SPECIAL REPAIRS TO BUILDING NO.P-151 AND PROVISION OF CERTAIN MINOR WORKS AT AIR FORCE STATION YELAHANKA

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Roughening surface of old concrete floor by picking, sweeping, clean and washing down with water to remove dust etc and brushing neat cement slurry with 3kg of cement per sqm

Demolition of cement concrete in ground floor and pavings nexc 15cm thickness (below or above ground level).

Demolition of brick work or stone masonry built in CM incl all quions all as specified

Demolition of cement concrete in ground floor and pavings RCC in any description and in any position.

M&L for Vitrified tiles of 10mm thick and area of each tiles not exceeding 0.36 Sqm for flooring over 15 mm thick screed bed in CM 1:6 all as specified and directed.

M&L for Vitrified tiles of 10mm thick and area of each tiles not exceeding 0.36 Sqm as in skirting over 10 mm thick rendering in CM 1:4 dado/skirting finished all as specified and directed.

M&L for Glazed coloued Ceramic tiles of size 350X250X7mm/450X350X7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match as in skirting/dado over 10 mm thick screed bed in CM 1:4 finished all as specified and directed in toilets ang kitchen.

M&L for Non skid coloured Ceramic tiles 7 to 8 mm thick and area of each tiles not exceeding 0.18 Sqm as in flooring over 15mm thick screed bed in CM 1:6 all as specified and directed.

M&L for Granite(of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishingtypes over 20mm thick screed bed in CM 1:6 all as specified and directed.

Rounding to edges of granite slabs one edge, such as in steps, cooking platform, and other similar situations all as specified and directed.

M&L for 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finish complete all as specified and as directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and treating the surface with beeswax polishing complete all as specified and as directed.

M&L Light shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, all as specified and directed.

Taking up or down 15mm steel tubing and connections all as specified and directed.

All as per item No.15 here-in-before but 20mm bore

S&F 20 mm dia of CPVC pipes SDR 11 fittings on walls / ceiling or laying in floors complete all as specified.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white premium quality (excluding fixing bolts, flushing cistern and flush pipe) all as specified and directed.

S&F plastic pedestal pattern seat cover with flat bottom and cover and MS chormium plated hanging type device all as specified and directed.

S&F in repairs 10 litre capacity PVC syphonic action type for low level flushing cistern including all fittings and including flushing pipe fixed in repair all as specified and as directed.

S&F in repairs vitreous china wash basin, white or coloured of size 550 x 400 mm with padestal including brackets all as specified and as directed .

S&F in repair Bib taps chromium plated 15 mm with fancy type with capstan head handle screwed both ends for iron pipe or for union complete all as specified.

S&F 15 mm dia two way bib taps (fancy type), cast copper alloy with with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete with check nut 15mm bore complete all as specified and directed by Engr-in-Charge. Make:Cera Model F3002152 or its techno commercially equivalent.

S&F 15mm dia angle valves, cast copper alloy, CP, screwed down, high pre-ssure, with crutch, screwed both ends for iron pipe or for unions and fixed in repair.

Supply and fixed PVC Cabinet mirror all as specified .

Supply and Fixing in repairs PVC connection 15mm size with PTMT Nut of length 600mm etc complete all as specified and as directed .

S& F in repair Brass chromium plated shower rose 125mm with swivel joints including fixing to steel pipe or union of 15mm bore all as specified and directed at site.

S & F in repaiers CP Shower arm 15 mm size, 195 mm long with bend of 45 degree with flange as specified and as directed.

S&Fin repair CP towel rail 600 mm long fixed with chromium plated brass screws and wooden /plastic cleats fixed in repairs.

S & F cornor glass shelf with assy of CP and fixed with Chromium plated brass screws and wooden/plastic cleats, as specified and as directed.

S & F in repair CP Towel ring of fixed with and including Chromium plated brass screws and wooden/plastic cleats, as specified and as directed.

S&F in repair Towel Rack with lower hanger (stainless steel), fixed in repairs, complete all as specified and directed. Make : Jaquar ( Code No AHS-CHR 1581H) or its techno commercially equivalent.

S&F in repair Paper holder with Flap Recessed Type (Stainless steel), in repairs, all as spd and directed by Engr-in-Charge. Make : Jaquar (Code No AQN-CHR-7753) or its techno commercially equivalent.

S&F in repairs central hole Basin mixer 15 mm dia Fancy type. Make: Cera model F-2008461 or its techno commercially equivalent.

S&F in repairs Wall mixer non telephonic Shower arrangement with connecting legs & Wall flanges complete all as specified and as directed. Make :Jaquar Cat Part No - CON-219KN or its techno commercially equivalent.

S&F in repairs Glass shelf wash hand basinof cera make including neccessary holding arrangements with screws etc all as specified and directed by the Engineer -in -charge.

S&F in repairs stainless steel Soap dish fix to wall all as directed and specified.

S&F in repairs 32mm waste pipe for wash hand basin all as specified and as directed

S&F in repairs PVC floor trap 110mm dia, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and as directed.

S&F in repairs PVC(SWR) floor trap 75mm dia, with grating including jointing to waste pipe fixed in solvent cement complete all as specified and as directed.

S&F in repairs PVC(SWR) Pipe s 110mm dia single soketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F in repairsPVC (SWR) pipes 75 mm single socketed, in any length with rubber ring joints, laid in trenches or in floors.

S&F in repairs PVC (SWR) bends 75 mm dia in any radius with access etc.

S&F in repairs PVC (SWR) 75mm dia junction (single 'T') equal or unequal with access door etc.

S&F in repairs PVC (SWR) branch piece single (single 'Y') equal or unequal with access door including creating necessary provn in the existing PVC waste inlcuding jointing with rubber washer and solvent clamps etc.

S&F in repairs brass CP Health faucet with 1.20m long flexible pipe and wall hook complete all as specified and directed.

Taking down cement plaster from walls of any description all as specified and directed.

M&L for brick work with sub class 'B' bricks , straight or curved on plan exc.6 m mean radius built in CM 1:6 complete all as specified and directed.

M&L for brick work with sub class 'B' bricks , straight or curved on plan to any radius built in CM 1:4 in half brick thick complete all as specified and directed.

M&L for 10mm thick cement plastering in CM 1:6 on internal walls of brick work or concrete, finished even and smooth without using extra cement complete all as specified and as directed.

M&L fo 15mm thick cement plaster in CM 1:4 on external wall of brick work or concrete,finished even and smooth without using extra cement complete all as specified and as directed.

M&L for hard core of guage 63mm deposited, spread and levelled to a true surface complete all as specified and as directed.

M&L for 75 mm thick cement concrete 1:2:4,type B-2 using 40 mm graded aggregate for plinth protection .

M&L 70mm thick PCC type B-1, 1:2:4 (using 20 mm graded aggregate) as in sub base floor, finished of concrete even and smooth using extra cement, Complete all as specified and directed.

M&L for forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘B’ complete all as specified and as directed.

Taking down door chowkats or frames not exceeding 1.5 sqm with shutters (without taking off shutters from the frame) of any description

All as per item No 57 above but exceeding 1.5 sqm but not exceeding 4 sqm

M&L for taking down shuttes of any description exc 1 Sqm and n.exc 2 Sqm, cupboard shutters all as specified and directed.

M&L for taking down shuttes of any description and refixing in the same opening all as specified and directed.

Cutting holes in brick/stone walls built in CM for inserting hold fast and making good dismantled portion in CM 1:3 or PCC 1:2:4 (type B 0 ) using 12.5 mm graded aggregate ¸depth of embedded portion of hold fast not exceeding half brick

Cutting holes in brick/stone wall for inserting holdfast and making good dismantled portion in CM 1:3 or PCC 1:2:4 type -B0 (using 12.5mm graded aggregate depth of embedded portion of holdfast exc half brick but n exc one brick all as specified and directed.

M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet all as specified and directed.

M&L Factory Made Solid PVC Moulded Door Shutter, with particle board core 28 to 30 mm thick (stiles),with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face including neccessary fitiings etc complete as specified and directed.

S&F powder coated anodised aluminium frame and shutters with all fixing arrangements for doors, windows and ventilators with one or more rebates including joing cleat for fixing etc aluminium section of powder coating not less than 50 micron all as specified and directed.

S&F powder coated aluminium door/Windows/ventiliator shutters aluminium section weighing 0.55kg/m including necessary joining, fixed type, cleats, glazing clips, rubber neoprene packing, roller in each window, anodised alumnium snap beading, screw etc, complete all as spd.

S&F IInd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified and directed.

S&F Continuous(piano) hinges,mild steel,bright finish of electrogalvanised 30 mm width of flap.

S&F in repair Prelaminated particle board,19 mm thick interior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws to timber frame work.

Cover fillets of standard 4.5 mm thick ness hard board, 40mm wide,and fixing with screws.

S&F 300 mm ordinary rat rail rod pattern springs incl roller and roller plate complete.

S&F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides

S&F flush door 30mm thick membrane doors decorative finish on one side duly finished and polished and other side all as per manufacturers directions as per tint / colour including necessary teak wood lippings of necessary all as directed by Engr - In Charge. (Note; manufacture MAXON,)

S&F 35mm thick 2 nd class Hard wood Glazed and Skelton shutters, open rebated and prepared to receive glass, gauze etc divided into squares,with plain,chamfered or rounded,mitred and rebated sash bars,any numbers.edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 and fitted to chowkats.

M&L for 40mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated

S&F Butt hinges of size 100mm extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type C-21 all as specified and directed.

S&F aluminium alloy anodised, sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheets , cast or extracted section and fixing bolt and sliding bolts of extracted section.

S&F 200mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S&F Aluminum anodised barrel tower bolt of size 200mm

S&F aluminium anodised, barrel tower bolt 150mm of extruded section.

S&F aluminium handle 150mm cast type anodised.

S&F extruded aluminum alloy handles fabricated anodised size of handle 150mm

S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor 150 mm size of cover plate.

S&F 100mm size mild steel butt hinge medium weight all as specified.

S&F sheet glass ordinary quality 5mm thick as in doors,window, showcase alum frame work & similar work with or without glass roller any size including neoprime gasket all as directed by Engineer-in-Charge

All as item 85 above but figured glass pin head type.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width or aperture 1.40 mm all as specified and directed. Note : Rate quoted by the contractor is inclusive of rate for fixing of wire cloth in steel& wooden windows/ventilators with MS flat from 15 x 3mm and fixing of wire cloth in wooden shutters with 2nd class hard wood beading all as specified and directed .

S&F MS work as in framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framedguard bars; barred iron doors;ladders; framed balusters; walkways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

S&F in repairs aluminium powder coated drapery rod 32mm dia including suitable fancy type brackets on both ends fixed over 1st class hard wood rounded wooden blocks of 65mm dia and 20mm thick fixed to stone wall/Brick wall using screws including necesary drilling & finished with polishing ,each opening shall have two fillets at both ends complete all as specified and as directed.

S&F aluminium powder coated fancy type suitablre brackets fixed at both ends of openings fixed over 1st class hard wood rounded wooden blocks 0f 65mm dia and 20mm thick fixed to stone wall/Brick wall using screws incl necesary drilling & finished with polishing Each opening shall have two fillets at both ends.

M&L for Keyed pointing in Cement mortar 1:4 to random or polygonal rubble complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

S&F stainless steel (Grade 304) railing with 50 mm dia pipe railing at top supporting with 40mm dia vertical pole @900 mm centre to centre and 20mm dia pipe as horizontal members in three lines complete all as specified and as direcated.

M&L for preparing the old painted surfaces of wall, washing, rubbing down and stopping of distempered surfaces on walls, removing nails making good holes cracks and filling wall care putty etc and applying one coat of oil bound distemper all as specified and as directed.

M&L for Complete removal of existing surface finish and applying two coat of OBD over 1-2 mm thick wall care putty all as specified and directed

M&L for preparation of surface and applying two coat of White wash on old wall surface all as specified and directed.

M&L for Complete removal of existing surface finish and applying over one coat of OBD in ceiling all as specified and directed

M&L Preparing old painted wooden surface and applying one coat of Synthetic enamel Painting to wooden surface all as specified and directed.

M&L Preparing old painted steel surface and applying one coat of Synthetic enamel Painting to steel surface all as specified and directed.

M&L Preparing new steel surfaces of any description and applying two coat of Synthetic enamel Paint over one coat of primer to steel surface all as specified and directed.

M&L for Preparing the new surfaces of wall and applying two coat of oil bond distemper over a coat of interior wall care putty all as specified and as directed

M&L for preparation of the old surfaces unplastred of wall complete removal of existing treatment applying two coat of cement base paint ,complete all as specified and as directed.

M&L for prepration of new plastred surfaces of wall applying two coat of oil emulsion distemper over a coat of alkali resistant cement primer complete all as specified and directed. .

Preparing the old painted surfaces of wall, washing, rubbing down and stopping of distempered surfaces on walls, removing nails making good holes cracks and filling wall care putty etc and applying one coat of oil bound distemper all as specified and as directed.

M&L for preparation of new or previously untreated wooden surfaces over 10 cm in width or girth and applying two coats of synthatic enamel paint over one coat of pink primer

M&L preparing new or previously untreated wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc., all as specified and as directed.

M & L for painting and servicing of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust, painting of MES No by black paint etc all as specified and directed.

Point wiring completed with 1.5 sqmm single core PVC insulated heavy duty ISI Marked unsheathed copper conductor cable 1100 volts grade with multistranded copper conductor drawn through concealed PVC conduit and including provision of PVC Insulated heavy duty ISI marked Unsheathed copper conductor,1.5 sqmm for earth continuity conductor and connected to common earth dolly, including suitable size of sheet metal box 1.6mm thick fixed and flushed inside the walls, with 3mm thick laminated sheet top cover for housing the switches, socket outlets, fan regulators etc., for the following: -

One light /Exhaust Fan point controlled by one switch.

One ceiling fan controlled by one 5 Amps switch

All as per item No 4 above but one Bell Point controlled by one Bell Push

One switch socket outlet point 3 pin 5 Amps on Independent board.

One switch socket outlet point 3 pin 5 Amps on same board with other switches.

All as per item No. 4 above but wiring with 2.5 sq mm FRLS copper cable including earth continuty conductor with 2.5 sqmm FRLS copper cable for 3 pin 15 Amps socket outlet on independent board controlled by 15 Amps switch.

Supply and fix switch piano 5 Amps flush type one way.

Supply and fix socket outlet 5 pin 5 Amps multi pin flush type

Supply and fixing of 5 Amps Switch socket combination 5 Pin.

Supply and fix switch socket combination 3 Pin, 16 Amps multipin flush type.

Supply and fix ceiling rose surface bakelite 65x50mm 3 terminals.

Suply and fix Bell Push flush type.

Supply and fix Bell ding dong type AC 230 V complete.

Supply and fix fan speed regulator, electronic step type, suitable for single phase AC, 240 volts, 50 Hz, 100 watts all as specified and as directed.

Supply and fixing PVC Round block for mounting tubelight fitting etc.

Supply and fix in repair LED lights fitting 20 Watt, 220V, 4 feet long, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair LED light fitting (mirror light) with high out put diffuser, 2 feet long, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size and two round block for mounting tubelight fittings including dismantling old unsv fitting complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair round shape 15 watt 220 volts AC recessed/surface type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair LED, Tube light fitting 12 Watt, 2 feet long, 6500K self blasted LED batten, extruded thermoplastic body with PC diffuser in square shape CRI>80, beam angle 120 degree, surface mounted high and two round block for mounting tubelight fittings all as specified and directed by Engr-in-Charge. Make: Polycab Cat No:LDO0103028 or its techno commercially Equivalent.

Supply and fix in repair building security light LED street light fitting 20 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed by Engr-in-Charge. Make Crompton Cat No LST-20-CDL or its techno commercially Equivalent.

M&L for sub-main wiring with two runs of 4 sqmm unsheathed PVC insulated, single core heavy duty ISI Marked FRLS cable 1100 volts grade with multistranded copper conductor drawn through and including not less than 25mm dia non metallic rigid PVC white conduit/casing caping and conduit accesories concealed/fixed to wall/roof/floor and including suitable PVC conduit with 4 sqmm copper earth wire after taking out the existing sub-main wiring, making good to the distrubed surfaces also matching the existing surfaces all as specified and directed by Engr-in-Charge. Note: 2 runs of cable and one run earth wire and conduit will be measured as one length. Three run of 4 Sq mm and PVC conduct is measured as one Run or one Meter.

M&L for sub-main wiring with two runs of 1.5 sqmm unsheathed PVC insulated, single core heavy duty ISI Marked FRLS cable 1100 volts grade with multistranded copper conductor drawn through and including not less than 20mm dia non metallic rigid PVC white conduit/casing caping and conduit accesories concealed/fixed to wall/roof/floor and including suitable PVC conduit with 1.5 sqmm copper earth wire after taking out the existing sub-main wiring, making good to the distrubed surfaces also matching the existing surfaces all as specified and directed by Engr-in-Charge. Note: 2 runs of cable and one run earth wire and conduit will be measured as one length. Three run of 4 Sq mm and PVC conduct is measured as one Run or one Meter.

Supply and fix new exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed by Engr-in-Charge.

M & L for provision of hole on the wall for fixing of the exhaust fan and connecting with the ceiling rose complete all as specified and directed by Engr-in-Charge.

M & L for Earthing complete with galvanised earth plate electrode of size 600x600x6 mm thick burried directly in ground earth pit not less than 2.25 m below ground level with top edge of earth plate not less than 1.5 mtrs below ground level connected to 4 mm dia GI earth wire as earth lead upto a length of 7.5 metre long by means of bolts,nuts, washers etc. and protected by GI pipe light grade 15mm dia and 20mm dia GI tubing light grade with funnel for watering, all as shown in electrical plate No 3 of SSR Part-I, back-fill with salt and charcoal, provision of test point including connected to earth test point and necessary earth work excavation in any type of soil PCC (1:3:6) type C1 bed and chamber RCC (1:2:4) type B1, iron grill including GI cover with hinge and funnel watering pipe etc all as specified and directed by Engr-in-Charge.

S S BUILDERS

shri veerabadreshwara enterprises

OM INFRA

Lakkaiah Rangaswamy

Vinayaka Enterprises

S R Trading Co

ANAND REFRIGERATION

RRK PROJECTS

JyothsnaNursery

GOVINDARAJU INTERIOR DECORATION