Constr of Community Hall

Consrtr of Community Hall

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in- charge. Ordinary rock

Boulder with minimum size of 300mm for pitching at the base

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

Reinforcement of RCC work including bending, binding and placing in position complete.(b) Mild twisted bars.

Centering and shuttering i/c strutting propping etc. and removal of form work for.(b)Columns,pillers and pires

Reinforced concrete work in foundations, footings, bases of columns etc.and mass concrete excluding cost of centring, shuttering and reinforcement in :a) M20 (1 cement:1.5 coarse sand:3 stone aggregate 20 mm nominal size)

Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface buta) M20 (1 cement:1.5 coarse sand:3 stone aggregate 20 mm nominal

Steel work in single section i/c cutting hoisting, fixing in position & applying & priming coat of reda) In flats upto 10mm in thickness.

Providing & fixing M.S. Round holding down bolts with nuts and washer plates etc. complete.

Providing wood work in frames of false ceiling, partitions and trusses etc. sawn and fixed in position with necessary stainless steel screws etc Kiln seasoned and chemically treated hollock wood

25 mm wooden planking, tongued and grooved in flooring, including fixing with iron screws complete with

Providing and fixing plain jaffri of 35x10 mm laths placed 35 mm apart (frames to be paid separately), including fixing 50x12 mm beading complete with : Second class teak wood

Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows andclerestory windows including necessary iron butt hinges with necessary screws.a) Kiln seasoned and chemically treated hollock wood: 35 mm thick shutters

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Kiln seasoned and chemically treated hollock wood (a) 35 mm thick

Providing corrrugated G.I. Sheet, roofing fixed with galvanised Iron 'J' or 'L' hooks, bolts & nuts 8mm dia with bitumen and G.I. Limpet washers or with G.I. Limpet washers filled with white lead complete excluding the coat of purline, refters and truses (a) 0.63 mm thick G.I. Sheet.

Providing ridges or hips 60 cm. over all in plain G.I. sheet fixed with galvanised iron 'J' or 'L' hooks bolts and nuts 8 mm dia G.I. limpet & Bitumens washers complete

Providing and fixing insulating board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately) : Flame retardant face insulating board

Providing and fixing wooden moulded beading with iron screws, plugs and priming coat etc. complete for ceiling. Kiln seasoned and chemically treated hollock wood (50x12 mm)

Providing and fixing Aluminium tower bolts anodised or transperent or dyed to requred colour or shade withnecessary screws etc complete.(a) 250 x 10 mm

Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-in-charge (a) 100 mm

Providing and fixing bright finished brass hard drawn hooks and eyes :(a) 300 mm

Providing & fixing 2.50 cm thick approved local wood eaves boards 23 cm wide with necessarymouldings etc.

Applying priming coat With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood

Painting with aluminium paint of approved brand and manufacture to give an even shade . Two coats on new work

Carriage of Materials

LALIT DOLEY (BID ID -3123147)

Bishing Enterprises (BID ID -3123214)