Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.0 LAccepted-AOC | L1 | Accepted-AOC BEING L1 | |
| 2 | L2₹24.1 L+₹1.5 L (6.63%)Rejected-Finance B 56 LANE NO 4A SECTOR 7 VASHNAVI ENCLAVE CHANNI HIMAT JAMMU 180015 | JAMMU | JAMMU AND KASHMIR | 180015 | L2 | Rejected-Finance BEING L2 | |
| 3 | L3₹25.6 L+₹3.0 L (13.1%)Rejected-Finance SUBASH NAGAR W NO 5 H NO 354 BEHIND SBI UDHAMPUR J K 182101 | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L3 | Rejected-Finance BEING L3 |
Tender Value
Refer Docs
EMD Value
₹50,000
Closing Date
9 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) UDHAMPUR
GE (AF) UDHAMPUR
WELCOME MAINT TO OMQ AND OTHER B/R REPAIR WORKS AT AIR FORCE STATION UDHAMPUR (GE/AFU-17/2023-24)
2023_MES_595050_1
GE/AFU-17/2023-24
Open Tender
Civil Works
Item Rate
270 days
GE AF STN UDHAMPUR
REFER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
₹50,000
Yes
22 Jun 2023
12 May 2023
12 Jun 2023
12 May 2023
9 Jun 2023
26 May 2023
Amount
Taking down cement plaster, any description on brick, concrete or stone walls or ceiling including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off all as specified and directed.
Taking down shutters of any description exc. 1 sqm and n.exc 2 sqm each and removing from site.
Taking down chowkats or frames with shutters without taking off shutters from the frames, area n.exc 1.50 sqm each and removal to store including cutting holes for removal of hold fast complete all as specified.
Taking down chowkats or frames with shutters without taking off shutters from the frames, area exc 1.50 sqm but n exc 4 sqm each and removal to store including cutting holes for removal of hold fast complete all as specified.
Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. and removing from site all as specified and directed.
Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing.
Taking up or down steel tubing & connections, incl cleaning for refixing etc for 15mm dia pipe.
-ditto-but 20mm dia pipe.
Dismantling boarding any description fixed in any position with nails / screws complete all as spfd.
Taking down shutters of any description from the frames and refixing in the same opening after repair of door resecuring or easing & adjusting etc , area n.exc 2.00 sqm each complete all as specified
Demolition of cement concrete reinforced (reinforement cut as required to facilitate demolition) roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work and removing form site all as specified and directed.
Demolition of cement concrete unreinforced roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work and removing form site all as specified and directed.
M&L for anti-termite treatment of soil under existing floors using emulsion @1 litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar (1:2) to match the existing floors complete all as specified and as directed.
M&L for anti-termite treatment for points of contract of wood work by chemcial emulsion (in oil kerosene based solution) @0.5 litre per hole drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and as directed.
Brick work with sub class 'B" old size bricks straight or curved of onplan to any radius in half brick thick walls built in CM 1:6 complete all as spfd.
Brickwork with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as spfd.
M&L rendering 15mm thick CM 1:6 on fair faces of brickwork or concrete surfaces finished even & smooth w/o using extra cement.
M&L rendering 15mm thick CM 1:4 on fair faces of brickwork or concrete surfaces finished even & smooth w/o using extra cement.
-ditto- but 5 mm thick in CM 1:3 as in ceiling.
M&L for Preparation of Newly/previously old plastered surfaces of wall and applying 3mm thk Wall care putty (to be applied in two coats) complete all as specified and as directed
M&L for preparation of old surface of wall of any description and applying one coats of oil bound distemper including filling putty or white cement to holes, cracks and uneven surfaces etc as required and making good approved by Engr-in-Charge complete all as spfd.
M&L for preparation of old surface of ceiling of any description and applying one coats of white wash by filling putty or white cement to holes, cracks and uneven surfaces etc as required and making good approved by Engr-in-Charge complete all as spfd.
All as per item No 21 above but two coat of Oil Bound distemper on walls complete all as specified and as directed.
All as per item No 22 above but one coat of white wash on walls complete all as specified and as directed.
All as per item No 24 but 02 coat of white wash on ceiling complete all as specified and as directed.
M&L for preparation of old painted wood or wooden based surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed
M&L for preparation of old painted steel or steel based surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed
M&L including preparation of impression type texture painting complete internally on wall incl preparation of surface complete all as specified and directed by Engr in Charge.
S&F pressed steel frames of size 105x60 mm for doors with one or move rebates including necessary fixing lugs, hinges, lock, strike plates etc complete as as specified .
S&F pressed steel frames of size 125x60 mm for doors with one or move rebates including necessary fixing lugs, hinges, lock, strike plates etc complete as as specified .
Supply and fixing in repair Flush shutters 30 mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides including mouldings fixed to chowkats, complete all as specified.
Supply and fixing 2nd class hardwood 35 mm thick factory made glazed and skelton shutters to receive glass/ gauge of with sash bars for windows/ventilators fixed in position complete all as specified in SSR Part-I Sec 8 clause 8.20(B) complete all as specified.
S&F Factory made PVC single door frame of size 50x47mm with a wall thickness of 5mm plain colour sheet reinforced with 19mm x 19mm MS square tube having wall thickness 19 gauge complete . The door frame to be fixed to the wall using MS screw 75mm long with PVC fastener complete as per manufacturing, instruction complete all as specified.
S&F factory made solid PVC door shutter 30mm thick (style) consisting of frame made out of MS tube 19mm x 19mm having wall thickness 19 gauge for stiles MS tube 15mm x 15mm having wall thickness for top and bottom rails MS frame shall be covered with 5mm thick heat moulded plain colour PVC ‘C’ channel having 5mm thick PVC sheet strip 20mm wide struck inside with solvent cement for stiles and 5mm thick PVC sheet for top rail, lock rail and bottom rail on either side and 10mm (5mmx2mm) thick, 20mm wide cross PVC sheet as gap insert for top and bottom rail Paneling of 5mm thick plain colour PVC sheet to be fixed in MS frame welded/sealed to the stiles and rails with 5mm x 30mm PVC sheet beading and jointed together with solvent cement complete . Each PVC door shutter leaf consists of 3 Nos 100 mm long MS butt hinges complete all as specified.
S&F Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified.
S&F factory made mild steel ventilators box type with upper top hung shutters and bottom fixed type shutters including pintol hinges,steel peg stay and one shop coat of red oxide primer incl taking down old, complete all specified and as directed. Note : i) The ventilator shall be fabricated as per Drg No CEUZ/TD/1302/2009 Sheet 1/3 to 3/3 ii) Glazing, wire gauge shall be measured and paid separately.
M&L for factory made 1.25mm thick mild steel window (Box type)(primer coated) ERW hollow P-section of size 60mm x 25mm incl. grills using 10sqm bar double rebated both gauge and glass shutter comprised gauged glazed skelton shutter of ERW section 50mm x 20mm and 1.0mm thick with two openable leafs having two Nos sash bar of T- section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 60mm x 25mm and 1.25mm thick incl. cutting holes and making good dismantled portion in PCC (1:2:4) type B-1 four Nos for each window incl. following fittings welded to frame shutter complete all as specified and directed :- (a) Hold fast, 150mm long of flat iron 12mm x 3mm made to shape 04 Nos per window. (b) handle of Z- section 20mm x 25mm, 100mm long 01No per leaf. (c) stainless steel tower bolt 150mm long 02 Nos per leaf . (d) Z- section 20mm x 25mm, 100mm long stopper 01No per leaf. (e) Cleat 55mm long of hollow square 15mm x 20mm x 63mm welded to hinge 01 No per leaf. (f) MS pintal hinge of size 75mm x 12mm 02 Nos per leaf incl stainless steel wire cloth, .25mm to .36mm nominal dia of wire & average width of aperture 1.40mm to 2mm & fixed with aluminium wire staples and glass pane 3mm thick fixed with MS pins and oil putty/silicon glue incl two coats of synthetic enamel paint over one coat of red oxide primer and incl taking down old, complete all as specified and directed.
S & F in repairs Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified
S&F aluminum handles, cast type anodized (size of handle 150mm) fixed with screw complete all as specified and directed.
S&F in repair 100mm long butt hinges mild steel medium weight cold rolled ISI marked complete all as specified and directed
Supply & fixing 150mm long aluminum anodized barrel tower bolt of extrude section ISI marked fixed with screw complete all as specified and directed
S&F drawer side telescopic channel of standard size of standard length, inclusive of roller for moving drawer, mild steel bright finish or electrogalvanised width of flap 30mm (ISI Marked), complete all as specified and directed by Engr-in-Charge. Make:- Godrej, KIZONE, EBCO
S&F Stainless steel multipurpose baskets in wooden drawer / partition for storing ration of various type made of 4mm dia stainless steel rods, fixed in side partition etc, complete all as specified and directed by Engr-in-Charge. Male:- Godrej, Ozone, Overseas
S&F Stainless steel luddle-craddle stand for cutley complete all as directed by Engr-in-Charge. Make :- Godrej, ozone, overseas
S&F steel concealed hydraulic auto soft closing hinges fixed to wooden frames/shutters in cupboard all as specified and directed by Engr-in-charge
S&F stainless steel magnet catcher of size 55mmx30mmx15mm for wooden pannel, complete all as specified and as directed by Engr-in-charge.
S&F 100mm brass handles, cast type, polished bright complete all as specified and as directed by Engr-in-charge.
S&F 250 mm long aluminum alloy, anodised sliding door bolts, with hasp, staple (bolt type and fixing clip of sheet, cast or extruded section or cast aluminium alloy and complete all as specified.
M&L ceramic glazed colour tiles as in vertical surfaces such as skirting ,dados etc with area of each tile exc.0.11 sqm and not exc. 0.18 sqm 7-8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface incl. 10 mm thick plaster in CM 1:4 complete all as specified colour and design approved by Engr-in-Charge Make:- Somany,Kajariya,Nitco
M&L non-skid coloured ceramic tiles(Square/Rectangular) area of each tile exceeding 0.06 sqm but not exc. 0.11 sqm ,7-8 mm thick in floors etc set & jointed in neat cement slurry & pointed in white or coloured cement to match including screed bed bedding layer of 15 mm thick in CM 1:6 complete all as spfd. colour and design approved by Engr-in - Charge,Make:-Somany,Kajaria,Nitco
M&L coloured vitrified tiles (light shade) 10 mm thick(Square/Rectangular) polished area of each tiles not exc 0.36 Sqm in floors etc set and jointed in polymer modified adhesive and pointed with cement grout of the shade approved by Engr-in-charge Make:-Somany,Kajaria,Nitco
All as per item No.51 above but on vertical surfaces such as dado, skirting and risers to steps, set and jointed in polymer modified adhesive and pointed with white cement grout of the shade approved by Engr-in-Charge Make : Somany, Kajaria, Nitco
M&L for Virified Ceramic tiles Dark shade/double charged/ultracharged 10mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed with cement grout of the shade approved by engr-in-charge.
All as per item No.52 above but on vertical surfaces such as dados, skirtings and risers to steps, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 on masonry/ concrete surfaces complete all as spfd colour and design approved by Engr-in-Charge Make:- Somany,Kajaria,Nitco
Supply only for premium polymer modified tile adhesive for large format range of vitrified and porcelain tiles for floor and wall application over concrete substrate and application for tile on tile over substrate like ceramic, vitrified, mosaic and natural stone complete all as specified and directed by engr-in-charge. Make :- Pidilite, Roff, Dulux, Dr fixit, Fevicol, Asian Paints, Simcrete, Tielo, Berger
Supply only filling the joints between tiles by epoxy grout to match the colour and pattern of tile as approved by Engr-in-charge. Make : Astral, Roff, Lapox, Araldite, Polygrip and Asian Paints
M&L tubes medium grade galvanized with all fitting and fixed complete to walls or laid in floors for 15mm bore pipe.
M&L tubes medium grade galvanized with all fitting and fixed complete to walls or laid in floors for 20mm bore pipe.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.
S&F in repairs PVC (SWR) pipes, 110mm dia, single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified & directed. Make- Supreme, finolex, kisan
S&F in repairs PVC (SWR) pipes, 75mm dia, single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified & directed. Make- Supreme, finolex, kisan
S&F in repair PVC (SWR) bends 110mm bore
S&F in repair PVC (SWR) bends 75mm bore
S&F in repair PVC (SWR) 'P" trap 110mm bore
S&F in repair PVC (SWR) 'S' trap 75mm bore
S & F in repair Vitreous china wash hand basin size 550x400mm (flat back or angle back type) including 32mm dia brass chromium plated waste fitting a pair if cast iron bracket duly painted / erecting stand including cutting and pinning in ends making good disturbed surfaces in CM 1:3 complete all as specified.
S/F in repair Vitreous china wash down water closet Pan (pedestal Pattern) white (excluding fixing bolt ,flushing cistern and flush pipe size 580 x 440 mm white with integral foot rest connecting flushing cistern and flush pipe complete all as specified and as directed. Make:- Cera, Essco, varmora
S & F in repair seat and cover for pedestal pan white/black closed pattern with flat bottom and cover and MS chromium plated aluminium hinge device complete all as specified and as directed.
S&F in repairs One piece WC incl twin flushing cistern and soft closing seat cover and all connected items complete all as specified and as directed. . Make :- CERA ,Jaquar, Varmora
S&F in repairs vitreous china orrisa pattern white squatting pan orissa pattern size 580x440mm with integral foot rest incl making necessary connections to soil pipes and flushing cistern complete all as specified and as directed. Make:- Cera, Essco, varmora
S&F in repair PVC Flushing Cistern 10 litre capacity low level valve less, symphonic action type white with inlet, ball valve, flaoat and handle including 32mm dia PVC Flush pipe a pair of cast iron brackets duly painted/erecting stand including cutting and pinning in ends, making good disturgbed surfaces in cement mortar 1:3 including taking down unserviceable flushing cistern complete all as specified and directed. Make: - Cera, Jaquar, Hindustan
S&F in repair 15 mm bore angle valve with wall flange fency type chromium plated, screwed down, high pressure with cruth or butterfly handle Make:-CERA, Jaquar, MARC , Kohler
S&F in repair brass chromium plated wall mixer with long bend pipe for overhead shower with built-in non return valve complete for mixing hot & cold water screwed down for iron pipe 15mm bore Make : CERA, Jaquar, MARC, Kohler
M&L in repair 15mm dia bib taps with wall flange and aerator chromium plated fency type with crutch or butter fly handle, screwed down screwed for iron pipe or brass ferrule and fixed Make: CERA, Jaquar, MARC, Kohler
S&F in repairs single lever sink mixer(wall mounted) with 200 mm(8') long swivel spout connecting les and wall flanges complete all as spfd Make:- CERA, Jaquar, Kohller, MARC
S&F in repair two way angle cock with wall flange complete Make:-CERA, Jaquar, MARC, Kohler
S&F in repair pillar cock 15mm bore fancy type chromium plated, screwed down high pressure with or without lettered HOT or COLD with long screwed and fly-nuts screwed for iron pipe or brass ferrule complete all as specified and as directed. Make: CERA, Jaquar, MARC, Kohler
S&F in repair Brass chromium plated WHB center hole single lever mixer for mixing hot & cold Water screwed down for iron pipe 15mm bore complete all as specified and as directed. Make:- CERA, Jaquar, Kohller, MARC
S&F in repair health faucet ABS body with wall hook and 1 mtr SS braided rubber hose pipe Make:- Cera, Jaquar,Kohller, MARC
S&F in repair 32mm dia PVC waste pipe with cap socket suitable for 32 mm waste coupling complete all as directed. Make: PRAYAG, Supreme, sakti
S&F in repairs open type stainless steel 4 shelves plate rack size 30" x 30" x 8" mirror finish / bright finish made out of 0.50 mm thick stainless sheet of grade 304/204cu complete all as specified and as directed.
S&F in repair sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified.
S&F in repair sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 940mm x 457mm double bowl size 428mm x 406mm x 230mm complete all as specified.
S&F in repair Glass shelf assembly 60cm long with CP rail complete all as specified and as directed .
S&F in repair Soap Disc complete all as specified and as directed Make :-CERA,Prayag,Jaquar
S&F in repairs stainless steel tumbler holder square made out of SS 304 (Silver Chrome finish) with size 100-120 mm x 80-100 mm with tumbler of suitable size / depth 50-75 mm dia complete all as specified and as directed. Make : CERA, Jaquar, Kohler, Prayag
S&F in repair corner glass shelf size 300X300 mm Make :-CERA, Jaquar, kohller, Prayag
S&F in repair brass chromium plated tubular towel rail ,20 mm dia,D type,60 cm long between flange complete all as spfd. Make :-CERA, Jaquar, kohller, Prayag
S&F in repair Towel rack size 600mm(24") complete all as spfd.Make:-CERA, Jaquar, Kohller, Prayag
S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified.`Make: PRAYAG, Supreme, sakti
S&F in repair stainless steel straight thread faucet hose replacement connection pipe for gysers,15mm size and 45cm long complete all as specified.``Make: PRAYAG, Supreme, sakti
S&F in repair Toilet paper holder -Make :- CERA, Jaquar, kohller, Prayag
S&F in repair PVC bath cabinet of size 400x 500mm fixed to wall with CP screw and cap all as directed by Engr-in-Charge. Make : Neelkamal / ARCO / JINDAL.
S&F in repair 3mm thick sheet glass ordinary quality in square nexc 0.50 Sqm each pane fixed with wooden beads/oil putty in steel/wooden window.
S&F in repair sheet glass 4mm thick, figured glass, pin headed type and glazing with oil putty or wooden beads supplied with shutters in square n.exc. 0.5 sqm in each pane.
Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc,complete all as specified and as directed
M&L for granite (of any type) 20mm thick work(table rubbed and polished) in steps,jambs,pillars,window cills'cooking plateform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including screed bed bedding layer of 15 mm thick in CM 1:4 complete all as spfd. and polishing complete.
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations.
S&F in repair 18mm thick plywood, grade BWR, type BB, fixed with screw to timber frame work, including 1mm thick PVC moulding all around including edging, complete all as specified and as directed by Engr-in-charge.
M&L for .90mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and as directed.
S&F in repair 50mm dia teak wood, polished cup board knob fixed with nut, screw and washer as directed by Engr in Charge.
S&F in repair continuous (piano) hinge, mild steel, bright finish or electrogalvanised 30mm wide fixed with screw complete all as spfd.
S&F in repair of 25 dia stainless steel curtain rods incl funnel horns,l bracket and middle support,end caps etc all as directed by Engr in Charge.
S&F in repair stainless steel wire cloth. 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples
S&F in repairs stainless steel glossy / polished / matte finish 5 pin cloth hangar with minimum 30 cm long plate complete all as specified and as directed.
S&F in repairs minimum 5 spray multification minimum 12 cm overhead rain shower
S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.
S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified
M&L Sheet glass of thickness 5.5mm, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane
S&F TMT bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with Mild Steel wire (annealed) not less than 0.9mm dia complete all as specified.
formwork to soffits of suspended slab such as Flat roof slab, floor slab, landing and similar work not exceeding 200mm thick surface horizontal or sloping, fair finished surface of concrete, all as specified .
Dismantling RCC posts or struts any section, including taking out embedded portion and making good disturbed ground, posts embedded in concrete, brickwork, masonry etc., complete all as specified and as directed by Engineer-in-Charge.
S&F Mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified.
Excavation in post holes (or similar holes) each not exc. 0.50 cum, in any type of soil and getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc. 25cm, watering and removal of excavated materials to a distance n. exc. 50m and making good surfaces, complete all as specified & directed.
Dismantling fencing wire mesh, any type complete all as specified.
Supply only chain link mild steel galvanised fencing ,complete all as specified and directed by Engr-in-charge.
Fixing only chain link fencing including line wires, of any mesh,size and any type after restraining and rescuring including making good ,complete all as specified and directed by Engr-in-charge.
M&L for Providing precast cement concrete type B-1 1:2:4 (20mm graded aggragate) set in cement mortar 1:4 in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces for any height incl. the rate of scaffolding ,complete all as specified and directed by Engr-in-charge.
M&L for Providing reinforced cement concrete type B-1 1:2:4 (20mm graded aggragate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engr-in-charge.
M&L for cleaning the surface of accessible roof periodically twice for the period of contract) complete all as specified and directed by Engr-in-charge.
ANIKET TRADERS
APARANA ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .