811)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - PODIKAS - PUSHPA POTHIKA WITH 4 SIDES (SoR - 4.819)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - BEAMS HORIZONTAL - ELUDHAKAM INSIDE BEAMS (SoR - 4.725)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - BEAMS VERTICAL - ELUDHAKAM INSIDE BEAMS (SoR - 4.725)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - KODUNGAI - (SoR-4.722)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - VYALAM (SoR-4.723)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - SALAHARAM - Chola style (SoR-4.822)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ARCHES

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - ROOF STONES:- (SoR-4.726)

Cost of Tool making Material like Chisels, Charcoal for furnace etc., for palmana dressing for Five line Dressing, including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.910)

Labour charged for Jointing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.913)

Supplying and fixing of scaffolding up to 20'0" ht. including cost and conveyance of all materials such as casurina poles, bamboo mats and coir rope etc., including labour charges, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-7.100)

Hire charges for a capacity of 80 tonnes Crane, including overheads & contractors profit etc. complete for finished item of work. (for Lifting of Stone material etc.,) (R&B - SoR- Hire Charges for Machinery - sl.no-30 a)

Supply of Hard granite stones of various sizes for Garbhalayam and Ardha Mandapam - Door Frame works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Door Frame above 7'-0" Height (SoR- 4.330)

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. for Door Frames in granite stone - Garbhalayam and Ardha Mandapam (SoR- 4.70)

Door Frames - Dressing - Five Line Palmana instead of fine Dressing and polishing and padmams at top & bottom, Nagabhandam on vertical stones all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam and Ardha Mandapam (SoR- 4.340)

Labour charged for fixing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work - for Door Frames in granite stone - Above 7'-0" to 9'-0" Height

Supply of Granite stones of various sizes for Cut Stone Flooring works and minimum sizes of flooring 12"x24"x4" as directed by the sthapathi. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , operational, incidental charges, overheads and contractor's profit etc., complete. (SoR - 4.410)

Five line Palmana Dressing for hard granite stone not less than 12"x24" uniform size and thickness not lessthan 4" including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR -4.430)

Labout charges for Jointing for hard granite stone & soft variety including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work.- for Cut Stone Flooring works . (SoR-4.470)

Providing and Carving Stone Vigrahams - Standing Posture with Four Hands above 2'-0" to 4'-0" Height (i.e., Poornachitram with Sarvabharanams, Sarvaayavayams, Padadi Kereethantham) as per the drawing approved by the Sthapathi with Fine Dressing, Polishing, both sides finishing with Jeeva rekalu, including cost and conveyance of suitable variety of black granite stone, chisels, hammers, all materials, labour charges etc, using partly with machine cutting and remaining manual finishing complete for finished item of work

Earth work excavation and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means. - Upto 3 M depth

Filling with useful available earth by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Filling with carted gravel by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Providing post construction anti termite treatment by drilling 1/2 inch dia., holes at the edges of wall floor junction and pouring anti termite chemical (Imidacloprid 30.5 SC, 10.5 ml for 5 Liters of water as per IS 16131.) with a hand operated pressure pump until refusal or to a maximum of one liter per hole. Holes shall be sealed with cement motor after treatment and providing spraying and injecting termiticides for treating and applying to doors, windows, frames, removing, crusting treating in Treatment along outside of foundations (i.e.,Soil in contact with external walls around the building and Concrete or Masonry apron around the building), Treatment of soil under floors - Inside Building, Treatment to voids in masonry, Treatment at points of contact of woodwork, Treatment of Wood Work, Treatment of Electrical Fixtures, as directed in IS 6313 Part 3 2013 with preventive chemicals duly taking precautions for health hazards and safety measures for the occupants including all costs, conveyances of all materials and labour charges,overheads and contractors profit etc complete for finished item of work to the satisfaction of the Engineer-in-Charge. The plinth area of the building each floor shall be taken for the purpose of payment.

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for machine mixing, laying concrete in foundations and under flooring bed, finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Footings

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Plinth Beams

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS. - Columns - Unsupported Height -3.66m - Ground Floor

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. - Grade Slab -150mm thk

Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal Panther) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) - Ground Floor

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 1 to 20 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi)- Cost of stone - 20 to 40 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 40 to 60 Cft

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR- 4.70)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ALLROUND PEETAM-VEDIKA(Sor 4.718)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SMALL PILLARS- - CHITRA KANTA STAMBAM (SoR- 4.811)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ASWAPADAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - HIGH ROOF PODIKAS -PUSHPODIKA WITH 2 SIDES

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - LOW ROOF PODIKAS L SHAPE-PUSHPODIKA WITH 2 SIDES

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work.- LOW ROOF PODIKAS T SHAPE-PUSHPODIKA WITH 3 SIDES

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - LOW ROOF PODIKAS + SHAPE-PUSHPODIKA WITH 4 SIDES

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - PILLAR STONE - CHITRA KANTA STAMBAM (SoR- 4.811)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work.- PALIKAPADAMAM - CHITRA KANTA STAMBAM (SoR- 4.811)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - BEAMS-EDULAKAM INSIDE BEAMS(SoR 4.725)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - KODUNGAI STONES (LOW ROOF ) TOP (SoR-4.722)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - KODUNGAI STONES (LOW ROOF ) BOTTOM -VYALAM (SoR-4.723)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - KODUNGAI STONES (HIGH ROOF) TOP (SoR-4.722)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - KODUNGAI STONES (HIGH ROOF) TOP- VYALAM(SoR-4.723)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM ROOF STONES (INCL HIGH ROOF)(SoR-4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - VYALAM(SoR-4.723)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - STEPS

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM PARAPET WALL-PUSHPAPODIKA WITH 1 SIDE(SoR 4.816)

Cost of Tool making Material like Chisels, Charcoal for furnace etc., for palmana dressing for Five line Dressing, including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.910)

Labour charged for Jointing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.913)

Supplying and fixing of scaffolding up to 20'0" ht. including cost and conveyance of all materials such as casurina poles, bamboo mats and coir rope etc., including labour charges, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-7.100)

Hire charges for a capacity of 80 tonnes Crane, including overheads & contractors profit etc. complete for finished item of work. (for Lifting of Stone material etc.,) (R&B - SoR- Hire Charges for Machinery - sl.no-30 a)

Supply of Granite stones of various sizes for Cut Stone Flooring works and minimum sizes of flooring 12"x24"x4" as directed by the sthapathi. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , operational, incidental charges, overheads and contractor's profit etc., complete. (SoR - 4.410)

Five line Palmana Dressing for hard granite stone not less than 12"x24" uniform size and thickness not lessthan 4" including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR -4.430)

Labout charges for Jointing for hard granite stone & soft variety including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work.- for Cut Stone Flooring works . (SoR-4.470)

Earth work excavation and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means. - Upto 3 M depth

Filling with useful available earth by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Filling with carted gravel by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for machine mixing, laying concrete in foundations and under flooring bed, finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Footings

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Plinth Beams

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS. - Columns - un-supported height of 3.66m - Ground Floor

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. - Grade Slab -150mm thk

Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal Panther) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) - Ground Floor

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 40 to 60 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 60 to 80 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - above -100 Cft

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR- 4.70)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - UPAPEETAM KAPOTHAKAM (SoR-4.713)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - PILLARS- CHITRA KANTA STAMBAM (SoR- 4.811)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - PODIKA-PUSHPODIKA WITH 4 SIDES (SoR-4.819)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work.- UTTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - PADMA SHIKARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work.- ROOF STONES(SoR 4.726)

Cost of Tool making Material like Chisels, Charcoal for furnace etc., for palmana dressing for Five line Dressing, including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.910)

Labour charged for Jointing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.913)

Supplying and fixing of scaffolding up to 20'0" ht. including cost and conveyance of all materials such as casurina poles, bamboo mats and coir rope etc., including labour charges, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-7.100)

Hire charges for a capacity of 80 tonnes Crane, including overheads & contractors profit etc. complete for finished item of work. (for Lifting of Stone material etc.,) (R&B - SoR- Hire Charges for Machinery - sl.no-30 a)

Supply and fixing of metal Sthoopy with Sthoopi dandam, Brahma Randram stone, (Gandhapu Raie) including cost and conveyance of all materials and labour charges all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Copper Sthoopi - Upto 2'-0" Height (18 to 20 gauge) (SoR- 3.11)

Supply of Granite stones of various sizes for Cut Stone Flooring works and minimum sizes of flooring 12"x24"x4" as directed by the sthapathi. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , operational, incidental charges, overheads and contractor's profit etc., complete. (SoR - 4.410)

Five line Palmana Dressing for hard granite stone not less than 12"x24" uniform size and thickness not lessthan 4" including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR -4.430)

Labout charges for Jointing for hard granite stone & soft variety including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work.- for Cut Stone Flooring works . (SoR-4.470)

Earth work excavation and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means. - Upto 3 M depth

Filling with useful available earth by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Filling with carted gravel by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Providing post construction anti termite treatment by drilling 1/2 inch dia., holes at the edges of wall floor junction and pouring anti termite chemical (Imidacloprid 30.5 SC, 10.5 ml for 5 Liters of water as per IS 16131.) with a hand operated pressure pump until refusal or to a maximum of one liter per hole. Holes shall be sealed with cement motor after treatment and providing spraying and injecting termiticides for treating and applying to doors, windows, frames, removing, crusting treating in Treatment along outside of foundations (i.e.,Soil in contact with external walls around the building and Concrete or Masonry apron around the building), Treatment of soil under floors - Inside Building, Treatment to voids in masonry, Treatment at points of contact of woodwork, Treatment of Wood Work, Treatment of Electrical Fixtures, as directed in IS 6313 Part 3 2013 with preventive chemicals duly taking precautions for health hazards and safety measures for the occupants including all costs, conveyances of all materials and labour charges,overheads and contractors profit etc complete for finished item of work to the satisfaction of the Engineer-in-Charge. The plinth area of the building each floor shall be taken for the purpose of payment.

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for machine mixing, laying concrete in foundations and under flooring bed, finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Footings

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Pedestals

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Plinth Beams

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS. - Columns - un-supported height of 3.66m - Ground Floor

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. - Grade Slab -150mm thk

Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal Panther) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) - Ground Floor

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 1 to 20 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 20 to 40 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 40 to 60 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 60 to 80 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - above -100 Cft

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR- 4.70)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam - UPAPEETAM KAPOTHAKAM (SoR-4.713)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam - ADHISTANA PADMAJAGATHI IN MUKAPATRAM (SoR-4.715)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - STHAMBHAVARGAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam - ROOF STONES (SoR-4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam - CHATURA VATTAM (SoR-4.724)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam - COVERING STONE

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam - STEPS

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - 1 KARNAKOOTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - 1 PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - KANTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - SHIKARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Mandapam - ALLROUND PEETAM - PADMAJAGATHI (SoR - 4.711)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Mandapam - SMALL PILLARS - CHITRA KANTA STAMBAM (SoR- 4.811)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Mandapam - PODIKA - PUSHPA POTHIKA WITH 4 SIDES (SoR - 4.819)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Mandapam - BEAMS -H - ELUDHAKAM INSIDE BEAMS (SoR - 4.725)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Mandapam - BEAMS-V - ELUDHAKAM INSIDE BEAMS (SoR - 4.725)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Mandapam - KODUNGAI - (SoR-4.722)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Mandapam - VYALAM (SoR-4.723)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Mandapam - SALAHARAM - Chola style (SoR-4.822)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - Mandapam - ARCHES

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ROOF STONES (SoR-4.726)

Cost of Tool making Material like Chisels, Charcoal for furnace etc., for palmana dressing for Five line Dressing, including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.910)

Labour charged for Jointing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.913)

Supplying and fixing of scaffolding up to 20'0" ht. including cost and conveyance of all materials such as casurina poles, bamboo mats and coir rope etc., including labour charges, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-7.100)

Hire charges for a capacity of 80 tonnes Crane, including overheads & contractors profit etc. complete for finished item of work. (for Lifting of Stone material etc.,) (R&B - SoR- Hire Charges for Machinery - sl.no-30 a)

Supply of Hard granite stones of various sizes for Garbhalayam and Ardha Mandapam - Door Frame works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Door Frame above 7'-0" Height (SoR- 4.330)

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. for Door Frames in granite stone - Garbhalayam and Ardha Mandapam (SoR- 4.70)

Door Frames - Dressing - Five Line Palmana instead of fine Dressing and polishing and padmams at top & bottom, Nagabhandam on vertical stones all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam and Ardha Mandapam (SoR- 4.340)

Labour charged for fixing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work - for Door Frames in granite stone - Above 7'-0" to 9'-0" Height

Supply of Granite stones of various sizes for Cut Stone Flooring works and minimum sizes of flooring 12"x24"x4" as directed by the sthapathi. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , operational, incidental charges, overheads and contractor's profit etc., complete. (SoR - 4.410)

Five line Palmana Dressing for hard granite stone not less than 12"x24" uniform size and thickness not lessthan 4" including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR -4.430)

Labout charges for Jointing for hard granite stone & soft variety including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work.- for Cut Stone Flooring works . (SoR-4.470)

Providing and Carving Stone Vigrahams - (i.e., Poornachitram with Sarvabharanams, Sarvaayavayams, Padadi Kereethantham) as per the drawings approved by the Sthapathi with Fine Dressing, Polishing, Both Sides Finishing, with Jeeva Rekalu including Cost and Conveyance of Suitable Variety of Black Granite Stone, Chisels, Hammers, All Materials, Labour Charges, all operational, incidental charges, overheads and contractor's profit etc., using partly with machine cutting and remaining manual finishing Complete. - Standing Posture with Four Hands above 2'-0" to 4'-0" Height (SoR-4.514)

Earth work excavation and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means. - Upto 3 M depth

Filling with useful available earth by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Filling with carted gravel by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Providing post construction anti termite treatment by drilling 1/2 inch dia., holes at the edges of wall floor junction and pouring anti termite chemical (Imidacloprid 30.5 SC, 10.5 ml for 5 Liters of water as per IS 16131.) with a hand operated pressure pump until refusal or to a maximum of one liter per hole. Holes shall be sealed with cement motor after treatment and providing spraying and injecting termiticides for treating and applying to doors, windows, frames, removing, crusting treating in Treatment along outside of foundations (i.e.,Soil in contact with external walls around the building and Concrete or Masonry apron around the building), Treatment of soil under floors - Inside Building, Treatment to voids in masonry, Treatment at points of contact of woodwork, Treatment of Wood Work, Treatment of Electrical Fixtures, as directed in IS 6313 Part 3 2013 with preventive chemicals duly taking precautions for health hazards and safety measures for the occupants including all costs, conveyances of all materials and labour charges,overheads and contractors profit etc complete for finished item of work to the satisfaction of the Engineer-in-Charge. The plinth area of the building each floor shall be taken for the purpose of payment.

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for machine mixing, laying concrete in foundations and under flooring bed, finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps.- Footings

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Plinth Beams

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS. - Columns - un-supported height of 3.66m - Ground Floor

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. - Grade Slab - 150mm thk

Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal Panther) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) - Ground Floor

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 1 to 20 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 20 to 40 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 40 to 60 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi)- Cost of stone - 60 to 80 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi)- Cost of stone - 80 to 100 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - Above 100 Cft

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR- 4.70)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. -MANDAPAM - CHITRAVANAM- (Sor- 4.710)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. -MANDAPAM - ALLROUND PEETAM - PADMAJAGATHI (SoR - 4.711)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. -MANDAPAM - INSIDE (SoR - 4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. -MANDAPAM - INSIDE PLANE PEETAM-PADMAJAGATHI (SoR - 4.711)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. -MANDAPAM - SMALL PILLARS - CHITRA KANTA STAMBAM (SoR- 4.811)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. -MANDAPAM - PODIKA - PUSHPA POTHIKA WITH 4 SIDES (SoR - 4.819)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. -MANDAPAM - BEAMS-ELUDHAKAM INSIDE BEAMS (SoR - 4.725)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. -MANDAPAM - ROOF STONES (SoR-4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. -MANDAPAM - KONAVATTAM STONES (SoR- 4.724)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. -MANDAPAM - CHADURAVATTAM (SoR- 4.724)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. -MANDAPAM - ROOF STONES (SoR-4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. -MANDAPAM - KODUNGAI (SoR-4.722)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. -MANDAPAM - VYALAM (SoR-4.723)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. -MANDAPAM - SALAHARAM - Chola style (SoR-4.822)

Cost of Tool making Material like Chisels, Charcoal for furnace etc., for palmana dressing for Five line Dressing, including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.910)

Labour charged for Jointing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.913)

Supply of Granite stones of various sizes for Cut Stone Flooring works and minimum sizes of flooring 12"x24"x4" as directed by the sthapathi. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , operational, incidental charges, overheads and contractor's profit etc., complete. (SoR - 4.410)

Five line Palmana Dressing for hard granite stone not less than 12"x24" uniform size and thickness not lessthan 4" including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR -4.430)

Labout charges for Jointing for hard granite stone & soft variety including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work.- for Cut Stone Flooring works . (SoR-4.470)

Supplying and fixing of scaffolding up to 20'0" ht. including cost and conveyance of all materials such as casurina poles, bamboo mats and coir rope etc., including labour charges, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-7.100)

Hire charges for a capacity of 80 tonnes Crane, including overheads & contractors profit etc. complete for finished item of work. (for Lifting of Stone material etc.,) (R&B - SoR- Hire Charges for Machinery - sl.no-30 a)

Earth work excavation and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means. - Upto 3 M depth

Filling with useful available earth by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Filling with carted gravel by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Providing post construction anti termite treatment by drilling 1/2 inch dia., holes at the edges of wall floor junction and pouring anti termite chemical (Imidacloprid 30.5 SC, 10.5 ml for 5 Liters of water as per IS 16131.) with a hand operated pressure pump until refusal or to a maximum of one liter per hole. Holes shall be sealed with cement motor after treatment and providing spraying and injecting termiticides for treating and applying to doors, windows, frames, removing, crusting treating in Treatment along outside of foundations (i.e.,Soil in contact with external walls around the building and Concrete or Masonry apron around the building), Treatment of soil under floors - Inside Building, Treatment to voids in masonry, Treatment at points of contact of woodwork, Treatment of Wood Work, Treatment of Electrical Fixtures, as directed in IS 6313 Part 3 2013 with preventive chemicals duly taking precautions for health hazards and safety measures for the occupants including all costs, conveyances of all materials and labour charges,overheads and contractors profit etc complete for finished item of work to the satisfaction of the Engineer-in-Charge. The plinth area of the building each floor shall be taken for the purpose of payment.

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for machine mixing, laying concrete in foundations and under flooring bed, finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Footings

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Pedestals

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Plinth Beams

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS. - Columns - un-supported height of 3.66m - Ground Floor

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. - Grade Slab -150mm thk

Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal Panther) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) - Ground Floor

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 1 to 20 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 20 to 40 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 40 to 60 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 60 to 80 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - above -100 Cft

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR- 4.70)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam - UPAPEETAM KAPOTHAKAM (SoR-4.713)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam - ADHISTANA PADMAJAGATHI IN MUKAPATRAM (SoR-4.715)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - STHAMBHAVARGAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam - ROOF STONES (SoR-4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam - CHATURA VATTAM (SoR-4.724)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam - COVERING STONE

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam - STEPS

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - 1 KARNAKOOTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - 1 PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - KANTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - SHIKARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Mandapam - ALLROUND PEETAM - PADMAJAGATHI (SoR - 4.711)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Mandapam - SMALL PILLARS - CHITRA KANTA STAMBAM (SoR- 4.811)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Mandapam - PODIKA - PUSHPA POTHIKA WITH 4 SIDES (SoR - 4.819)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Mandapam - BEAMS -H - ELUDHAKAM INSIDE BEAMS (SoR - 4.725)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Mandapam - BEAMS-V - ELUDHAKAM INSIDE BEAMS (SoR - 4.725)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Mandapam - KODUNGAI - (SoR-4.722)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Mandapam - VYALAM (SoR-4.723)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Mandapam - SALAHARAM - Chola style (SoR-4.822)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - Mandapam - ARCHES

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ROOF STONES (SoR-4.726)

Cost of Tool making Material like Chisels, Charcoal for furnace etc., for palmana dressing for Five line Dressing, including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.910)

Labour charged for Jointing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.913)

Supplying and fixing of scaffolding up to 20'0" ht. including cost and conveyance of all materials such as casurina poles, bamboo mats and coir rope etc., including labour charges, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-7.100)

Hire charges for a capacity of 80 tonnes Crane, including overheads & contractors profit etc. complete for finished item of work. (for Lifting of Stone material etc.,) (R&B - SoR- Hire Charges for Machinery - sl.no-30 a)

Supply of Hard granite stones of various sizes for Garbhalayam and Ardha Mandapam - Door Frame works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Door Frame above 7'-0" Height (SoR- 4.330)

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. for Door Frames in granite stone - Garbhalayam and Ardha Mandapam (SoR- 4.70)

Door Frames - Dressing - Five Line Palmana instead of fine Dressing and polishing and padmams at top & bottom, Nagabhandam on vertical stones all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam and Ardha Mandapam (SoR- 4.340)

Labour charged for fixing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work - for Door Frames in granite stone - Above 7'-0" to 9'-0" Height

Supply of Granite stones of various sizes for Cut Stone Flooring works and minimum sizes of flooring 12"x24"x4" as directed by the sthapathi. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , operational, incidental charges, overheads and contractor's profit etc., complete. (SoR - 4.410)

Five line Palmana Dressing for hard granite stone not less than 12"x24" uniform size and thickness not lessthan 4" including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR -4.430)

Labout charges for Jointing for hard granite stone & soft variety including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work.- for Cut Stone Flooring works . (SoR-4.470)

Providing and Carving Stone Vigrahams - (i.e., Poornachitram with Sarvabharanams, Sarvaayavayams, Padadi Kereethantham) as per the drawings approved by the Sthapathi with Fine Dressing, Polishing, Both Sides Finishing, with Jeeva Rekalu including Cost and Conveyance of Suitable Variety of Black Granite Stone, Chisels, Hammers, All Materials, Labour Charges, all operational, incidental charges, overheads and contractor's profit etc., using partly with machine cutting and remaining manual finishing Complete. - Standing Posture with Four Hands above 2'-0" to 4'-0" Height (SoR-4.514)

Earth work excavation and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means. - Upto 3 M depth

Filling with useful available earth by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Filling with carted gravel by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for machine mixing, laying concrete in foundations and under flooring bed, finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Footings

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Plinth Beams

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS. - Columns - un-supported height of 3.66m - Ground Floor

Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal Panther) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) - Ground Floor

Earth work excavation and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means. - Upto 3 M depth

Filling with useful available earth by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for machine mixing, laying concrete in foundations and under flooring bed, finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Footings

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS. - RCC walls 375mm thk - un-supported height of 3.66m - Ground Floor

Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal Panther) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) - Ground Floor

Supply of Granite stones of various sizes for Cut Stone Flooring works and minimum sizes of flooring 12"x24"x4" as directed by the sthapathi. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , operational, incidental charges, overheads and contractor's profit etc., complete. (SoR - 4.410)

Five line Palmana Dressing for hard granite stone not less than 12"x24" uniform size and thickness not lessthan 4" including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR -4.430)

Labout charges for Jointing for hard granite stone & soft variety including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work.- for Cut Stone Flooring works . (SoR-4.470)

Earth work excavation and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means. - Upto 3 M depth

Filling with useful available earth by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Filling with carted gravel by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for machine mixing, laying concrete in foundations and under flooring bed, finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Footings

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Plinth Beams

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS.- Columns - un-supported height of 3.66m - Ground Floor

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. - Grade Slab -150mm thk

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. - Beams - un-supported height of 3.66m - Ground Floor

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. - Slab - 150mm thk - un-supported height of 3.66m - Ground Floor

Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal Panther) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) - Ground Floor

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 20 to 40 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 40 to 60 Cft

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR- 4.70)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ALLROUND PEETAM - PADMAJAGATHI (SoR - 4.711)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SMALL PILLARS - CHITRA KANTA STAMBAM (SoR- 4.811)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - PODIKA - PUSHPA POTHIKA WITH 4 SIDES (SoR - 4.819)

Cost of Tool making Material like Chisels, Charcoal for furnace etc., for palmana dressing for Five line Dressing, including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.910)

Labour charged for Jointing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.913)

Supplying and fixing of scaffolding up to 20'0" ht. including cost and conveyance of all materials such as casurina poles, bamboo mats and coir rope etc., including labour charges, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-7.100)

Hire charges for a capacity of 80 tonnes Crane, including overheads & contractors profit etc. complete for finished item of work. (for Lifting of Stone material etc.,) (R&B - SoR- Hire Charges for Machinery - sl.no-30 a)

S&F premium make CPVC Pipes - SDR13.5, including the cost of pipe & its fittings & labour charges complete including cost and conveyance of all materials to site, all operational, incidental, labour charges, cost of overheads & contractor profit etc.complete for finished item of work as directed by Engineer-in-charge - 28.60mm OD Pipe - SDR 13.5

S&F premium make CPVC Pipes - SDR13.5, including the cost of pipe & its fittings & labour charges complete including cost and conveyance of all materials to site, all operational, incidental, labour charges, cost of overheads & contractor profit etc.complete for finished item of work as directed by Engineer-in-charge - 34.90mm OD Pipe - SDR 13.5

Supplying, laying and jointing Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete, with necessary excavation in all types of soils (except rock requiring blasting) refilling and making good the walls and floors to the original surface, fixing M.S. clamps and T.W. block on walls wherever required, including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit, etc. complete for finished item of work as directed by Engineer-in-charge. - 50 mm Nominal Bore

S & F 65 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 with GI fittings such as elbows tees couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for GI bends union and GI connectors with checkout and socket Tata or Zenith make or equivalent, with necessary excavation in all types of soils (except rock requiring blasting) refilling and making good the walls and floors to the original surface, fixing M.S. clamps and T.W. block on walls wherever required, including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit, etc. complete for finished item of work as directed by Engineer-in-charge. - 65 mm Nominal Bore

S & F Bronze Gate/ Globe valve as per IS - 778 Class - I,Indian make heavy type as approved by the Engineerin-charge including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit, etc. complete for finished item of work in all floors as directed by Engineer-in-charge. - 50 mm dia

S&F of 15 mm brass body CP finish long body bib tap of not less than 400 grams weight with quarter turn spindle internal / external threaded connection conforming to IS 8931, including cost and conveyance of all materials to site, all operational, incidental, labour charges, overheads and contractor's profit, etc. complete for finished item of work.

Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks, including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit etc. complete for finished item of work.

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes Pipe with Spigot & Pin Type with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete, including all incidental, labour charges, overheads and contractor's profit, etc. complete for finished item of work. - NP-2 Class 150mm dia pipe

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes Pipe with Spigot & Pin Type with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete, including all incidental, labour charges, overheads and contractor's profit, etc. complete for finished item of work. - NP-2 Class 200mm dia pipe

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes Pipe with Spigot & Pin Type with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete, including all incidental, labour charges, overheads and contractor's profit, etc. complete for finished item of work. - NP-2 Class 250mm dia pipe

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes Pipe with Spigot & Pin Type with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete, including all incidental, labour charges, overheads and contractor's profit, etc. complete for finished item of work. - NP-2 Class 300mm dia pipe

Earth work excavation and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means. - Upto 3 M depth

Filling with useful available earth by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for machine mixing, laying concrete in foundations and under flooring bed, finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING

Vibrated reinforced cement concrete M 20 grade concrete using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) including cost, (excluding seigniorage) conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per MoRT&H specification 1500,1600,1700 & 2200 (5th revision ) and as directed by the Engineer-in-Charge for foundation and side walls.

Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal Panther) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126)

Supplying and fixing of MS Grills over Storm water drain including fabrication and erection in position using MS angles/flats etc., including cost and conveyance of all materials to work site, all operational, incidental Labour charges for fabrication, cost of welding rods, power charges, cost of fixing in position, overheads & contractors profit etc., complete for finished item of work.

Painting to new iron works with 2 coats of Synthetic Enamel paints in all shades using ready mixed Synthetic Enamel in all shades Grade - I / Polyurethane full gloss Enamel (IS - 13213) paints having VOC (Volatile Organic Compound) content less than 30 grams/ Lit. over 1 coat of Red Oxide Primer Paint for iron works of Grade -1 of approved brand to give an even shade after thoroughly cleaning and sand papering the surface to remove all dirt and remains , including cost and conveyance of all materials to work site including cost of primer coat and all operational, incidental, labour charges etc. complete etc., complete including cost of overheads & contractors profit (APSS No.1200, 1207 & 1211) in all floors.

Supply and Laying of ISI 25mm outer dia heavy grade with IS:9537 part 3 rigid PVC pipe concealed in Roof Slabs with all required Metallic Deep Boxes including masonary work and labour charges etc., complete. Makes : Sudhakar / VIP / Precision

Supply and laying of ISI 25mm outer dia medium grade with IS:9537 part 3 rigid PVC pipe consealed in wall with Metallic junction boxes and all required accessories including masonary work for light, fan and separate plug point with supply and fixing of suitable size Metal Modular deep box including all labour charges etc., complete. Makes : Sudhakar / VIP / Precision

Supply and laying of ISI 25mm outer dia medium grade with IS:9537 part 3 rigid PVC pipe consealed in wall with all required Metallic Junction Boxes including masonary work and labour charges etc., complete for Run of mains. Makes : Sudhakar / VIP / Precision

Wiring with run of 2 of 1.5 Sqmm Class II conductor HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS17048 specification for Copper cable make in existing consealed pipe, ferrules including supply and fixing of 3 Plate Jumbo Ceiling rose/batten holder of Anchor / Gold Medal Olive / Million Zoom make and 6A/10A ISI marked Modular type switch including cost and conveyance of all material and all labour charges etc., complete for light and bell points in N.R.B. Wire Makes: Finolex / RR kabel / Havells Accessories Makes : Legrand Lyncus / GM Four Five / Goldmedal Curve / Anchor Roma Plus /Crabtree Verona

Wiring with run of 3 of 1.5 Sqmm Class II conductor HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS17048 specification for Copper cable make in existing consealed pipe,ferrules including supply and fixing of 3 Plate Jumbo Ceiling rose of Anchor / Gold Medal Olive / Million Zoom make and 6A/10A ISI marked Modular type switch including cost and conveyance of all material and all labour charges etc., complete for fan and exhaust fan points in N.R.B. Wire Makes: Finolex / RR kabel / Havells Accessories Makes : Legrand Lyncus / GM Four Five / Goldmedal Curve / Anchor Roma Plus /Crabtree Verona

Supply and fixing of ISI Marked 6A/ 10A 3 Pin 2 Module Modular Socket with shutter with 6A/10A 1way Modular switch on a common switch board Module box with cover frame with connections including cost and conveyance of all materials and all labour charges etc., complete in N.R.B. / R.B. Makes of Modular box and Switches:Legrand Lyncus/GM Four Five/Gold Medal Curve/Anchor Roma Plus/Crabtree Verona

Wiring with run of 3 of Supply of 1.5 Sqmm Class II conductor HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS17048 specification for Copper cable in existing conseled PVC pipe,frrules including Supply and fixing of ISI Marked 6A/ 10A- 3/2 pin Modular socket with shutter, 6A/10A 1way Modular switch with required cover frame including connections, cost and conveyance of all material and all labour charges etc., complete for seperate plug points in N.R.B. / R.B. Wire Makes: Finolex / RR kabel / Havells Makes of Modular box and Switches:Legrand Lyncus/GM Four Five/Gold Medal Curve/Anchor Roma Plus/Crabtree Verona

Supply and fixing of ISI marked 16A/6A 1 way Combi Socket Modular Socket with shutter, 16A / 20A 1 Way 1 Module Modular Switch on a 3 Modular box with suitable cover frame with connections including cost and conveyance of all material and all labour charges etc., complete in N.R.B. / R.B. Makes of Modular box and Switches:Legrand Lyncus/GM Four Five/Gold Medal Curve/Anchor Roma Plus/Crabtree Verona

Supply and Run of 3 of 2.5 Sqmm Class II conductor HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS 17048 specification for Copper cable. in existing pipe for run of mains inlcuding connections and all labour charges etc., complete. Wire Makes: Finolex / RR kabel / Havells

Supply and Run of 3 of 4.0 Sqmm HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS 17048 specification for Copper cable in existing pipe for run of mains inlcuding connections and all labour charges etc., complete. Wire Makes: Finolex / RR kabel / Havells

Supply and Run of 3 of 6.0 Sqmm HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS 17048 specification for Copper cable in existing pipe for run of mains inlcuding connections and all labour charges etc., complete. Wire Makes: Finolex / RR kabel / Havells

Supply and Run of 5 of 6.0 Sqmm HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS 17048 specification for Copper cable in existing pipe for run of mains inlcuding all labour charges etc., complete. Wire Makes: Finolex / RR kabel / Havells

Supply and Run of 5 of 10.0 Sqmm HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS 17048 specification for Copper cable in existing pipe for run of mains inlcuding all labour charges etc., complete. Wire Makes: Finolex / RR kabel / Havells

Supply, transportation and fixing of 18 W +/-10% (>= 1800 Lumens) back lit LED Down Light Recessed / Surface mounting round / square with housing made of Powder coated Pressure die cast aluminium housing with extended heat sink, with Protruded high efficiency diffuser, IP20, with wide operating voltage range, Power factor > 0.9, Surge protection: > 2KV, System efficacy of >100 lumens/watt, CCT: 3000K - 6500K as desired by the department and as per IS, CRI >80, and THD is less than 15% etc., complete with 5 years warranty with BIS Certification. LUMINAIRE MAKE : Phillips / Wipro / Crompton / Havells / Jaquar / Panasonic LED MAKE : PHILIPS LUMILEDS / CREE /NICHIA / OSRAM /SAMSUNG / LG LEDs.

Supply ,transportation and fixing of 22W +/ 10% , >/ 2300 lumens, 1200 mm (+/- 10%) length LED light housing made with alluminium anodised body, wide operating voltage with PF≥0.9, Surge protection: > 2KV, THD<10%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department as per IS, minimum CRI≥80 etc., complete with 5 years warranty with BIS Certification with BIS Certification. LUMINAIRE MAKE : Phillips / Wipro / Crompton / Havells / Jaquar / Panasonic LED MAKE : PHILIPS LUMILEDS / CREE /NICHIA / OSRAM /SAMSUNG / LG LEDs.

Supply, Transportation and Fixing of energy efficient fan, 1200 mm sweep, aluminium body, consuming 28 W, BEE 5 star rated, ceiling fan with Brush Less Direct Current(BLDC)motor, class of insulation: B, 3 no's blades, 30 cm long down rod, 2 no's canopies, shackle'kit, copper winding, Power Factor greater than 0.90, Service Value (CMMAV) greater than 8.0, Air delivery minimum 235 CMM, 350 RPM( tolerance as per IS:374-2019), THD less than 10%. with remote or compatible to electronic step type regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C(max), insulation resistance more than 2 mega ohm, suitable for 230V, 50 HZ, single phase AC supply, earthing etc., including all standard accessories etc., complete. Makes : Atomberg (Efficio ) / Havells / Orient as approved by the Department. Makes : Atomberg (Efficio ) / Havells / Orient

Supply and fixing of 2 Module Modular type Electronic step type Fan Regulator with connections and Labour charges etc complete. Accessories Makes : Legrand Lyncus / GM Four Five / Goldmedal Curve / Anchor Roma Plus /Crabtree Verona / Panasonic Vision

Supply and fixing 6 Way TPN DB Horizontal with IP 43 Protection as per IS:13032 and suitable for 1 No 4 pole Incomer of 63A FP Isolator and 18No. 6-32A 10kA ISI Marked C/D Curve SP MCBs with 100 A tinned copper busbar, neutral bar, earth bar and cable ties for cable management, fully shrouded neutral bar, profile blanking modules for unused MCB ways, din bars and detachable gland plate etc complete with inter connections and labour charges for Flush Mounting etc., complete. DB Makes :Legrand Isolator Makes : Legrand-DX3 / Schneider-Acti9 MCB Makes : Legrand-DX3 / Schneider-Acti9

Supply and fixing 8 Way SPN DB Horizontal with IP 43 Protection as per IS:13032 and suitable for 1 No 2 pole Incomer of 32A DP Isolator and 2No. 6-32A 10kA ISI Marked C/D Curve SP MCBs with 40 A tinned copper busbar, neutral bar, earth bar and cable ties for cable management, fully shrouded neutral bar, profile blanking modules for unused MCB ways, din bars and detachable gland plate etc complete with inter connections and labour charges for Flush Mounting etc., complete. DB Makes :Legrand Isolator Makes : Legrand-DX3 / Schneider-Acti9 MCB Makes : Legrand-DX3 / Schneider-Acti9

"Supply and fixing of DB with 1 No 20A single phase plug and Socket, in sheet steel enclosure with 1 No 10A to 20A 10 KA ISI Marked C/D curveSP MCB including internal connection and labour charges for Flush Mounting etc., complete. DB Makes :Legrand MCB Makes : Legrand-DX3 / Schneider-Acti9

Supply and Run of LAN Cable cat - 6 UTP cable of makes D Link / AMP / Molex / Legrand / Krone / Finolex / Polycab in existing pipe inlcuding all labour charges etc., complete as desired by the department (derived from Sd 3.1.2) Makes : D Link / AMP / Molex / Legrand / Krone.

Supply and fixing of Cat 6 RJ-45 information outlets including duel face plate of makes D Link / AMP / Molex / Legrand / Krone on required size Modular Box with cover frame with connections including cost and conveyance of all material and all labour charges etc., complete in N.R.B. Makes : D Link / AMP / Molex / Legrand / Krone.

Supply, installation, testing and commissioning of IP Based digtal Telephone (EPABX) system --- --complied with following specifications: > IP @ Core, PCM/TDM, Non blocking, > Must Support PRI, E1, Analog Junctions > Must Support PC Console, > Must support Mobile SIP (Android and I.O.S) > Must support Voice Mail > Must support Card based GSM > Inbuilt Call Details Software with search engine software > 4 Analog Trunks > 6 Digital Extensions > 48 Analog Extensions > 1 Digital Key Phone with minimum 16 Keys (Must work only on 2 wires) > Expandable to 64 Analog Extensions or more Approved Brands: NEC/ Alcatel/ Karel/ Unify

Supply and run of 2 pair telephone cable 0.5mm copper, in the existing PVC pipe including all labour charges etc complete. Makes : Finolex / Delton / Surabi / Polycab

Supply and run of 20 Pair telephone Copper wire., in the existing PVC pipe including all labour charges etc complete. Makes : Finolex / Delton / Surabi / Polycab.

Supply of 20 pair Telephone distribution box with back mount frame, krone connector, powder coated metal body with lock and key arrangement.

Digital Key Telephone with 2 line display, 10 programmable keys, handsfree dialing

Supply and fixing of Modular socket type Telephone jack with Connector on required size Modular Box with cover frame with connections including cost and conveyance of all material and all labour charges etc., complete in N.R.B. Accessories Makes : Legrand Lyncus / GM Four Five / Goldmedal Curve / Anchor Roma Plus /Crabtree Verona / Panasonic Vision

Supply and fixing of 7 feet length moulded patch cord including accessories and all labour charges etc complete. Makes : D Link / AMP / Molex / Legrand / Krone. Makes: Digisol / TP Link / D link. / Legrand

Supply and fixing of 3 feet length moulded patch cord including accessories and all labour charges etc complete. Makes : D Link / AMP / Molex / Legrand / Krone. Makes: Digisol / TP Link / D link. / Legrand

Supply, Installation, Testing and Commissioning of 24 Port, 4 GIGA fibre slots (SFP), power budget 250 W 10 / 100 / 1000 Gigabit PoE switchwith GIGA fibre slots (SFP). Makes : Digisol / TP Link / D link

Supply and fixing of 24 port patch panelswith IO Separate including accessories and all labour charges etc complete. Makes : D Link / AMP / Molex / Legrand / Krone. Makes: Digisol / D Link / Legrand / TPLink

Supply and installation of 9U wall 600 mm width x 500 mm depth UL certified wall mounting net work rack with sheet steel revited metal frame,top and bottom cover with brush cable entry,confirming to following standards IEC 60529,EN 60529 ( IP 20), IEC 62262 EN 62622 (IK08) , DIN 41494, EIA 310, IEC 60927 including all accessories like horizontal PDU, metal cable manager, hardware packet and the cantilever shelf etc.,complete. Makes : Vallrack (Legrand) / Netrack.

Supply, Transportation and installation of 10.0KVA , 72VDC / 96V DC true on line UPS system IGB technology pure sine wave out put, with double conversion with auto and manual static by pass switch single phase input / Single phase output. Makes: APC / Numeric / Emerson / Fuji Electric

Supply and fixing of 12V 65 AH SMF battery including wire leads Makes : Quanta / Racket / Exide.

Supply and providing of UPS cum battery rack 5 to 10 batteries

Supply , Fabrication, Transportation and fixing of Box type RS Joist pole made with 2 Nos 175X85 mm ( ISMB Modified ) or equivalent about 30'-0 length / 9.1 mtrs length poles welded together including excavation of pit, coil earthing, Special T&P, painting of Pole with 1 coat of Red oxide and 2 coats of alluminium paint, CC 1:3:6 upto ground and 1:2:4 for Couping work, 200A AB Switch, HG fuse sets, required angle iron channels, clamps, nuts and bolts, 11KV pin insulators, 2Nos GI pipe earthings as per the IS with brick massonry chamber including labour and transportation charges etc., complete.

Supply, transpotation, installation, testing and commissioning of HT INDOOR type single panel switchgear with VCB of floor mounted, metal clad 11KV, 630A, not less than 16 KA (350 / 500MVA) VCB Panel, with 1No VCBs totally enclosed and horizantal drawout type, horizontal isolation type breaker as per IS 13118 as amended upto date and additional specifications having capacities as mentioned below , single break trip free mechanism, motorised/manually charged and auto manually closing breaker suitable for use on 12KV, 3phase, 50HZ AC supply with self contained fully interlocked rackin and rackout mechanism air insulated allumium Busbars of 630A capacity, Breaker featured with ON/OFF indicator with hand trip device, spring relief coil, shunt trip coil and auxillary switch of 6NO + 6NC and equiped with following switchgears and accessories incomming connections suitable for 3x95Sqmm XLPE 11KV Cable as required etc complete with adaptor box for outgoing termination.Makes: Kirloskar / Schneider / Siemens / Crompton Greaves / ABB INCOMING : 11KV, 630A,not less than ----- KA VCB - 1No. Microprocessor based non directional combined 2 over current & one earth fault relay -1No Makes: EASUN REYROLLE or equivalent POWER PACK: Supply, Installation, testing and commissioning of Power pack with 230V input and 110V DC continuous out put suitable for closing / tripping / indication of VCB with 2.5sqmm FRLS copper cable etc as required. Master trip relay-1No Makes: EASUN REYROLLE or equivalent (Makes) Three element transformer fault auxilary relay - 2 Nos Makes: EASUN REYROLLE or equivalent Breaker control switch-1No Makes: Switron or equivalent Local / Remote switch-1No Makes: Switron or equivalent Indicating lamps-1set Makes: Vaishnov or equivalent Reputed brand Space heater & thermostat -2Nos Makes: Eltek or equivalent MCB's of suitable current rating - 3 Nos Anti pumping relay -1No Makes: Reputed brand with ISI mark Electrionic Audio alarm system with hooter-1No Makes : Reputed brand Auxiliary plug & socket of 230VAC/10A -1No Makes: Reputed brand with ISI mark Panel illumination lamp 230V/40W - 1No Makes: Reputed brand with ISI mark Note 3 : If it is a outdoor braker, add 10% extra on above HT Indoor panel. POTENTIAL TRANSFORMER:1 No. 11000 / 110 Volts PT, Class 1 accuracy, 100 VA burden with HT/LT fuses. Makes: ECS / SILKANS / PRAGATHI / NARAYAN POWER TECH or EQVT - 1 No Digital Voltmeter 0-15KV along with Selector switch and protection fuses/MCB for HT metering upto 15KV on incoming side -1No Makes: CONZERV / ELMEASURE or EQVT Dual core dual ratio Current transformers with 50 -- 300 A / 5 amp, 15VA burden and accuracy class 1 for metering & class 5P10 for protection of makes ECS / SILKANS / PRAGATHI / NARAYAN POWER TECH -3Nos 0-300A Digital Type Ammeter with selector switch -1No Makes : CONZERV / ELMEASURE or EQVT

Supply, Transportation, Installation, Testing and Commissioning of 315KVA TRANSFORMER with all test reports. The Transformer shall be designed and manufactured as per IS:1180 OCTC with level-I with initial filling of oil as per IS 335-1993. The basic details of the Transformer are as under. Makes: Kirloskar / PETE / Esennar / Voltamp / Crompton / ABB / Schneider/SSE

1. Quantity : 1 2. Rated KVA : 315KVA 3. Service & Location: Continuous Outdoor Distribution Transformer 4. Mounting : Plinth. 5. Wound : Copper Double wound 6. Type : Core type oil immersed 7. Cooling :ONAN 8. Temp Rise : 40⁰C in oil, 45⁰C by resistance 9. Vector Group: Dyn 11 10. Primary Connection : Delta 11. Nominal Voltage / Current : 11KV/26A 12. Highest system Voltage: 12000V 13. Primary Frequency : 50 HZ +/- 3% 14. Number of Phases : 3 15. Primary wires: 3 16. Secondary connection : Star 17. Secondary Volts / Current : 415V 18. Secondary phases : 3 19. Secondary wires: 4 20. Taps on primary winding for primary voltage variation : +5% to - 10% in steps of 2.5% of 7 position (6 Steps)

21. Terminal arrangement. a.HV: HT terminal box as per the siteCondition. b. LV: Cable box suitable to receive 300 Sq.mm XLPE cable 22. LV:One separate terminal for earthing. 23. Total Losses at 50% Loading [Watts] [Max] as per IS 24. Total Losses at 100% Loading [Watts] [Max] as per IS 25.Percentage Impedance at 75 deg. C at 5 as per IS (As per Design ) 26. No Load current: Less than 2% of full load current.

27. Standrad Fittings & Accessories. a. Rating and terminal marking plate: One b. Lifting Lugs:Two c. Off-circuit tap switch :One d. Earthing Terminals :Two e. Radiators ( Attachable):Adequate f. Explosion vent with Diaphragm :One g. Conservator with Drain plug:one h. Oil filling hole with cap :One i. Oil level indicator : One j. Dehydrating Silicagel Breather : One k. Terminal Arrangement: HV With Treminal Box l. Terminal Arrangement : LV Cable Box m. Separate Neutral Bushing : One n. Filter valve with blanking plate : One o. Drain cum filter valve with blanking plate : One p. Air release device : One q. Thermometer Pocket : One r. Four :Unidirectional flat rollers s. One :10Cm dial thermometer(Rigid stem type)

125KVA DG SET WITH AMF PANEL Supply, Transportation, erection and commissioning (Excluding Foundation) of 3 Phase, 415, 50Hz, water cooled multi cylinder diesel generator set with alternator of 125 KVA/ - - - - - KW out put continuous rating directly coupled Engine, Alternator and radiator with guard and mounted on a common base frame of Robust construction and complete with AMF control panel having IP-52 protection, anti vibration mounts of reputed make, Acoustic Enclosure as per CPCB norms IV, sound absorbing material to restrict sound level up to 75 dB up to 1 mtr distance and etc as per the following specifications mentioned.

A. Alternator : Kirloskar / Stamford / Crompton Greaves / Leroy Somer make. The alternator of the output rating shall be 3 Phase, 415V, 50Hz, Ac , 0.8 P.F. lagging at 1500 RPM. The alternator is self excited, self regulated, and shall confirm to IS: 13364 of 1992 with regulation of +5% from no load to full load. degree of protections shall be IP21.

B.Diesel Engine : Kirloskar / Cummins / Mahindra & Mahindra / Greaves Cotton Diesel Engine start, developing suitable -------------- BHP output at 1500 RPM with mechanical / electronic governing so as to enable the alternator to give 160KVA continuous output at 0.8 P.F. lagging at NTP conditions. The diesel engine shall be capable of providing 10% O/L for 1 Hr for every 11 Hrs of continuous running at full load. The engine with 1st filling of oil and Diesel etc. 01. Exhaust pipe of required size as per the standards. 02. Diesel tank suitable for 8 to 12 Hours running capacity. 03. Residential Silencer. 04. SMF Batteries with leads as per the Manufacturer standards

C. AMF Control Panel:- AMF control panel shall be fabricated with 16SWG CRCA sheet shall be totally enclosed with dust and Vermin proof, floor mounted / wall mounted type and shall be comprising the following. 01. Voltmeter with selector switch. 02. 4Pole MCCB incomer of ----------A rating of Schenieder / LK make for EB and DG. 03. Ammeter with selector switch with CTs. 04. PF Meter and frequency Meter. 05. Indicator lamps (set Run, Load ON) with fuses. 06. KWH Meter of required rating. 07. Set of control fuses and current transformer. 08. Input Terminal board and output Terminal Board. 09. Battery charger with transformer rectifier unit. 10. Alternator supply air break contactor of LK make. 11. Main supply air break contactor of LK make. 12. Audio Visual announciation . 13. Main supply voltage set of control relays and timers with one mode selector switch, set of push buttons. 14.Control cable up to 15 Mtrs 2.5Sqmm 6 Core

Providing independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 19mm dia 'B' class G.I pipe of 0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in C.C/ brick massonry chamber of 450m x 450m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder from the bottom of the pipe giving earth connection from electrode through G.I strip of 40 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II)

Providing independent earthing by exacavating a pit to a depth of 2.25Mtr in all soils as per size specified in the data for Sophisticated Electronic equipment with 600mm x 600mm x 3.15mm thick copper plate rigidly fixed to 19mm dia 'B' Class G.I Pipe of 2.5Mtr lengthwith funnel as per National Electric Code and earth connection from electrode GI strip of 40mm x 5mm x 200mm length to be bolted with nut bolts to G.I.pipe including 25mm x 3mm copper strip of 6Mtrs length connected from plate to GI strip including filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder from the bottom of the pipe and providing CC / Brick massonry chamber 450mmX450mmX400mm and covered with R.C.C. Slab including all accessories and labour charges etc complete as per IS specification 732/1982 (Part II).

Providing earth electrode of low carbon steel rod, UL listed of 25 mm dia, 3 Mtr long, coated with copper of 254 microns thickness, CPRI tested for short time current withstand test of 25 kA, coating thickness, environmental test (Salt Mist Test), Bend test, Tensile strength, Yield / tensile ratio, Electrical Resistivity test, complete with clamps and 2 bags of Earthplus ULTRA high grade earthing compound IEC 62561-7 complaint Eco-friendly, Maintenance free, anti corrosive, lead free, super conductive, mineral based high-grade earthing compound, to enhance soil conductivity. With resistance <0.20 ohms-meter, should be leach proof & sulphur free complete with earth inspection chamber of dimensions : Width : 320 mm x 320 mm, Height : 192 mm, Weight : 30 Kgs, Load bearing capacity : 5000 Kgs including drilling of bore in any kind of soil.

Supply and Run of 25mm x 6mm G.I Strip including cost of all accessories and labour charges etc., complete. (1.18Kgs/1Mtr)

Supply and Run of 50.mm x 6mm copper strip including cost of all accessories and labour charges etc., complete.

Supply and Run of 50mm x 6mm G.I Strip including cost of all accessories and labour charges etc., complete. (2.36Kgs/1Mtr)

Supply and Run of No.8 SWG G.I wire including cost of all accessories and labour charges etc., complete. (0.104Kgs/1Mtr)

MAIN POWER PANEL Supply, installation, testing and commissioning of floor mounting type panel board with Alluminium bus bars fabricated with 14/16 Gauge CRCA Sheet comprising of TPN bus bars of equal size in all phases and neutral equipped with bus bar chambers and cable chambers.The bus bars fault level shall be 50 KA and shall be as per the requirement of local CEIG, fire regulations, CPRI norms and other authorities etc. The painting of the complete system shall be powder coated duly processing the panel in 7 tank process. The panel shall be suitable for accomdating the following switch gear including supply of all components, hard wares etc including all necessary civil works, adequate reinforcement, foundation bolts, suitable G.I earth strip 40 x 6mm, door loop earthings, bus bars should be colour sleeved with heat shrinkable sleeves for phase and neutral duly supported at regular intervels by SMC supports and all cables shall have proper cable entry, danger board, feeder identification marks, rigid inter connections, cadmium plated bolts and nuts and shall be installed on flooring and consisting of the following as required and as per IS standards for [MAIN PANEL] Panel shall be manufacture only from CPRI approval Fabricators.

630A Alluminium Bus Bar with colour coded sleeves.(1.2A/Sqmm).

Internal wiring with approved make cable

Earthing Flat: Providing suitable G.I Flat

Supply of 630A 4 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 35/36 KA with thermal magnetic release Panel Mounted.-2 Nos.

Makes : Siemens / L&T / Schneider

Supply and Fixing of fully enclosed 630A 4pole Automatic Transfer Switch (ATS) confirming to IEC 60947- 6-1 utilization cat AC 330 prewired with flexible settings and seemless transfer between two power sources. The enclosure made of powder coated of necesssary size. The switch comprising of Electricity Board / Diesel Generator priority Source selection, adjustable time delay 100ms, Ductable break contact system offering high short time withstand (ICW) with necessary terminal shrouds, phase barriers and source separators, protections of under voltage / over voltage, phase sequence, single Phrasing, frequency variation. There should be sufficient space for cable termination. Three phase, 415V capability to expand with RS 485 communication module, which ensures real time communication of data. Makes : Socomec / LK - 1No

Supply and erection of 0-500V volt Digital meter of size 96x96mm on exisiting box / panel board including connections etc., complete.- 2 Nos

MAKES : CONZERVE / ELMEASURE / L&T / SEIMENS / HPL.

Supply and erection of 0-400A Digital Ammeter of size 96x96mm on existing box / panel board including connections etc., complete. -2 Nos

MAKES : CONZERVE / ELMEASURE / L&T / SEIMENS / HPL.

Supply and erection of selector switch for Ammeter on the existing box / panel including connections etc., complete. - 2 Nos

Makes : L&T / C&S / SALZAR / HPL MAKE.

Supply and erection of selector switch for voltmeter on the existing box / panel including connections etc., complete. - 2 Nos

Makes : L&T / C&S / SALZAR / HPL MAKE.

Supply and erection of LED indication lamps on the existing panel board. - 6 Nos

Makes : L&T / C&S / SALZAR / HPL MAKE.

Supply and erection of LT current transformer with bar primary 800 / 5A ratio in the existing panel including connections etc., complete. - 6 Nos

Supply of 250A 3 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 36/35 KA with thermal magnetic release Panel Mounted.-4 Nos.

Makes : L&T / Schneider / Siemens / Legrand / Hager.

Supply of 125A 3 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 25 KA with thermal magnetic release Panel Mounted.-4 Nos

Makes : L&T / Schneider / Siemens / Legrand / Hager.

Supply of 50-63A 10KA TP MCB, C/D Curve ISI Mark.-9Nos

Makes : Legrand-DX3 / Schneider-Acti9 / Siemens / LK (L&T) Exora / Crabtree / Indo Asian / BCH

Supply of 6-32A 10KA TP MCB, C/D Curve ISI Mark.-20Nos

Makes : Legrand-DX3 / Schneider-Acti9 / Siemens / LK (L&T) Exora / Crabtree / Indo Asian / BCH

Control wiring for ACBs, MCCBs, Metering, Control MCB, Bus bar Links, Cable Managers, Terminal Blocks, Rotary Handles and Spreader links etc., including Labour charges for errection of switch gears, panels boards including all labour charges etc with connections for finished items of works including transportation charge.

APFCR Panels(125 KVAR) Supply installation testing and commissioning of 3 phase and neutral 415V free standing floor mounted 70 KVAR APFC panel made out of No.16 gauge CRCA sheet steel after 7 tank process and painting with powder coating. The panel shall consists of suitable spider links/bus bar links rating TPN Alluminium busbar ( with rating of 0.8A/ Sqmm) supported with DMC /SMC barriers and colour coaded with heat shrinkable sleeves. The metering shall be provided as specified. The panel shall have short-circuit with standing capacities of minimum 50KA and consists of switchgear as mentioned below. This shall be got be manufactured from the manufacturers of CPRI test certificate only. The panel shall be mounting on U channels including supply and fixing the same and painting with powder coating including internal connections cost and conveyance of all materials & labour charges.

400A Alluminium Bus Bar with colour coded sleeves. (0.8A/Sqmm).

Internal wiring with approved make cable

Earthing Flat: Providing suitable G.I Flat

Supply of 400A 4 Pole ACB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 35/36 KA with thermal magnetic release Panel Mounted - 1 No

MCCB Make: Schneider-NS NSX/Legrand-DP X3.

Supply and erection of 0-500V volt Digital meter of size 96x96mm on exisiting box / panel board including connections etc., complete. - 1 No

MAKES : CONZERVE / ELMEASURE / LK / SEIMENS / .

Supply and erection of 0-400A Digital Ammeter of size 96x96mm on existing box / panel board including connections etc., complete. - 1 No

MAKES : CONZERVE / ELMEASURE / LK / SEIMENS.

Supply and erection of selector switch for Ammeter on the existing box / panel including connections etc., complete. - 1 No

MAKES : LK / C&S / SALZAR / /Siemens.

Supply and erection of selector switch for voltmeter on the existing box / panel including connections etc., complete.- 2Nos

MAKES : LK / C&S / SALZAR /Siemens.

Supply and erection of LED indication lamps on the existing panel board. - 3Nos

MAKES : LK / C&S / SALZAR /Siemens.

Supply and erection of LT current transformer with bar primary 400 / 5A ratio in the existing panel including connections etc., complete. - 3Nos

MAKE :KAPPA or Equivalent

32A Bakelite fuse units with HRC fuse links (A.R.) - 3Nos

Supply and fixing of 8 Stage APFC Relay with connections suitable CTs sensing from main bus bar of main panel. - 1No

Makes : LK/ Siemens / EPCOS / Schneider / Elmeasure

Supply of 125A 3 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 25 KA with thermal magnetic release Panel Mounted. - 1Nos

MCCB Make: Schneider-NS NSX/Legrand-DP X3/LK

Makes:LK (L&T)/ Siemens/Schneider/ Epcos.

Supply of 63A / 60A 3 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 25 KA with thermal magnetic release Panel Mounted. - 5Nos

MCCB Make: Schneider-NS NSX/Legrand-DP X3/LK

Makes:LK (L&T)/ Siemens/Schneider/ Epcos.

Supply and fixing of 50 KVAR rating capacitor duty contactor - 1Nos

Makes:LK (L&T)/ Siemens/Schneider/ Epcos.

Supply and fixing of 25 KVAR rating capacitor duty contactor - 1Nos

Makes:LK (L&T)/ Siemens/Schneider/ Epcos.

Supply and fixing of 20 KVAR rating capacitor duty contactor - 1Nos

Makes:LK (L&T)/ Siemens/Schneider/ Epcos.

Supply and fixing of 15 KVAR rating capacitor duty contactor - 1Nos

Makes:LK (L&T)/ Siemens/Schneider/ Epcos.

Supply and fixing of 5 KVAR rating capacitor duty contactor - 2Nos

Makes:LK (L&T)/ Siemens/Schneider/ Epcos.

Labour charges etc complete with connections for finished item of work.

Supply and fixing of 25 KVAR MPP type heavy duty capacitor of not less than 480V of cylindrical type - 1Nos

Makes:LK (L&T)/ Siemens/Schneider/ Epcos.

Supply and fixing of 20 KVAR MPP type heavy duty capacitor of not less than 480V of cylindrical type - 1Nos

Makes:LK (L&T)/ Siemens/Schneider/ Epcos.

Supply and fixing of 15 KVAR MPP type heavy duty capacitor of not less than 480V of cylindrical type - 1Nos

Makes:LK (L&T)/ Siemens/Schneider/ Epcos.

Supply and fixing of 5 KVAR MPP type heavy duty capacitor of not less than 480V of cylindrical type - 2Nos

Makes:LK (L&T)/ Siemens/Schneider/ Epcos.

Control wiring,Labour charges for errection of switch gears,panels boards including all labour charges etc with connections for finished items of works including transportation charge.

Supply of 185 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I). Makes : Polycab / Havells KEI / Finolex

Supply of 50 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I). Makes : Polycab / Havells KEI / Finolex

Supply of 10.0 Sqmm 4 Core PVC / XLPE Insulated, Flexible Armouring Flexible Copper cable as per IS 7098 / Part-I / 1988 including all transportation charges etc complete. Makes : Finolex / RR kabel / Havells / Polycab / RPG / KEI / Gloster / V-Guard

Earth work excavation of Trench in hard ground soil up to a depth of 0.9Mtr and laying of U.G cables 10 to 185Sqmm on sand cushion covering the cable with bricks and back filling of Trench duly providing route indicator embedded in C.C including cost and conveyance of materials and labour charges etc., complete.

Labour charges for run of U.G cable on wall / existing pipe with necessary fixing arrangments such as saddles, clamps,wooden separators etc., comkplete (as directed by departmental official).

Supply and fixing of heavy duty type single compression brass cable glands duly nickel plated complete with brass checknut, outer sheath sealing rubber ring and washers suitable for 185Sqmm, 3.5 Core XLPE insulated armoured cable, including all labour charges and miscellaneous items etc complete Makes: SMI / Commet / Dowels

Supply and fixing of heavy duty type single compression brass cable glands duly nickel plated complete with brass checknut, outer sheath sealing rubber ring and washers suitable for 50Sqmm, 3.5 Core XLPE insulated armoured cable, including all labour charges and miscellaneous items etc complete Makes: SMI / Commet / Dowels

Supply and fixing of heavy duty type single compression brass cable glands duly nickel plated complete with brass checknut, outer sheath sealing rubber ring and washers suitable for 10Sqmm, 4 Core XLPE insulated armoured cable, including all labour charges and miscellaneous items etc complete Makes: SMI / Commet / Dowels

Supply and fixing of heavy duty long barrel alluminium lugs confirming to I.S specifications suitable for 185Sqmm cable etc complete with nuts, bolts and washers Makes: DMI / Jainson / Dowels or equivalent make as approved by the department

Supply and fixing of heavy duty long barrel alluminium lugs confirming to I.S specifications suitable for 50Sqmm cable etc complete with nuts, bolts and washers Makes: DMI / Jainson / Dowels or equivalent make as approved by the department

Supply and fixing of heavy duty long barrel alluminium lugs confirming to I.S specifications suitable for 25Sqmm cable etc complete with nuts, bolts and washers Makes: DMI / Jainson / Dowels or equivalent make as approved by the department e.

Supply and fixing of heavy duty long barrel alluminium lugs confirming to I.S specifications suitable for 10Sqmm cable etc complete with nuts, bolts and washers Makes: DMI / Jainson / Dowels or equivalent make as approved by the department

Supply of 3 Core 11 KV 120 Sqmm HT XLPE (E) armoured Cable. As per IS specification confirming to IS 7098/II/85 with latest ammendments. Makes: Polycab / Havells / KEI

Providing and errecting heat shrinkable indoor termination kit for 11 KV XLPE HT cable 3 core 120 Sqmm with necessary materials etc., complete. Makes : Transeal - Hong shang / Raychem / M Seal / Multy

Providing and errecting heat shrinkable outdoor termination kit for 11 KV XLPE HT cable 3 core 120 Sqmm with necessary materials etc., complete with anti tracking red colour material as per IEC / IS specs only. Makes : Transeal - Hong shang / Raychem / M Seal / Multy

Supply and Installation of 300mm x 50mm x 2mm thick GI perforated cable tray with out cover along with required angle supports, with coupler plates, Anchor bolts and nuts etc complete and the tray should be fitted on the wall / Ceiling etc. complete. Makes:DEC/MNR/Aparna/HFAB orequivalent

Supply , fabrication and transportation of MS channel iron/ angle iron /flats including two coats of alluminium paint and one coat of red oxide paint including all labour charges etc complete.

Supply of Rubber hand gloves suitable for 11 KV.

Supply and fixing of PVC synthetic elastomer electrically insulated mat with Class B insulation conforming to IS: 15652-2006 having 2.5mm thickness upto 11KV.

Providing & Fixing of Shock instruction chart in English / Hindi / Telugu duly framed with front glass.

Providing & Fixing of Danger Notice Plates of size 250x200mm, shall comply with IS:2551-1982.

Providing floor mounting stand for keeping 4No of fire bucket 1500mm length, 900mm height made out of 40x40x6mm angle iron welded with 4 hooks and duly painted with one coat of red lead and two coats of enamel paint.

Providing & Supply of round bottom G.I sheet bucket of 9 Ltrs. Capacity as per IS:2546 made out of 24 gauge GI sheet with extra handle at bottom duly painted inside and red out side with printed with FIRE Mark for stand and hook and filled with sand and arranged to existing stand or hook.

First Aid box 18" x 12" x 8" containing material as prescribed by St. John Ambulance brigade OR Indian Red Cross complete as required.

Supply of 40-45W decorative LED post top lantern with die cast alluminium spigot, spun alluminium powder coated top cover, alluminium preasure die cast heat sink, opel PC diffuser and clear acrylic etc suitable for pole mounting complete with all accessories. Makes : Crompton / Bajaj / Surya / Havells / Phillips / Panasonic / Halonix / K Lite / Wipro / Jaquar / VSTP / T Lite.

Fabrication, transportation and supply of 12 Mtrs Polygon High Mast with single section of 3mm thick of Bottom 360mm and Top 150mm dia with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate, having a base plate of size 520mm dia 16mm thick with its accessories. Mast shall be in single section for 12 Mtrs . Mast shall be hot dip galvanized and suiatble for wind velocity of 180 KMPH as per IS 875 part 3 including head frame, 2 point suspension system with steel rope 6mm dia (7/19) construction double drum winch / power tool , and necessary cable trailer connections and single speed motor with M 24 x 800 mm foundation bolts of required quantity, suitable for 6 luminaires with GLS type aviation twin lamp. Makes : BAJAJ / VALMONT / TRANSRAIL / SKIPPER / UTKARSH / LAASMA / Vakrangee

Supply transportation and fixing of 150W LED Flood light Luminaire made of pressure die cast aluminum housing with powder coated, having toughened glass cover, Suitable lens on LEDs, IP 66 (Silicon gasket ensures Optical & Electrical compartments are IP 66 ) protected, wide operating voltage range , P.F > 0.90, System having efficacy >110 lumens/watt, with Ingress protection IP66, Driver surge protection >10KV, THD<15%, CCT: 3000- 6500K as desired by the department and as per IS, CRI>70, Inbuilt Electrical protections like Over voltage, short circuit, Over load, Open Circuit, Miswiring, etc complete with BIS certification with 5 years warranty. The contractor has to furnish the manufacturer warranty letter, LM 79 and LM 80 certificates. LUMINAIRE MAKE : Philips / Osram / Crompton / Bajaj / Surya / Wipro / Jaquar / Eveready / Halonix / Keselec / Havells / Polycab / Surya / Syska./ Ecolink / Capart / Fortune Arrt / GM / Goldmedal / Panasonic / Silicon / Leksa / Orient / HPL / Valmont / Transrail / Bee -Lite/Accent LED MAKE : Philips Lumileds / Cree / Nichia / Osram / Samsung / LG LEDs.

Supply and fixing of suitable out door feeder piller box of size made with 14 SWG CRCA sheet with double door arrangement, making powder coating after processing of 7 Tank process, lock and key, hinges, rubber gasket, danger board,suitable angle iron stand for mounting the feeder pillar with cement concrete, including Supply and fixing of Legrand / Schnieder make 125A, 4 Pole MCCB as incomer, 6Nos 63A TP MCBs and 6 Nos 6-32A SP MCBs as out goings, indication lamps, din channel, 10 Sqmm copper cable for inter connection connectors, bus bars, shroudings, gland plates and complete for finished item of work and suitable wiring provision for connecting the nature switch.

Supply and fixing of Automatic Street Light Control System with Optical Sensor, Low volatage / High voltage trip and reset, operating voltage 380 - 450 V AC, 50 HZ with suitable SMC enclousure of IP 54 protection, MCBs of Legrand / Schneider / L&T / Siemens of 10KA C/D curve and Contactor suitable to control the load of 8 KW Three phase load with necessary clamping arrangements. Makes : Swadeep Nature Switch / Light Mate / L&T / Siemens / Bajaj

Supply , transportation and fixing of 90W LED Street light Body made of high grade pressure die – cast Aluminium alloy with corrosion resistant powder coat, having protective toughened glass cover / temperature protective custom molded polycarbonate diffuser, Thermal shock and impact resistant IK07 fixed to the housing by SS screws Suitable lense on LEDs, Less Glare, IP 66 (Silicon gasket ensures Optical & Electrical compartments are IP 66) protected, wide operating voltage range, P.F > 0.90, System having efficacy >120 lumens / watt, with Ingress protection IP66, BIS approved Potted driver, Driver surge protection >10KV, THD<15%, CCT: 3000- 6500K as desired by the department and as per IS, CRI>70, Inbuilt Electrical protections like Over voltage, short circuit, Over load, Open Circuit, Miswiring, etc complete with BIS certification with 5 years warranty. The contractor has to furnish the manufacturer warranty letter, LM 79 and LM 80 certificates. LUMINAIRE MAKE : PHILIPS / OSRAM / CROMPTON / BAJAJ / Surya / Ecolink / Wipro / Jaquar / Eveready / Halonix / Keselec / HAVELLS / POLYCAB / SURYA / Capart / Fortune Arrt / Goldwyn / Panasonic / GM / Goldmedal / Silicon / Orient / HPL / Valmont / Transrail / Bee - Lite / Accent LED MAKE : Philips Lumileds / Cree / Nichia / Osram / Samsung / LG LEDs.

Supply and transportation of 90W LED Street light Body made of high grade pressure die – cast Aluminium alloy with corrosion resistant powder coat, having protective toughened glass cover / temperature protective custom molded polycarbonate diffuser, Thermal shock and impact resistant IK07 fixed to the housing by SS screws Suitable lense on LEDs, Less Glare, IP 66 (Silicon gasket ensures Optical & Electrical compartments are IP 66) protected, wide operating voltage range, P.F > 0.90, System having efficacy >120 lumens / watt, with Ingress protection IP66, BIS approved Potted driver, Driver surge protection >10KV, THD<15%, CCT: 3000- 6500K as desired by the department and as per IS, CRI>70, Inbuilt Electrical protections like Over voltage, short circuit, Over load, Open Circuit, Miswiring, etc complete with BIS certification with 5 years warranty. The contractor has to furnish the manufacturer warranty letter, LM 79 and LM 80 certificates. LUMINAIRE MAKE : PHILIPS / OSRAM / CROMPTON / BAJAJ / Surya / Ecolink / Wipro / Jaquar / Eveready / Halonix / Keselec / HAVELLS / POLYCAB / SURYA / Capart / Fortune Arrt / Goldwyn / Panasonic / GM / Goldmedal / Silicon / Orient / HPL / Valmont / Transrail / Bee - Lite / Accent LED MAKE : Philips Lumileds / Cree / Nichia / Osram / Samsung / LG LEDs.

Manufacture, supply, & delivery of (DWC) structured wall polyethylene/polypropylene piping system class SN-8 with non smooth external annular corrugated and smooth internal surface (Double Wall) for non pressure sewage & Drainage application pipes of standard length 6 m, grade conforming to IS 16098 (part-II: 2013) including rubber gasket, transportation to anywhere in Telangana, loading, unloading charges but excluding all taxes etc complete. Pipe OD 180mmm Pipe IS 150mm

Lowering , laying of Class SN 8 Double wall corrogated ( DWC) pipping system into ready made trenches , laying true to line and level and perfect linking at joints, encasing the pipe alround with soft gravel, testing and commissioning, and giving necessary hydraulic test to the required pressure as per ISS etc complete for finished item of work.

I. STRUCTURAL FOUNDATION EARTHING Supply and installation of 10 mm copper bonded Solid Steel Round Conductor with minimum coating thickness 70µm for Type-B Earthing and should be tested for Tensile strength, Electrical Resistance, salt mist, Bend & Adhesion to meet the requirements of IS/ IEC 62305 and IEC 62561-1&2. Makes : CAPE / OBO

Installation of Exothermic Welding - Including welding mould and other accessories for welding confirms the requirements of IEEE 837:2014 : T-Joint, X-Joint, L-Joint , Straight joint Makes : CAPE / OBO

Supply and Installation of Corrosion Proof Band to meet the requirements of IS / IEC 62305. Makes : CAPE / OBO

II STRUCTURAL DOWN CONDUCTOR Supply and installation of 10 mm copper bonded Solid Steel Round Conductor with minimum coating thickness 70µm as integrated down conductor. Material should be tested Tensile strength, Electrical Resistance, salt mist, Bend & Adhesion to meet the requirements of IS/ IEC 62305 and IEC 62561-1&2.Makes : CAPE / OBO

Supply, installation and Testing of Bonding clamp/Rebar Hook for interconnecting 10mm - 18mm round conductor with reinforcement inside the concrete to meet the requirements of IS/IEC 62305 .( for Ring) Makes : CAPE / OBO

Supply and installation of stainless steel Straight Connector at every 4 Mtr of integrated down conductor and should be tested for electrical resistivity, mechanical load to meet the requirement for IS/IEC - 62305 and IEC 62561-1&2. Makes : CAPE / OBO

Supply and installation of stainless steel Earth stud of dimension 70 x 70 mm integrated inside concrete and should be tested for electrical resistivity, salt spray and huminity test & short circuit to meet the requirements of IS/IEC 62305 and IEC 62561-1&2.5. Makes : CAPE / OBO

Supply , installation and Testing of air termination rod of 2 mtr length of material AlMgSi of diametre ø 16/10 mm crimped on both the ends(Tappered Type). The rod shall be mounted with stainless steel clamp and fixing accessories Test Parameter:Mechanical Load Test for individual aluminium alloy rods - 120 to 280 N/mm²Salt Spray Test-No sign of corrosionTested as per IEC 62561-1&2 Makes : CAPE / OBO

Supply and Transportation of of INVERTER Model Cool type split AC unit with high wall mounted Single Split 100% copper indoor and outdoor condencing unit Hermetically sealed compressor suitable for operation on 230V, 50Hz, 1Phase AC supply capable of performing Heat cool dehumidifying air circulating and filtering with cooling and condensing units with 3.0 mts of copper piping, insulation kit and 4 mts of 4 core copper flexible chord (Voltage range 160- 264 volts) and cordless remote control with with warranty of compressor for 5 years iand comprehensive maintenance for 2 years 1.5 TR 3 Star capable of delivering 18000 BTU/hr and above with operating on refrigerant R-32 / R-410 Makes : Daikin / Blue Star / Toshibha / Carrier / Hitachi / LG / Samsung / Lloyd or equivalent

Making hole in stone masonary / RCC Wall / RCC slab with core cutter for accommodating refrigerant pipe / drain pipe / MS pipe / cables etc., of ….. Dia per running inch length - 50 mm

Making hole in stone masonary / RCC Wall / RCC slab with core cutter for accommodating refrigerant pipe / drain pipe / MS pipe / cables etc., of ….. Dia per running inch length - 100 mm

Making hole in stone masonary / RCC Wall / RCC slab with core cutter for accommodating refrigerant pipe / drain pipe / MS pipe / cables etc., of ….. Dia per running inch length - 150 mm

Supply, Installation, Testing and Commissioning of ..... cooling capacity, .... storage capacity self contained drinking water cooler as per IS : 1475 with hermetically sealed compressor, non CFC refrigerant suitable for operation on 230 V , 1 phase, 50 Hz AC supply, Fully stainless steel (SS 304) body (0.8 mm thick) and tank (0.5 mm thick), stainless steel water tray, minimum 2 numbers SS / Brass chrome plated faucetes and suitable drainage system complete in all respects including comprehensive maintenance of units during the defect liability period. Makes : Bluestar / Voltas - Cooling capacity of 20 Ltr/ Hr , 40 Ltr Storage capacity

Supply, installation, testing and commissioning of the drain pipe with CPVC pipes with all accessories and insulation with 6mm thick closed cell nitrile rubber of the following sizes, with all required accessories Makes : Astral / Ashirvad or equivalent approved by the department - 20 mm

Supply, installation, testing and commissioning of the drain pipe with CPVC pipes with all accessories and insulation with 6mm thick closed cell nitrile rubber of the following sizes, with all required accessories Makes : Astral / Ashirvad or equivalent approved by the department - 25 mm

Supply, installation, testing and commissioning of the drain pipe with CPVC pipes with all accessories and insulation with 6mm thick closed cell nitrile rubber of the following sizes, with all required accessories Makes : Astral / Ashirvad or equivalent approved by the department - 32 mm

Supply, Transportation, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required Makes : Jindal Hissar / Tata pipes - 150 mm dia 'C' Class

Supply, Transportation, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required Makes : Jindal Hissar / Tata pipes - 80 mm dia 'C' Class

Supplyand wrapping the anti corrosive material for buried pipes with coating of Primer and wrapping with 4 mm thick polymer corrosion resistant tape as per IS : 10221 with 15 mm overlap as per standard specificatios. - 150mm nominal dia

Supplyand wrapping the anti corrosive material for buried pipes with coating of Primer and wrapping with 4 mm thick polymer corrosion resistant tape as per IS : 10221 with 15 mm overlap as per standard specificatios. - 80mm nominal dia

Supply and fixing single headed internal / External hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :Make: Mini Max / Safex / Newage / Winco / Newtech / Padmini / Kartar - Single headed Stainless Steel

Supply and fixing 63mm dia, 15 mtr long RRL hose pipe with 63mm dia Male and Female Gun metal / SS couplings duly binded with GI wire, rivets etc conforming to IS 636 (Type -A) as required.Make: Mini Max / Safex / Newage / Winco / Newtech / Padmini / Kartar - Gun metal+ SS couplings

Supply and fixing First -Aid Hose Reel with MS construction spray painted in Post office Red, Conforming to IS 884 with upto date amendments, complete with the following as required. 36.6 Mtr Long 20mm (Nominal internal)dia water hose Thermoplastic / Textilereinforced / Rubber braided /Polypropylene Type - 2 as per IS:12585Make: Eversafe / Newage / Newtech /SRI 20mm (Nominal internal) dia gun metal globe valve and nozzle.Make: Newage / Winco / Padmini / Newtech / Safex. Drum and brackets for fixing theequipments on wall Connections from riser with 25mm diastop valve (gun metal) & MS pipe.

Supply and fixing 63mm dia Gun metal branch pipe with 20mm (Nominal internal diameter) size Gun metal / SS nozzle conforming to IS 903, suitable for instantaneous connection to interconnect hose pipe coupling as required.Make : Mini Max / Safex / Newage / Winco / Newtech / Padmini./ Kartar - Gun metal+ SS couplings

Supplyand fixing of hose cabinet of size 750mm X 600mm x 250mm made of No 16 gauge SWG CRCA sheet with 6mm thick glazed glass door including necessary locking arrangement suitable to accommodate 2 Nos 15 mtr long Hose pipe, 1 No branch pipe, mounted on wall OR raised brick platform and duly painted with Post office red externally and white internally with synthetic enamel paint complete in all respect, for external hydrant as required.Make: Mini Max / Safex / Newage / Winco / Newtech / Padmini / Karta

Supply, installation, testing and commissioning of 25 / 20mm dia Air Release Valve

Constructing 904.0 mm (3’0”) dia solid block masonry inspection chamber as per IS - 4111: Part- 1:1986 with cement mortar (1:6) prop using fly-ash blocks of 225 mm thick from approved source having a minimum crushing strength of 10 N/sq.mm including plastering with cement mortar 1:3 prop; ½”thickbothinsideand outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification.

Earth work excavation for foundations (Mechanical Means) for buildings in ordinary soils and depositing on bank for all lifts and with an initial lead of 10m and up to 3m depth including all operational, incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work excluding dewatering charges etc., as per SS 20 B(APSS 308).

Supply, Installation, testing and commissioning of EN54-2 Listed and UL approved based analog addressable ------- ----- fire control panel expandable by minimum 2 additional loops with minimum 640 character LCD display. Each loop of panel shall have maximum capacity 250 analogue addressable devices, and shall have 20% of spare capacity, 240 volts A C Power supply, automatic battery charger, 24V SLA batteries suitable for operating the entire system including tack back units and the hooters/strobes for a minimum of 4 hours in battery condition the panel shall have suitable power amplifiers for hooter / strobes the panel shall be capable beeing integrated with the BMS system and shall include cost of supply, installation of any additional modules or interfaces required for the same.Makes: Siemens / Notifier / Edwards / Honeywell / Morley IAS / Bosch / Cooper / Appolo / Kartar - 2 loop micro processor

Supply, Installation, testing and commissioning of EN54-2 Listed and UL approved based analog addressable ------- ----- fire control panel expandable by minimum 2 additional loops with minimum 640 character LCD display. Each loop of panel shall have maximum capacity 250 analogue addressable devices, and shall have 20% of spare capacity, 240 volts A C Power supply, automatic battery charger, 24V SLA batteries suitable for operating the entire system including tack back units and the hooters/strobes for a minimum of 4 hours in battery condition the panel shall have suitable power amplifiers for hooter / strobes the panel shall be capable beeing integrated with the BMS system and shall include cost of supply, installation of any additional modules or interfaces required for the same.Makes: Siemens / Notifier / Edwards / Honeywell / Morley IAS / Bosch / Cooper / Appolo / Kartar - 1 loop micro processor

Supply and fixing of addressable wall mounting strobes cum hooters including the cost of mounting accessories complete as per specifications and as required including testing and commissioning.Makes: Siemens / Morley IAS / Bosch / Ravel / Honeywell/cooper / Appolo / Kartar

Supply and installation of addressable analogue manual call point with resetable flexible element to initiate alaram including the cost of mounting accessories etc. complete.Makes: Notifier / Edwards / Honeywell / Morley IAS / Bosch / Cooper / Appolo / Kartar

Supply of 1.5 Sqmm 2 Core PVC / XLPE Insulated Armoured Copper cable as per IS 7098 / Part-I / 1988 including all transportation charges etc complete.Makes : Finolex / RR kabel / Havells / Polycab

Supply, Installation, testing and commissioning of intellegent analogue addressable Repeater panel including the cost of mounting accessories complete as per specification as required.Makes: Notifier / Edwards / Honeywell / Morley IAS / Bosch / Cooper / Appolo / Kartar

Supply, Installation, Testing and Commissioning of Amplifier 120 W for PA system suitable to operate on 230 V AC / 12 V DC supply etc., complete.(AHUZA / OMEGA or equivalent)

Supply, Installation, Testing and Commissioning of 15 W Sound Column etc., complete with connection (AHUZA / OMEGA or equivalent)

Supply, Installation, Testing and Commissioning of microphone etc., complete with connections. (AHUZA / OMEGA or equivalent)

Supply, Installation, Testing and Commissioning of 2 core shielded microphone cable etc., complete with connections

Supply and fixing of ABC powder type fire extinguisher of 6Kgs capacity with initial filling in brand new cylinder with powder coated finsh, fitted with gun metal union, high pressure gas catridge, discharge hose, valve mounting bracket/ stand etc complete confirming IS 15683 Makes : Safex / Kenex / Bharat / Reliance

Supply & Fixing of 4.5Kg, CO2 Type Fire Extinguisher, Trolley Mounted, Easy Weight Management, Used Unused Mechanism, Squeeze Grip, Gross Weight 19.1 Kg, Empty Weight 14.6 Kg, Can Height 860MM, Diameter 140MM, Discharge time minimum 13 Secs, Controllable discharge mechanism, Range minimum 2 Meters, Applicable on Class B,C & electrically started Fire, B Rating 13B, Can Construction : Hot Spinning / Forging, Valve Construction : Forging & Machining, Internal Coating of Can : Not Applicable, External Coating of Can : Spray Painting, Sheet metal thickness : 4.5MM, ISI & CE Approved, 2 Year Warranty Including transportation, all taxes and all labour charges etc complet Makes : Safex / Kenex / Bharat / Reliance

Supply and fixing of Escape signage boards in Rigid Photo luminecent based glow in Dark rigid sheet with high intensity luminous properties with specificaiton of Cease Fire or its equivalent make Model-1ES01

Supply, Installation, Testing and Comissioning of 2MP Dome camera 1/2.8'' CMOS progressive sensor, min. illumination 0.006 Lux F1.6 (color), 0 Lux B/w, 50dB S/N ratio; 1/8 ~1/32000 shutter speed, IR distance - 50Mtr or better, 120 dB or better WDR, triple stream;Protocal: IPv4, TLS,DHCP,IPv6, TCP / IP, HTTP, SMTP,UDP,HTTPS, RTSP / RTP / RTCP,DNS,SNMP, IGMP / Multicast, NTP, QoS, 802.1X, ICMP, ARP; Motion Detecton, People counting, Intrusion, Loitering, SMD, Tampering; local storage: up to 256Gb; Alarm IN & Outputs, Audio IN & Out; ONVIF-S/G/T; Security: HTTPS,Digest authentication, User account and password protection,TLS1.2 only, Stream encryption, AES128/ Telnet closed, IP Filter,PCI-DSS compliance; IP67,IK10, UL,CE,FCC, NDAA Compliant Approved Makes: BOSCH /HONEYWELL / MOBOTIX/ AXIS (Agency should submit the authorization to be submittedfor future maintenance and guarantee)

Supply, Installation, Testing and Comissioning of 2MP Bullet camera 1/2.8'' CMOS progressive sensor, min. illumination 0.006 Lux F1.6 (color), 0 Lux B/w, 50dB S/N ratio; 1/8 ~1/32000 shutter speed, IR distance - 60Mtr or better, 120 dB or better WDR, triple stream;Protocal: IPv4, TLS,DHCP,IPv6, TCP / IP, HTTP, SMTP,UDP,HTTPS, RTSP / RTP / RTCP,DNS,SNMP, IGMP / Multicast, NTP, QoS, 802.1X, ICMP, ARP; Motion Detecton, People counting, Intrusion, Loitering, SMD, Tampering; local storage: up to 256Gb; Alarm IN & Outputs, Audio IN & Out; ONVIF-S/G/T; Security: HTTPS,Digest authentication, User account and password protection,TLS1.2 only, Stream encryption, AES128/ Telnet closed, IP Filter,PCI-DSS compliance; IP67,IK10, UL,CE,FCC, NDAA Compliant Approved Makes: BOSCH /HONEYWELL / MOBOTIX/ AXIS (Agency should submit the authorisation to be submitted for future maintenance and guarantee)

Supply, Transportation, Installation, Testing and Commissioning of 5MP IR Speed Dome/PTZ, Optical zoom 30X, optical Zoom 16X, 5.3 ~159mm, P-Iris, 1/2.8" progressive CMOS image sensor, Min. Illumination 0.007 (color), S/N Ratio: 50dB, Electronics Shutter: 1/1 ~ 1/30000sec, Max 30 fps, IR Distance: up to 150M, WDR~120dB/BLC/HLC/3D DNR, Gain Control: 0 ~100%, Alarm 2 IN& 2 OUT; SD card up to 256GB, PAN Range/Speed: 0-360/.1 ~ 180/s deg, Tilt Range/Speed: -10 ~ +90/.1 ~ 90deg/s, 400 preset locations, 12 tours, 6 patterns; Video Compression: H.265 HEVC/H.264/MJPEG, Smart Codec; Triple Stream;30fps; Video analytics: People counting, intrusion, tampering,Loitering, Motion Detection, SMD; 2 way audio stream with full duplex Protocals: IPv4, IPv6, TCP / IP, HTTP, HTTPS, UPnP, RTSP / RTP / RTCP, IGMP / Multicast, SMTP, DHCP, NTP, DNS, QoS, SNMP, 802.1X, UDP, ICMP, ARP, TLS; User account and password protection, HTTPS, IP Filter, Digest authentication, TLS1.2 only, Stream encryption, AES128 / 256, SSH / Telnet closed, PCI-DSS compliance ONVIF: S/G/T; Op. Temp: -40 to 60 Deg; power consumption max. 25W; IP66/IK10/UL/NDAA, with required mounts including 5 yrs warranty Makes: BOSCH /HONEYWELL / MOBOTIX/ AXIS or equivalent as approved by Department

Supply and Installation Testing and commissioning of 64 Ch NVR with 8 SATA 10TB with following features: • Up to 64 channel Video Inputs • Up to 8 SATA interface • 200MBPS Video/Audio Incoming Bandwidth • 200MBPS Video/Audio Outgoing Bandwidth • Recording at up to 8 MP resolution • Supports live view, storage, and playback at up to 8 MP resolution • HDMI Video output up to 4K (3840 ×2160) resolution • H.264/MPEG4 video formats • Synchronous Playback upto 16-Ch. • Audio I/O • Alarms I/O Make: Honeywell/AXIS/MOBOTIX / Bosch

Supply and installation of Surveillance 8 TB Hard Disk Make : WD/ Seagate

Supply, Installation, Testing and Commissioning of 24 Port, 4 GIGA fibre slots (SFP), power budget 250 W 10 / 100 / 1000 Gigabit PoE switchwith GIGA fibre slots (SFP). Makes : Digisol / TP Link / D link

Supply, Installation, Testing and Commissioning of16 Port, 2 GIGA fibre slots (SFP), power budget 250 W 10 / 100 / 1000 Gigabit PoE switchwith GIGA fibre slots (SFP). Makes : Digisol / TP Link / D link

Supply & Fixing of 55 inch LED monitor 4K smart commercial display unit with VGA HDMI, USB ports. Panel Type LCD, Aspect Ration 16:9, Resolution 3480 x 2160, Brightness 350 nits, Contrast ratio 4000:1, Response time 8ms, icluding 3 yrs warranty Approved Make : Samsung / LG or equivalent as approved by Department

Supply of unloaded 24 port patch panel with IO separate including all labour charges etc complete Makes : Digisol / TP Link / D link. / Legrand

Supply, Installation, Testing and Commissioningof 24 Port 10 / 100 / 1000 Gigabit Unmanageable Ethernet switch. Makes : TP Link / D link / Netfox

Supply Installation of 7 feet length moulded patch cord including accessories and all labour charges etc complete Makes: Digisol / TP Link / D link. / Legrand

Supply and installation of IP 20, IK 08 17U floor 600mm Width x 1000mm Deep Floor mounting network rack with all accessories like front and rear doors, fans, castor wheels (2 with break and 2 without break), cable manager, cantilever shelf, horizontal and vertical wer distribution unit, monitor shelf, brush at cable entry and hardware packet, etc. Mod cap floor stand : Modular construction of the rack made of 4 vertical , 4 Horizontal and 4 depth alloy extruded multi folded hallow profiles bolted and joined together with links and corner blocks. 3 Pairs of support channels to equate the load evenly and castor provision at bottom side.Painting shade : Combination of RAL 7035 / 7037 fine texture - 60 to 80 microns. or RAL 9005 fine texture - 60 to 80 microns complies with standards : UL 2416, Din 41494, IEC EN 60529, IEC EN 62262, IEC EN 60068-2-11, ISO 9001-2008.Netrack

Supply and installing HDMI cable low voltage grade as per standard specifications having 5 Mtr cord length with male and female 19 pin HDMI connectors as per requirement at site.

Supply, lnstallation, Testing and commissioning ot Hydro Pneumatic system with Variable Speed Drive, common inlet and out let manifolds, Non-return valves and isolating valves for each pump on the outlet side, pressure switches and one pressure transmitter conneded to the outlet manifold, an outlet pressure gauSe on the outlet manifold, pressure tanks, a control panel, control l{PC to eledrically switch on/off the pumps, Display & controller, all necessary interconnedions tor the above item5. This entire system should have compatibilityto integratewith BMs/lBMssystem Total Head:40 mtrs Each Pump capa€ity:19.5 m/hr No.of Pumps | 3 Nos (2w + 1s) 19,5 m3/hr each pump @40 mtrs Head Hydro MPC F 3xCR15-4,(2w + 1s), (4kw each Pump ,/ 5.5 HP), lnlet & Outlet:0N 100 Hydro Pneumatic Vertical Multistage inline Pressure Eoosting Skid Mounted Syrtem with SinSle VFD & 100 Ltrs Pressure Vessel, 10bar - 1 No

Sri Kaleshwara Muktheswara Swamy Temple (Garbhalayam, Anthralayam, Tritala Vimanam, Anujna Ganapati Koshtam, Mukha Mandapam and Anivotti Mandapam)

Earth work excavation for BUILDING foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means. - Upto 3 M depth.

Filling with useful available earth by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Filling with carted gravel by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Providing post construction anti termite treatment by drilling 1/2 inch dia., holes at the edges of wall floor junction and pouring anti termite chemical (Imidacloprid 30.5 SC, 10.5 ml for 5 Liters of water as per IS 16131.) with a hand operated pressure pump until refusal or to a maximum of one liter per hole. Holes shall be sealed with cement motor after treatment and providing spraying and injecting termiticides for treating and applying to doors, windows, frames, removing, crusting treating in Treatment along outside of foundations (i.e.,Soil in contact with external walls around the building and Concrete or Masonry apron around the building), Treatment of soil under floors - Inside Building, Treatment to voids in masonry, Treatment at points of contact of woodwork, Treatment of Wood Work, Treatment of Electrical Fixtures, as directed in IS 6313 Part 3 2013 with preventive chemicals duly taking precautions for health hazards and safety measures for the occupants including all costs, conveyances of all materials and labour charges,overheads and contractors profit etc complete for finished item of work to the satisfaction of the Engineer-in-Charge. The plinth area of the building each floor shall be taken for the purpose of payment.

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for machine mixing, laying concrete in foundations and under flooring bed, finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Footings

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Pedestals

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Plinth Beams

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS. - Columns - un-supported height of 3.66m - Ground Floor

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. - Grade Slab - 200mm thk

Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal Panther) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) - Ground Floor

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 1 to 20 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 20 to 40 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 40 to 60 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 60 to 80 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 80 to 100 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - above -100 Cft

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR- 4.70)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - GARBHALAYAM &ANTRALAYAM - UPAPEETAM KAPOTHAKAM (SoR-4.713).

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - GARBHALAYAM &ANTRALAYAM - ADHISTANA PADMAJAGATHI IN MUKAPATRAM (SoR-4.715)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - GARBHALAYAM &ANTRALAYAM - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - STHAMBHAVARAGAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - GARBHALAYAM &ANTRALAYAM - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - GARBHALAYAM &ANTRALAYAM - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ARCHES

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - GARBHALAYAM &ANTRALAYAM - SALAHARAM - Chola style (SoR-4.822)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - GARBHALAYAM INNER VARGAMS - UPAPEETAM KAPOTHAKAM (SoR-4.713)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - GARBHALAYAM INNER VARGAMS - ADHISTANA PADMAJAGATHI IN MUKAPATRAM (SoR-4.715)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - GARBHALAYAM INNER VARGAMS - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - STHAMBHAVARAGAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - GARBHALAYAM INNER VARGAMS - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - GARBHALAYAM INNER VARGAMS - ROOF STONES (SoR-4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - 3 STORIED VIMANAM - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - KARNAKOOTAM-1

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - 3 STORIED VIMANAM - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - PRASTARAM-1

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - 3 STORIED VIMANAM - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - KARNAKOOTAM-2

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - 3 STORIED VIMANAM - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - PRASTARAM-2

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - 3 STORIED VIMANAM - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - KANTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - 3 STORIED VIMANAM - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - SHIKARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MAHA MANDAPAM - ALLROUND PEETAM - PADMAJAGATHI (SoR - 4.711)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MAHA MANDAPAM - SMALL PILLARS - CHITRA KANTA STAMBAM (SoR- 4.811)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MAHA MANDAPAM - PODIKA - PUSHPA POTHIKA WITH 4 SIDES (SoR - 4.819)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MAHA MANDAPAM - BEAMS -H - ELUDHAKAM INSIDE BEAMS (SoR - 4.725)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MAHA MANDAPAM - BEAMS -V - ELUDHAKAM INSIDE BEAMS (SoR - 4.725)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MAHA MANDAPAM - ROOF STONES (SoR-4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MAHA MANDAPAM - KODUNGAI - (SoR-4.722)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MAHA MANDAPAM - VYALAM (SoR-4.723)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MAHA MANDAPAM - SALAHARAM - Chola style (SoR-4.822)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MAHA MANDAPAM - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ARCHES

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - HIGH ROOF MANDAPAM - ASWAPADAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - HIGH ROOF MANDAPAM - ANIVETTI PILLARS - SINGLE BALAPADAM (SoR-4.823)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - HIGH ROOF MANDAPAM - PODIKA - PUSHPA POTHIKA WITH 4 SIDES (SoR - 4.819)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - HIGH ROOF MANDAPAM - PILLARS TO PILLAR KAPODAKAM (sOr-4.722)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - HIGH ROOF MANDAPAM - BEAMS -H - ELUDHAKAM INSIDE BEAMS (SoR - 4.725)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - HIGH ROOF MANDAPAM - BEAMS-V - ELUDHAKAM INSIDE BEAMS (SoR - 4.725)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - HIGH ROOF MANDAPAM - ROOF STONES (SoR-4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - HIGH ROOF MANDAPAM - VYALAM (SoR-4.723)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - HIGH ROOF MANDAPAM - KODUNGAI - (SoR-4.722)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - HIGH ROOF MANDAPAM - SALAHARAM - Chola style (SoR-4.822)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - HIGH ROOF MANDAPAM - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ARCHES

Cost of Tool making Material like Chisels, Charcoal for furnace etc., for palmana dressing for Five line Dressing, including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.910)

Labour charged for Jointing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.913)

Supplying and fixing of scaffolding up to 20'0" ht. including cost and conveyance of all materials such as casurina poles, bamboo mats and coir rope etc., including labour charges, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-7.100)

Supply and fixing of metal Sthoopy with Sthoopi dandam, Brahma Randram stone, (Gandhapu Raie) including cost and conveyance of all materials and labour charges all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Copper Sthoopi - Upto 4'-0" Height (16 to 18 gauge) (SoR- 3.23)

Hire charges for a capacity of 80 tonnes Crane, including overheads & contractors profit etc. complete for finished item of work. (for Lifting of Stone material etc.,) (R&B - SoR- Hire Charges for Machinery - sl.no-30 a)

Supply of Hard granite stones of various sizes for Garbhalayam and Ardha Mandapam - Door Frame works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Door Frame above 7'-0" Height (SoR- 4.330)

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. for Door Frames in granite stone - Garbhalayam and Ardha Mandapam (SoR- 4.70)

Door Frames - Dressing - Five Line Palmana instead of fine Dressing and polishing and padmams at top & bottom, Nagabhandam on vertical stones all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam and Ardha Mandapam (SoR- 4.340)

Labour charged for fixing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work - for Door Frames in granite stone - Above 7'-0" to 9'-0" Height

Supply, Preparation & fixing of best Teak Wood Ornamental door shutters with two leaves as per standard temple design includig cost of frame and planks and preparation charges. Fixing of shutters in position, locking arrangements etc., complete. Door shutter with Best Teak Wood frame of 2" thick, Single Padmams of 2.5" thick and Best Teak Wood rare plank of thickness 1.5" - including cost and conveyance of all materials to site, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Material Charges (SoR-5.101)

Supply, Preparation & fixing of best Teak Wood Ornamental door shutters with two leaves as per standard temple design includig cost of frame and planks and preparation charges. Fixing of shutters in position, locking arrangements etc., complete. Door shutter with Best Teak Wood frame of 2" thick, Single Padmams of 2.5" thick and Best Teak Wood rare plank of thickness 1.5" - including cost and conveyance of all materials to site, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Labour Charges (SoR-5.103)

Providing and Carving Stone Vigrahams - (i.e., Poornachitram with Sarvabharanams, Sarvaayavayams, Padadi Kereethantham) as per the drawings approved by the Sthapathi with Fine Dressing, Polishing, Both Sides Finishing, with Jeeva Rekalu including Cost and Conveyance of Suitable Variety of Black Granite Stone, Chisels, Hammers, All Materials, Labour Charges, all operational, incidental charges, overheads and contractor's profit etc., using partly with machine cutting and remaining manual finishing Complete. - Standing Posture with Four Hands above 2'-0" to 4'-0" Height (SoR-4.514)

Supply of Granite stones of various sizes for Cut Stone Flooring works and minimum sizes of flooring 12"x24"x4" as directed by the sthapathi. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , operational, incidental charges, overheads and contractor's profit etc., complete. (SoR - 4.410)

Five line Palmana Dressing for hard granite stone not less than 12"x24" uniform size and thickness not lessthan 4" including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR -4.430)

Labout charges for Jointing for hard granite stone & soft variety including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work.- for Cut Stone Flooring works . (SoR-4.470)

Sri Kaleshwara Muktheswara Swamy Temple (Garbhalayam, Anthralayam, Tritala Vimanam, Anujna Ganapati Koshtam, Mukha Mandapam and Anivotti Mandapam) Total of Rs.

Temple Prakaram Mandapam, Nithya Kalyana Mandapam and Nitya Nivedhana Shala

Earth work excavation and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means. - Upto 3 M depth

Filling with useful available earth by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Filling with carted gravel by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Providing post construction anti termite treatment by drilling 1/2 inch dia., holes at the edges of wall floor junction and pouring anti termite chemical (Imidacloprid 30.5 SC, 10.5 ml for 5 Liters of water as per IS 16131.) with a hand operated pressure pump until refusal or to a maximum of one liter per hole. Holes shall be sealed with cement motor after treatment and providing spraying and injecting termiticides for treating and applying to doors, windows, frames, removing, crusting treating in Treatment along outside of foundations (i.e.,Soil in contact with external walls around the building and Concrete or Masonry apron around the building), Treatment of soil under floors - Inside Building, Treatment to voids in masonry, Treatment at points of contact of woodwork, Treatment of Wood Work, Treatment of Electrical Fixtures, as directed in IS 6313 Part 3 2013 with preventive chemicals duly taking precautions for health hazards and safety measures for the occupants including all costs, conveyances of all materials and labour charges,overheads and contractors profit etc complete for finished item of work to the satisfaction of the Engineer-in-Charge. The plinth area of the building each floor shall be taken for the purpose of payment.

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for machine mixing, laying concrete in foundations and under flooring bed, finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Footings

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. -Plinth Beams

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS. - Columns - un-supported height of 3.66m - Ground Floor

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. - Beams - un-supported height of 3.66m - Ground Floor

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. - Slab - 150mm thk - un-supported height of 3.66m - Ground Floor

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. - Grade Slab - 200mm thk

Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal Panther) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) - Ground Floor

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 1 to 20 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 20 to 40 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 40 to 60 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 80 to 100 Cft

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR- 4.70)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH EAST CORNER - UPAPEETAM KAPOTHAKAM (SoR-4.713)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH EAST CORNER -ADHISTANA PADMAJAGATHI IN MUKAPATRAM (SoR-4.715)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH EAST CORNER - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - STHAMBHAVARAGAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH EAST CORNER - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH EAST CORNER - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ARCHES

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH EAST CORNER - SALAHARAM - Chola style (SoR-4.822)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH EAST CORNER - INSIDE PEETAM -PADMAJAGATHI (SoR - 4.711)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH EAST CORNER - SMALL PILLARS - CHITRA KANTA STAMBAM (SoR- 4.811)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH EAST CORNER - PODIKA - PUSHPA POTHIKA WITH 4 SIDES (SoR - 4.819)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH EAST CORNER - BEAMS - ELUDHAKAM INSIDE BEAMS (SoR - 4.725)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH EAST CORNER - ROOF STONES (SoR-4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH EAST CORNER - KODUNGAI - (SoR-4.722)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH EAST CORNER - VYALAM (SoR-4.723)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH EAST CORNER - SALAHARAM - Chola style (SoR-4.822)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH EAST CORNER - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ARCHES

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH WEST CORNER - UPAPEETAM KAPOTHAKAM (SoR-4.713)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH WEST CORNER - ADHISTANA PADMAJAGATHI IN MUKAPATRAM (SoR-4.715)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH WEST CORNER - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - STHAMBHAVARAGAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH WEST CORNER - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH WEST CORNER - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ARCHES

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH WEST CORNER - SALAHARAM - Chola style (SoR-4.822)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH WEST CORNER -INSIDE PEETAM -PADMAJAGATHI (SoR - 4.711)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH WEST CORNER -SMALL PILLARS - CHITRA KANTA STAMBAM (SoR- 4.811)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH WEST CORNER -PODIKA - PUSHPA POTHIKA WITH 4 SIDES (SoR - 4.819)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH WEST CORNER -BEAMS - ELUDHAKAM INSIDE BEAMS (SoR - 4.725)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH WEST CORNER -ROOF STONES (SoR-4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH WEST CORNER -KODUNGAI - (SoR-4.722)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH WEST CORNER -VYALAM (SoR-4.723)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH WEST CORNER -SALAHARAM - Chola style (SoR-4.822)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SOUTH WEST CORNER - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam etc. (SoR-4.720) - ARCHES

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH EAST CORNER - UPAPEETAM KAPOTHAKAM (SoR-4.713)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH EAST CORNER - ADHISTANA PADMAJAGATHI IN MUKAPATRAM (SoR-4.715)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH EAST CORNER - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam etc. (SoR-4.720) - STHAMBHAVARAGAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH EAST CORNER - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam etc. (SoR-4.720) - PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH EAST CORNER - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam etc. (SoR-4.720) - ARCHES

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH EAST CORNER - SALAHARAM - Chola style (SoR-4.822)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH EAST CORNER - INSIDE PEETAM -PADMAJAGATHI (SoR - 4.711)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH EAST CORNER - SMALL PILLARS - CHITRA KANTA STAMBAM (SoR- 4.811)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH EAST CORNER - PODIKA - PUSHPA POTHIKA WITH 4 SIDES (SoR - 4.819)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH EAST CORNER - BEAMS - ELUDHAKAM INSIDE BEAMS (SoR - 4.725)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH EAST CORNER - ROOF STONES (SoR-4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH EAST CORNER - KODUNGAI - (SoR-4.722)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH EAST CORNER - VYALAM (SoR-4.723)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH EAST CORNER - SALAHARAM - Chola style (SoR-4.822)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH EAST CORNER - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam etc. (SoR-4.720) - ARCHES

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH WEST CORNER - UPAPEETAM KAPOTHAKAM (SoR-4.713)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH WEST CORNER - ADHISTANA PADMAJAGATHI IN MUKAPATRAM (SoR-4.715)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH WEST CORNER - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam etc. (SoR-4.720) - STHAMBHAVARAGAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH WEST CORNER - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam etc. (SoR-4.720) - PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH WEST CORNER - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam etc. (SoR-4.720) - ARCHES

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH WEST CORNER - SALAHARAM - Chola style (SoR-4.822)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH WEST CORNER - INSIDE PEETAM -PADMAJAGATHI (SoR - 4.711)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH WEST CORNER - SMALL PILLARS - CHITRA KANTA STAMBAM (SoR- 4.811)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH WEST CORNER - PODIKA - PUSHPA POTHIKA WITH 4 SIDES (SoR - 4.819)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH WEST CORNER - BEAMS - ELUDHAKAM INSIDE BEAMS (SoR - 4.725)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH WEST CORNER - ROOF STONES (SoR-4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH WEST CORNER - KODUNGAI - (SoR-4.722)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH WEST CORNER - VYALAM (SoR-4.723)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH WEST CORNER - SALAHARAM - Chola style (SoR-4.822)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - NORTH WEST CORNER - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam etc. (SoR-4.720) - ARCHES

Cost of Tool making Material like Chisels, Charcoal for furnace etc., for palmana dressing for Five line Dressing, including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.910)

Labour charged for Jointing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.913)

Supply of Granite stones of various sizes for Cut Stone Flooring works and minimum sizes of flooring 12"x24"x4" as directed by the sthapathi. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , operational, incidental charges, overheads and contractor's profit etc., complete. (SoR - 4.410)

Five line Palmana Dressing for hard granite stone not less than 12"x24" uniform size and thickness not lessthan 4" including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR -4.430)

Labour charges for Jointing for hard granite stone & soft variety including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work.- for Cut Stone Flooring works . (SoR-4.470)

Supplying and fixing of scaffolding up to 20'0" ht. including cost and conveyance of all materials such as casurina poles, bamboo mats and coir rope etc., including labour charges, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-7.100)

Hire charges for a capacity of 80 tonnes Crane, including overheads & contractors profit etc. complete for finished item of work. (for Lifting of Stone material etc.,) (R&B - SoR- Hire Charges for Machinery - sl.no-30 a)

Providing and Carving Stone Vigrahams - (i.e., Poornachitram with Sarvabharanams, Sarvaayavayams, Padadi Kereethantham) as per the drawings approved by the Sthapathi with Fine Dressing, Polishing, Both Sides Finishing, with Jeeva Rekalu including Cost and Conveyance of Suitable Variety of Black Granite Stone, Chisels, Hammers, All Materials, Labour Charges, all operational, incidental charges, overheads and contractor's profit etc., using partly with machine cutting and remaining manual finishing Complete. - Standing Posture with Four Hands above 2'-0" to 4'-0" Height (SoR-4.514)

Navatala Raja Gopuram at East Side Main Entrance

Earth work excavation and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means. - Upto 3 M depth

Filling with useful available earth by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Filling with carted gravel by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for machine mixing, laying concrete in foundations and under flooring bed, finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Footings

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Pedestals

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. -Plinth Beams

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS. - Columns - Unsupported Height -3.66m - Ground Floor

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. - Grade Slab - 150mm thk

Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal Panther) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) - Ground Floor

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 20 to 40 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 40 to 60 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 60 to 80 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 80 to 100 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - above -100 Cft

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR- 4.70)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - CHITRA VANAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - UPAPEETA UPANAM (SoR-4.713)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - UPAPEETAM KAPOTHAKAM (SoR-4.713)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ADHISTANA PADMAJAGATHI IN MUKAPATRAM (SoR-4.715)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - STHAMBHAVARGAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - INSIDE PEETAM -PADMAJAGATHI (SoR - 4.711)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - BEAMS - ELUDHAKAM INSIDE BEAMS (SoR - 4.725)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ROOF STONES (SoR-4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - PILLARS - CHITRA KANTA STAMBAM (SoR- 4.811)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ABOVE ROOF LEVEL - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - 1 KARNAKOOTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ABOVE ROOF LEVEL - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - 1 PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ABOVE ROOF LEVEL - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - 2 KARNAKOOTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ABOVE ROOF LEVEL - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - 2 PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ABOVE ROOF LEVEL - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - 3 KARNAKOOTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ABOVE ROOF LEVEL - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - 3 PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ABOVE ROOF LEVEL - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - 4 KARNAKOOTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ABOVE ROOF LEVEL - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - 4 PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ABOVE ROOF LEVEL - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - 5 KARNAKOOTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ABOVE ROOF LEVEL - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - 5 PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ABOVE ROOF LEVEL - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - 6 KARNAKOOTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ABOVE ROOF LEVEL - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - 6 PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ABOVE ROOF LEVEL - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - 7 KARNAKOOTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ABOVE ROOF LEVEL - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - 7 PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ABOVE ROOF LEVEL - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - 8 KARNAKOOTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ABOVE ROOF LEVEL - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - 8 PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ABOVE ROOF LEVEL - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - KANTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ABOVE ROOF LEVEL - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - SHIKARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ABOVE ROOF LEVEL - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - MAHANAASI

Cost of Tool making Material like Chisels, Charcoal for furnace etc., for palmana dressing for Five line Dressing, including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.910)

Labour charged for Jointing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.913)

Supplying and fixing of scaffolding up to 20'0" ht. including cost and conveyance of all materials such as casurina poles, bamboo mats and coir rope etc., including labour charges, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-7.100)

Hire charges for a capacity of 80 tonnes Crane, including overheads & contractors profit etc. complete for finished item of work. (for Lifting of Stone material etc.,) (R&B - SoR- Hire Charges for Machinery - sl.no-30 a)

Supply and fixing of metal Sthoopy with Sthoopi dandam, Brahma Randram stone, (Gandhapu Raie) including cost and conveyance of all materials and labour charges all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Copper Sthoopi Upto 5'-0" ht (16 to 18 gauge) (SoR-3.23)

Providing and Carving Stone Vigrahams - (i.e., Poornachitram with Sarvabharanams, Sarvaayavayams, Padadi Kereethantham) as per the drawings approved by the Sthapathi with Fine Dressing, Polishing, Both Sides Finishing, with Jeeva Rekalu including Cost and Conveyance of Suitable Variety of Black Granite Stone, Chisels, Hammers, All Materials, Labour Charges, all operational, incidental charges, overheads and contractor's profit etc., using partly with machine cutting and remaining manual finishing Complete for Standing Posture with Four Hands above 6'-0" Height for Dwarapalakas 1st Storey to 9th Storey (i.e., Poornachitram with Sarvabharanams, Sarvaayavayams, Padadi Kereethantham) (SoR - 4.516)

Supply of Hard granite stones of various sizes for Garbhalayam and Ardha Mandapam - Door Frame works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Door Frame upto 12'-0" to 16'-0" Height. (SoR - 4.400)

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. for Door Frames in granite stone - Garbhalayam and Ardha Mandapam (SoR- 4.70)

Door Frames - Dressing - Five Line Palmana instead of fine Dressing and polishing and padmams at top & bottom, Nagabhandam on vertical stones all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam and Ardha Mandapam (SoR- 4.391)

Labour charged for fixing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work - for Door Frames in granite stone - for Five Storied Rajagopuram (SoR - 4.393)

Supply of Granite stones of various sizes for Cut Stone Flooring works and minimum sizes of flooring 12"x24"x4" as directed by the sthapathi. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , operational, incidental charges, overheads and contractor's profit etc., complete. (SoR - 4.410)

Five line Palmana Dressing for hard granite stone not less than 12"x24" uniform size and thickness not lessthan 4" including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR -4.430)

Labour charges for Jointing for hard granite stone & soft variety including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work.- for Cut Stone Flooring works . (SoR-4.470)

Earth work excavation and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means. - Upto 3 M depth.

Filling with useful available earth by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Filling with carted gravel by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for machine mixing, laying concrete in foundations and under flooring bed, finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Footings

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Pedestals

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. - Grade Slab - 150mm thk

Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal Panther) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) - Ground Floor

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 1 to 20 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 20 to 40 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 40 to 60 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 60 to 80 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 80 to 100 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - above -100 Cft

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR- 4.70)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work.

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - UPAPEETAM KAPOTHAKAM (SoR-4.713)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ADHISTANA PADMAJAGATHI IN MUKAPATRAM (SoR-4.715)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - STHAMBHAVARGAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - INSIDE PEETAM -PADMAJAGATHI (SoR - 4.711)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - INSIDE PILLARS - CHITRA KANTA STAMBAM (SoR- 4.811)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - PODIKAS - PUSHAPOTHIKA WITH 2 SIDES (SoR - 4.817)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - BEAMS - ELUDHAKAM INSIDE BEAMS (SoR - 4.725)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ROOF STONES (SoR-4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - GOPURAM INSIDE

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - 1 KARNA KOOTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - 1 PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - 2 KARNA KOOTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - 2 PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - 3 KARNA KOOTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - 3 PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - 4 KARNA KOOTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - 4 PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - KANTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - SHIKARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - SIDE MAHA NAASI

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - NAASI TALA

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - FRONT AND REAR NAASI GUDU

Cost of Tool making Material like Chisels, Charcoal for furnace etc., for palmana dressing for Five line Dressing, including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.910)

Labour charged for Jointing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.913)

Supplying and fixing of scaffolding up to 20'0" ht. including cost and conveyance of all materials such as casurina poles, bamboo mats and coir rope etc., including labour charges, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-7.100)

Hire charges for a capacity of 80 tonnes Crane, including overheads & contractors profit etc. complete for finished item of work. (for Lifting of Stone material etc.,) (R&B - SoR- Hire Charges for Machinery - sl.no-30 a)

Providing and Carving Stone Vigrahams - (i.e., Poornachitram with Sarvabharanams, Sarvaayavayams, Padadi Kereethantham) as per the drawings approved by the Sthapathi with Fine Dressing, Polishing, Both Sides Finishing, with Jeeva Rekalu including Cost and Conveyance of Suitable Variety of Black Granite Stone, Chisels, Hammers, All Materials, Labour Charges, all operational, incidental charges, overheads and contractor's profit etc., using partly with machine cutting and remaining manual finishing Complete. - Standing Posture with Four Hands above 2'-0" to 4'-0" Height (SoR-4.514)

Supply and fixing of metal Sthoopy with Sthoopi dandam, Brahma Randram stone, (Gandhapu Raie) including cost and conveyance of all materials and labour charges all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Brass STHOOPI Upto 2'-O" ht (16 to 18 gauge) (SoR - 3.110)

Supply of Hard granite stones of various sizes for Garbhalayam and Ardha Mandapam - Door Frame works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Door Frame upto 12'-0" to 16'-0" Height. (SoR - 4.400)

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. for Door Frames in granite stone - Garbhalayam and Ardha Mandapam (SoR- 4.70)

Door Frames - Dressing - Five Line Palmana instead of fine Dressing and polishing and padmams at top & bottom, Nagabhandam on vertical stones all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam and Ardha Mandapam (SoR- 4.391)

Labour charged for fixing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work - for Door Frames in granite stone - for Five Storied Rajagopuram (SoR - 4.393)

Supply of Granite stones of various sizes for Cut Stone Flooring works and minimum sizes of flooring 12"x24"x4" as directed by the sthapathi. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , operational, incidental charges, overheads and contractor's profit etc., complete. (SoR - 4.410)

Five line Palmana Dressing for hard granite stone not less than 12"x24" uniform size and thickness not lessthan 4" including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR -4.430)

Labour charges for Jointing for hard granite stone & soft variety including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work.- for Cut Stone Flooring works . (SoR-4.470)

Earth work excavation and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means. - Upto 3 M depth

Filling with useful available earth by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Filling with carted gravel by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for machine mixing, laying concrete in foundations and under flooring bed, finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Footings

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Pedestals

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. - Grade Slab - 150mm thk

Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal Panther) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) - Ground Floor

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 1 to 20 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 20 to 40 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 40 to 60 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi)- Cost of stone - 60 to 80 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi)- Cost of stone - 80 to 100 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi)- Cost of stone - above -100 Cft

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR- 4.70)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - CHITRA VANAM (SoR -4.710)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - UPAPEETAM KAPOTHAKAM (SoR-4.713)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ADHISTANA PADMAJAGATHI IN MUKAPATRAM (SoR-4.715)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - STHAMBHAVARAGAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ROOF STONES (SoR-4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - INSIDE PEETAM -PADMAJAGATHI (SoR - 4.711)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - KARNAKOOTAM-1

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - ROOF STONES

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - KARNAKOOTAM-2

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - ROOF STONES

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - KANTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - SHIKARAM

Cost of Tool making Material like Chisels, Charcoal for furnace etc., for palmana dressing for Five line Dressing, including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.910)

Labour charged for Jointing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.913)

Supplying and fixing of scaffolding up to 20'0" ht. including cost and conveyance of all materials such as casurina poles, bamboo mats and coir rope etc., including labour charges, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-7.100)

Hire charges for a capacity of 80 tonnes Crane, including overheads & contractors profit etc. complete for finished item of work. (for Lifting of Stone material etc.,) (R&B - SoR- Hire Charges for Machinery - sl.no-30 a)

Providing and Carving Stone Vigrahams - (i.e., Poornachitram with Sarvabharanams, Sarvaayavayams, Padadi Kereethantham) as per the drawings approved by the Sthapathi with Fine Dressing, Polishing, Both Sides Finishing, with Jeeva Rekalu including Cost and Conveyance of Suitable Variety of Black Granite Stone, Chisels, Hammers, All Materials, Labour Charges, all operational, incidental charges, overheads and contractor's profit etc., using partly with machine cutting and remaining manual finishing Complete. - Standing Posture with Four Hands above 2'-0" to 4'-0" Height (SoR-4.514)

Supply and fixing of metal Sthoopy with Sthoopi dandam, Brahma Randram stone, (Gandhapu Raie) including cost and conveyance of all materials and labour charges all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Brass STHOOPI Upto 2'-O" ht (16 to 18 gauge) (SoR - 3.110)

Supply of Hard granite stones of various sizes for Garbhalayam and Ardha Mandapam - Door Frame works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Door Frame upto 9'-0" to 12'-0" Height. (SoR - 4.390)

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. for Door Frames in granite stone - Garbhalayam and Ardha Mandapam (SoR- 4.70)

Door Frames - Dressing - Five Line Palmana instead of fine Dressing and polishing and padmams at top & bottom, Nagabhandam on vertical stones all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work - Three Storied Rajagopuram

Labour charged for fixing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work - for Door Frames in granite stone - Three Storied Rajagopuram (SoR- 4.392)

Supply of Granite stones of various sizes for Cut Stone Flooring works and minimum sizes of flooring 12"x24"x4" as directed by the sthapathi. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , operational, incidental charges, overheads and contractor's profit etc., complete. (SoR - 4.410)

Five line Palmana Dressing for hard granite stone not less than 12"x24" uniform size and thickness not lessthan 4" including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR -4.430)

Labour charges for Jointing for hard granite stone & soft variety including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work.- for Cut Stone Flooring works . (SoR-4.470)

Earth work excavation and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means. - Upto 3 M depth

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for machine mixing, laying concrete in foundations and under flooring bed, finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Pedestal

Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal Panther) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) - Ground Floor

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 60 to 80 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - above -100 Cft

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR- 4.70)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Nandi Peetam-VEDIKA(SoR-4.718)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Dwajam Peetam & Balipeetam

Cost of Tool making Material like Chisels, Charcoal for furnace etc., for palmana dressing for Five line Dressing, including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.910)

Labour charged for Jointing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.913)

Earth work excavation and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means. - Upto 3 M depth

Filling with useful available earth by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Filling with carted gravel by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Providing post construction anti termite treatment by drilling 1/2 inch dia., holes at the edges of wall floor junction and pouring anti termite chemical (Imidacloprid 30.5 SC, 10.5 ml for 5 Liters of water as per IS 16131.) with a hand operated pressure pump until refusal or to a maximum of one liter per hole. Holes shall be sealed with cement motor after treatment and providing spraying and injecting termiticides for treating and applying to doors, windows, frames, removing, crusting treating in Treatment along outside of foundations (i.e.,Soil in contact with external walls around the building and Concrete or Masonry apron around the building), Treatment of soil under floors - Inside Building, Treatment to voids in masonry, Treatment at points of contact of woodwork, Treatment of Wood Work, Treatment of Electrical Fixtures, as directed in IS 6313 Part 3 2013 with preventive chemicals duly taking precautions for health hazards and safety measures for the occupants including all costs, conveyances of all materials and labour charges,overheads and contractors profit etc complete for finished item of work to the satisfaction of the Engineer-in-Charge. The plinth area of the building each floor shall be taken for the purpose of payment.

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for machine mixing, laying concrete in foundations and under flooring bed, finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Footings

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Pedestals

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Plinth Beams

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS. - Columns - un-supported height of 3.66m - Ground Floor

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. - Grade Slab -150mm thk

Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal Panther) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) - Ground Floor

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 1 to 20 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 20 to 40 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 40 to 60 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 60 to 80 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 80 to 100 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - above -100 Cft

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR- 4.70)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ALLROUND PEETAM - PADMAJAGATHI (SoR - 4.711)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - UPAPEETAM KANTAM(SoR-4.715)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work.- ADHISTANAMJAGATHI (PLAIN)(SoR-4.714)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - STHAMBHAVARGAM L-1

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - STHAMBHAVARGAM L-2

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - UTTARAVARGAM-UTTARAM ELUDHAKAM(SoR-4.721)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - KAPODAKAM(SoR-4.722)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - VYALAM(SoR-4.723)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ROOF STONES:-(SoR-4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - KARNAKOOTAM VEDIKA & KANTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - SMALL PRASTARAM & SMALL KANTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ULNATYA KANTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - UTTARA VARHGAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - KAPODAKAM AND VYALAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - VEDIKA AND KANTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - SMALL PRASTARAM & SMALL KANTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ULNATYA KANTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - VEDIKA

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - KANTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - SHIKARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - MAHANAASI AND ALPANAASI

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - CHITRAVANAM ALLROUND PEETAM-PADMA JAGATHI(SoR-4.711)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - PILLARS- CHITRA KANTA STAMBAM (SoR- 4.811)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - BEAMS- ELUDHAKAM INSIDE BEAMS (SoR - 4.725)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - MANDAPAM SPAN ROOF STONES(SoR-4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - KONAVATTAM STONES-(SoR-4.724)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - KODUNGAI (SoR-4.722)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - VYALAM & SALAHARAM chola style(SoR-4.822)

Cost of Tool making Material like Chisels, Charcoal for furnace etc., for palmana dressing for Five line Dressing, including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.910)

Labour charged for Jointing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.913)

Supplying and fixing of Somasutram with yalitala upto 3'6" to 4'6" length (Black granite stone) including fine dressing and polishing to the shape and dimensions as per approved drawings including cost and conveyance of all materials and labour charges etc complete for finished item of work.

Supplying and fixing of Balipeetam upto 1'0" height(Black granite stone) including fine dressing and polishing to the shape and dimensions as per approved drawings including cost and conveyance of all materials and labour charges etc complete for finished item of work.

Supplying and fixing of scaffolding up to 20'0" ht. including cost and conveyance of all materials such as casurina poles, bamboo mats and coir rope etc., including labour charges etc., compete

Supply and fixing of metal Sthoopy with Sthoopi dandam, Brahma Randram stone, (Gandhapu Raie) including cost and conveyance of all materials and labour charges all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Copper Sthoopi - Upto 4'-0" Height (16 to 18 gauge) (SoR- 3.23)

Hire charges for a capacity of 80 tonnes Crane, including overheads & contractors profit etc. complete for finished item of work. (for Lifting of Stone material etc.,) (R&B - SoR- Hire Charges for Machinery - sl.no-30 a)

Supply of Hard granite stones of various sizes for Garbhalayam and Ardha Mandapam - Door Frame works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Door Frame above 7'-0" Height (SoR- 4.330)

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. for Door Frames in granite stone - Garbhalayam and Ardha Mandapam (SoR- 4.70)

Door Frames - Dressing - Five Line Palmana instead of fine Dressing and polishing and padmams at top & bottom, Nagabhandam on vertical stones all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam and Ardha Mandapam (SoR- 4.340)

Labour charged for fixing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work - for Door Frames in granite stone - Above 7'-0" to 9'-0" Height

Supply of Granite stones of various sizes for Cut Stone Flooring works and minimum sizes of flooring 12"x24"x4" as directed by the sthapathi. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , operational, incidental charges, overheads and contractor's profit etc., complete. (SoR - 4.410)

Five line Palmana Dressing for hard granite stone not less than 12"x24" uniform size and thickness not lessthan 4" including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR -4.430)

Labout charges for Jointing for hard granite stone & soft variety including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work.- for Cut Stone Flooring works . (SoR-4.470)

Supply & fixing of best Teak Wood Ornamental door shutters with two leaves as per standard temple design includig cost of frame and planks and preparation charges. Fixing of shutters in position locking arrangements etc., complete. Door shutter with Best Teak Wood frame of 2" thick, Single Padmams of 2.5" thick and Best Teak Wood rare plank of thickness 1.5" - including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work - Material Charges

Supply & fixing of best Teak Wood Ornamental door shutters with two leaves as per standard temple design includig cost of frame and planks and preparation charges. Fixing of shutters in position locking arrangements etc., complete. Door shutter with Best Teak Wood frame of 2" thick, Single Padmams of 2.5" thick and Best Teak Wood rare plank of thickness 1.5" - including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work - Labour Charges

Carving Stone Vigrahams - Standing Posture with Four Hands above 2'-0" to 4'-0" Height (i.e., Poornachitram with Sarvabharanams, Sarvaayavayams, Padadi Kereethantham) as per the drawing approved by the Sthapathi with Fine Dressing, Polishing, Both Sides Finishing, with Jeeva Rekalu including Cost and Conveyance of Suitable Variety of Black Granite Stone, Chisels, Hammers, All Materials, Labour Charges etc,using partly with machine cutting and remaining manual. including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work.(SoR-4.514)

Earth work excavation and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means. - Upto 3 M depth

Filling with useful available earth by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Filling with carted gravel by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Providing post construction anti termite treatment by drilling 1/2 inch dia., holes at the edges of wall floor junction and pouring anti termite chemical (Imidacloprid 30.5 SC, 10.5 ml for 5 Liters of water as per IS 16131.) with a hand operated pressure pump until refusal or to a maximum of one liter per hole. Holes shall be sealed with cement motor after treatment and providing spraying and injecting termiticides for treating and applying to doors, windows, frames, removing, crusting treating in Treatment along outside of foundations (i.e.,Soil in contact with external walls around the building and Concrete or Masonry apron around the building), Treatment of soil under floors - Inside Building, Treatment to voids in masonry, Treatment at points of contact of woodwork, Treatment of Wood Work, Treatment of Electrical Fixtures, as directed in IS 6313 Part 3 2013 with preventive chemicals duly taking precautions for health hazards and safety measures for the occupants including all costs, conveyances of all materials and labour charges,overheads and contractors profit etc complete for finished item of work to the satisfaction of the Engineer-in-Charge. The plinth area of the building each floor shall be taken for the purpose of payment.

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for machine mixing, laying concrete in foundations and under flooring bed, finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Footings

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Pedestals

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Plinth Beams

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS. - Columns - Unsupported Height -3.66m - Ground Floor

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. - Grade Slab -150mm thk

Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal Panther) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) - Ground Floor

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 1 to 20 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 20 to 40 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 40 to 60 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 60 to 80 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - above -100 Cft

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR- 4.70)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - LAYER-1 UPAPEETAM KAPOTHAKAM (SoR-4.713)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - LAYER-2 ADHISTANA JAGATHI PLAIN (SoR-4.714)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - LAYER-3 ADHISTANA KUMUDAKAM (SoR-4.716)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - LAYER-4 ADHISTANA PATTIKA & VEDIKA (SoR-4.717)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - LAYER-5 STHAMBHAVARGAM-1

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - LAYER-6 STHAMBHAVARGAM-2

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - LAYER-7 UTTARAVARGAM (SoR-4.721)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - LAYER-8 KAPODAKAM (SoR-4.722)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - LAYER-9 VYALAM (SoR-4.723)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ROOF STONE S:- KONAVATTAM (SoR-4.724)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - CHATURAVATTAM (SoR-4.724)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - KONAVATTAM (SoR-4.724)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - COVERING STONE-VYALAM (SoR-4.723)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - GARBHALAYAM INSIDE (SoR-4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - GARBHALAYAM STEPS (SoR-4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - LAYER-10 KARNAKOOTA VEDIKA

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - LAYER-11 KARNAKOOTA KANTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - LAYER-12 KARNAKOOTA KAPODAKAM KANTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - LAYER-13 KARNAKOOTA ULNATYAKANTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - LAYER-14 UTTARA VARGAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - LAYER-15 KAPODAKAM & VYALAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - LAYER-16 VEDIKA

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - LAYER-17 KANTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - LAYER-18 ALAMBANAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - LAYER-19 SHIKARAM ALUNGU

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - LAYER-20 MAHAPADMAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - PILLARS - ASWAPADAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - PILLARS - PILLAR- CHITRA KANTA STAMBAM (SoR- 4.811)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - PILLARS - PALIKAPADMAM & KUDAM - CHITRA KANTA STAMBAM (SoR- 4.811)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - PILLARS - PODIKAS L SHAPE-PUSHPODIKA WITH 2 SIDES

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - PILLARS - PODIKAS T SHAPE-PUSHPODIKA WITH 3 SIDES

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - PILLARS - PODIKAS + SHAPE-PUSHPODIKA WITH 4 SIDES

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM UTTARA BEAMS - HORIZONTAL & VERTICAL BEAMS ELUDHAKAM INSIDE BEAMS (SoR - 4.725)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - KODUNGAI - (SoR-4.722)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - VYALAM - (SoR-4.723)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM SALAHARAM:- Chola style (SoR-4.822)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM ROOF STONES:- (SoR-4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MOOSHIKAM PEETAM(SoR-4.718)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - BALIPEETA PEETAM(SoR-4.718)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - DWAJAM PEETAM(SoR-4.718)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - STEPS-(SoR-4.726)

Cost of Tool making Material like Chisels, Charcoal for furnace etc., for palmana dressing for Five line Dressing, including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.910)

Labour charged for Jointing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.913)

Supplying and fixing of Somasutram with yalitala upto 3'6" to 4'6" length (Black granite stone) including fine dressing and polishing to the shape and dimensions as per approved drawings including cost and conveyance of all materials and labour charges etc complete for finished item of work.

Supplying and fixing of Balipeetam upto 1'0" height(Black granite stone) including fine dressing and polishing to the shape and dimensions as per approved drawings including cost and conveyance of all materials and labour charges etc complete for finished item of work.

Supplying and fixing of scaffolding up to 20'0" ht. including cost and conveyance of all materials such as casurina poles, bamboo mats and coir rope etc., including labour charges, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-7.100)

Hire charges for a capacity of 80 tonnes Crane, including overheads & contractors profit etc. complete for finished item of work. (for Lifting of Stone material etc.,) (R&B - SoR- Hire Charges for Machinery - sl.no-30 a)

Supply of Hard granite stones of various sizes for Garbhalayam and Ardha Mandapam - Door Frame works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Door Frame above 7'-0" Height (SoR- 4.330)

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. for Door Frames in granite stone - Garbhalayam and Ardha Mandapam (SoR- 4.70)

Door Frames - Dressing - Five Line Palmana instead of fine Dressing and polishing and padmams at top & bottom, Nagabhandam on vertical stones all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam and Ardha Mandapam (SoR- 4.340)

Labour charged for fixing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work - for Door Frames in granite stone - Above 7'-0" to 9'-0" Height

Supply of Granite stones of various sizes for Cut Stone Flooring works and minimum sizes of flooring 12"x24"x4" as directed by the sthapathi. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , operational, incidental charges, overheads and contractor's profit etc., complete. (SoR - 4.410)

Five line Palmana Dressing for hard granite stone not less than 12"x24" uniform size and thickness not lessthan 4" including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR -4.430)

Labout charges for Jointing for hard granite stone & soft variety including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work.- for Cut Stone Flooring works . (SoR-4.470)

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Pedestals

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. - Grade Slab -150mm thk

Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal Panther) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) - Ground Floor

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 1 to 20 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 20 to 40 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 40 to 60 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 60 to 80 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - above 100 Cft

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR- 4.70)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Grabhalayam - UPAPEETAM KAPOTHAKAM (SoR-4.713)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Grabhalayam - ADHISTANA PADMAJAGATHI IN MUKAPATRAM (SoR-4.715)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Grabhalayam - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - STHAMBHAVARGAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Grabhalayam - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Grabhalayam - ROOF STONES KONAVATTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Grabhalayam - CHATURA VATTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Grabhalayam - COVERING STONE

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Grabhalayam - STEPS

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Grabhalayam - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - 1 KARNAKOOTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Grabhalayam - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - 1 PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Grabhalayam - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - KANTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Grabhalayam - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - SHIKARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - ALLROUND PEETAM - PADMAJAGATHI (SoR - 4.711)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - PILLARS - CHITRA KANTA STAMBAM (SoR- 4.811)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - PODIKAS - PUSHPA POTHIKA WITH 4 SIDES (SoR - 4.819)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - BEAMS HORIZONTAL - ELUDHAKAM INSIDE BEAMS (SoR - 4.725)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - BEAMS VERTICAL - ELUDHAKAM INSIDE BEAMS (SoR - 4.725)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - KODUNGAI - (SoR-4.722)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - VYALAM (SoR-4.723)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - SALAHARAM - Chola style (SoR-4.822)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ARCHES

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM - ROOF STONES:- (SoR-4.726)

Cost of Tool making Material like Chisels, Charcoal for furnace etc., for palmana dressing for Five line Dressing, including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.910)

Labour charged for Jointing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.913)

Supplying and fixing of scaffolding up to 20'0" ht. including cost and conveyance of all materials such as casurina poles, bamboo mats and coir rope etc., including labour charges, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-7.100)

Hire charges for a capacity of 80 tonnes Crane, including overheads & contractors profit etc. complete for finished item of work. (for Lifting of Stone material etc.,) (R&B - SoR- Hire Charges for Machinery - sl.no-30 a)

Supply of Hard granite stones of various sizes for Garbhalayam and Ardha Mandapam - Door Frame works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Door Frame above 7'-0" Height (SoR- 4.330)

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. for Door Frames in granite stone - Garbhalayam and Ardha Mandapam (SoR- 4.70)

Door Frames - Dressing - Five Line Palmana instead of fine Dressing and polishing and padmams at top & bottom, Nagabhandam on vertical stones all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam and Ardha Mandapam (SoR- 4.340)

Labour charged for fixing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work - for Door Frames in granite stone - Above 7'-0" to 9'-0" Height

Supply of Granite stones of various sizes for Cut Stone Flooring works and minimum sizes of flooring 12"x24"x4" as directed by the sthapathi. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , operational, incidental charges, overheads and contractor's profit etc., complete. (SoR - 4.410)

Five line Palmana Dressing for hard granite stone not less than 12"x24" uniform size and thickness not lessthan 4" including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR -4.430)

Labout charges for Jointing for hard granite stone & soft variety including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work.- for Cut Stone Flooring works . (SoR-4.470)

Providing and Carving Stone Vigrahams - Standing Posture with Four Hands above 2'-0" to 4'-0" Height (i.e., Poornachitram with Sarvabharanams, Sarvaayavayams, Padadi Kereethantham) as per the drawing approved by the Sthapathi with Fine Dressing, Polishing, both sides finishing with Jeeva rekalu, including cost and conveyance of suitable variety of black granite stone, chisels, hammers, all materials, labour charges etc, using partly with machine cutting and remaining manual finishing complete for finished item of work

Earth work excavation and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means. - Upto 3 M depth

Filling with useful available earth by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Filling with carted gravel by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Providing post construction anti termite treatment by drilling 1/2 inch dia., holes at the edges of wall floor junction and pouring anti termite chemical (Imidacloprid 30.5 SC, 10.5 ml for 5 Liters of water as per IS 16131.) with a hand operated pressure pump until refusal or to a maximum of one liter per hole. Holes shall be sealed with cement motor after treatment and providing spraying and injecting termiticides for treating and applying to doors, windows, frames, removing, crusting treating in Treatment along outside of foundations (i.e.,Soil in contact with external walls around the building and Concrete or Masonry apron around the building), Treatment of soil under floors - Inside Building, Treatment to voids in masonry, Treatment at points of contact of woodwork, Treatment of Wood Work, Treatment of Electrical Fixtures, as directed in IS 6313 Part 3 2013 with preventive chemicals duly taking precautions for health hazards and safety measures for the occupants including all costs, conveyances of all materials and labour charges,overheads and contractors profit etc complete for finished item of work to the satisfaction of the Engineer-in-Charge. The plinth area of the building each floor shall be taken for the purpose of payment.

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for machine mixing, laying concrete in foundations and under flooring bed, finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Footings

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Plinth Beams

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS. - Columns - Unsupported Height -3.66m - Ground Floor

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. - Grade Slab -150mm thk

Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal Panther) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) - Ground Floor

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 1 to 20 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi)- Cost of stone - 20 to 40 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 40 to 60 Cft

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR- 4.70)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ALLROUND PEETAM-VEDIKA(Sor 4.718)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - SMALL PILLARS- - CHITRA KANTA STAMBAM (SoR- 4.811)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ASWAPADAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - HIGH ROOF PODIKAS -PUSHPODIKA WITH 2 SIDES

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - LOW ROOF PODIKAS L SHAPE-PUSHPODIKA WITH 2 SIDES

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work.- LOW ROOF PODIKAS T SHAPE-PUSHPODIKA WITH 3 SIDES

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - LOW ROOF PODIKAS + SHAPE-PUSHPODIKA WITH 4 SIDES

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - PILLAR STONE - CHITRA KANTA STAMBAM (SoR- 4.811)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work.- PALIKAPADAMAM - CHITRA KANTA STAMBAM (SoR- 4.811)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - BEAMS-EDULAKAM INSIDE BEAMS(SoR 4.725)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - KODUNGAI STONES (LOW ROOF ) TOP (SoR-4.722)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - KODUNGAI STONES (LOW ROOF ) BOTTOM -VYALAM (SoR-4.723)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - KODUNGAI STONES (HIGH ROOF) TOP (SoR-4.722)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - KODUNGAI STONES (HIGH ROOF) TOP- VYALAM(SoR-4.723)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM ROOF STONES (INCL HIGH ROOF)(SoR-4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - VYALAM(SoR-4.723)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - STEPS

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - MANDAPAM PARAPET WALL-PUSHPAPODIKA WITH 1 SIDE(SoR 4.816)

Cost of Tool making Material like Chisels, Charcoal for furnace etc., for palmana dressing for Five line Dressing, including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.910)

Labour charged for Jointing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.913)

Supplying and fixing of scaffolding up to 20'0" ht. including cost and conveyance of all materials such as casurina poles, bamboo mats and coir rope etc., including labour charges, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-7.100)

Hire charges for a capacity of 80 tonnes Crane, including overheads & contractors profit etc. complete for finished item of work. (for Lifting of Stone material etc.,) (R&B - SoR- Hire Charges for Machinery - sl.no-30 a)

Supply of Granite stones of various sizes for Cut Stone Flooring works and minimum sizes of flooring 12"x24"x4" as directed by the sthapathi. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , operational, incidental charges, overheads and contractor's profit etc., complete. (SoR - 4.410)

Five line Palmana Dressing for hard granite stone not less than 12"x24" uniform size and thickness not lessthan 4" including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR -4.430)

Labout charges for Jointing for hard granite stone & soft variety including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work.- for Cut Stone Flooring works . (SoR-4.470)

Earth work excavation and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means. - Upto 3 M depth

Filling with useful available earth by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Filling with carted gravel by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for machine mixing, laying concrete in foundations and under flooring bed, finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Footings

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Plinth Beams

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS. - Columns - un-supported height of 3.66m - Ground Floor

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. - Grade Slab -150mm thk

Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal Panther) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) - Ground Floor

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 40 to 60 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 60 to 80 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - above -100 Cft

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR- 4.70)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - UPAPEETAM KAPOTHAKAM (SoR-4.713)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - PILLARS- CHITRA KANTA STAMBAM (SoR- 4.811)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - PODIKA-PUSHPODIKA WITH 4 SIDES (SoR-4.819)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work.- UTTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - PADMA SHIKARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work.- ROOF STONES(SoR 4.726)

Cost of Tool making Material like Chisels, Charcoal for furnace etc., for palmana dressing for Five line Dressing, including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.910)

Labour charged for Jointing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.913)

Supplying and fixing of scaffolding up to 20'0" ht. including cost and conveyance of all materials such as casurina poles, bamboo mats and coir rope etc., including labour charges, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-7.100)

Hire charges for a capacity of 80 tonnes Crane, including overheads & contractors profit etc. complete for finished item of work. (for Lifting of Stone material etc.,) (R&B - SoR- Hire Charges for Machinery - sl.no-30 a)

Supply and fixing of metal Sthoopy with Sthoopi dandam, Brahma Randram stone, (Gandhapu Raie) including cost and conveyance of all materials and labour charges all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Copper Sthoopi - Upto 2'-0" Height (18 to 20 gauge) (SoR- 3.11)

Supply of Granite stones of various sizes for Cut Stone Flooring works and minimum sizes of flooring 12"x24"x4" as directed by the sthapathi. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , operational, incidental charges, overheads and contractor's profit etc., complete. (SoR - 4.410)

Five line Palmana Dressing for hard granite stone not less than 12"x24" uniform size and thickness not lessthan 4" including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR -4.430)

Labout charges for Jointing for hard granite stone & soft variety including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work.- for Cut Stone Flooring works . (SoR-4.470)

Earth work excavation and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means. - Upto 3 M depth

Filling with useful available earth by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Filling with carted gravel by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Providing post construction anti termite treatment by drilling 1/2 inch dia., holes at the edges of wall floor junction and pouring anti termite chemical (Imidacloprid 30.5 SC, 10.5 ml for 5 Liters of water as per IS 16131.) with a hand operated pressure pump until refusal or to a maximum of one liter per hole. Holes shall be sealed with cement motor after treatment and providing spraying and injecting termiticides for treating and applying to doors, windows, frames, removing, crusting treating in Treatment along outside of foundations (i.e.,Soil in contact with external walls around the building and Concrete or Masonry apron around the building), Treatment of soil under floors - Inside Building, Treatment to voids in masonry, Treatment at points of contact of woodwork, Treatment of Wood Work, Treatment of Electrical Fixtures, as directed in IS 6313 Part 3 2013 with preventive chemicals duly taking precautions for health hazards and safety measures for the occupants including all costs, conveyances of all materials and labour charges,overheads and contractors profit etc complete for finished item of work to the satisfaction of the Engineer-in-Charge. The plinth area of the building each floor shall be taken for the purpose of payment.

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for machine mixing, laying concrete in foundations and under flooring bed, finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Footings

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Pedestals

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Plinth Beams

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS. - Columns - un-supported height of 3.66m - Ground Floor

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. - Grade Slab -150mm thk

Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal Panther) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) - Ground Floor

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 1 to 20 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 20 to 40 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 40 to 60 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 60 to 80 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - above -100 Cft

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR- 4.70)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam - UPAPEETAM KAPOTHAKAM (SoR-4.713)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam - ADHISTANA PADMAJAGATHI IN MUKAPATRAM (SoR-4.715)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - STHAMBHAVARGAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam - ROOF STONES (SoR-4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam - CHATURA VATTAM (SoR-4.724)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam - COVERING STONE

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam - STEPS

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - 1 KARNAKOOTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - 1 PRASTARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - KANTAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - ABOVE ROOF LEVEL - SHIKARAM

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Mandapam - ALLROUND PEETAM - PADMAJAGATHI (SoR - 4.711)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Mandapam - SMALL PILLARS - CHITRA KANTA STAMBAM (SoR- 4.811)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Mandapam - PODIKA - PUSHPA POTHIKA WITH 4 SIDES (SoR - 4.819)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Mandapam - BEAMS -H - ELUDHAKAM INSIDE BEAMS (SoR - 4.725)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Mandapam - BEAMS-V - ELUDHAKAM INSIDE BEAMS (SoR - 4.725)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Mandapam - KODUNGAI - (SoR-4.722)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Mandapam - VYALAM (SoR-4.723)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Mandapam - SALAHARAM - Chola style (SoR-4.822)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Ornamental stambhavargam with vargams i.e., pothika, veera kantam, palikapadam, kantam, kudam, asyam, heeram, vrutham, mukulam, kalasam, kattu, malasthanam, aswapadm, vigrahasthanam, kattu, Nagabandam. (SoR-4.720) - Mandapam - ARCHES

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - ROOF STONES (SoR-4.726)

Cost of Tool making Material like Chisels, Charcoal for furnace etc., for palmana dressing for Five line Dressing, including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.910)

Labour charged for Jointing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.913)

Supplying and fixing of scaffolding up to 20'0" ht. including cost and conveyance of all materials such as casurina poles, bamboo mats and coir rope etc., including labour charges, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-7.100)

Hire charges for a capacity of 80 tonnes Crane, including overheads & contractors profit etc. complete for finished item of work. (for Lifting of Stone material etc.,) (R&B - SoR- Hire Charges for Machinery - sl.no-30 a)

Supply of Hard granite stones of various sizes for Garbhalayam and Ardha Mandapam - Door Frame works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Door Frame above 7'-0" Height (SoR- 4.330)

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. for Door Frames in granite stone - Garbhalayam and Ardha Mandapam (SoR- 4.70)

Door Frames - Dressing - Five Line Palmana instead of fine Dressing and polishing and padmams at top & bottom, Nagabhandam on vertical stones all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. - Garbhalayam and Ardha Mandapam (SoR- 4.340)

Labour charged for fixing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work - for Door Frames in granite stone - Above 7'-0" to 9'-0" Height

Supply of Granite stones of various sizes for Cut Stone Flooring works and minimum sizes of flooring 12"x24"x4" as directed by the sthapathi. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , operational, incidental charges, overheads and contractor's profit etc., complete. (SoR - 4.410)

Five line Palmana Dressing for hard granite stone not less than 12"x24" uniform size and thickness not lessthan 4" including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR -4.430)

Labout charges for Jointing for hard granite stone & soft variety including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work.- for Cut Stone Flooring works . (SoR-4.470)

Providing and Carving Stone Vigrahams - (i.e., Poornachitram with Sarvabharanams, Sarvaayavayams, Padadi Kereethantham) as per the drawings approved by the Sthapathi with Fine Dressing, Polishing, Both Sides Finishing, with Jeeva Rekalu including Cost and Conveyance of Suitable Variety of Black Granite Stone, Chisels, Hammers, All Materials, Labour Charges, all operational, incidental charges, overheads and contractor's profit etc., using partly with machine cutting and remaining manual finishing Complete. - Standing Posture with Four Hands above 2'-0" to 4'-0" Height (SoR-4.514)

Earth work excavation and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means. - Upto 3 M depth

Filling with useful available earth by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Filling with carted gravel by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Providing post construction anti termite treatment by drilling 1/2 inch dia., holes at the edges of wall floor junction and pouring anti termite chemical (Imidacloprid 30.5 SC, 10.5 ml for 5 Liters of water as per IS 16131.) with a hand operated pressure pump until refusal or to a maximum of one liter per hole. Holes shall be sealed with cement motor after treatment and providing spraying and injecting termiticides for treating and applying to doors, windows, frames, removing, crusting treating in Treatment along outside of foundations (i.e.,Soil in contact with external walls around the building and Concrete or Masonry apron around the building), Treatment of soil under floors - Inside Building, Treatment to voids in masonry, Treatment at points of contact of woodwork, Treatment of Wood Work, Treatment of Electrical Fixtures, as directed in IS 6313 Part 3 2013 with preventive chemicals duly taking precautions for health hazards and safety measures for the occupants including all costs, conveyances of all materials and labour charges,overheads and contractors profit etc complete for finished item of work to the satisfaction of the Engineer-in-Charge. The plinth area of the building each floor shall be taken for the purpose of payment.

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for machine mixing, laying concrete in foundations and under flooring bed, finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps.- Footings

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Plinth Beams

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS. - Columns - un-supported height of 3.66m - Ground Floor

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. - Grade Slab - 150mm thk

Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal Panther) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) - Ground Floor

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 1 to 20 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 20 to 40 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - 40 to 60 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi)- Cost of stone - 60 to 80 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi)- Cost of stone - 80 to 100 Cft

Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site, all operational, incidental charges, overheads and contractor's profit etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Cost of stone - Above 100 Cft

Rough Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR- 4.70)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. -MANDAPAM - CHITRAVANAM- (Sor- 4.710)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. -MANDAPAM - ALLROUND PEETAM - PADMAJAGATHI (SoR - 4.711)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. -MANDAPAM - INSIDE (SoR - 4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. -MANDAPAM - INSIDE PLANE PEETAM-PADMAJAGATHI (SoR - 4.711)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. -MANDAPAM - SMALL PILLARS - CHITRA KANTA STAMBAM (SoR- 4.811)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. -MANDAPAM - PODIKA - PUSHPA POTHIKA WITH 4 SIDES (SoR - 4.819)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. -MANDAPAM - BEAMS-ELUDHAKAM INSIDE BEAMS (SoR - 4.725)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. -MANDAPAM - ROOF STONES (SoR-4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. -MANDAPAM - KONAVATTAM STONES (SoR- 4.724)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. -MANDAPAM - CHADURAVATTAM (SoR- 4.724)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. -MANDAPAM - ROOF STONES (SoR-4.726)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. -MANDAPAM - KODUNGAI (SoR-4.722)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. -MANDAPAM - VYALAM (SoR-4.723)

Palmana Dressing of vargams using both machine cutting and manual dressing, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. -MANDAPAM - SALAHARAM - Chola style (SoR-4.822)

Cost of Tool making Material like Chisels, Charcoal for furnace etc., for palmana dressing for Five line Dressing, including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.910)

Labour charged for Jointing including all incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-4.913)

Supply of Granite stones of various sizes for Cut Stone Flooring works and minimum sizes of flooring 12"x24"x4" as directed by the sthapathi. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , operational, incidental charges, overheads and contractor's profit etc., complete. (SoR - 4.410)

Five line Palmana Dressing for hard granite stone not less than 12"x24" uniform size and thickness not lessthan 4" including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR -4.430)

Labout charges for Jointing for hard granite stone & soft variety including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work.- for Cut Stone Flooring works . (SoR-4.470)

Supplying and fixing of scaffolding up to 20'0" ht. including cost and conveyance of all materials such as casurina poles, bamboo mats and coir rope etc., including labour charges, all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR-7.100)

Hire charges for a capacity of 80 tonnes Crane, including overheads & contractors profit etc. complete for finished item of work. (for Lifting of Stone material etc.,) (R&B - SoR- Hire Charges for Machinery - sl.no-30 a)

Earth work excavation and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means. - Upto 3 M depth

Filling with useful available earth by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Filling with carted gravel by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for machine mixing, laying concrete in foundations and under flooring bed, finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Footings

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Plinth Beams

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS. - Columns - un-supported height of 3.66m - Ground Floor

Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal Panther) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) - Ground Floor

Earth work excavation and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means. - Upto 3 M depth

Filling with useful available earth by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for machine mixing, laying concrete in foundations and under flooring bed, finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Footings

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS. - RCC walls 375mm thk - un-supported height of 3.66m - Ground Floor

Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal Panther) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) - Ground Floor

Supply of Granite stones of various sizes for Cut Stone Flooring works and minimum sizes of flooring 12"x24"x4" as directed by the sthapathi. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , operational, incidental charges, overheads and contractor's profit etc., complete. (SoR - 4.410)

Five line Palmana Dressing for hard granite stone not less than 12"x24" uniform size and thickness not lessthan 4" including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work. (SoR -4.430)

Labout charges for Jointing for hard granite stone & soft variety including all operational, incidental charges, overheads and contractor's profit etc., complete for finished item of work.- for Cut Stone Flooring works . (SoR-4.470)

Earth work excavation and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means. - Upto 3 M depth

Filling with useful available earth by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Filling with carted gravel by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for machine mixing, laying concrete in foundations and under flooring bed, finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING

Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 usingusing Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - Footings