PROVN OF CHAIN LINK FENCING AROUND P-856, PROVN OF INTERNAL WIRING IN TECH AREA, PROVN OF STANDBY ELECTRIC SUPPLY TO SMC AND ATC AND PROVN OF 63 AMP PLUG SOCKET AT AFS STN HASI MARA

Excavating in post holes each n. exc. 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 2 cum watering out rawing and removing surplus soil to a distance n. exc. 50m and making good surface as in soft/loose soil, complete all as specified and directed.

M & L for PCC (1:3:6) type C2 (using 40mm graded crushed stone aggregate) for foundation, filling, mass concrete including necessary form work, complete all as specified and directed.

S&F mild steel angle iron fixed independently without connecting plates etc. as in fencing posts confirming to Fe 290 (Gde E-165), complete all as specified and directed.

S&F flat iron fillets fixed to the fencing posts including all necessary drilling bolting or riveting etc and similar work confirming to Fe 290-0, complete all as specified and directed.

S&F 12mm dia mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with hexagonal or square and washers but length of bolt exc. 10cm long & n. exc. 15cm long, complete all as specified and directed.

Supply only chain link MS galvanisd fencing, any size or type weight n.exc. 3.00 kg per Sqm, complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire, complete all as specified and directed.

M&L for preparation of new steel or iron surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint (1st grade quality) over a coat of red oxide primer, complete all as specified and directed.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m depth for foundation, for shafts, wells cesspits, manholes, pier holes, foundation of pole/stay or cable trenches etc. and n.exc 10 Sqm on plan and getting out in soft/loose soil, complete all as specified and directed.

Returning filling in incl spreading, leveling watering and well ramming in layers not exceeding 25cm in soft/loose soil, complete all as specified and directed.

Removing of excavated materials to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 metre above the starting point in any type of soil, complete all as specified and directed.

M&L for RCC (Nominal mix) (1:1.5:3) type A1 (using 20mm graded crushed stone aggregrate) as in foundation including rafts, footings, bases for columns, complete all as specified and directed

M&L for RCC (Nominal mix) (1:1.5:3) type A1 (using 20mm graded crushed stone aggregrate) as in columns, pillars, piers, posts and struts etc, complete all as specified and directed

M&L for RCC (Nominal mix) (1:1.5:3) type A1 (using 20mm graded crushed stone aggregrate) as in foundation beam, plinth beams and bases for columns, floors, balconies, canopies, deck slab in dhelves and the like, complete all as specified and directed.

Use and waste of form work to sides of pillars, posts, struts, piers, columns and stanchions and similar works, rough finished surfaces of concrete, complete all as specified and directed.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) foundation and plinth beams and similar work, vertical or to batter, rough finished surfaces of concrete flat, complete all as specified and directed.

M&L for brickwork with sub class bricks, old size, straight or curved on plan exc 6m mean radius, built in CM (1:6), complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

All as per item No. 18.00 here-in-before but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, complete all as specified and directed.

M&L for MS framed work as in doors or gates of angle (50 x 50 x 6) or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing, Fe-410W, Gde E-250, complete all as specified and directed.

M & L for complete removal of existing treatment of old painted steel or iron surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coat of synthetic enamel paint (1st grade quality), complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 350 x 250 x7mm / 450 x 300 x7 to 8mm thick each as in skirting or dado on vertical surfaces of wall, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM (1:4), complete all as specified and directed.

M&L for granite (of any type) tiles 18 to 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete, on floors, over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed.

M& L for point wiring with 1.5 Sqmm PVC insulated and unsheathed multistranded copper conductor cable, 1100 volts grade, ISI marked, FRLSH type drawn through and including heavy duty PVC casing/caping (ISI marked) of size not less than 20mm x 12mm with fixing accessories to be fixed on wooden gutties or plastic rawal plag with and including pressed steel terminal boxes 1.6mm thick or required size factory made with top cover 3mm thick plastic laminated sheet for mounting switch, sockets etc including 1.5 Sqmm (nominal area) copper conductor cable (multistrand), FRLSH type, PVC insulated and unsheathed with colour code earth wire connected to common earth dolly for one light point/one fan point controlled by one, one way switch, complete all as specified and directed.

M & L for point wiring complete with PVC insulated unsheathed, 1100 volts grade cable 1.5 Sqmm (nominal area) FRLSH type multi stranded copper conductor, single core drawn in surface tupe PVC conduit, medium grade, (ISI marked), heavy duty of adequate size including its accessories not less than 20mm dia rigid PVC conduit, medium grade, ISI marked including all conduit accessories with and including concealed modular box of suitable size for mounting modular switch, sockets, fan regulator etc including 1.5 Sqmm FRLSH type PVC insulated unsheathed cable multi-stranded copper conductor as continuous earth wire and connected to common earth dolly as required at site & including chases cutting & making good disturbed surface & applying finishes to match existing surface etc. for one light/fan point controlled by one, one way switch single pole, complete all as specified and directed.

All as per item No. 25.00 here-in-before but for one 3 pin 5 Amp switch socket outlet point, controlled by one switch on the same board, complete all as specified and directed.

S&F switch piano, flush type, single pole, one way 6 Amps 230 volts, complete all as specified and directed.

M&L for submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLSH type, cables 1.5 Sqmm drawn in and including medium grade, surface stove enamelled steel conduit (ISI marked) not less than 20mm dia with fixing accessories including 1.5 Sqmm 1100 Volts grade, FRLSH type, PVC insulated unsheathed multistranded flexible copper conductor cable as continuous earth wire and connecting to common earth dolly, complete all as specified and directed. Note:-(i) Three runs of cable and one run steel conduit and its accessories shall be measured as one length of sub main.

S&F ceiling rose of size 65 x 50mm surface bakelite 240 Volts, three terminal, complete all as specified and directed.

Hanging only ceiling fan of any sweep including providing hanger clamp assembly of down rod for hanging of ceiling fan fixed with nuts, bolts, washers and split pin, including MS fan hook with two number heavy duty pin anchor fastener and rubber bush insulator, reel type, suitable for fan hook, complete all as specified and as directed. (Note : Ceiling fan shall be provided by the user.)

S&F MCB distribution board (DB), SPN with sheet metal encloser, double door, IP 43 protection, 240 volts, 4 way, with 200 Amps rated copper busbar (as per OEM) IP 43 protection, neutral link for fixing MCBs/Isolators including taking down old unserviceable MCB DB of any description, completes all as specified and directed.

S&F MCB SPN 40 to 63 Amps, 10 KA, 'C' curve, including connection and testing, complete all as specified and directed.

S&F MCB SPN 6 to 32 Amps, 10 KA, 'C' curve, including connection and testing, complete all as specified and directed.

S&F MCB SP 6 to 32 Amps, 10 KA, 'C' curve, including connection and testing, complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70 Sqmm 3.5 core, complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 185 Sqmm 3.5 core, complete all as specified and directed.

Supply and laying double walled corrugated (DWC) HDPE duct pipe of 50mm dia (outer) conforming to IS, approved colour complete with fittings for cable protection, complete all as specified and directed.

Supply and laying double walled corrugated (DWC) HDPE duct pipe of 90mm dia (outer) conforming to IS, approved colour complete with fittings for cable protection, complete all as specified and directed.

M & L for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in coping/benching etc, including necessary formwork, complete al as specified and directed.

All as per item No. 40.00 here-in-before but for capacity 200 KVA shifting to ATC Air force Stn Hasimara, complete all as specified and directed.

All as per item No. 42.00 here-in-before but for capacity 200 KVA at ATC, complete all as specified and directed.

M&L for earthing complete with GI earth plate electrode 60 × 60cm × 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to existing earth lead GI strip 32 X 6mm by means of bolts, nuts, check nuts and washers of brass or HS steel all as shown in electrical plate No. 3 connected to earthing test point and and necessary excavation and earth work PCC (1:3:6) type C-1 as earth pit with pre-cast RCC (1:2:4) type B-1 cover slab size 400 x 400 x 50mm reinforced with 8mm dia TMT bar, 100mm c/c both ways including one handle made of 12mm dia including providing charcoal or coke and common salt in alternate layer of 15cm compacted thickness all around the earth electrode with funnel and 40mm bore galvanized iron watering pipe (light grade) wire mesh, copper lugs, complete in all respect, including galvanised iron earth strip 32 x 6mm, protected by 40mm bore (medium grade) galvanized iron pipe up to earthing test point as directed, incl disposal of spoil to a distance not exc. 50 mtr and necessary testing on completion, complete all as specified and as directed. Note : Proper earthing pit should be provided with pit cover.

Horizontal boring under the road (with manual method) below 1mtr from the road surface and dia of hole upto 150mm, with out damaging the existing road, getting out and disposal of soil to a distance not exceeding 50m from the site of work, complete all as specified and directed.

Supply, laying and testing 50mm bore GI tubing, light grade, laid in trenches or road crossing, with necessary fittings such as bend, tee, elbow etc for protection of LT UG cable, complete all as specified and directed.

Supply, laying and testing 100mm bore GI tubing, light grade, laid in trenches or road crossing, with necessary fittings such as bend, tee, elbow etc for protection of LT UG cable, complete all as specified and directed.

Supply, laying and testing 15mm bore GI tubing, light grade, laid in trenches, with necessary fittings such as bend, tee, elbow etc for protection of LT UG cable, complete all as specified and directed.

S&F module metal plug socket unit, capacity 63 Amp, 5 pin (3 P + N + E) conforming to IEC 61439-1&3, IS-8804 and IP-67 including fixing arrangement and related hardware etc, complete all as specified and directed.

S&F socket outlet 2 in 1, 2/3 pin 5/6 Amp 230 volts, flush type, complete all as specified and directed.

S&F lamp holder, PVC / Polycarbonate body surface bakelite with back plate suitable for angle/batten fittings for lamp with B22 base, complete all as specified and directed.

S&F LED ADORE 10 W B22 CDL 5 star lamp with B22 base, capacity 1200 lumen, complete all as specified and directed.

S & F wall mounted LED light fitting 18 Watt, 4 feet long, 230V, with extruded aluminium heat sink provided for efficient heat dissipation and intigrated electronic driver, connector block, including LED tube light 18 watt connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed.

Please Enable Macros to View BoQ information