Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.5 LAccepted-AOC MURSTEY COLONY PLOT NO 16 LEH 194101 LADAKH | LEH LADAKH | LADAKH | 194101 | L1 | Accepted-AOC Lowest | |
| 2 | L2₹6.9 L+₹2.4 L (52.9%)Rejected-Finance | L2 | Rejected-Finance Other than lowest |
Tender Value
₹4.8 L
EMD Value
₹9,700
Closing Date
20 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER (AF) THOISE
GARRISON ENGINEER (AF) THOISE 19 FBSU, c/o 56 APO, PIN 937219
ADDITION/ALTERATION TO BUILDING NO T-115 AT AF STN THOISE UNDER GE (AF) THOISE
2023_MES_575528_1
GEAF/T-28/2022-23
Open Tender
Civil Works
Item Rate
180 days
GARRISON ENGINEER (AF) THOISE
As per tender document
7 documents required · 7 mandatory
₹500
GE AF Thoise
₹9,700
Yes
27 Mar 2023
18 Jan 2023
22 Feb 2023
18 Jan 2023
20 Feb 2023
1 Feb 2023
Amount
Demolition PCC block or stone/ boulder masonary built in cement mortar complete all as specified and directed by Engineer in charge.
Demolition of cement concrete (Reinforced) of Roofs, floors (other than ground floors), beams, staircases, landing,chajjas and similar suspended work complete all as specified and directed by Engineer in charge.
Dismantling framed trusses span n. exc 10 mtr complete all as specified and directed by Engineer in charge.
Dismantling plain or corrugated steel sheeting any gauge, thickness, including nainital or similar pattern roof covering etc complete all as specified and directed by Engineer in charge.
Dismantling of boarding any description fixed in any position with nails etc complete all as specified and directed by Engineer in charge.
Taking down chowkhat or frame with shutters (without taking off shutter from frame) 1.5 Sqm but not exceeding 4 Sqm each complete all as specified by Engineer in charge.
M & L for Precast Cement Concrete Block Masonry with solid block, Type C1 1:3:6 (using 20 mm graded crushed stone aggregate) exc 10 cm in width and setting in cement mortar 1: 6 complete all as specified and directed by Engineer in charge.
M&L for rendering 10 mm thick on of brick work or concrete surfaces in CM 1:6 finished even and smooth with out using extra cement complete all as specified and directed by Engineer in charge.
S & F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. of Fe 410W (Grade E- 250 ) Quality A, including for cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing and fitting angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing complete all as specified and directed by Engineer in charge.
S & F anodised aluminium snap grid of size 605 x 605 mm frame work for false ceiling incuding hangers 6mm dia (upto 1200 mm lenth) adjusting level fixed to roof slab / roof truss by means of ceiling cleats made out of GI flats 40x mm size 60 mm long and expension hold faseners 12.5 mm dia and 40 mm long and fixing Gypsum board 12mm thick in that as per manufacturer instruction complete all as specified and directed by Engineer in charge.
S&F 0.63 mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts in roofs, walls etc. with grade of zinc coating 275, etc complete all as specified and directed by Engineer in charge.
S&F 0.63 mm thick plain Galvanised, mild steel sheeting in ridges, hips, valley gutters, drip, straight flashings (length and girth as fixed) & fixed with L-type or J-type or cranked hook bolts in lieu of screw in roofs, walls etc. with grade of zinc coating 275 etc complete all as specified and directed by Engineer in charge.
M&L for preparation of new zinc (or galvanised) camouflage pattern surfaces to receive painting, by a coating with moderant solution including washing and cleaning and applying two coats of synthetic enamel paint over a coat of zinc crome red oxide in camouflage pattern etc complete all as specified and directed by Engineer in charge. Note: The pattern of camouflaging shall be got approved by GE.
M&L for PCC (1:2:4) Type B-1, Plain cement concrete with using 20mm graded aggregate in lintels upto 1.5 m clear span, copings, bed plates, cills, steps: seismic and other similar bands, plinth course, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, complete all as specified and directed by Engineer in charge.
Taking down and refixing in other opening of chowkhat or frame with shutters (without taking off shutter from frame) 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed by Engineer in charge.
M&L for preparation of structural steel work surfaces to receive painting, by a coating with moderant solution including washing and cleaning and applying two coats of synthetic enamel paint over a coat of zinc crome red oxide complete all as specified and directed by Engineer in charge.
M&L for preparation old or previously decorated wooden surface of any description, not otherwise described over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed by Engineer in charge.
M&L two coats of oil bound distemper over a coat of chalk whitening including preparation ofnewly plastered surface complete all as specified and directed by Engineer in charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premise complete all as specified and directed by Engineer in charge.
M& L Non Skid ceramic joint free coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, over and including15 mm thick screed bed in cm 1:4 in floors etc. set and joint free in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engineer in charge.
M &L Point wiring complete with 1100 volts grade PVC insulated unsheathed FRLS cable of copper conductor, multi stranded of size 1.5 sqmm, single core, in and including rigid non-metallic PVC conealed conduit, medium grade of suitable size (not less than 20mm dia) duly ISI marked with all accessories such as bends,reducers, spacers, saddles, junction boxes bakelite sheets, wooden rectangular boards / round blocks(for housing lamp holders and sketch fittings etc) and new MS pressed steel / cast iron sunken boxes of suitable size for mounting switches / bell pushes / sockets, fan regulator etc covered with new 3 mm thick laminated bakelite sheet top cover including continuous earth wire of size 1.5 sqmm unsheated stranded copper conductor with green PVC insulation connected to common earth dolly complete all as specified and directed by Engr-in-Chaarge for One light point/fan point controlled by one single pole one way switch.
All as per BOQ Srl Item No. 21.00 here-in-before but for One socket outlet on the same board controlled by one single pole 5 Amp switch complete all as specified and as directed by Engr-in-Charge.
All as per BOQ Srl Item No. 21.00 here-in-before but for One 5 amps socket outlet independent controlled by one single pole 5 Amp switch complete all as specified and as directed by Engr-in-Charge.
All as per BOQ Srl item No - 21.00 above but for One 15 Amps socket outlet controlled by one 15 Amps suitable wiring with 4.00 Sqmm PVC insulated, unsheathed FRLS cable of multistranded copper conductor with continuous earth wire of size 2.5 Sqmm PVC insulated FRLS, unsheathed,multistranded copper conductor cable complete all as specified and as directed by Engr-in-Charge.
S & F Switch piano flush type 5 amps, one way duly ISI marked complete all as specified and as directed by Engr-in-Charge.
S & F Switch socket combinationof 5 and 15 A flush type , one way ISI marked complete all as specified and as directed by Engr-in-Charge.
S & F Socket outlet 5 pin, 5 Amps, piano flush type duly ISI marked complete all as specified and as directed by Engr-in-Charge.
S & F Ceiling rose surface type, PVC/polycarbonate ,isolated, bakelite 65 x 50mm, 3 terminals ISI marked complete all as specified and as directed by Engr-in-Charge.
S & F Lamp holder insulated body threaded dome pattern ,suitable for bracket / batten fitting complete all as specified and as directed by Engr-in-Charge.
S&F T Bulb Curve , 12 Watt LED Base B22 Cool day Light complete all as specified and as directed by Engr-in-Charge.
S&F LED tube light fitting 1 X 20 W decorative ultra slim linear LED lighting fixture with extruded polycarbonate,environmental friendly, energy efficient 230V, complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed by Engr-in-Charge.
Supply & Fix sheet metal enclouser DB's 12 way double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series, 240 volts 200 Amps rated enameled bus bar 8 way dust and vermin proof ssuitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified and as directed by Engr-in-Charge.
S&F MCB Triple pole neutral(TPN) 240 volts, 63 Amps, 10 KA complete all as specified and as directed by Engr-in-Charge.
S&F MCB single pole neutral(SPN) 240 volts, 20 to 60 Amps, 10 KA complete all as specified.
S&F MCB single pole(SP) 240 volts, 05 to 30 Amps, 10 KA complete all as specified and as directed by Engr-in-Charge.
M & L for Sub main wiring with two single core 06 sqmm PVC insulated and unsheathed FRLS cable multistranded copper conductor with earth wire 4.00 sqmm PVC insulated and unsheathed FRLS multistranded copper conductor including PVC conduit pipe 25 Sq mm dia complete all as specified and as directed by Engr-in-Charge. Note:-Two single core 6 sqmm cable and one single core 4 sqmm cable for earth wire and including conduit pipe 25 mm dia shall measured as one length).
M&L for Exhaust fan 250mm sweep, 1400 RPM, 230 volts (single phase), electrically operated 50 Hz, heavy duty metal body complete and fixed including provisioning of three core flexible copper cord of size 23/0.0076 of required length from ceiling rose or connector to Exhaust fan for connection complete all as specified and as directed by Engr-in-Charge.
S&F Sheet Metal Enclosure with socket plug top & MCBs with a two pin and earth plug and socket of 20 Amp complete with one single pole MCB complete all as specified and as directed by Engr-in-Charge.
Excavation in trenches n.exc. 1.5 mtr wide and n.exc 1.5 mtr deep for foundations of poles/stays/cable etc not exc 10 Sqm area on plan and getting out in Hard/Dense soil complete all as specifed and as directed by Engineer-in-Charge.
Returning filling in including spreading levelling, watering and well ramming in layer each not exc. 25 cm thick in hard/dense soil complete all as specified and directed by Enginer-in-Charge.
Removing surplus soil to a distance not exc. 50 mtr and depositing where directed at a level n.exc. 1.5 mtr above the starting point complete all as specified and directed by Engr-in-Charge.
M&L for PCC cable cover Class LV, Type I, flat, size 250 mm x 150mm x 40mm laid Flat in trenches over the cable with length 250mm perpendicular to the direction of cable, adjacent/ abutting each other complete all as specified and directed. Note:-Excavation and earth work to be measured and paid for separately
Sand cushioning to protection of underground cables, laid 8.00 cm before laying and 15.00 cm after laying of cable, and punned to form an overall layer of 18.00 cm thick, complete all as specified and directed by Engineer-In-Charge. Note: Punned thickness of 18cm shall be measured for payment purpose only.
Supply and laying or fixing or passing through pipe XLPE armoured cable , 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 25 sq. mm 4 core stranded conducter nominal cross section in service connections complete all as specified and as directed by Engr-in-Charge.
M&L for Earthing complete with copper plate elecrode of size 60 cm x 60cm x 3.5 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead copper wire of 4mm dia (8 SWG) by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of Copper earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC ( 1:3:6 ) type C-2using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate and MS angle iron 50 x 50 x 6 mm frame including two coats of painting over a red oxide to spoxsed steel surfaces. excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009). Note : (i) Excavation work should be done by manpower only. (ii) Earth test should be done by contractor and if required result is not found entire earthing should by contractor again with no extra cost to the Government.
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .