GE (N) P/TOKEN- 32 OF 2021-2022WELCOME MAINTENANCE TO INTERNAL ELECTRIFICATION OF OFFR MD ACCN, INCLUDING REPAIR / REPLACEMENT OF SUB MAIN WIRING, DB BOXES AND ALLIED WORKS IN THE GHORPADI AREA OF AGE E/M UNDER GE (N) PUNE

Amount

Taking down carefully aluminium point wiring (light, fan, socket or power), complete (fittings such as switches, ceiling rose, pendent, regulators, light fittings etc.) and making good disturbed surfaces of wall, floor etc. complete all as directed.

Taking down the unserviceable submain wiring of any type/ description as existing at site including making good the disturbed surfaces to match with the existing finishes complete all as directed.

Taking down the existing unserviceable main switch/ cut out/ DBs of any type/ capacity/ description as existing at site including MCBs any type/ capacity and making good the disturbed surfaces of wall/ ceiling to match with the existing finishes complete all as directed.

Material and labour for point wiring using approved colour coding as per IS, with multistranded FRLS copper conductor 1.5 Sq. mm (nominal area), two single core PVC insulated and unsheathed multistranded cable 1100 volts grade ISI-694 marked through and including heavy duty ISI marked, rigid PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ ceiling etc, with GI terminal sunken boxes 1.2mm thick 60mm deep of suitable size as per site requirement, covered with modular white cover plate with frame suitable for housing modular switches, sockets, regulators etc. including PVC insulated multistranded FRLS copper conductor 1.5 Sqmm (nominal area) single core cable as earth continuity conductor and connecting to the common earth dolly for one light point controlled by one, one way switch 5 Amps complete all as specified and as directed.

All as per serial item No.4 here-in-before but point wiring for one ceiling fan/ exhaust fan point controlled by one, one way switch 5 Amps and regulator.

All as per serial item No.4 here-in-before but point wiring for one 3 pin 5 Amps socket outlet controlled by one switch on independent board.

All as per serial item No.4 here-in-before but point wiring for one bell point controlled by one bell switch 5 Amps.

All as per serial item No.4 here-in-before but point wiring for one 3 pin 5 Amprs socket outlet controlled by one switch on same board.

All as per serial item No.4 here-in-before but with FRLS copper conductor 2.5 Sqmm (nominal area), single core, PVC insulated and unsheathed multistranded cable 1100 Volt grade ISI-694 marked including PVC insulated multistranded FRLS copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor for 5/ 15 Amps socket outlet on independent board.

Material and labour for point wiring using approved colour coding as per IS, with multistranded FRLS copper conductor 1.5 Sq. mm (nominal area), two single core PVC insulated and unsheathed multistranded cable 1100 volts grade ISI-694 marked through and including heavy duty ISI marked, PVC casing and capping including all accessories, GI terminal boxes 1.2mm thick 60mm deep of suitable size sunken/ surface as per site requirement, covered with modular white cover plate with frame suitable for housing modular switches, sockets, regulators etc. including PVC insulated multistranded FRLS copper conductor 1.5 Sqmm (nominal area) single core cable as earth continuity conductor and connecting to the common earth dolly for one light point controlled by one, one way switch 5 Amps complete all as specified and as directed.

All as per serial item No.10 here-in-before but point wiring for one ceiling fan/ exhaust fan point controlled by one, one way switch 5 Amps and regulator.

All as per serial item No.10 here-in-before but point wiring for one 3 pin 5 Amps socket outlet controlled by one switch on independent board.

All as per serial item No.10 here-in-before but point wiring for one bell point controlled by one bell switch 5 Amps.

All as per serial item No.10 here-in-before but point wiring for one 3 pin 5 Amprs socket outlet controlled by one switch on same board.

All as per serial item No.10 here-in-before but with FRLS copper conductor 2.5 Sqmm (nominal area), single core, PVC insulated and unsheathed multistranded cable 1100 Volt grade ISI-694 marked including PVC insulated multistranded FRLS copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor for 5/ 15 Amps socket outlet on independent board.

Material and labour for point wiring using approved colour coding as per IS, with multistranded FRLS copper conductor 1.5 Sq. mm (nominal area), two single core PVC insulated and unsheathed multistranded cable 1100 volts grade ISI-694 marked through and including heavy duty ISI marked, PVC casing and capping including all accessories, MS sunken boxes 1.6mm thick 60mm deep of suitable size as per site requirement, covered with 3mm thick hylem sheet, ISI marked for switches, sockets, regulators etc. including PVC insulated multistranded FRLS copper conductor 1.5 Sqmm (nominal area) single core cable as earth continuity conductor and connecting to the common earth dolly for one light point controlled by one, one way switch 5 Amps complete all as specified and as directed.

All as per serial item No.16 here-in-before but point wiring for one ceiling fan/ exhaust fan point controlled by one, one way switch 5 Amps and regulator.

All as per serial item No.16 here-in-before but point wiring for one 3 pin 5 Amps socket outlet controlled by one switch on independent board.

All as per serial item No.16 here-in-before but point wiring for one 3 pin 5 Amprs socket outlet controlled by one switch on same board.

All as per serial item No.16 here-in-before but point wiring for one bell point controlled by one bell switch 5 Amps.

All as per serial item No.16 here-in-before but with FRLS copper conductor 2.5 Sqmm (nominal area), single core, PVC insulated and unsheathed multistranded cable 1100 Volt grade ISI-694 marked including PVC insulated multistranded FRLS copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor for 3 pin 15 Amps socket outlet on independent board.

Supply and fix for modular switch flush type, single pole, one way 5/ 6 Amps, 1 module complete all as specified and as directed.

Supply and fix for modular switch piano flush type, single pole, one way, 16/ 20Amprs, 1 module complete all as specified and as directed.

Supply and fix for modular socket outlet multi purpose having provision for 2 pin 5/ 6 Amps and 3 pin 5/ 6 Amps, combined 2 module complete all as specified and as directed.

Supply and fix for modular switch socket outlet multipurpose, 3 pin 5/ 6 Amps and 3 pin 16/ 20Amps, 2 module complete all as specified and as directed.

Supply and fix for modular step type fan regulator 120 watt 1 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed.

Supply and fix for modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed.

Supply and fix for modular type bell push one way 6 Amps 1 module complete all as specified and as directed.

Suply and fix for bell electric ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and as directed

Supply and fix for lamp holder, PVC body of brass suitable for batten fitting complete all as specified and as directed.

Supply and fix for ceiling rose, surface bakelite 230 volt, 50 Hz suitable ISI marked for batten fitting complete all as specified and as directed.

Supply and fix for switch piano flush type, single pole, one way, 6 Amp complete all as specified and as directed.

Supply and fix for switch piano flush type, single pole, one way, 15 Amp complete all as specified and as directed.

Supply and fix for socket outlet multipurpose having provision for 3 pin, 6 Amp and 2 pin, 6 Amp, flush type complete all as specified and as directed.

Supply and fix for socket outlet multipurpose having provision for 3 pin, 15 Amp and 3 pin, 5 Amp, flush type complete all as specified and as directed.

Supply and fix for switch socket combination, 2 in 1, 3 pin 5 Amps and 3 pin 15Amp flush type universal complete all as specified and as directed.

Supply and fix for socket outlet multipurpose having provision for switch socket combination, 2 in 1, 3 pin 5 Amps and 3 pin 15Amp flush type universal complete all as specified and as directed.

Supply and fix for bell push 6 Amp 230 volt 50 HZ AC supply complete all as specified and as directed

Supply and fix for ceiling fan regulator socketed, step type, flush type heavy duty suitable to work on 120 watts, 230 volts AC supply complete all as specified and as directed.

Material and labour for sub main wiring with approved colour coding as per IS with two runs of single core PVC insulated cable with multistranded FRLS copper conductor of size 4.0Sq. mm nominal area and drawing through and including non metallic rigid PVC casing caping of white/ ivory colour and its accessories including one run of PVC insulated 4.0Sqmm (nominal area) multistranded FRLS copper conductor as earth wire and connected from DB to DB/ main board complete all as specified and as directed. (Note- Two runs of 4.0 Sqmm main cable, one run of 4.0Sqmm earth conductor and one run of PVC casing caping will be measured as one unit)

Material and labour for sub main wiring with approved colour coding as per IS with four runs of single core PVC insulated cable with multistranded FRLS copper conductor of size 6.0Sq. mm nominal area and drawing through and including non metallic rigid PVC casing caping of white/ ivory colour and its accessories including one run of PVC insulated 6.0Sqmm (nominal area) multistranded FRLS copper conductor as earth wire and connected from DB to DB/ main board complete all as specified and as directed. (Note- Four runs of 6.0Sqmm main cable, one run of 6.0Sqmm earth conductor and one run of PVC casing caping will be measured as one unit)

Material and labour for sub main wiring with approved colour coding as per IS with four runs of single core PVC insulated cable with multistranded FRLS copper conductor of size 10.0Sq. mm nominal area and drawing through and including heavy duty non metallic rigid PVC conduit of white/ ivory colour and conduit accessories, ISI marked including two runs of PVC insulated 10.0Sqmm (nominal area) multistranded FRLS copper conductor as earth wire and connected from DB to DB/ main board complete all as specified and as directed. (Note- Four runs of 10.0Sqmm main cable, one run of 10.0Sqmm earth conductor and one run of PVC conduit will be measured as one unit)

S & F for MCB DB VTPN 4 way with provision of space for FP MCB/ Isolator/ RCCB etc as incommer and SP/TP MCBs as out going double door IP 43 complete prewired including Bus Bar etc suitable for operation on 415 volt 50 Hz AC supply including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

Supply and fix for sheet metal enclosure MCB DB TPN 4 way with 200 Amps rated bus bar 415 volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

Supply and fix for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

S & F for sheet metal enclosure MCB DB SPN 6 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

S & F for sheet metal enclosure MCB DB SPN 4 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

Supply and fix for MCCB TPN 415 volts 25 KA suitable for fixing on DB of capacity 63 to 100 Amps with extended terminals complete all as specified and as directed.

Supply and fix for MCB TPN rated capacity 63 A, 415V breaking capacity 10 KA, 'C' series complete all as specified and as directed.

Supply and fix for MCB TPN rated capacity 32 Amps, 415Volts breaking capacity 10 KA 'C' series complete all as specified and as directed.

Supply and fix for MCB SPN rated capacity 5 to 32 A, 240 V breaking capacity 10 KA 'C' series complete all as specified and as directed.

Supply and fix for MCB SP rated capacity 5 to 32 A, 240 V breaking capacity 10 KA 'C' series complete all as specified and as directed.

Supply and fix for sheet metal enclosures single pole and neutral enclosure with a three pin and earth plug and socket complete with one MCB SP 20/ 32Amps including removal of old unserviceable one complete all as specified and as directed.

S & F for wall/ceiling mounted LED batten tube 20 watts light fitting, 230 volts with out put of 2000 lumens with extruded aluminium housing with decorative end caps and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED tube 4' x 20 watts complete all as specified and as directed. Make :- JAQUAR Cat part No LGLZ01X020XN or its equvalent in Philips, Wipro, Havells, Bajaj.

S & F for wall/ceiling mounted LED batten tube 10 watts, light fitting, with out put of 2000 lumens, 230 volts with extruded aluminium housing with decorative end caps and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED tube 2' x 10 watts complete all as specified and as directed. Make :- JAQUAR Cat part No LGLZ01X010XN or its equvalent in Philips, Wipro, Havells, Bajaj.

S & F for LED down light recess-mounted designer panel with aluminium die cast housing luminare, round type 18 watts with efficiency of 100 lumens per watt, Series of downlighters with low depth round & larger dia, powder coated white finish with drop down PC diffuser to deliver low glare illumination with optimized heat sink for efficient heat dissipation and separate replaceable electronic driver suitable for office spaces sleek design white finish operating voltage 150 V-270 V AC, 50 Hz all as specified. Make- JAQUAR Cat Part No LNRO01R018XN or Bajaj, Philips, Wipro, Havells.

Supply and fix for decorative wall mounted luminaire made out of polycarbonate with unbreakable globe suitable for LED bulb and provision of LED bulb 10/ 11 watts with lumens out put not less than 1100 lumens all as per Cat No.LHDL06160099 of make Havells or equivalent of make Bajaj, Philips as approved complete all as specified and as directed.

S & F Energy saving new generation 10 watts LED bulk head fitting IP 65 comprising of pressure die cast aluminium housing with acrylic diffuser (IP65 protection) luminaire pre wired and necessary mounting arrangements , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb complete all as specified and as directed. Make :- JAQUAR Cat No LBLK02X010XW or its equvalent in Philips, Wipro, Havells, Bajaj

S & F for Energy saving new generation environmental friendly long life versatile aluminium pressure die cast housing, polycarbonate cover (IP 66 rating) for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 0.6 to 0.9 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. Make :- JAQUAR Cat part No LTRUMP0025XW or its equvalent in Philips, Wipro, Havells, Bajaj

S & F for recess mounted 2' x 2' square LED panel 36 watts, white powder-coated CRCA housing with full mounted acrylic diffuser (operating voltage 140 volts - 270 volts, AC, 50 Hz complete all as specified and as directed. Make- JAQUAR Ultima Ultra Cat Part No LULTU1S036XC or its equivalent in Wipro/ Philips/Bajaj.

S & F for LED post top lantern 40 watt light fitting made of cast aluminium spigot housing with decarative opal acrylic diffuser with IP 65 protection complete with all accessories fixed on GI pipe 50 mm dia including removal of old unserviceable one complete all as specified and directed. Make Bajaj Cat part No BGCL 40 W LED or its equavalent in Philips, Wipro.

Supply and fix for plastic body exhaust fan, AC single phase, 240 volts of size 150 mm sweep with louvers all as per Cat No. Maxio 6" Ivory new of Make Bajaj or equivalent of Make Crompton Greaves/ Havells with necessary connection and replacement of flexible copper cable from ceiling rose including taking down of old unserviceable one and depositing in the store yard of AGE E/M (N) Pune complete all as specified and as directed

Supply and fix for plastic body exhaust fan, AC single phase, 240 volts of size 200 mm sweep with louvers all as per Cat No. Maxma DX 8" of Make Bajaj or equivalent of Make Crompton Greaves/ Havells with necessary connection and replacement of flexible copper cable from ceiling rose including taking down of old unserviceable one and depositing in the store yard of AGE E/M (N) Pune complete all as specified and as directed.

Supply and fix for plastic body exhaust fan, AC single phase, 240 volts of size 250 mm sweep with louvers all as per Cat No. Maxma DX 10" of Make Bajaj or equivalent of Make Crompton Greaves/ Havells with necessary connection and replacement of flexible copper cable from ceiling rose including taking down of old unserviceable one and depositing in the store yard of AGE E/M (N) Pune complete all as specified and as directed.

Supply and fix for plastic body exhaust fan, AC single phase, 240 volts of size 300 mm sweep with louvers all as per Cat No. Maxma DX 1 300mm of Make Bajaj or equivalent of Make Crompton Greaves/ Havells with necessary connection and replacement of flexible copper cable from ceiling rose including taking down of old unserviceable one and depositing in the store yard of AGE E/M (N) Pune complete all as specified and as directed.

S & F for metal flush box made of GI sheet 1.2 mm thick, 60 mm deep with earh terminal including necessary cutting in wall and POP work as required for matching existing slot in wall of size 1 or 2 module including removal of old unserviceable one complete all as specified and as directed.

Supply and fix for metal flush box made of GI sheet with earth terminal including necessary cutting in wall and POP work as required for matching existing slot in wall of size 4 module including removal of old unserviceable one complete all as specified and as directed.

Supply and fix for metal flush box made of GI sheet with earth terminal including necessary cutting in wall and POP work as required for matching existing slot in wall of size 6 module including removal of old unserviceable one complete all as specified and as directed.

Supply and fix for metal flush box made of GI sheet with earth terminal including necessary cutting in wall and POP work as required for matching existing slot in wall of size 8 module including removal of old unserviceable one complete all as specified and as directed.

Supply and fix for metal flush box made of GI sheet with earth terminal including necessary cutting in wall and POP work as required for matching existing slot in wall of size 12 module including removal of old unserviceable one complete all as specified and as directed.

S & F for PVC surface modular box with modular plates inner and outer with earh terminal including necessary fixing arrangements of size 1 or 2 module including removal of old unserviceable one complete all as specified and as directed.

S & F for PVC surface modular box with modular plates inner and outer with earh terminal including necessary fixing arrangements of size 4 module including removal of old unserviceable one complete all as specified and as directed.

S & F for PVC surface modular box with modular plates inner and outer with earh terminal including necessary fixing arrangements of size 6 module including removal of old unserviceable one complete all as specified and as directed.

S & F for PVC surface modular box with modular plates inner and outer with earh terminal including necessary fixing arrangements of size 8 module including removal of old unserviceable one complete all as specified and as directed.

S & F for PVC surface modular box with modular plates inner and outer with earh terminal including necessary fixing arrangements of size 12 module including removal of old unserviceable one complete all as specified and as directed.

Supply and fix for modular plates white colour with frame of 1 module including removal of old unserviceable one complete all as specified and as directed.

Supply and fix for modular plates white colour with frame of 2 module including removal of old unserviceable one complete all as specified and as directed.

Supply and fix for modular plates white colour with frame of 3 module including removal of old unserviceable one complete all as specified and as directed.

Supply and fix for modular plates white colour with frame of 4 module including removal of old unserviceable one complete all as specified and as directed.

Supply and fix for modular plates white colour with frame of 6 module including removal of old unserviceable one complete all as specified and as directed.

Supply and fix for modular plates white colour with frame of 8 module including removal of old unserviceable one complete all as specified and as directed.

Supply and fix for modular plates white colour with frame of 12 module including removal of old unserviceable one complete all as specified and as directed.

Supply and fix for modular plates white colour with frame of 16 module including removal of old unserviceable one complete all as specified and as directed.

Supply and fix for modular plates white colour with frame of 18 module including removal of old unserviceable one complete all as specified and as directed.

S & F for LED spot light suitable for operation on 230 volt 50 Hz AC supply, Recess-mounted, die cast aluminium housing, COB-based, round fixed LED downlight with 60⁰ beam angle 10 watts including removal of old unserviceable one complete all as specified and as directed. Make JAQUAR Cat Part No LETS01R010XN or equivalent in Bajaj/Havells

Supply and fix for casing and capping heavy duty, size 40mm with all fittings including removal of old unserviceable one complete all as specified and as directed

Supply and fix for casing and capping heavy duty, size 25mm with all fittings including removal of old unserviceable one complete all as specified and as directed

Supply and fix for casing and capping heavy duty, size 20mm with all fittings including removal of old unserviceable one complete all as specified and as directed

Material and labour for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less then 2.25 meter deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth lead wire 4.0mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel and connected to main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 54 cm x 54 cm x 5 cm with one handle for lifting made out of 8mm dia MS bar, funnel, wire mesh, 20 mm bore galvanized steel tubing (medium grade) for watering, filling charcoal or coke and salt in alternate layers, 15mm bore galvanized steel tubing light grade for protection of earth lead connection, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown on electrical plate No.3 of SSR Part-I, including taking down of existing earthing. (Note: GI earth wire and protection pipe upto 7.5metres shall be deemed to be included in quoted rate)

Attending the complaints of non functional ceilling/exhaust/wall fan of any sweep and testing and repairing the ceilling/exhaust fan without taking down by replacing of fan condencer, fan regulator and connection wire etc. and making fan serviceable including checking the strengh of Clamp, down rod and provision of check nuts and split pin all as directed. (Note :- Item such as fan condenser, fan regulator, 1.5 sqmm, 3 core copper flexible cable shall be measured and paid seperataly as 'Supply Only'.)

Supply only fan condencer, 2.5 Mfd, 240 volts for ceiling fan including PVC clamp

Supply only fan condencer, 4 Mfd, 240 volts for ceiling/Exhaust fan including PVC clamp

Supply only exhaust fan capacitor 0.85/1.0 Mfd, 230 volts including PVC clamps

Supply only wall fan capacitor 1.5 Mfd, 230 volts including PVC clamps

Supply only copper conductor FRLS cable, 1.5 Sqmm, 3 core, 1100 Volt grade

Taking down ceiling fan of any size/ sweep after disconnecting the wire from ceiling rose for repair/ replacing the unsv bearing, gun metal bush, rubber reel with clamp and nut-bolts, washers, lock pin or taken to work - shop for rewinding and refixing the fan after rewinding, cleaning dust, oiling, greasing, servicing, etc as per existing & connecting flexible 3 core cable from ceiling rose to connector of fan, complete all as specified and directed by Engineer-in-charge (Note- Ball bearing, gun metal bush, rubber reel with clamp, nut-bolts, blade assy, outer body, canopy, rotor, stator etc shall be measured and paid separetaly as 'Supply Only' and rewinding item paid seperately under relevant item)

Supply only for brass GM bush suitable for fan any size complete all as specified and as directed

Supply only fan clamp with rubber reel insulator/ rubber bush, nuts, check nuts with bolts, washer and lock pin all as specified and as directed.

Supply only bearing No 6201/6202/6203 suitable for ceiling fans complete all as spcified and directed by Engineer-in-charge

Supply only Armature (Rotor) unit with shaft suitable for ceiling fan 1200 mm sweep of make suitable to existing as per sample. The rotor shall be made up of a wire coil enveloped around an iron core. The magnetic component of the rotor shall be made from steel laminations to aid stamping conductor slots to specific shapes and sizes. This rotor should operate at a speed 1500 rpm (revolutions per minute) and 40% of its rated torque without excitation complete all as spcified & directed by Engineer-in-charge .

Supply only field winding (Stator) of ceiling fan 1200 mm sweep complete of make suitable to existing as per sample with starting and running coil and connectors. The core of the stator is made of steel frame enclosing a hollow cylindrical core bounded up of laminations of silicon steel and copper wounded. The stator should be electromagnet and suitable to energize the field windings complete all as specified & directed by Engineer-in-charge .

Supply only Outer body of ceiling fan of make suitable to existing (as per sample) complete top and bottom with nut & bolt, made of aluminium alloy, heavy duty suitable to accomodate thev stator and rotor under item 7 and 8 above for ceiling fan 1200 mm sweep including cleaning all dust etc all as spcified & directed by Engineer-in-charge .

Supply only ceiling Fan canopy PVC white in colour suitable for ceiling Fan 1200/1400 mm sweep of make suitable to existing as per sample complete top and bottom all as specified and as directed.

Material and labour for rewinding of ceiling fan of any size with supper enameled copper wire of existing gauge including varnishing and drying complete reassembling and testing of size 1200 mm sweep complete all as specified and as directed.

Material and labour for rewinding of ceiling fan of any size with supper enameled copper wire of existing gauge including varnishing and drying complete reassembling and testing of size 1400 mm sweep complete all as specified and as directed.

Supply and fix for ceiling fan down rods 1.0 metre long of 15mm bore GI pipe light grade including welding and fixing with clamps and nut bolts etc. at any height complete all as specified and as directed.

Supply and fix for ceiling fan down rods 1.5 metre long of 15mm bore GI pipe light grade including welding and fixing with clamps and nut bolts etc at any height complete all as specified and as directed.

Supply and fix for ceiling fan down rods 2.0 metre long of 15mm bore GI pipe light grade including welding and fixing with clamps and nut bolts etc at any height complete all as specified and as directed.

Taking down ceiling fan of 1200mm sweep after disconnecting the wire from existing ceiling rose for painting with one coat white colour synthetic enamel paint by gun spray and filling cavaties with metalic fillar, after cleaning all dust etc including writing MES/ Sl No of fan all as specified and directed by Engineer-in-charge

Taking down ceiling fan of 1400mm after disconnecting the wire from existing ceiling rose for painting with one coat white colour synthetic enamel paint by gun spray and filling cavaties with metalic fillar, after cleaning all dust etc including writing MES/ Sl No of fan all as specified and directed by Engineer-in-charge

Taking down Exhaust fan of any make 300mm sweep from any location such as Kitchen/ wash room after disconnecting the electric wire from existing ceiling rose for repair/ replacing the under mentioned unsv spares and refixing the same after cleaning all dust, oil etc including epoxy painting one coat with existing colour and matching fan parts complete all as spcified and directed by Engineer-in-charge (Note :- Spares shall be measured and paid seperataly as 'Supply Only' and rewinding item paid seperately under relevant items)

Supply only Exhaust fan metal body assembly heavy duty with lowers and clamps 4/3 Nos suitable for 300mm sweep of make suitable to existing suitable to accommodate motor assembly complete all as specified and as directed.

Supply only Motor assembly complete with Armature (Rotor) unit and Field winding (Stator) unit with shaft heavy duty suitable for 300mm sweep exhaust fan metal body of make suitable to existing as per sample complete all as specified and as directed.

Supply only blade assembly with three blades heavy duty of metal suitable for 300mm sweep exhaust fan metal body of make suitable to existing as per sample including key bolt/ check bolt complete all as specified and as directed.

Material and labour for rewinding of exhaust fan of any size with supper enameled copper wire of existing gauge including varnishing and drying complete reassembling and testing of size 300 mm sweep complete all as specified and as directed.

Taking down Exhaust fan of any make 250mm sweep from any location such as Kitchen/ wash room after disconnecting the electric wire from existing ceiling rose for repair/ replacing the under mentioned unsv spares and refixing the same after cleaning all dust, oil etc including epoxy painting one coat with existing colour and matching fan parts complete all as spcified and directed by Engineer-in-charge (Note :- Spares shall be measured and paid seperataly as 'Supply Only' and rewinding item paid seperately under relevant items)

Supply only Exhaust fan metal body assembly heavy duty with lowers and clamps 4/3 Nos suitable for 250mm sweep of make suitable to existing suitable to accommodate motor assembly complete all as specified and as directed.

Supply only Motor assembly complete with Armature (Rotor) unit and Field winding (Stator) unit with shaft heavy duty suitable for 250mm sweep exhaust fan metal body of make suitable to existing as per sample complete all as specified and as directed.

Supply only blade assembly with three blades heavy duty of metal suitable for 250mm sweep exhaust fan metal body of make suitable to existing as per sample including key bolt/ check bolt complete all as specified and as directed.

Material and labour for rewinding of exhaust fan of any size with supper enameled copper wire of existing gauge including varnishing and drying complete reassembling and testing of size 250 mm sweep complete all as specified and as directed.

Taking down Exhaust fan of any make 450mm sweep from any location such as Kitchen/ wash room after disconnecting the electric wire from existing ceiling rose for repair/ replacing the under mentioned unsv spares and refixing the same after cleaning all dust, oil etc including epoxy painting one coat with existing colour and matching fan parts complete all as spcified and directed by Engineer-in-charge (Note :- Spares shall be measured and paid seperataly as 'Supply Only' and rewinding item paid seperately under relevant items)

Supply only Exhaust fan metal body assembly heavy duty with lowers and clamps 4/3 Nos suitable for 450mm sweep of make suitable to existing suitable to accommodate motor assembly complete all as specified and as directed.

Supply only Motor assembly complete with Armature (Rotor) unit and Field winding (Stator) unit with shaft heavy duty suitable for 450mm sweep exhaust fan metal body of make suitable to existing as per sample complete all as specified and as directed.

Supply only blade assembly with three blades heavy duty of metal suitable for 450mm sweep exhaust fan metal body of make suitable to existing as per sample including key bolt/ check bolt complete all as specified and as directed.

Material and labour for rewinding of exhaust fan of any size with supper enameled copper wire of existing gauge including varnishing and drying complete reassembling and testing of size 450 mm sweep complete all as specified and as directed.

Attending the complaints of non functional and Preventive maintenance of storage type electric water heater (Geyser) of capacity 25/50 ltrs comprising of the following tasks at different locations of any make, complete all as specified and as directed.:-(a) Inspection of geyser after opening bottom cover plate.(b) Examine water tightness of storage tank.(c) Carry out operation of all stop cocks, pressure reducing valves, etc. to ensure free movement of the working parts.(d) Replace washers and glands of defective taps to ensure water tightness smooth functioning.(e) Inspect vent pipes and remove blockage obstruction if any.(f) Check and correct earth continuity of electrical items.(g) Check and correct temperature setting of thermostats and test its functioning.(h) Checking and adjustments of pressure reducing valves.(J) Checking of dead weight type high pressure release valve (PRV) by removing dead weight protection cleaning the seat and ensuring that the waste hole is not blocked / chocked. (k) Testing of Geysers after repairs/maintenance in all respect for proper functioning.

Taking down storage geyser of 25/50 litres capacity after disconnecting electrical connection from existing socket, removing the bolts and nuts from wall and disconnected inlet and outlet water connection for repair/ replacing the unsv items and assemble the same after making serviceable, cleaning dust including connecting flexible 3 core cable as required, with proper filling of glass wool as heat resistance material, suitable quantity etc and refixing the geyser at it's original location complete all as directed spcified by Engineer-in-charge (Note- Spare parts of geyser shall be measured and paid separetaly as 'Supply Only' under relevant item)

Supply only Heating element long length suitable for existing cylindrical type geysers all as per sample including rubber washers (ISI marked) of any type suitablt to existing geuser of capacity 1500 watts complete all as directed .

Supply only Heating element long length suitable for existing cylindrical type geysers all as per sample including rubber washers (ISI marked) of any type suitablt to existing geuser of capacity 2000 watts complete all as directed .

Supply only Thermostat ISI marked analog type & adjustable type suitable for the Geysers 25 ltrs/ 50 ltrs capacity, 20 Amps, 240 Volts AC, 210mm/300mm long or nearest size as per sample.

Supply only 600mm long PVC connections pipe with brass hexagonal adapters both side suitable for 15mm bore pipe for cold water all as specified

Supply only 600mm long PVC connections pipe with brass hexagonal adapters both side suitable for 15mm bore pipe for Hot water all as specified

Supply only Non-return valve 15mm dia of brass ISI marked as per requirement.

Supply only Non-return valve 20mm dia of brass ISI marked as per requirement.

Supply only for indicators of Geysers of any capacity/ type as per requirement.

Supply only Cable PVC insulated 3 core 2.5 Sqmm with stranded copper conductor 1100 Volts grade from socket/switch to geyser as per requirement.

Supply only 3 pin plug top, 16 amp capacity, 240 VAC, heavy duty, ISI marked

Supply only for safety valve plug made out brass metal with fusible lead, inner thread type suitable for geyser of any type/ capacity.

Supply only metal outer body of stoage water heater 25 Ltr capacity any type (Vertical/Horizotal) make suitable to existing including reinforced PUF insulation with required dense complete all as specified and as required to hold the temperature of hot water all as directed.

Supply only High pressure resistance inner body and Special enamel-coated copper inner tank complete for storage water heater 25 Ltr capacity any type (vertical/ horizontal) suitable for existing (make) water heater including PUF insulation all as specified.

Supply only housing assembly of storage water heater 25 ltr capacity suitable for installing heating element and thermostat (verticle and horizantal type) suitable as per existing (make) water heater as specified

Supply only Copper sheathed heating elements short length for latest type geysers provides faster heating and lower energy consumption of 2KW capacity suitable for verticle and horizantal type as per sample as directed

Supply only thermostat digital type for the range 25 to 90 degree celcius, suitable for 25/ 50 ltr storage type water heater all as specified

Supply only metal outer body complete of stoage water heater 50 Ltr capacity any type (Vertical/Horizotal) make suitable to existing including reinforced PUF insulation with required dense as specified and as required to hold the temperature of hot water all as directed.

Supply only High pressure resistance inner body and Special enamel-coated copper inner tank complete for storage water heater 50 Ltr capacity any type (vertical/ horizontal) suitable for existing (make) water heater including PUF insulation all as specified.

Supply only housing assembly of storage water heater 50 ltr capacity suitable for installing heating element and thermostat (verticle and horizantal type) suitable as per existing (make) water heater as specified

M & L for painting the stoage water heater 25 Ltr capacity any type (Vertical/Horizotal) with one coat with white colour synthetic enamel paint by spraying and filling cavaties with filler, after cleaning all dust etc including writing MES/ Sl No. all as specified and directed by Engineer-in-charge.

M & L for painting the stoage water heater 50 Ltr capacity any type (Vertical/Horizotal) with one coat with white colour synthetic enamel paint by spraying and filling cavaties with filler, after cleaning all dust etc including writing MES/ Sl No. all as specified and directed by Engineer-in-charge.

M & L writing letters or figures as "GE NORTH PUNE. MES NO 0000" with thick synthetic enamel paint black of suitable size / dimentions for ceiling fan, exhaust fan, geyser etc. as directed by Engr-in-Charge )

S & F in repair wall mounted LED 2 watts bed side light fitting adjustable neck 230V 50Hz with necessary electrical connections complete all as specified and as directed. Make: Philips Cat No. 8718291765400 or equivalent of makes as per Appx 'A' as directed by GE.

Supply and replace for single core cable PVC insulated and unsheathed multistranded copper conductor of size 1.5 Sqmm from point wiring including removal old existing unserviceable one complete all as specified and directed.

Supply and replace for single core cable PVC insulated and unsheathed multistranded copper conductor of size 2.5 Sqmm from point wiring including removal old existing unserviceable one complete all as specified and directed.

Supply and replace for single core cable PVC insulated and unsheathed multistranded copper conductor of size 4 Sqmm from point wiring including removal old existing unserviceable one complete all as specified and directed.

Supply and replace for single core cable PVC insulated and unsheathed multistranded copper conductor of size 6 Sqmm from sub main wiring including removal old existing unserviceable one complete all as specified and directed.

Note : 1. Rerformance security:- Refer Condition 22 of Special Conditions 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.

ganesh electricals and airconditioners

Suchit constructions

M/S PREETAM KUMAR SHIVAJI SHINDE

Dheer Engineering

PURVA ELECTRICALS AND ENGINEERS