Loading
Loading…
Loading…
Tender Value
₹3.3 Cr
EMD Value
₹3.3 L
Closing Date
16 Apr 2024, 11:00 amClosed
Civil, water proofing, Electrical, Plumbing, Sanitary & painting works etc.
NSL/CEO/AICL/NIT/2024/647
NSL/CEO/AICL/NIT/2024/647
Open Tender-Domestic
Miscellaneous
New Delhi, Delhi
₹11,800
₹3.3 L
16 Apr 2024
1 Apr 2024
16 Apr 2024
16 Apr 2024
24 Apr 2024
S NO DESCRIPTION QTY AMOUNT
1 Renovation of AICL flats (Apartment with terrace) 13.00 ₹ 22,676,881.50
2 Renovation of AICL flats (Apartment without terrace) 7.00 ₹ 9,828,695.10
Digitally signed by AMIT
Renovation of AICL Flats (Middle Apartments-without
terrace) at D6-Vasant Kunj, New Delhi
S NO DESCRIPTION
2 SANITARY/ PLUMBING WORKS 53,560.65 260,487.00
3 ELECTRICAL WORKS 369,813.00 32,680.00
B Total cost (DSR +NDSR) for one unit 1,404,099.30
C G-Total (07units) 9,828,695.10
ABSTRACT OF COST
S. No. ITEM OF CIVIL WORK AMOUNT
1.00 Brick Work Rs. 36425 0
2.00 Marble Work Rs. 18198 0
4.00 Steel Work Rs. 0 0
5.00 Flooring Rs. 175774 0
6.00 Finishing Rs. 237872 0
7.00 Aluminium Rs. 17568 0
8.00 Waterproofing Rs. 6926 0
9.00 Dismantling and Demolish Rs. 67936 0
Amount Rs. 685999 1560
Total Amount Rs. 687559
Total Amount Rs. 687559
SCHEDULE OF QUANTITIES
Item DSR 2023 Amount
Description of Item Quantity Unit Rate
1.00 6.0 BRICK WORK
1.01 6.1 Brick work with common burnt clay F.P.S. (non
modular) bricks of class designation 7.5 in
foundation and plinth in:
6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) 1.00 Cum 7132.25 7132
1.02 6.32 Brick work with clay flyash F.P.S. (non modular)
brick of class designation 7.5 in superstructure
above plinth level up to floor five level in :
6.32.2 Cement mortar 1:6 (1 cement : 6 coarse sand) 2.00 Cum 9095.05 18190
1.03 6.12 Half brick masonry with common burnt clay
F.P.S. (non modular) bricks of class designation
7.5 in foundations and plinth in :
6.12.2 Cement mortar 1:4 (1 cement : 4 coarse sand) 5.00 Sqm 905.05 4525
1.04 6.45 Half brick masonry with non modular fly ash
bricks of class designation 10, conformingio IS
:12894, in super structure above plinth and upto
6.45.2 Cement mortar 1:4 (1 cement :4 coarse sand) 5.00 Sqm 1105.80 5529
1.05 6.15 Extra for providing and placing in position 2 Nos
6mm dia. M.S. bars at every third course of half
brick masonry. 10.00 Sqm 104.80 1048
Total Brick Work : 36425 0
2.00 8.0 MARBLE WORK
2.01 8.2 Providing and fixing 18 mm thick gang saw cut,
mirror polished, premoulded and prepolished,
machine cut for kitchen platforms, vanity
counters, window sills, facias and similar
locations of required size, approved shade,
colour and texture laid over 20 mm thick base
cement mortar 1:4 (1 cement : 4 coarse sand),
joints treated with white cement, mixed with
matching pigment, epoxy touch ups, including
rubbing, curing, edge moulding, facia and
polishing to edges to give high gloss finish etc.
complete at all levels.
8.2.2 Granite Stone Slab of Colour Black, Cherry/Ruby
8.2.2.1 Area of slab upto 0.50 sqm 3.00 Sqm 5413.50 16241
2.02 8.2.2.2 Area of slab over 0.50 sqm 0.00 Sqm 5136.30 0
2.03 8.5 Extra for providing opening of required size &
shape for wash basin/ kitchen sink in kitchen
platform, vanity counter and similar location in
marble/Granite/stone work, including necessary
holes for pillar taps etc. including moulding,
rubbing and polishing of cut edges etc. complete. 2.00 each 978.70 1957
Total Marble Work : 18198 0
3.00 9.0 WOOD WORK
Item DSR 2023 Amount
Description of Item Quantity Unit Rate
3.01 9.21 Providing and fixing ISI marked flush door
shutters conforming to IS : 2202 (Part I) non-
decorative type, core of block board construction
with frame of 1st class hard wood and well
matched commercial 3 ply veneering with vertical
grains or cross bands and face veneers on both
faces of shutters:
9.21.1 35 mm thick including ISI marked Stainless Steel
butt hinges with necessary screws 8.00 Sqm 2392.65 19141
3.02 9.127 Providing & Fixing decorative high pressure
laminated sheet of plain / wood grain in gloss /
matt / suede finish with high density protective
surface layer and reverse side of adhesive
bonding quality conforming to IS : 2046 Type S,
including cost of adhesive of approved quality.
3.03 9.23 Extra for providing lipping with 2nd class teak
wood battens 25 mm minimum depth on all
edges of flush door shutters (over all area of door
shutter to be measured). 8.00 Sqm 462.35 3699
3.04 MR Providing and fixing Stainless steel satin finish
SS 304 grade Tower Bolts SS screws for wooden
doors of approved make and model all complete
as per the directions of Engineer-in-charge
3.05 9.165 Providing and fixing bright /matt finished
Stainless Steel handles of approved quality &
make with necessary screws etc all complete.
3.06 9.113 Providing and fixing bright finished 100 mm
mortice lock with 6 levers without pair of handles
of approved quality for aluminium door, with
necessary screws etc complete as per direction
of Engineer- in-charge. 3.00 Each 850.05 2550
3.07 9.101 Providing and fixing aluminium hanging floor door
stopper ISI marked anodised (anodic coating not
less than grade AC 10 as per IS : 1868)
transparent or dyed to required colour and shade
with necessary screws etc. complete:
9.101.2 Twin rubber stopper 3.00 Each 72.35 217
3.08 9.83 Providing and fixing aluminium die cast body
tubular type universal hydraulic door closer
(having brand logo with ISI, IS : 3564, embossed
on the body, door weight upto 35 kg and door
width upto 700 mm), with necessary accessories
and screws etc. complete. 5.00 Each 1124.85 5624
Item DSR 2023 Amount
Description of Item Quantity Unit Rate
3.09 9.147A Providing and fixing factory made uPVC
glazed/wire mesh windows/ doors comprising of
lead free uPVC multi-chambered frame, sash and
mullion/coupler (where ever required) extruded
profiles having minimum wall thickness of 1.70
mm for Series R1 and R2 profiles and 2.10 mm
for Series R3 and R4 profiles conforming to EN:
12608 in any shape, colour and design duly
reinforced with galvanized mild steel section
made of required shape & size as per CPWD
Specification, uPVC extruded glazing beads,
interlocks and lnline sash adaptor (where ever
required) of appropriate dimension, EPDM
gasket, hardware, SS 304 grade fasteners of
minimum 8 mm dia with countersunk head,
comprising of matching polyamide PA6 grade
sleeve for fixing frame to finished wall as per IS
1367 : Part 1 to 14, plastic packers, plastic caps
and necessary stainless steel screws etc. Profile
of frame, sash & mullion (if required) shall be
mitred cut and fusion welded/mechanically jointed
duly sealed at all corners, including drilling of
holes for fixing hardware and drainage of water
etc. After fixing frame the gap between frame and
adjacent finished wall shall be filled with weather
proof silicon sealant over backer rod of approved
size and quality, all complete as per approved
drawing conforming to CPWD specification &
direction of Engineer-in-Charge. Section of steel
reinforcement and cross sections of uPVC
profiles to be as per design approved by
Engineer-in-Charge.
Wire mesh / Glazing of plain/ toughened/
laminated/ double glass unit with/ without high
performance coatings as per design requirements
and conforming to IS: 3548 & IS: 16231 shall be
paid separately.
Note:- Structural design proof checked
from a Government Engineering Institute, to be
provided by the manufacturer for
(i) Sites with basic wind speed > 45
m/sec as per IS 875 - Part 3
(ii) Sites with structure height more than 20m for
all wind speeds
9.147.E2 Casement window double panels with fixed
mullion with S.S. 304 friction hinges as per size
and weight of sash, multi-point locking system,
zinc alloy (zamak) powder coated handles.
a) 9.147.E2.1 Using R2 series with frame (39 mm & above) x
(39 mm & above) & sash (39 mm & above) x (60
mm & above) & mullion (39 mm & above) x (60
mm & above). (Height upto 1.2 metre). 2.00 Sqm 13078.70 26157
Item DSR 2023 Amount
Description of Item Quantity Unit Rate
b) 9.147.E2.3 Using R4 series with frame (64 mm & above) x
(50 mm & above) & sash (64 mm & above) x (70
mm & above) & mullion (64 mm & above) x (70
mm & above). (Height above 1.8 metre). 0.00 Sqm 13477.10 0
3.10 9.147.F1 Casement door single panel with zinc alloy
(zamak) 3D hinges, multi-point locking system
with cylinder, zinc alloy (zamak) powder coated
handles on both sides. 0.00
9.147.F1.1 Using R3 series with frame (55 mm & above) x
(50 mm & above) & sash (55 mm & above) x (85
mm & above) (Height upto 2.5 metre). 4.00 Sqm 12496.05 49984
Total Wood Work : 125300 1560
4.00 10.0 STEEL WORK
4.01 10.25 Steel work welded in built up sections/ framed
work, including cutting, hoisting, fixing in position
and applying a priming coat of approved steel
primer using structural steel etc. as required.
4.02 10.27 Providing and fixing carbon steel galvanised (
minimum coating 5 micron) dash fastener of 10
mm dia double threaded 6.8 grade (yield strength
480 N/mm2), counter sunk head, comprising of
10 m dia polyamide PA 6 grade sleeve, including
drilling of hole in frame , concrete/ masonry, etc.
as per direction of Engineer-in-charge.
4.03 10.28 Providing and fixing stainless steel (Grade 304)
railing made of Hollow tubes, channels, plates
etc., including welding, grinding, buffing, polishing
and making curvature (wherever required) and
fitting the same with necessary stainless steel
nuts and bolts complete, i/c fixing the railing with
necessary accessories & stainless steel dash
fasteners, stainless steel bolts etc., of required
size, on the top of the floor or the side of waist
slab with suitable arrangement as per approval of
Engineer-in-charge, (for payment purpose only
weight of stainless steel members shall be
considered excluding fixing accessories such as
nuts, bolts, fasteners etc.).
Total Steel Work : 0 0
5.00 11.0 FLOORING
5.01 11.41 Providing and laying vitrified floor tiles in different
sizes (thickness to be specified by the
manufacturer) with water absorption less than
0.08% and conforming to IS: 15622, of approved
make, in all colours and shades, laid on 20mm
thick cement mortar 1:4 (1 cement : 4 coarse
sand), jointing with grey cement slurry @ 3.3 kg/
sqm including grouting the joints with white
cement and matching pigments etc., complete.
Item DSR 2023 Amount
Description of Item Quantity Unit Rate
5.02 11.46 Providing and laying Glazed Vitrified tiles in
different sizes (thickness to be specified by
manufacturer), with water absorption less than
0.08 % and conforming to I.S. 15622, of
approved make, in all colours & shade, in
skirting, dado, riser of steps, over 12 mm thick
bed of cement mortar 1:3 (1 cement: 3 coarse
sand), jointing with grey cement slurry @ 3.3 kg/
sqm including grouting the joint with white cement
& matching pigments etc. complete.
Total Flooring Work : 175774 0
7.00 13.0 FINISHING
7.01 13.4 12 mm cement plaster of mix :
7.02 13.16 6 mm cement plaster of mix:
7.03 13.11 18 mm cement plaster in two coats under layer
12 mm thick cement plaster 1:5 (1 cement : 5
coarse sand) finished with a top layer 6 mm thick
cement plaster 1:6 (1 cement : 6 fine sand). 63.00 Sqm 518.55 32669
7.04 13.26 Providing and applying plaster of paris putty of 2
mm thickness over plastered surface to prepare
the surface even and smooth complete. 194.00 Sqm 262.70 50964
7.05 13.83 Wall painting with premium acrylic emulsion paint
of interior grade, having VOC (Volatile Organic
Compound ) content less than 50 grams/ litre of
approved brand and manufacture, including
applying additional coats wherever required to
achieve even shade and colour.
13.83.2 Two coats
7.06 13.61 Factory made 50mmx47 mm with a wall thickness
of 5 mm door frame PVC extruded sheet
including carriage
13.61.1 Two or more coats on new work 300.00 Sqm 155.90 46770
7.07 13.45 Finishing walls with textured exterior paint of
required shade :
13.45.1 New work (Two or more coats applied @ 3.28
ltr/10 sqm) over and including priming coat of
exterior primer applied @ 2.20kg/10 sqm 126.00 Sqm 223.60 28174
7.08 13.80 Providing and applying white cement based putty
of average thickness 1 mm, of approved brand
and manufacturer, over the plastered wall surface
to prepare the surface even and smooth
Total Finishing Work : 237872 0
8.00 21.0 ALUMINIUM WORKS
Item DSR 2023 Amount
Description of Item Quantity Unit Rate
8.01 21.1 Providing and fixing aluminium work for doors,
windows, ventilators and partitions with extruded
built up standard tubular sections/ appropriate Z
sections and other sections of approved make
conforming to IS: 733 and IS: 1285, fixing with
dash fasteners of required dia and size, including
necessary filling up the gaps at junctions, i.e. at
top, bottom and sides with required EPDM
rubber/ neoprene gasket etc. Aluminium sections
shall be smooth, rust free, straight, mitred and
jointed mechanically wherever required including
cleat angle, Aluminium snap beading for glazing /
paneling, C.P. brass / stainless steel screws, all
complete as per architectural drawings and the
directions of Engineer-in-charge. (Glazing,
paneling and dash fasteners to be paid for
21.1.1 For fixed portion
21.1.1.2 Powder coated aluminium (minimum thickness of
powder coating 50 micron) 0.00 Kgs 530.9 0
8.02 21.1.2 For shutters of doors, windows & ventilators
including providing and fixing hinges/ pivots and
making provision for fixing of fittings wherever
required including the cost of EPDM rubber /
neoprene gasket required (Fittings shall be paid
for separately)
21.1.2.2 Powder coated aluminium (minimum thickness of
powder coating 50 micron) 0.00 Kgs 634.45 0
8.03 21.3 Providing and fixing glazing in aluminium door,
window, ventilator shutters and partitions etc. with
EPDM rubber / neoprene gasket etc. complete as
per the architectural drawings and the directions
of engineer-in-charge . (Cost of aluminium snap
beading shall be paid in basic item):
i) 21.3.2 With float glass panes of 5 mm thickness (weight
not less than 12.50 kg/sqm) 10.00 Sqm 1505.25 15053
ii) 21.3.3 With float glass panes of 8 mm thickness (weight
not less than 20 kg/sqm) 0.00 Sqm 1685.40 0
8.04 21.8 Filling the gap in between aluminium frame &
adjacent RCC/ Brick/ Stone work by providing
weather silicon sealant over backer rod of
approved quality as per architectural drawings
and direction of Engineer-in-charge complete.
21.8.1 Upto 5mm depth and 5 mm width 26.00 Metre 96.75 2516
Total Aluminium Works : 17568 0
9.00 22.0 WATER PROOFING
9.01 22.3 Providing and laying water proofing treatment to
vertical and horizontal surfaces of depressed
portions of W.C., kitchen and the like consisting
Item DSR 2023 Amount
Description of Item Quantity Unit Rate
(i) Ist course of applying cement slurry @ 4.4
kg/sqm mixed with water proofing compound
conforming to IS : 2645 in recommended
proportions including rounding off junction of
vertical and horizontal surface.
(ii) IInd course of 20 mm cement plaster 1:3 (1
cement : 3 coarse sand) mixed with water
proofing compound in recommended proportion
including rounding off junction of vertical and
horizontal surface.
(iii) IIIrd course of applying blown or residual
bitumen applied hot at 1.7 kg. per sqm of area.
(iv) IVth course of 400 micron thick PVC sheet.
(Overlaps at joints of PVC sheet should be 100
mm wide and pasted to each other with bitumen 9.00 Sqm 769.60 6926
Total Water Proofing work : 6926 0
10.00 15.0 DISMANTLING AND DEMOLISHING
10.01 15.2 Demolishing cement concrete manually/ by
mechanical means including disposal of material
within 50 metres lead as per direction of Engineer
15.2.1 Nominal concrete 1:3:6 or richer mix (including
equivalent design mix) 1.00 Cum 2434.25 2434
10.02 15.3 Demolishing R.C.C. work manually/ by
mechanical means including stacking of steel
bars and disposal of unserviceable material
within 50 metres lead as per direction of Engineer
10.03 15.7 Demolishing brick work manually/ by mechanical
means including stacking of serviceable material
and disposal of unserviceable material within 50
metres lead as per direction of Engineer-in-
15.7.4 In cement mortar
10.04 15.12 Dismantling doors, windows and clerestory
windows (steel or wood) shutter including
chowkhats, architrave, holdfasts etc. complete
and stacking within 50 metres lead :
15.12.1 Of area 3 sq. metres and below 13.00 Each 367.20 4774
15.12.2 Of area beyond 3 sq. metres 1.00 Each 502.75 503
10.05 15.19 Dismantling steel work manually/ by mechanical
means in built up sections without dismembering
and stacking within 50 metres lead as per
direction of Engineer-in-charge. 10.00 Kg 3.85 39
10.06 15.23 Dismantling tile work in floors and roofs laid in
cement mortar including stacking material within
50 metres lead.
15.23.1 For thickness of tiles 10 mm to 25 mm 63.00 Sqm 73.40 4624
Item DSR 2023 Amount
Description of Item Quantity Unit Rate
10.07 15.56 Dismantling old plaster or skirting raking out
joints and cleaning the surface for plaster
including disposal of rubbish to the dumping
ground within 50 metres lead. 367.00 Sqm 54.65 20057
10.09 15.60 Disposal of building rubbish / malba / similar
unserviceable, dismantled or waste materials by
mechanical means, including loading,
transporting, unloading to approved municipal
dumping ground or as approved by Engineer-in-
charge, beyond 50 m initial lead, for all leads
including all lifts involved.
Total Dismantling and Demolish work : 67936.15 0.00
SCHEDULE OF QUANTITIES - SANITARY & PLUMBING WORKS
S NO TOTAL AMOUNT TOTAL AMOUNT
S NO TOTAL AMOUNT TOTAL AMOUNT
NO DESCRIPTION UNIT QUANTITY RATE
2023 DSR (INR) NON-DSR (INR)
Supply, Installation, Testing and Commisioning of SINGLE LEVER CONCEALED BASIN
MIXER (WALL MOUNTED) WITH SPOUT (COMPOSITE ONE PIECE BODY)
Supply, Installation, Testing and Commisioning of TABLE TOP BASIN, SIZE:
Supply, Installation, Testing and Commisioing of suitable compatible WASTE COUPLING
32MM- FULL THREAD- WITH CERAMIC CAP-*130MM HEIGHT *65MM CERAMIC CAP
Supply, Installation, Testing and Commisioing of BOTTLE TRAP (WITH INTERNAL
MR 4 PARTITION) 32mm SIZE WITH 300mm & 190mm LONG WALL CONNECTION PIPES & EACH 1 3284.00 3284.00
Supply, Installation, Testing and Commisiong of RIMLESS, BLIND INSTALLATION WALL
MR 5 HUNG WC WITH UF SOFT CLOSE SLIM SEAT COVER, HINGES AND ACCESSORIES EACH 2 15087.00 30174.00
SET, SIZE: 375X520X400 MM
MR 6 Supply, Installation, Testing and Commisiong of PNEUMATIC CONTROL PLATE EACH 2 6641.00 13282.00
Supply, Installation, Testing and Commisiong of ANGULAR STOP COCK WITH WALL
MR 7 FLANGE EACH 2 4823.00 9646.00
Supply, Installation, Testing and Commisiong of CONCEALED STOP COCK WITH
MR 8 ADJUSTABLE WITH WALL FLANGE 15mm EACH 2 4965.00 9930.00
Supply, Installation, Testing and Commisiong of HAND SHOWER (HEALTH FAUCET) WITH
MR 9 8mm DIA 1.2 METER LONG FLEXIBLE TUBE EACH 2 2541.00 5082.00
Supply, HOOK ALD-CHR-573
Installation, Testing andorCommisiong
equivalent of PNEUMATIC SINGLE PIECE SLIM
MR 10 CONCEALED CISTERN BODY WITH INSTALLATION KIT & “S-TYPE” DRAIN PIPE EACH 2 8044.00 16088.00
CONNECTION SET FOR WALL HUNG WC (WITHOUT FLUSH CONTROL PLATE)
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings
17.28 complete.
17.28.2 Flexible pipe
Providing and fixing mirror of superior glass (of approved quality) complete with 6mm thick
hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved
13 quality conforming to IS : 8931
18.53.1 15 mm nominal bore EACH 6 574.30 3445.80
Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast
(spun) iron pipes and making good the same with cement concrete 1:3:6 (1 cement: 3 coarse
17.61 sand: 6 graded stone aggregate 12.5 mm nominal size) including necessary plaster and
pointing in cement mortar 1:4 (1 cement : 4 coarse sand) :
18.76 Cutting holes upto 30x30cm in walls including making good the same.
18.76.1 With common burnt clay F.P.S. (non modular) bricks EACH 2 416.80 833.60
Making chases upto 7.5 X 7.5 cm in walls including making good and finishing with matching
surface after housing G.I. pipe etc.
Digitally signed by AMIT
S NO TOTAL AMOUNT TOTAL AMOUNT
S NO TOTAL AMOUNT TOTAL AMOUNT
NO DESCRIPTION UNIT QUANTITY RATE
2023 DSR (INR) NON-DSR (INR)
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for
hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing
18.7 the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one
step CPVC solvent cement and testing of joints complete as per direction of Engineer in
Internal work - Exposed on wall
17 20mm nominal outer dia pipes 335.00 3350.00
18.7.3 25mm nominal outer dia pipes METRE 20 401.55 8031.00
18.7.4 32mm nominal outer dia pipes METRE 2 518.75 1037.50
18.7.5 40mm nominal outer dia pipes METRE 2 702.95 1405.90
18.7.6 50mm nominal outer dia pipes METRE 2 934.15 1868.30
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for
hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe
with clamps at 1.00 m spacing.
18.8 This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of
cutting chases and making good the same including testing of joints complete as per
direction of Engineer in Charge.
Concealed work including cutting chases and making good the walls etc.,
18.8.1 15mm nominal outer dia pipes METRE 20 497.80 9956.00
18.8.2 20mm nominal outer dia pipes METRE 10 537.60 5376.00
18.8.3 25mm nominal outer dia pipes METRE 5 627.25 3136.25
18.8.4 32mm nominal outer dia pipes METRE 5 739.30 3696.50
18.51 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS
19 standards and weighing not less than 690 gms.
18.51.1 15 mm nominal bore EACH 1 798.95 798.95
Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes for
soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all
neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or
without doors), reducers, WC connectors, couplers, expansion joints / bellows, cowels,
clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp &
hangers etc. in concealed / inside duct / under floor & basement ceiling / external work etc.
including chase cutting as required, excavation and back filling in all kind of soils, suspended
from floor under false ceiling or embedding the pipes laid under floors / building in 75 mm.
20 alround 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm
nominal size) including cost of shuttering for proper completion of the work, breaking and
making good the walls and floors etc. after pipes have been duly laid and tested. The rubber
ring shall confirm to IS:5382.
The Pipes will be supported with threaded G I rods & U clamps with nuts, washers etc on
50x50x5 mm slotted angle. The cost will include all support arrangements. The work includes
commissioning of all pipes lines as per drawings and specifications and as directed by engg-
in-charge at site.
a 110 mm dia (Wall Thickness - 3.2 to 3.8 mm) METRE 20.00 536.00 10720.00
b 75 mm dia (Wall Thickness - 3.2 to 3.8 mm) METRE 5.00 416.00 2080.00
Digitally signed by AMIT
S NO TOTAL AMOUNT TOTAL AMOUNT
S NO TOTAL AMOUNT TOTAL AMOUNT
NO DESCRIPTION UNIT QUANTITY RATE
2023 DSR (INR) NON-DSR (INR)
Providing, fixing, jointing and testing in position ISI marked (IS:4985) UPVC pipes of min 6
Kg/ Sqcm rating with fitting for waste pipe from fixtures to floor trap including reduces,
enlarger, socket, couplers, bends, tees etc including fixing at wall/ ceiling level supported by
MR 21 clamp & hangers etc. cutting holes in wall/ floors/ slabs and making good the same with
cement concrete 1:2:4 complete as required.
Providing & fixing UPVC Floor trap of self cleansing design with stainless steel grating
MR 22 complete in all respects.
Plain Floor Trap (4" Ht) with 50 / 75 outlet and with height raiser EACH 4 536.00 2144.00
MR 23 Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor traps. EACH 4 726.00 2904.00
Providing & fixing of SS Floor Cleanout, round or square with rubber seal and flat round
cover with screws and other required fitting complete as required.
Supply, Installation, Testing and Commisiong of HIGH FLOW SINGLE LEVER
MR 27 CONCEALED DIVERTOR FOR BATH & SHOWER EACH 1 18938.00 18938.00
Supply, Installation, Testing and Commisiong of SPOUT FOR BUILT IN BATH/SHOWER
Supply, Installation, Testing and Commisiong of OVERHEAD SHOWER 350x350MM
MR 29 ROUND EDGE SQUARE HEAD SINGLE FLOW (BODY & FACE PLATE STAINLESS EACH 1 24100.00 24100.00
STEEL WITH CHROME PLATED) WITH RUBIT CLEANING SYSTEM
MR 30 Supply, Installation, Testing and Commissioning of 15 litre geyser EACH 2 12004.00 24008.00
MR 31 Supply, Installation, Testing and Commisiong of SOAP DISH HOLDER EACH 1 4392.00 4392.00
MR 32 Supply, Installation, Testing and Commisiong of TUMBLER HOLDER EACH 1 4309.00 4309.00
Supply, Installation, Testing and Commisiong of TOWEL RACK 600MM LONG WITH
MR 33 LOWER HANGER
MR 34 Supply, Installation, Testing and Commisiong of ROBE HOOK EACH 1 2045.00 2045.00
MR 35 Supply, Installation, Testing and Commisiong of TOILET ROLL HOLDER WITH COVER EACH 1 4978.00 4978.00
MR 36 Supply, Installation, Testing and Commisiong of TOWEL HOLDER EACH 1 3336.00 3336.00
17.10 37 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and
17.10.1 stainlessSink
Kitchen steelwith
Drain including painting of fittings and brackets, cutting and making good the walls
Digitally signed by AMIT
SCHEDULE OF QUANTITIES - ELECTRICAL WORKS
DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT
DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT
S NO UNIT QUANTITY RATE
2023 DSR (INR) NON-DSR (INR)
A POINT WIRING
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC
insulated copper conductor single core cable in surface / recessed medium class PVC
1.10 conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5
sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.
Wiring for group controlled (looped) light point/ fan point/call bell point (without independent
switch etc.) with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in
1.55 surface / recessed PVC conduit, and earthing the point with 1.5 sq.mm. FRLS PVC insulated
copper conductor single core cable etc as required.
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single
A.3 1.12 core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FRLS Metre 520 334.00 173680.00
PVC insulated copper conductor single core cable for loop earthing as required.
Supplying and fixing following modular switch/ socket on the existing modular plate & switch
1.24 box including connections but excluding modular plate etc. as required.
1.24.4 3 pin 5/6 amp socket outlet Each 17 122.00 2074.00
1.24.5 6 pin 15/16 amp socket outlet Each 12 197.00 2364.00
Supplying and fixing modular blanking plate on the existing modular plate & switch box
A.6 1.26 excluding modular plate as required. Each 20 40.00 800.00
Supplying and fixing following size/module, GI box along with Modular base & cover plate on
existing modular metal boxes etc. as required.
B SUBMAIN AND CONTROL WIRING
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC
1.14 insulated copper conductor, single core cable in surface/ recessed medium class PVC
conduit as required
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
1.14.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Metre 120 275.00 33000.00
1.14.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Metre 20 334.00 6680.00
1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 5 439.00 2195.00
1.14.10 4 X 10 sq. mm + 2 X 6 sq. mm earth wire Metre 20 1005.00 20100.00
Digitally signed by AMIT
DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT
DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT
S NO UNIT QUANTITY RATE
2023 DSR (INR) NON-DSR (INR)
1.14.11 4 X 16 sq. mm + 2 X 6 sq. mm earth wire Metre 10 1365.00 13650.00
Supplying and making end termination with brass compression gland and aluminium lugs for
9.1 following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1
C.1 KV grade as required.
Supply of following XPLE armourned 1.1 KV grade conforming to I.S.7098/1554Aluminium
Conductor Cables :
MR Supply of following sizes of PVC sheathed PVC/XLPE insulated Aluminium conductor
C.2 armoured cable of 1.1 KV grade conforming to IS:7098 part-1 / IS:1554 part-1 respectively &
(a) 3.5 C x 35 Sqmm XLPE cable RM 10 378.00 3780.00
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit
2.10 breaker suitable for inductive load of following poles in the existing MCB DB complete with
D.2 connections, testing and commissioning etc. as required.
2.10.1 Single pole Each 30 256.00 7680.00
Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB
D.3 complete with connections, testing and commissioning etc. as required.
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB
distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral
D.4 bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as
required. (But without MCB/ RCCB/ Isolator)
Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts,
2.14 residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in
D.5 the existing MCB DB complete with connections, testing and commissioning etc. as required.
FIXTURES AND FITTINGS
1 1.24.6 Telephone socket outlet Set 1 148.00 148.00
2 1.24.7 TV socket outlet Set 3 148.00 444.00
Supplying and drawing following pair, 0.5 sq.mm FR PVC insulated copper conductor,
1.18.2 unarmoured telephone cable in the existing surface / recessed steel / PVC conduit as
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE
insulated, shielded with fine tinned copper braid and protected with PVC sheath in the
4 1.19 exisitng surface/recessed steel/ PVC conduit as required MTR 60 47.00 2820.00
Digitally signed by AMIT
DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT
DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT
S NO UNIT QUANTITY RATE
2023 DSR (INR) NON-DSR (INR)
Supplying and fixing of following sizes medium class PVC conduit aong with accessories in
surface/ recess including cutting the wall and making good the same incase of recessed
1.21 conduit as required
Supply, Installation, testing and Commissioning of LED Tubelight 1200mm 20W
7 MR Supply, Installation, testing and Commissioning of LED Bracket Light 15W Each 13 1500.00 19500.00
Supplying and fixing two module stepped type electronic fan regulator on the existing
8 1.25 modular plate switch box including connections but excluding modular plate etc. as required. Each 5 369.00 1845.00
Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes
containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including
connections etc. as required.
Installation, testing and commissioning of ceiling fan including wiring the down rods of
standard lenght (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single
10 1.45 core cable including providing and fixing phenolic sheet cover on the fan box as required etc Nos. 5 339.00 1695.00
Installation of exhaust fan in the existing opening, including making good the damage,
1.50.1 connection, testing, commissioning etc. as required.
Upto 450 mm sweep Nos. 3 450.00 1350.00
12 1.51 Extra for fixing the louvers/ shutters complete with frame for exhaust fan of all sizes. Nos. 3 207.00 621.00
Supply of ISI marked energy efficient exhaust fan plastic ideal for mounting on glass window
13 MR with 200mm sweep Each 3 1800.00 5400.00
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling
fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm
long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not
less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350
RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator
unit for speed control and all remaining accessories including safety pin, nut bolts, washers,
temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable
for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.
Total of Electrical items 369813.00 32680.00
Digitally signed by AMIT
Renovation of AICL Flats (Apartments with terrace) at
D6-Vasant Kunj, New Delhi
S NO DESCRIPTION
2 SANITARY/ PLUMBING WORKS 53,560.65 260,487.00
3 ELECTRICAL WORKS 369,813.00 32,680.00
B Total cost (DSR +NDSR) for one unit 1,744,375.50
C G-Total (13 units) 22,676,881.50
ABSTRACT OF COST
S. No. ITEM OF CIVIL WORK AMOUNT
1.00 Brick Work Rs. 36425 0
2.00 Marble Work Rs. 18198 0
4.00 Steel Work Rs. 67266 0
5.00 Flooring Rs. 175774 0
6.00 Roofing Rs. 14613 0
7.00 Finishing Rs. 237872 0
8.00 Aluminium Rs. 17568 0
9.00 Waterproofing Rs. 176955 0
10.00 Dismantling and Demolish Rs. 156305 0
Amount Rs. 1026275 1560
Total Amount Rs. 1027835
Total Amount Rs. 1027835
SCHEDULE OF QUANTITIES
Item DSR 2023 Amount
Description of Item Quantity Unit Rate
1.00 6.0 BRICK WORK
1.01 6.1 Brick work with common burnt clay F.P.S. (non
modular) bricks of class designation 7.5 in
foundation and plinth in:
6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) 1.00 Cum 7132.25 7132
1.02 6.32 Brick work with clay flyash F.P.S. (non modular)
brick of class designation 7.5 in superstructure
above plinth level up to floor five level in :
6.32.2 Cement mortar 1:6 (1 cement : 6 coarse sand) 2.00 Cum 9095.05 18190
1.03 6.12 Half brick masonry with common burnt clay F.P.S.
(non modular) bricks of class designation 7.5 in
foundations and plinth in :
6.12.2 Cement mortar 1:4 (1 cement : 4 coarse sand) 5.00 Sqm 905.05 4525
1.04 6.45 Half brick masonry with non modular fly ash bricks
of class designation 10, conformingio IS :12894,
in super structure above plinth and upto floor V
6.45.2 Cement mortar 1:4 (1 cement :4 coarse sand) 5.00 Sqm 1105.80 5529
1.05 6.15 Extra for providing and placing in position 2 Nos
6mm dia. M.S. bars at every third course of half 10.00 Sqm 104.80 1048
Total Brick Work : 36425 0
2.00 8.0 MARBLE WORK
2.01 8.2 Providing and fixing 18 mm thick gang saw cut,
mirror polished, premoulded and prepolished,
machine cut for kitchen platforms, vanity
counters, window sills, facias and similar locations
of required size, approved shade, colour and
texture laid over 20 mm thick base cement mortar
1:4 (1 cement : 4 coarse sand), joints treated with
white cement, mixed with matching pigment,
epoxy touch ups, including rubbing, curing, edge
moulding, facia and polishing to edges to give
high gloss finish etc. complete at all levels.
8.2.2 Granite Stone Slab of Colour Black, Cherry/Ruby
8.2.2.1 Area of slab upto 0.50 sqm 3.00 Sqm 5413.50 16241
2.02 8.2.2.2 Area of slab over 0.50 sqm 0.00 Sqm 5136.30 0
2.03 8.5 Extra for providing opening of required size &
shape for wash basin/ kitchen sink in kitchen
platform, vanity counter and similar location in
marble/Granite/stone work, including necessary 2.00 each 978.70 1957
holes for pillar taps etc. including moulding,
rubbing and polishing of cut edges etc. complete.
Total Marble Work : 18198 0
3.00 9.0 WOOD WORK
3.01 9.21 Providing and fixing ISI marked flush door
shutters conforming to IS : 2202 (Part I) non-
decorative type, core of block board construction
with frame of 1st class hard wood and well
matched commercial 3 ply veneering with vertical
grains or cross bands and face veneers on both
faces of shutters:
9.21.1 35 mm thick including ISI marked Stainless Steel
butt hinges with necessary screws
3.02 9.127 Providing & Fixing decorative high pressure
laminated sheet of plain / wood grain in gloss /
matt / suede finish with high density protective
surface layer and reverse side of adhesive
bonding quality conforming to IS : 2046 Type S,
including cost of adhesive of approved quality.
3.03 9.23 Extra for providing lipping with 2nd class teak
wood battens 25 mm minimum depth on all edges
of flush door shutters (over all area of door
shutter to be measured).
3.04 MR Providing and fixing Stainless steel satin finish SS
304 grade Tower Bolts SS screws for wooden
doors of approved make and model all complete
as per the directions of Engineer-in-charge
3.05 9.165 Providing and fixing bright /matt finished Stainless
Steel handles of approved quality & make with
necessary screws etc all complete.
3.06 9.113 Providing and fixing bright finished 100 mm
mortice lock with 6 levers without pair of handles
of approved quality for aluminium door, with 3.00 Each 850.05 2550
necessary screws etc complete as per direction
of Engineer- in-charge.
Item DSR 2023 Amount
Description of Item Quantity Unit Rate
3.07 9.101 Providing and fixing aluminium hanging floor door
stopper ISI marked anodised (anodic coating not
less than grade AC 10 as per IS : 1868)
transparent or dyed to required colour and shade
with necessary screws etc. complete:
9.101.2 Twin rubber stopper 3.00 Each 72.35 217
3.08 9.83 Providing and fixing aluminium die cast body
tubular type universal hydraulic door closer
(having brand logo with ISI, IS : 3564, embossed
on the body, door weight upto 35 kg and door 5.00 Each 1124.85 5624
width upto 700 mm), with necessary accessories
and screws etc. complete.
3.09 9.147A Providing and fixing factory made uPVC
glazed/wire mesh windows/ doors comprising of
lead free uPVC multi-chambered frame, sash and
mullion/coupler (where ever required) extruded
profiles having minimum wall thickness of 1.70
mm for Series R1 and R2 profiles and 2.10 mm
for Series R3 and R4 profiles conforming to EN:
12608 in any shape, colour and design duly
reinforced with galvanized mild steel section
made of required shape & size as per CPWD
Specification, uPVC extruded glazing beads,
interlocks and lnline sash adaptor (where ever
required) of appropriate dimension, EPDM
gasket, hardware, SS 304 grade fasteners of
minimum 8 mm dia with countersunk head,
comprising of matching polyamide PA6 grade
sleeve for fixing frame to finished wall as per IS
1367 : Part 1 to 14, plastic packers, plastic caps
and necessary stainless steel screws etc. Profile
of frame, sash & mullion (if required) shall be
mitred cut and fusion welded/mechanically jointed
duly sealed at all corners, including drilling of
holes for fixing hardware and drainage of water
etc. After fixing frame the gap between frame and
adjacent finished wall shall be filled with weather
proof silicon sealant over backer rod of approved
size and quality, all complete as per approved
drawing conforming to CPWD specification &
direction of Engineer-in-Charge. Section of steel
reinforcement and cross sections of uPVC
Wire meshto be as
/ per designofapproved
Glazing by Engineer-
plain/ toughened/
laminated/ double glass unit with/ without high
performance coatings as per design requirements
and conforming to IS: 3548 & IS: 16231 shall be
paid separately.
Note:- Structural design proof checked
from a Government Engineering Institute, to be
provided by the manufacturer for
(i) Sites with basic wind speed > 45
m/sec as per IS 875 - Part 3
(ii) Sites with structure height more than 20m for
all wind speeds
9.147.E2 Casement window double panels with fixed
mullion with S.S. 304 friction hinges as per size
and weight of sash, multi-point locking system,
zinc alloy (zamak) powder coated handles.
a) 9.147.E2.1 Using R2 series with frame (39 mm & above) x
(39 mm & above) & sash (39 mm & above) x (60
mm & above) & mullion (39 mm & above) x (60
mm & above). (Height upto 1.2 metre).
b) 9.147.E2.3 Using R4 series with frame (64 mm & above) x
(50 mm & above) & sash (64 mm & above) x (70
mm & above) & mullion (64 mm & above) x (70
mm & above). (Height above 1.8 metre).
3.10 9.147.F1 Casement door single panel with zinc alloy
(zamak) 3D hinges, multi-point locking system
with cylinder, zinc alloy (zamak) powder coated
handles on both sides.
9.147.F1.1 Using R3 series with frame (55 mm & above) x
(50 mm & above) & sash (55 mm & above) x (85 4.00 Sqm 12496.05 49984
mm & above) (Height upto 2.5 metre).
Total Wood Work : 125300 1560
4.00 10.0 STEEL WORK
4.01 10.25 Steel work welded in built up sections/ framed
work, including cutting, hoisting, fixing in position
and applying a priming coat of approved steel
primer using structural steel etc. as required.
a) 10.25.1 In stringers, treads, landings etc. of stair cases,
including use of chequered plate wherever 500.00 Kg 123.60 61800
required, all complete
b) 10.25.2 In gratings, frames, guard bar, ladder, railings,
brackets, gates and similar works
Item DSR 2023 Amount
Description of Item Quantity Unit Rate
4.02 10.27 Providing and fixing carbon steel galvanised (
minimum coating 5 micron) dash fastener of 10
mm dia double threaded 6.8 grade (yield strength
480 N/mm2), counter sunk head, comprising of 10
m dia polyamide PA 6 grade sleeve, including
drilling of hole in frame , concrete/ masonry, etc.
as per direction of Engineer-in-charge.
Item DSR 2023 Amount
Description of Item Quantity Unit Rate
4.03 10.28 Providing and fixing stainless steel (Grade 304)
railing made of Hollow tubes, channels, plates
etc., including welding, grinding, buffing, polishing
and making curvature (wherever required) and
fitting the same with necessary stainless steel
nuts and bolts complete, i/c fixing the railing with
necessary accessories & stainless steel dash
fasteners, stainless steel bolts etc., of required
size, on the top of the floor or the side of waist
slab with suitable arrangement as per approval of
Engineer-in-charge, (for payment purpose only
weight of stainless steel members shall be
considered excluding fixing accessories such as
nuts, bolts, fasteners etc.).
Total Steel Work : 67266 0
5.00 11.0 FLOORING
5.01 11.41 Providing and laying vitrified floor tiles in different
sizes (thickness to be specified by the
manufacturer) with water absorption less than
0.08% and conforming to IS: 15622, of approved
make, in all colours and shades, laid on 20mm
thick cement mortar 1:4 (1 cement : 4 coarse
sand), jointing with grey cement slurry @ 3.3 kg/
sqm including grouting the joints with white
cement and matching pigments etc., complete.
5.02 11.46 Providing and laying Glazed Vitrified tiles in
different sizes (thickness to be specified by
manufacturer), with water absorption less than
0.08 % and conforming to I.S. 15622, of approved
make, in all colours & shade, in skirting, dado,
riser of steps, over 12 mm thick bed of cement
mortar 1:3 (1 cement: 3 coarse sand), jointing
with grey cement slurry @ 3.3 kg/ sqm including
grouting the joint with white cement & matching
pigments etc. complete.
Total Flooring Work : 175774 0
6.00 12.0 ROOFING
6.01 12.21 Providing gola 75x75 mm in cement concrete
1:2:4 (1 cement: 2 coarse sand: 4 stone
aggregate 10 mm and down gauge), including
finishing with cement mortar 1:3 (1 cement: 3 fine
sand) as per standard design.
12.21.1 In 75x75 mm deep chase. 43.00 Metre 305.15 13121
6.02 12.22 Making khurra 45x45cm with average minimum
thickness of 5 cm cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate of 20mm nominal size) over PVC sheet
1mx1mx400 micron, finished with 12mm cement 5.00 Each 298.25 1491
plaster 1:3 (1 cement : 3 coarse sand) and a coat
of neat cement rounding the edges and making
and finishing the outlet complete :
Total Roofing Work : 14613 0
7.00 13.0 FINISHING
7.01 13.4 12 mm cement plaster of mix :
7.02 13.16 6 mm cement plaster of mix:
7.03 13.11 18 mm cement plaster in two coats under layer 12
mm thick cement plaster 1:5 (1 cement : 5 coarse
sand) finished with a top layer 6 mm thick cement
plaster 1:6 (1 cement : 6 fine sand).
7.04 13.26 Providing and applying plaster of paris putty of 2
mm thickness over plastered surface to prepare
the surface even and smooth complete. 194.00 Sqm 262.70 50964
7.05 13.83 Wall painting with premium acrylic emulsion paint
of interior grade, having VOC (Volatile Organic
Compound ) content less than 50 grams/ litre of
approved brand and manufacture, including
applying additional coats wherever required to
achieve even shade and colour.
7.06 13.61 Painting with synthetic enamel paint of approved
brand and manufacture to give an even shade :
13.61.1 Two or more coats on new work 300.00 Sqm 155.90 46770
7.07 13.45 Finishing walls with textured exterior paint of
required shade :
13.45.1 New work (Two or more coats applied @ 3.28
ltr/10 sqm) over and including priming coat of 126.00 Sqm 223.60 28174
exterior primer applied @ 2.20kg/10 sqm
7.08 13.80 Providing and applying white cement based putty
of average thickness 1 mm, of approved brand
and manufacturer, over the plastered wall surface 126.00 Sqm 156.05 19662
to prepare the surface even and smooth complete.
Item DSR 2023 Amount
Description of Item Quantity Unit Rate
Total Finishing Work : 237872 0
8.00 21.0 ALUMINIUM WORKS
8.01 21.1 Providing and fixing aluminium work for doors,
windows, ventilators and partitions with extruded
built up standard tubular sections/ appropriate Z
sections and other sections of approved make
conforming to IS: 733 and IS: 1285, fixing with
dash fasteners of required dia and size, including
necessary filling up the gaps at junctions, i.e. at
top, bottom and sides with required EPDM rubber/
neoprene gasket etc. Aluminium sections shall be `
smooth, rust free, straight, mitred and jointed
mechanically wherever required including cleat
angle, Aluminium snap beading for glazing /
paneling, C.P. brass / stainless steel screws, all
complete as per architectural drawings and the
directions of Engineer-in-charge. (Glazing,
paneling and dash fasteners to be paid for
21.1.1 For fixed portion
21.1.1.2 Powder coated aluminium (minimum thickness of
powder coating 50 micron)
8.02 21.1.2 For shutters of doors, windows & ventilators
including providing and fixing hinges/ pivots and
making provision for fixing of fittings wherever
required including the cost of EPDM rubber /
neoprene gasket required (Fittings shall be paid
for separately)
21.1.2.2 Powder coated aluminium (minimum thickness of
powder coating 50 micron)
8.03 21.3 Providing and fixing glazing in aluminium door,
window, ventilator shutters and partitions etc. with
EPDM rubber / neoprene gasket etc. complete as
per the architectural drawings and the directions
of engineer-in-charge . (Cost of aluminium snap
beading shall be paid in basic item):
i) 21.3.2 With float glass panes of 5 mm thickness (weight
not less than 12.50 kg/sqm)
ii) 21.3.3 With float glass panes of 8 mm thickness (weight
not less than 20 kg/sqm)
8.04 21.8 Filling the gap in between aluminium frame &
adjacent RCC/ Brick/ Stone work by providing
weather silicon sealant over backer rod of
approved quality as per architectural drawings
and direction of Engineer-in-charge complete.
21.8.1 Upto 5mm depth and 5 mm width 26.00 Metre 96.75 2516
Total Aluminium Works : 17568 0
9.00 22.0 WATER PROOFING
9.01 22.3 Providing and laying water proofing treatment to
vertical and horizontal surfaces of depressed
portions of W.C., kitchen and the like consisting of:
(i) Ist course of applying cement slurry @ 4.4
kg/sqm mixed with water proofing compound
conforming to IS : 2645 in recommended
proportions including rounding off junction of
vertical and horizontal surface.
(ii) IInd course of 20 mm cement plaster 1:3 (1
cement : 3 coarse sand) mixed with water
proofing compound in recommended proportion
including rounding off junction of vertical and
horizontal surface.
(iii) IIIrd course of applying blown or residual
bitumen applied hot at 1.7 kg. per sqm of area.
(iv) IVth course of 400 micron thick PVC sheet.
(Overlaps at joints of PVC sheet should be 100
mm wide and pasted to each other with bitumen
9.02 22.22A Providing and applying fibre reinforced
elastomeric liquid water proofing membrane with
resilient acrylic polymers having Sun Reflectivity
Index (SRI) of 105 on top of concrete roof in three
coats @10.76 litre/ 10 sqm. One coat of self-
priming of elastomeric waterproofing liquid
(dilution with water in the ratio of 3:1) and two
coats of undiluted elastomeric waterproofing liquid 75.00 Sqm 563.10 42233
(dry film thickness of complete application/system
not less than 500 microns). The operation shall be
carried out after scrapping and properly cleaning
the surface to remove loose particles with wire
brushes, complete in all respect as per the
direction of Engineerin-Charge.
Item DSR 2023 Amount
Description of Item Quantity Unit Rate
9.03 12.55 Providing and fixing Heat Resistant Terrace Tiles
(300 mm x 300 mm x 20 mm) with SRI (solar
refractive index) > 78, solar reflection > 0.70 and
initial emittance > 0.75 on waterproof and sloped
surface of terrace, laid on 20 mm thick cement
sand mortar in the ratio of 1:4 (1 cement: 4
coarse sand) and grouting the joints with mix of 75.00 Sqm 1703.95 127796
white cement & marble powder in ratio of 1:1,
including rubbing and polishing of the surface
upto 3 cuts complete, induding providing skirting
upto 150 mm height along the parapet walls in the
Total Water Proofing work : 176955 0
10.00 15.0 DISMANTLING AND DEMOLISHING
10.01 15.2 Demolishing cement concrete manually/ by
mechanical means including disposal of material
within 50 metres lead as per direction of Engineer
15.2.1 Nominal concrete 1:3:6 or richer mix (including
equivalent design mix)
10.02 15.3 Demolishing R.C.C. work manually/ by
mechanical means including stacking of steel
bars and disposal of unserviceable material within 2.00 Cum 3551.25 7103
50 metres lead as per direction of Engineer - in-
10.03 15.7 charge.
Demolishing brick work manually/ by mechanical
means including stacking of serviceable material
and disposal of unserviceable material within 50
metres lead as per direction of Engineer-in-
15.7.4 In cement mortar 2.00 Cum 2060.20 4120
10.04 15.12 Dismantling doors, windows and clerestory
windows (steel or wood) shutter including
chowkhats, architrave, holdfasts etc. complete
and stacking within 50 metres lead :
15.12.1 Of area 3 sq. metres and below 13.00 Each 367.20 4774
15.12.2 Of area beyond 3 sq. metres 1.00 Each 502.75 503
10.05 15.19 Dismantling steel work manually/ by mechanical
means in built up sections without dismembering
and stacking within 50 metres lead as per
direction of Engineer-in-charge.
10.06 15.23 Dismantling tile work in floors and roofs laid in
cement mortar including stacking material within
50 metres lead.
15.23.1 For thickness of tiles 10 mm to 25 mm 63.00 Sqm 73.40 4624
10.07 15.56 Dismantling old plaster or skirting raking out joints
and cleaning the surface for plaster including
disposal of rubbish to the dumping ground within
50 metres lead.
10.08 15.27 Demolishing mud phaska in terracing and
disposal of material within 50 metres lead.
10.09 15.60 Disposal of building rubbish / malba / similar
unserviceable, dismantled or waste materials by
mechanical means, including loading,
transporting, unloading to approved municipal 167.00 Cum 263.95 44080
dumping ground or as approved by Engineer-in-
charge, beyond 50 m initial lead, for all leads
including all lifts involved.
Total Dismantling and Demolish work : 156304.90 0.00
SCHEDULE OF QUANTITIES - SANITARY & PLUMBING WORKS
DSR TOTAL TOTAL
NO DESCRIPTION UNIT QUANTITY RATE AMOUNT AMOUNT
2023 DSR (INR)
Supply, Installation, Testing and Commisioning of SINGLE LEVER CONCEALED BASIN
MIXER (WALL MOUNTED) WITH SPOUT (COMPOSITE ONE PIECE BODY)
Supply, Installation, Testing and Commisioning of TABLE TOP BASIN, SIZE:
Supply, Installation, Testing and Commisioing of suitable compatible WASTE COUPLING
32MM- FULL THREAD- WITH CERAMIC CAP-*130MM HEIGHT *65MM CERAMIC CAP
Supply, Installation, Testing and Commisioing of BOTTLE TRAP (WITH INTERNAL
MR 4 PARTITION) 32mm SIZE WITH 300mm & 190mm LONG WALL CONNECTION PIPES & EACH 1 3284.00 3284.00
Supply, Installation, Testing and Commisiong of RIMLESS, BLIND INSTALLATION WALL
MR 5 HUNG WC WITH UF SOFT CLOSE SLIM SEAT COVER, HINGES AND ACCESSORIES EACH 2 15087.00 30174.00
SET, SIZE: 375X520X400 MM
MR 6 Supply, Installation, Testing and Commisiong of PNEUMATIC CONTROL PLATE EACH 2 6641.00 13282.00
Supply, Installation, Testing and Commisiong of ANGULAR STOP COCK WITH WALL
MR 7 FLANGE EACH 2 4823.00 9646.00
Supply, Installation, Testing and Commisiong of CONCEALED STOP COCK WITH
MR 8 ADJUSTABLE WITH WALL FLANGE 15mm EACH 2 4965.00 9930.00
Supply, Installation, Testing and Commisiong of HAND SHOWER (HEALTH FAUCET) WITH
MR 9 8mm DIA 1.2 METER LONG FLEXIBLE TUBE EACH 2 2541.00 5082.00
Supply, HOOK ALD-CHR-573
Installation, Testing andorCommisiong
equivalent of PNEUMATIC SINGLE PIECE SLIM
MR 10 CONCEALED CISTERN BODY WITH INSTALLATION KIT & “S-TYPE” DRAIN PIPE EACH 2 8044.00 16088.00
CONNECTION SET FOR WALL HUNG WC (WITHOUT FLUSH CONTROL PLATE)
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings
17.28 complete.
17.28.2 Flexible pipe
Providing and fixing mirror of superior glass (of approved quality) complete with 6mm thick 1607.95
hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved
13 quality conforming to IS : 8931
18.53.1 15 mm nominal bore EACH 6 574.30 3445.80
Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast
(spun) iron pipes and making good the same with cement concrete 1:3:6 (1 cement: 3 coarse
17.61 sand: 6 graded stone aggregate 12.5 mm nominal size) including necessary plaster and
pointing in cement mortar 1:4 (1 cement : 4 coarse sand) :
18.76 Cutting holes upto 30x30cm in walls including making good the same.
18.76.1 With common burnt clay F.P.S. (non modular) bricks EACH 2 416.80 833.60
Making chases upto 7.5 X 7.5 cm in walls including making good and finishing with matching
surface after housing G.I. pipe etc.
Digitally signed by AMIT
DSR TOTAL TOTAL
NO DESCRIPTION UNIT QUANTITY RATE AMOUNT AMOUNT
2023 DSR (INR)
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for
hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing
18.7 the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one
step CPVC solvent cement and testing of joints complete as per direction of Engineer in
Internal work - Exposed on wall
17 20mm nominal outer dia pipes 335.00 3350.00
18.7.3 25mm nominal outer dia pipes METRE 20 401.55 8031.00
18.7.4 32mm nominal outer dia pipes METRE 2 518.75 1037.50
18.7.5 40mm nominal outer dia pipes METRE 2 702.95 1405.90
18.7.6 50mm nominal outer dia pipes METRE 2 934.15 1868.30
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for
hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe
with clamps at 1.00 m spacing.
18.8 This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of
cutting chases and making good the same including testing of joints complete as per
direction of Engineer in Charge.
Concealed work including cutting chases and making good the walls etc.,
18.8.1 15mm nominal outer dia pipes METRE 20 497.80 9956.00
18.8.2 20mm nominal outer dia pipes METRE 10 537.60 5376.00
18.8.3 25mm nominal outer dia pipes METRE 5 627.25 3136.25
18.8.4 32mm nominal outer dia pipes METRE 5 739.30 3696.50
18.51 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS
19 standards and weighing not less than 690 gms.
18.51.1 15 mm nominal bore EACH 1 798.95 798.95
Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes for
soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all
neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or
without doors), reducers, WC connectors, couplers, expansion joints / bellows, cowels,
clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp &
hangers etc. in concealed / inside duct / under floor & basement ceiling / external work etc.
including chase cutting as required, excavation and back filling in all kind of soils, suspended
from floor under false ceiling or embedding the pipes laid under floors / building in 75 mm.
20 alround 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm
nominal size) including cost of shuttering for proper completion of the work, breaking and
making good the walls and floors etc. after pipes have been duly laid and tested. The rubber
ring shall confirm to IS:5382.
The Pipes will be supported with threaded G I rods & U clamps with nuts, washers etc on
50x50x5 mm slotted angle. The cost will include all support arrangements. The work includes
commissioning of all pipes lines as per drawings and specifications and as directed by engg-
in-charge at site.
a 110 mm dia (Wall Thickness - 3.2 to 3.8 mm) METRE 20.00 536.00 10720.00
b 75 mm dia (Wall Thickness - 3.2 to 3.8 mm) METRE 5.00 416.00 2080.00
Digitally signed by AMIT
DSR TOTAL TOTAL
NO DESCRIPTION UNIT QUANTITY RATE AMOUNT AMOUNT
2023 DSR (INR)
Providing, fixing, jointing and testing in position ISI marked (IS:4985) UPVC pipes of min 6
Kg/ Sqcm rating with fitting for waste pipe from fixtures to floor trap including reduces,
enlarger, socket, couplers, bends, tees etc including fixing at wall/ ceiling level supported by
MR 21 clamp & hangers etc. cutting holes in wall/ floors/ slabs and making good the same with
cement concrete 1:2:4 complete as required.
Providing & fixing UPVC Floor trap of self cleansing design with stainless steel grating
MR 22 complete in all respects.
Plain Floor Trap (4" Ht) with 50 / 75 outlet and with height raiser EACH 4 536.00 2144.00
MR 23 Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor traps. EACH 4 726.00 2904.00
Providing & fixing of SS Floor Cleanout, round or square with rubber seal and flat round
cover with screws and other required fitting complete as required.
Supply, Installation, Testing and Commisiong of HIGH FLOW SINGLE LEVER
MR 27 CONCEALED DIVERTOR FOR BATH & SHOWER EACH 1 18938.00 18938.00
Supply, Installation, Testing and Commisiong of SPOUT FOR BUILT IN BATH/SHOWER
Supply, Installation, Testing and Commisiong of OVERHEAD SHOWER 350x350MM
MR 29 ROUND EDGE SQUARE HEAD SINGLE FLOW (BODY & FACE PLATE STAINLESS EACH 1 24100.00 24100.00
STEEL WITH CHROME PLATED) WITH RUBIT CLEANING SYSTEM
MR 30 Supply, Installation, Testing and Commissioning of 15 litre geyser EACH 2 12004.00 24008.00
MR 31 Supply, Installation, Testing and Commisiong of SOAP DISH HOLDER EACH 1 4392.00 4392.00
MR 32 Supply, Installation, Testing and Commisiong of TUMBLER HOLDER EACH 1 4309.00 4309.00
Supply, Installation, Testing and Commisiong of TOWEL RACK 600MM LONG WITH
MR 33 LOWER HANGER
MR 34 Supply, Installation, Testing and Commisiong of ROBE HOOK EACH 1 2045.00 2045.00
MR 35 Supply, Installation, Testing and Commisiong of TOILET ROLL HOLDER WITH COVER EACH 1 4978.00 4978.00
MR 36 Supply, Installation, Testing and Commisiong of TOWEL HOLDER EACH 1 3336.00 3336.00
17.10 37 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and
17.10.1 stainless steelwith
Kitchen Sink plug 40 mm,
Drain including painting of fittings and brackets, cutting and making good the walls
Digitally signed by AMIT
SCHEDULE OF QUANTITIES - ELECTRICAL WORKS
DSR NO DESCRIPTION
S NO UNIT QUANTITY RATE AMOUNT AMOUNT
2023 DSR (INR)
A POINT WIRING
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC
insulated copper conductor single core cable in surface / recessed medium class PVC
1.10 conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5
sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.
Wiring for group controlled (looped) light point/ fan point/call bell point (without independent
switch etc.) with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in
1.55 surface / recessed PVC conduit, and earthing the point with 1.5 sq.mm. FRLS PVC insulated
copper conductor single core cable etc as required.
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single
A.3 1.12 core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FRLS Metre 520 334.00 173680.00
PVC insulated copper conductor single core cable for loop earthing as required.
Supplying and fixing following modular switch/ socket on the existing modular plate & switch
1.24 box including connections but excluding modular plate etc. as required.
1.24.4 3 pin 5/6 amp socket outlet Each 17 122.00 2074.00
1.24.5 6 pin 15/16 amp socket outlet Each 12 197.00 2364.00
Supplying and fixing modular blanking plate on the existing modular plate & switch box
A.6 1.26 excluding modular plate as required. Each 20 40.00 800.00
Supplying and fixing following size/module, GI box along with Modular base & cover plate on
existing modular metal boxes etc. as required.
B SUBMAIN AND CONTROL WIRING
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC
1.14 insulated copper conductor, single core cable in surface/ recessed medium class PVC
conduit as required
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
1.14.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Metre 120 275.00 33000.00
1.14.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Metre 20 334.00 6680.00
Digitally signed by AMIT
DSR NO DESCRIPTION
S NO UNIT QUANTITY RATE AMOUNT AMOUNT
2023 DSR (INR)
1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 5 439.00 2195.00
1.14.10 4 X 10 sq. mm + 2 X 6 sq. mm earth wire Metre 20 1005.00 20100.00
1.14.11 4 X 16 sq. mm + 2 X 6 sq. mm earth wire Metre 10 1365.00 13650.00
Supplying and making end termination with brass compression gland and aluminium lugs for
9.1 following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1
C.1 KV grade as required.
Supply of following XPLE armourned 1.1 KV grade conforming to I.S.7098/1554Aluminium
Conductor Cables :
MR Supply of following sizes of PVC sheathed PVC/XLPE insulated Aluminium conductor
armoured cable of 1.1 KV grade conforming to IS:7098 part-1 / IS:1554 part-1 respectively &
(a) 3.5 C x 35 Sqmm XLPE cable RM 10 378.00 3780.00
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit
2.10 breaker suitable for inductive load of following poles in the existing MCB DB complete with
D.2 connections, testing and commissioning etc. as required.
2.10.1 Single pole Each 30 256.00 7680.00
Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB
D.3 complete with connections, testing and commissioning etc. as required.
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB
distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral
D.4 bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as
required. (But without MCB/ RCCB/ Isolator)
Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts,
2.14 residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in
D.5 the existing MCB DB complete with connections, testing and commissioning etc. as required.
FIXTURES AND FITTINGS
1 1.24.6 Telephone socket outlet Set 1 148.00 148.00
2 1.24.7 TV socket outlet Set 3 148.00 444.00
Supplying and drawing following pair, 0.5 sq.mm FR PVC insulated copper conductor,
1.18.2 unarmoured telephone cable in the existing surface / recessed steel / PVC conduit as
Digitally signed by AMIT
DSR NO DESCRIPTION
S NO UNIT QUANTITY RATE AMOUNT AMOUNT
2023 DSR (INR)
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE
insulated, shielded with fine tinned copper braid and protected with PVC sheath in the
4 1.19 exisitng surface/recessed steel/ PVC conduit as required MTR 60 47.00 2820.00
Supplying and fixing of following sizes medium class PVC conduit aong with accessories in
surface/ recess including cutting the wall and making good the same incase of recessed
5 conduit as required
6 MR Supply, Installation, testing and Commissioning of LED Tubelight 1200mm 20W Each 5 800.00 4000.00
7 MR Supply, Installation, testing and Commissioning of LED Bracket Light 15W Each 13 1500.00 19500.00
Supplying and fixing two module stepped type electronic fan regulator on the existing
8 1.25 modular plate switch box including connections but excluding modular plate etc. as required. Each 5 369.00 1845.00
Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes
containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including
connections etc. as required.
Installation, testing and commissioning of ceiling fan including wiring the down rods of
standard lenght (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single
10 1.45 core cable including providing and fixing phenolic sheet cover on the fan box as required etc Nos. 5 339.00 1695.00
Installation of exhaust fan in the existing opening, including making good the damage,
1.50.1 connection, testing, commissioning etc. as required.
Upto 450 mm sweep Nos. 3 450.00 1350.00
12 1.51 Extra for fixing the louvers/ shutters complete with frame for exhaust fan of all sizes. Nos. 3 207.00 621.00
Supply of ISI marked energy efficient exhaust fan plastic ideal for mounting on glass window
13 MR with 200mm sweep Each 3 1800.00 5400.00
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling
fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm
long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not
less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350
14 19.1 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator Each 5 2730.00 13650.00
unit for speed control and all remaining accessories including safety pin, nut bolts, washers,
temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable
for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.
Total of Electrical items 369813.00 32680.00
Digitally signed by AMIT
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
NIT AICL.pdf
Tender Document
BoQ Combined.pdf
Tender Document
SCC AICL.pdf
Tender Document
GCC upto amend6.pdf
Tender Document
Instruction to Bidder for online Bid Submission.pdf
Tender Document
Forms.pdf
Tender Document
LIST OF MAKE.pdf
Tender Document
TECHNICAL Circular upto 27 amendment.pdf
Tender Document
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].