Construction work of 96 Type-B residential units Thana Kotwali Khalilabad in District Sant Kabir Nagar.

Select, At Par, Excess (+), Less (-) IOCL

Tender Inviting Authority: S.E. PMGSY CIRCLE, PWD, PRAYAGRAJ

Name of Work:- Construction work of 96 Type-B residential units Thana Kotwali Khalilabad in District Sant Kabir Nagar.

Contract No: 132/Nivida(Building)-PMGSY Circle Pray/26 Date 24-01-2026

Sl. No. Item Description Item Code / Make Quantity Units Estimated Rate UNIT Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

0_) Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: CUM. Excess(+) Full Conversion INR

0_) Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. CUM. Excess(+) Full Conversion INR

0_) Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration S.Q.M. Excess(+) Full Conversion INR

0_) Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) CUM. Excess(+) Full Conversion INR

0_) Thermo-Mechanically Treated bars work such as in reinforced concreted or reinforced brick work (when not included in overall rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage. Qtl Excess(+) Full Conversion INR

0_) All works upto plinth level. Concrete of M30 grade with minimum cement content of 350 kg /cum CUM. Excess(+) Full Conversion INR

0_) Add for using extra cement in the items of design mix over and above the specified cement content therein. Qtl Excess(+) Full Conversion INR

0_) Brick Work with common burnt clay F.P.S (non modular) brick of class designation 7.5 in foundation and plint in : Cement mortar 1:6 (1 cement : 6 coarse sand) CUM. Excess(+) Full Conversion INR

0_) Boring with hydraulic piling rigs with power units, providing and installing cast in situ single under reamed piles of specified diameter and length below pile cap in M-25 cement concrete, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and the length of the pile to be embedded in pile cap etc. all complete. (Length of pile for payment shall be measured upto to the bottom of pile cap) 550 mm dia piles RMT. Excess(+) Full Conversion INR

0_) Vertical load testing of piles in accordance with IS 2911 (Part IV) including installation of loading platform by Kentledge/Anchor piles method and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & the direction of Engineer in-charge. Note: 1. Initial and Routine Load Test shall not be carried out by Dynamic method of testing. Note: 2. Testing agency shall submit the design of loading platform for the approval of Engineer-in-charge. Initial test (Test Load 2.5 times the Safe capacity) NOS. Excess(+) Full Conversion INR

0_) Routine test (Test Load 1.5 times the Safe capacity) NOS. Excess(+) Full Conversion INR

0_) This form work also comprises of M.S. angle iron, "Z" shaped brackets braced diagonally at 0.90 to 1.00 mtr. centre to centre on extrenal wall face just the level below on which to lay M.S. square tube panels (Challis) and guard railing supports to form working platform and 40 mm dia G.I. telescopic adjustable props to support deck formwork and beam soffit panels including de-shuttering the formwork from odd/even level to be shifted/lifted to next alterante odd/even level before which the points and shuttering surface to be thoroughly cleaned, pins greasing and shuttering surface oiling propoerly before fixing all complete including sealing of gap between kicker plates of wall panel and floors (if any) as per design of formwork as provided by shuttering supplier and as per direction of the Engineer-in-charge including filling and finishing the holes of varied sizes and shapes (left by keys/pins of aluminium form work shuttering while de-shuttering) with GP-2 cementeous polymer compound mixed with water in ratio prescribed by manufacturer to form consistent workable dough for pushing it in the holes upto full depth of wall using appropriate tools and finishing smooth all complete as per directions of the Engineer-in-charge. sqm Excess(+) Full Conversion INR

0_) Thermo-Mechanically Treated bars work such as in reinforced concreted or reinforced brick work (when not included in overall rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage. Qtl Excess(+) Full Conversion INR

0_) All works above plinth level upto floor V level. Concrete of M30 grade with minimum cement content of 350 kg /cum CUM. Excess(+) Full Conversion INR

0_) This form work also comprises of M.S. angle iron, "Z" shaped brackets braced diagonally at 0.90 to 1.00 mtr. centre to centre on extrenal wall face just the level below on which to lay M.S. square tube panels (Challis) and guard railing supports to form working platform and 40 mm dia G.I. telescopic adjustable props to support deck formwork and beam soffit panels including de-shuttering the formwork from odd/even level to be shifted/lifted to next alterante odd/even level before which the points and shuttering surface to be thoroughly cleaned, pins greasing and shuttering surface oiling propoerly before fixing all complete including sealing of gap between kicker plates of wall panel and floors (if any) as per design of formwork as provided by shuttering supplier and as per direction of the Engineer-in-charge including filling and finishing the holes of varied sizes and shapes (left by keys/pins of aluminium form work shuttering while de-shuttering) with GP-2 cementeous polymer compound mixed with water in ratio prescribed by manufacturer to form consistent workable dough for pushing it in the holes upto full depth of wall using appropriate tools and finishing smooth all complete as per directions of the Engineer-in-charge. sqm Excess(+) Full Conversion INR

0_) Add for using extra cement in the items of design mix over and above the specified cement content therein. qtl Excess(+) Full Conversion INR

0_) Extra for R.C.C./ B.M.C/ R.M.C. work above floor V level for each four floors or part thereof. V level for each four floors or part thereof. CUM. Excess(+) Full Conversion INR

0_) IX level for each four floors or part thereof. CUM. Excess(+) Full Conversion INR

0_) Providing and fixing bright /matt finished Stainless Steel sliding door bolt of approved quality & make with necessary screws etc all complete. 250x16 mm Nos Excess(+) Full Conversion INR

0_) Providing and fixing bright /matt finished Stainless Steel tower bolt of approved quality & make with necessary screws etc all complete. 250x10 mm Nos. Excess(+) Full Conversion INR

0_) Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. 125mm Nos. Excess(+) Full Conversion INR

0_) Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. Nos. Excess(+) Full Conversion INR

0_) Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. Nos. Excess(+) Full Conversion INR

0_) Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge. 10 x 60 mm each Excess(+) Full Conversion INR

0_) Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked, exterior grade (Grade l Type ll), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of the Engineer-in-Charge SQM. Excess(+) Full Conversion INR

0_) Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) Kg. Excess(+) Full Conversion INR

0_) 9.21.1 - Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 9.127.2 - Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws Sqm Excess(+) Full Conversion INR

0_) 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames. Sqm Excess(+) Full Conversion INR

0_) Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness .The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat . Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. Rmt Excess(+) Full Conversion INR

0_) Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding K.G. Excess(+) Full Conversion INR

0_) Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) K.G. Excess(+) Full Conversion INR

0_) Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm). SQM Excess(+) Full Conversion INR

0_) Providing and fixing fly proof galvanised M.S. wire gauze to windows and clerestory windows using galvanised M.S. wire gage with average width of aperture 1.4 mm in both directions with wire of dia. 0.63 mm.With 12 mm mild steel U beading. SQM Excess(+) Full Conversion INR

0_) Providing and fixing wire gauge shutters using stainless steel grade 304wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws : v35mm thick shutter With ISI marked stainless steel butt hinges of required siz Second class teak wood Sqm Excess(+) Full Conversion INR

0_) Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces Sqm Excess(+) Full Conversion INR

0_) Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete : 20 mm dia Rmt Excess(+) Full Conversion INR

0_) Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). SQM Excess(+) Full Conversion INR

0_) Providing and fixing stainless steel (Grade 304) railing made of hallow tubes, chanells, plates etc. including welding grinding buffing, polising and making corvechare (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer in charge.(for payment purpose only weight of stainless steel members shall be considered excluding fixing assessories such as nuts, bolts, fasteners etc. Kg. Excess(+) Full Conversion INR

0_) Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm). Sqm Excess(+) Full Conversion INR

0_) D-Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. E-The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge : SQM. Excess(+) Full Conversion INR

0_) Making grooves 10 to 12 mm wide x 8 mm deep in plaster the all or in ceiling vertically of horizontally as required. R.M. Excess(+) Full Conversion INR

0_) Add for plaster drip course in plastered surface or moulding to R.C.C. projections. R.M. Excess(+) Full Conversion INR

0_) Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. SQM. Excess(+) Full Conversion INR

0_) Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. SQM. Excess(+) Full Conversion INR

0_) Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Double charge vitrified tile polished finish of size of Tile 600 x 600 mm SQM. Excess(+) Full Conversion INR

0_) Glazed Vitrified tiles Matt/Antiskid finish of size of Tile 600 x 600 mm SQM. Excess(+) Full Conversion INR

0_) Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent SQM. Excess(+) Full Conversion INR

0_) Marble work gang saw cut (polished and machine cut) of thickness 18 mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately). Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble. Area of slab over 0.50 sqm SQM. Excess(+) Full Conversion INR

0_) Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab over 0.50 sqm SQM. Excess(+) Full Conversion INR

0_) Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. SQM. Excess(+) Full Conversion INR

0_) Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. SQM. Excess(+) Full Conversion INR

0_) Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. SQM. Excess(+) Full Conversion INR

0_) Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) SQM. Excess(+) Full Conversion INR

0_) Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture SQM. Excess(+) Full Conversion INR

0_) Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture) SQM. Excess(+) Full Conversion INR

0_) French spirit polishing : Two or more coats on new works including a coat of wood filler SQM. Excess(+) Full Conversion INR

0_) Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth. SQM. Excess(+) Full Conversion INR

0_) Brick edging 7cm wide 11.4 cm deep to plinth protection with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including grouting with cement mortar 1:4 (1 cement : 4 fine sand). RMT. Excess(+) Full Conversion INR

0_) including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : Sqm Excess(+) Full Conversion INR

0_) Providing and fixing fire resistant door frame of section 143 x 57 mm having built in rebate made out of 16 SWG G.I. sheet (zinc coating not less than 120 gm/sqm) duly filled with vermuculite based concrete mix, suitable for mounting 60 minutes fire rated door shutters. The frame is fitted with intumuscent fire seal strip of size 10x4 mm (minimum) alround the frame and fixing with dash fastener of approved size and make, including applying a coat of approved brand fire resistant primer etc. complete as per direction of Engineer-in-charge (Dash fastener to be paid for separately). RMT Excess(+) Full Conversion INR

0_) Providing and fixing 50 mm thick glazed fire resistant door shutters of 60 minutes fire rating conforming to IS:3614 (Part-II), tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles, lock rail, top rail 100 mm wide, bottom rail 200 mm wide, made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/m2) duly filled FR insulation material and fixing with necessary stainless steel ball bearing hinges of approved make, including applying a coat of approved fire resistant primer etc. all complete as per direction of Engineer-in-charge (panneling to be paid for separately). SQM. Excess(+) Full Conversion INR

0_) Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc., with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than 120 gm/m²) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm from the edges and 150 mm c/c , including applying a coat of approved fire resistant primer/ powder coating of not less than 30 micron on G.I. beading, & special ceramic tape of 5 x 20 mm size etc complete in all respect as per NBC 2016, IS 16231 (Part 3):2016 and as per direction of Engineer-in-charge with glass of required thickness having 60 minutes of fire resistance both integrity & radiation control (EW60) and minimum 20 minutes of insulation (EI20). The manufacturer have to give test report/certification of fire glass and the glass should have the stamp showing the value of E, EW & EI. The glass shall be tested in approved NABL accredited lab or by any other accreditation body which operates in accordance with ISO/IEC 17011 and accredits labs as per ISO/IEC 17025 for testing and calibration scopes shall be eligible. The maximum glazing size shall not be more than 1100x2200 mm (w x h) or 2.42 sqm. SQM. Excess(+) Full Conversion INR

0_) Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch & Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all complete. EACH Excess(+) Full Conversion INR

0_) 0Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch & Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all complete. CUM Excess(+) Full Conversion INR

0_) Wall Joint of 100 mm gap SQM Excess(+) Full Conversion INR

0_) White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests each Excess(+) Full Conversion INR

0_) W.C. pan with ISI marked white solid plastic seat and lid each Excess(+) Full Conversion INR

0_) White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps each Excess(+) Full Conversion INR

0_) Providing and fixing Salem Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with CI brackets and stainless steel waste with plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required. 510x1040 mm bowl depth 225 mm each Excess(+) Full Conversion INR

0_) Providing & fixing PVC waste pipe for sink oncluding PVC waste fitting Complete 32mm Dia each Excess(+) Full Conversion INR

0_) 40mm Dia each Excess(+) Full Conversion INR

0_) Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Circular shape 450 mm dia each Excess(+) Full Conversion INR

0_) Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. each Excess(+) Full Conversion INR

0_) Providing and fixing toilet paper holder : C.P. brass each Excess(+) Full Conversion INR

0_) Centrifugally cast (spun) iron S&S pipe 100mm dia cast (spun) iron S&S pipe RMT Excess(+) Full Conversion INR

0_) Providing and fixing MS holder bat clamps of approved design to cast iron (spun) pipe embedded in and Including cement concrete blocks 10 x10 x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. For 100mm dia. Pipe EACH Excess(+) Full Conversion INR

0_) Providing and fixing heel rest sanitary bend, in Centrifugally cast (spun) iron pipe S&S 100mm EACH Excess(+) Full Conversion INR

0_) Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete. Sand cast iron S&S as per IS : 3989 EACH Excess(+) Full Conversion INR

0_) Providing and fixingPLAIN JUNCTION of required degree Sand cast iron S&S as per IS : 3989 EACH Excess(+) Full Conversion INR

0_) Providing and fixing terminal guard Sand cast iron S&S as per IS - 3989 EACH Excess(+) Full Conversion INR

0_) Providing and fixing collar. Sand cast iron S&S as per IS - 3989 EACH Excess(+) Full Conversion INR

0_) Providing and lead caulked joint 100 Dia EACH Excess(+) Full Conversion INR

0_) Providing and fixing cast iron trap of self cleansing design with cast iron screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors. 100 mm inlet and 100 mm outlet,Sand cast iron S&S as per IS: 3989 EACH Excess(+) Full Conversion INR

0_) Painting sand cast iron / centrifugally cast iron( spun) iron soil, waste and vent pipes and fittings with paint of any colour such as chocolate, grey or buff etc. over a coat of primer (of approval quality) for new work 100mm dia RMT Excess(+) Full Conversion INR

0_) Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour weighing not less than 105 gms. EACH Excess(+) Full Conversion INR

0_) Providing & fixing PTMT towel ring trapezoidal shape 215 mm long 200 mm wide with minimum distance of 37 mm from wall face with concealed fittings arrangement of approved quality and colour weighing not less than 88 gms EACH Excess(+) Full Conversion INR

0_) Providing and fixing PTMT towel rail complete with brackets fixed wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms EACH Excess(+) Full Conversion INR

0_) Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge..Internal work - Exposed on wall 15 mm dia nominal bore RMT Excess(+) Full Conversion INR

0_) 20 mm dia nominal bore RMT Excess(+) Full Conversion INR

0_) 25 mm dia nominal bore RMT Excess(+) Full Conversion INR

0_) 32 mm dia nominal bore RMT Excess(+) Full Conversion INR

0_) 40 mm dia nominal bore RMT Excess(+) Full Conversion INR

0_) Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal outer dia pipes RMT Excess(+) Full Conversion INR

0_) 20 mm nominal outer dia pipes RMT Excess(+) Full Conversion INR

0_) Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge 50 mm dia, nominal bore RMT Excess(+) Full Conversion INR

0_) 65 mm dia, nominal bore RMT Excess(+) Full Conversion INR

0_) 80 mm dia, nominal bore RMT Excess(+) Full Conversion INR

0_) Providing and fixing of gun metal gate valve with CI wheel of approved quality (screwed ends) 25mm dia, nominal bore EACH Excess(+) Full Conversion INR

0_) 32 mm dia, nominal bore EACH Excess(+) Full Conversion INR

0_) 40 mm dia, nominal bore EACH Excess(+) Full Conversion INR

0_) 50 mm dia, nominal bore EACH Excess(+) Full Conversion INR

0_) 65 mm dia, nominal bore EACH Excess(+) Full Conversion INR

0_) 80 mm dia, nominal bore EACH Excess(+) Full Conversion INR

0_) Providing and fixing uplasticised PVC connection pipe with brass unions : 15 mm nominal bore RMT Excess(+) Full Conversion INR

0_) Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet 100 mm diameter EACH Excess(+) Full Conversion INR

0_) Providing and fixing C.P. brass bib cock of approved quality confirming to IS:8931 15mm nominal bore EACH Excess(+) Full Conversion INR

0_) Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15mm nominal bore EACH Excess(+) Full Conversion INR

0_) Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931 a) 15 mm nominal bore. 15 mm nominal bore EACH Excess(+) Full Conversion INR

0_) Providing and fixing PTMT grating of approved quality and colour 100 mm nominal dia EACH Excess(+) Full Conversion INR

0_) Excavating trenches of required width for pipes, cables, etc, including excavation for sockets, depth upto 1.5 m including getting out the excavated materials, returning the soil as required in layers not exceeding 20 cm in depth including consolidating each deposited layers by ramming, watering etc. stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50m Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia. RMT Excess(+) Full Conversion INR

0_) Providing, laying and jointing P.V.C. pipes including testing of joints etc. complete : 150 mm dia pipe RMT Excess(+) Full Conversion INR

0_) Providing, laying and jointing glazed stoneware pipes grade ‘A’ with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 150 mm diameter RMT Excess(+) Full Conversion INR

0_) Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 150 mm diameter S.W. pipe RMT Excess(+) Full Conversion INR

0_) Providing and fixing square-mouth S.W. gully trap grade 'A'’ complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than With F.P.S. Bricks class designation 75 each Excess(+) Full Conversion INR

0_) Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 250 mm dia rcc pipe RMT Excess(+) Full Conversion INR

0_) Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 grade With F.P.S. bricks with class designation 150 each Excess(+) Full Conversion INR

0_) Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) : With F.P.S. bricks class designation 150 each Excess(+) Full Conversion INR

0_) Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 coarse sand (Zone III) : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each Excess(+) Full Conversion INR

0_) Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, upto 90 metre depth below ground level. 400 mm dia RMT Excess(+) Full Conversion INR

0_) Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 200 mm nominal size dia RMT Excess(+) Full Conversion INR

0_) Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, onforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge 200 mm nominal size dia RMT Excess(+) Full Conversion INR

0_) Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. Cum Excess(+) Full Conversion INR

0_) Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-incharge. Cum Excess(+) Full Conversion INR

0_) Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge. Cum Excess(+) Full Conversion INR

0_) Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineerin- charge. Cum Excess(+) Full Conversion INR

0_) Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by “V” notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in pproved laboratory, i/c disinfection of ubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per uirement and direction of Engineer-in-charge. HRS Excess(+) Full Conversion INR

0_) Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 200 mm dia EACH Excess(+) Full Conversion INR

0_) Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). 200 mm dia EACH Excess(+) Full Conversion INR

0_) Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) Cum Excess(+) Full Conversion INR

0_) Thermo-Mechanically Treated bars work such as in reinforced concreted or reinforced brick work (when not included in overall rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage. QTL Excess(+) Full Conversion INR

0_) STP Disinfection and commissioning of tank L Excess(+) Full Conversion INR

0_) Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres. SQM Excess(+) Full Conversion INR

0_) Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density . Cum Excess(+) Full Conversion INR

0_) Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer-in-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately). Note:- Cement content considered in M-30 is @ 340 kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately. Cum Excess(+) Full Conversion INR

0_) Providing and fixing in position pre-moulded joint filler in expansion joints. RMT Excess(+) Full Conversion INR

0_) Providing and laying in position bitumen hot sealing compound for expansion joints etc. Using grade ‘A’ sealing compound. SQM Excess(+) Full Conversion INR

0_) Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & attern over 50mm thick compacted bed of course sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & direction of Engineerin- Charge. 80mm thick Cement concrete paver block of M-30 grade with approved colour, design & pattern. Providing and laying Kerb Stone SQM Excess(+) Full Conversion INR

0_) Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres. SQM Excess(+) Full Conversion INR

0_) Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25 Cum Excess(+) Full Conversion INR

0_) Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & attern over 50mm thick compacted bed of course sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & direction of Engineerin- Charge. 80mm thick Cement concrete paver block of M-30 grade with approved colour, design & pattern. SQM Excess(+) Full Conversion INR

0_) Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 20 mm cement plaster SQM Excess(+) Full Conversion INR

0_) 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) Cum Excess(+) Full Conversion INR

0_) 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) Cum Excess(+) Full Conversion INR

0_) Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). Cum Excess(+) Full Conversion INR

0_) Brick Work with common burnt clay F.P.S (non modular) brick of class designation 7.5 in foundation and plint in : Cement mortar 1:6 (1 cement : 6 coarse sand) Cum Excess(+) Full Conversion INR

0_) Brick Work with common burnt clay F.P.S (non modular) brick of class designation 7.5 in super structure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) Cum Excess(+) Full Conversion INR

0_) Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources) SQM Excess(+) Full Conversion INR

0_) Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws SQM Excess(+) Full Conversion INR

0_) Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding KG Excess(+) Full Conversion INR

0_) Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) No. Excess(+) Full Conversion INR

0_) Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) KG Excess(+) Full Conversion INR

0_) 12 MM PLASTER1:6 (1 cement : 6 coarse sand) SQM Excess(+) Full Conversion INR

0_) 15 MM PLASTER 1:6 (1 cement : 6 coarse sand) SQM Excess(+) Full Conversion INR

0_) 6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand) In Ceiling SQM Excess(+) Full Conversion INR

0_) Making grooves 10 to 12 mm wide x 8 mm deep in plaster the all or in ceiling vertically of horizontally as required. RMT Excess(+) Full Conversion INR

0_) Add for plaster drip course in plastered surface or moulding to R.C.C. projections. RMT Excess(+) Full Conversion INR

0_) Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate SQM Excess(+) Full Conversion INR

0_) Cement plaster skirting (up to 30 cm height) with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement. 18 mm thick. SQM Excess(+) Full Conversion INR

0_) Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. SQM Excess(+) Full Conversion INR

0_) Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with 4.0 mm thick glass panes SQM Excess(+) Full Conversion INR

0_) Providing and fixing Oxidized iron door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 250x16 mm No. Excess(+) Full Conversion INR

0_) Providing and fixing Oxidized iron tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : 250x10 m 250X10 mm No. Excess(+) Full Conversion INR

0_) Providing and fixing Oxidized iron handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :125 mm No. Excess(+) Full Conversion INR

0_) House, Chemical & Biological Storage Area, Backwash Tank, Filtered Effluent Storage Tank, Internal Road Parking, Boundary Wall, Horticulture works, Campus Lighting, Flow Meters, all Pumping Machinery such as Equalized Lifting Pumps, Clarifier Mechanism both for primary and secondary clarifier, machinery for flash mixers, Air Blowers, Chlorine Tonner, Pumping Machinery for Pumping of Biological and Chemical Sludge, Pumping of Treated water Effluent, Rising Main from Treated Effluent Sump to the nearby Drain with Sluice Valves , Non- Return Valves, Air Valves and other Accessories including connection to Recycling Network, Water Supply Service line for providing water supply to all units wherever required, all HT, LT Panels their rooms for Air Blowers etc., including Bye pass arrangement & trial run during the stabilization period. The scope of work also includes the construction of Boundary Walls, Roads & Pathways, Landscape & Horticulture, and Campus Lighting etc. at STP Site. Civil, Mechanical, Electrical required for proper performance shall form the part of the scope complete in all respect.Upto 50000 KLD KLD Excess(+) Full Conversion INR

0_) 50000 KLD to 100000 KLD KLD Excess(+) Full Conversion INR

0_) External W/S arrangements with, T.W. boring of 400 mm dia with 200 mm dia P.V.C. pipe assembly, 7.50 H.P. submersible pump including supply of all accessories starter, panel etc. & pipe arrangements complete. Job Excess(+) Full Conversion INR

0_) Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. Group A Point Excess(+) Full Conversion INR

0_) Wiring for twin control light point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. Point Excess(+) Full Conversion INR

0_) Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X2.5 sq. mm + 1X2.5 sq. mm earth wire Metre Excess(+) Full Conversion INR

0_) 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Metre Excess(+) Full Conversion INR

0_) 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre Excess(+) Full Conversion INR

0_) 4 X 16 sq. mm + 2 X 6 sq. mm earth wire Metre Excess(+) Full Conversion INR

0_) Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. 2 Pair Metre Excess(+) Full Conversion INR

0_) Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ ecessed steel/ PVC conduit as required. Metre Excess(+) Full Conversion INR

0_) Supplying and fixing of following sizes of medium class PVC onduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20 mm Metre Excess(+) Full Conversion INR

0_) 32 mm Metre Excess(+) Full Conversion INR

0_) Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 A switch No. Excess(+) Full Conversion INR

0_) 15/16 A switch No. Excess(+) Full Conversion INR

0_) 3 pin 5/6 A socket outlet No. Excess(+) Full Conversion INR

0_) 6 pin 15/16 A socket outlet No. Excess(+) Full Conversion INR

0_) Telephone socket outlet No. Excess(+) Full Conversion INR

0_) TV antenna socket outlet No. Excess(+) Full Conversion INR

0_) Bell push No. Excess(+) Full Conversion INR

0_) Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. No. Excess(+) Full Conversion INR

0_) Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. No. Excess(+) Full Conversion INR

0_) Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required. 1 or 2 Module (75mmX75mm) No. Excess(+) Full Conversion INR

0_) 3 Module (100mmX75mm) No. Excess(+) Full Conversion INR

0_) 6 Module (200mmX75mm) No. Excess(+) Full Conversion INR

0_) 8 Module (125mmX125mm) No. Excess(+) Full Conversion INR

0_) 12 Module (200mmX150mm) No. Excess(+) Full Conversion INR

0_) Installation, Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required. No. Excess(+) Full Conversion INR

0_) Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required. No. Excess(+) Full Conversion INR

0_) Installation, Testing and Commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS/HFFR PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required. No. Excess(+) Full Conversion INR

0_) Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Up to 450 mm sweep No. Excess(+) Full Conversion INR

0_) Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes. 0.00_) No. Excess(+) Full Conversion INR

0_) Supplying & fixing suitable size Gl box with modular plate and cover in fronton surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required. 0.00_) No. Excess(+) Full Conversion INR

0_) Supplying and fixing PVC batten/ angle holder including connections etc. as required. 0.00_) No. Excess(+) Full Conversion INR

0_) Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 200 A.36KA.FPMCCB 0.00_) No. Excess(+) Full Conversion INR

0_) Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/lsolator) 4 way (4 + 12), Double door 0.00_) No. Excess(+) Full Conversion INR

0_) 6 way (4 + 18), Double door 0.00_) No. Excess(+) Full Conversion INR

0_) Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required Single pole 0.00_) No. Excess(+) Full Conversion INR

0_) Double pole 0.00_) No. Excess(+) Full Conversion INR

0_) Triple pole and neutral 0.00_) No. Excess(+) Full Conversion INR

0_) Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. 0.00_) No. Excess(+) Full Conversion INR

0_) Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 A 0.00_) No. Excess(+) Full Conversion INR

0_) Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 A 0.00_) No. Excess(+) Full Conversion INR

0_) Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. 0.00_) No. Excess(+) Full Conversion INR

0_) Supplying, installing on wall, testing and commissioning of following capacity Air Insulated Compact Type Rising Mains for use on 3 phase 4 wire 415 volts, 50Hz A.C. supply with enclosure having IP-54 rating after fixing the tap off boxes and all accessories, made of 1.6mm thick steel sheet duly powder coated in convenient sections complete with 4 Nos aluminium bus bars having current density of 130 A/ sq cm at nominal current rating, necessary joints & expansion joints, fire barrier at each floor, provision of tapping at every metre, continuous earthing with 2 Nos aluminium strip of suitable size (one on each side) including, G.l. clamping brackets, angle iron bracket, steel fasteners, connecting to earthing system etc. as required. 1250 A, Isc = 50kA for 1 second 0.00_) Metre Excess(+) Full Conversion INR

0_) Supplying, installation, testing & commissioning of following capacity End Feed Unit for the existing Air Insulated Compact Type bus trunking/ rising mains for use on 3 phase 4 wire 415 volts, 5OHz A.C. supply made with 1.6mm thick steel sheet enclosure (IP54) duly powder coated with provision of MCCB/ACB (but without MCCB/ACB) complete with necessary joints including clamping brackets, angle iron bracket, steel fasteners, connecting to earthing system etc. as required 1250 A, Isc= 50kA for 1 sec 0.00_) No. Excess(+) Full Conversion INR

0_) Supplying, installation, testing & commissioning of following capacity Plug In/ tap off box on the existing Air Insulated Compact Type bus trunking/ rising mains for use on 3 phase 4 wire 415 volts, 50Hz A.C. supply made with 1.6mm thick sheet steel enclosure (IP54) duly powder coated with provision of MCCB/ACB (but without MCCB/ACB) complete etc. as required 200 A, lsc= 25kA for 1 sec 0.00_) No. Excess(+) Full Conversion INR

0_) Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.l. suspenders including G.l. bolts & nuts, etc. as required. 300 mm width X 50 mm depth X 1.6 mm thickness 0.00_) Metre Excess(+) Full Conversion INR

0_) Earthing with G.l. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. 0.00_) Set Excess(+) Full Conversion INR

0_) Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. 0.00_) Set Excess(+) Full Conversion INR

0_) Supplying and laying 6 SWG G.l. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with Gl thimble etc. as required. 0.00_) Metre Excess(+) Full Conversion INR

0_) Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm) 0.00_) Metre Excess(+) Full Conversion INR

0_) Supplying and laying 25 mm X 5 mm G.l. strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.l. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.l. nut bolt & spring washer spaced at 50mm) Metre Excess(+) Full Conversion INR

0_) Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. Metre Excess(+) Full Conversion INR

0_) Providing and fixing 25 mm X 5 mm G.l. strip on surface or in recess for connections etc. as required. Metre Excess(+) Full Conversion INR

0_) Providing and fixing 6 SWG dia G.l. wire on surface or in recess for loop earthing as required. Metre Excess(+) Full Conversion INR

0_) Fixing of lightning conductor finial (single prong) with base plate including holes etc. complete as required. No. Excess(+) Full Conversion INR

0_) Jointing copper / G.l. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required. 0.00_) No. Excess(+) Full Conversion INR

0_) Fixing of copper/ G.l. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run) 0.00_) No. Excess(+) Full Conversion INR

0_) Fixing of copper/ G.l. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run) 0.00_) No. Excess(+) Full Conversion INR

0_) Providing and fixing testing joint, made of 20 mm X 3 mm thick G.l. strip, 125 mm long, with 4 nos. of G.l. bolts, nuts, chuck nuts and spring washers etc. complete as required. Laying copper/ G.l. tape 32 mm X 6 mm from earth electrode directly in ground as required. 0.00_) No. Excess(+) Full Conversion INR

0_) Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 2 X 6 sq. mm (19mm) 0.00_) No. Excess(+) Full Conversion INR

0_) 3-1/2 X 35 sq.mm 0.00_) No. Excess(+) Full Conversion INR

0_) 3-1/2 X 120 sq. mm 0.000 No. Excess(+) Full Conversion INR

0_) 3-1/2 X300 sq.mm 0.000 No. Excess(+) Full Conversion INR

0_) 4 X 10 sq. mm (25mm) 0.000 No. Excess(+) Full Conversion INR

0_) Providing and fixing circular/Hexagonal G.I. Box for ceiling fan clamps, of internal dia 140 mm, 73 mm height, top LID of 1.5 mm thick G.I. sheet with its top surface hacked for proper bonding, top LID shall be screwed into the G.I. box by means of 3.3 mm dia rounded screws, one lock at the corners. Clamps shall be made of 12 mm dia M.S. bar bent to shap as per standard drawing. (DSR Civil-2014 item no. 10.18) 0.000 Each Excess(+) Full Conversion INR

0_) Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing Complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in- Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast /Extruded aluminium Body including trim . 18 watt 0.00_) Each Excess(+) Full Conversion INR

0_) Supplying, installation, Testing & Commissioning of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%, Operating voltage AC 140- 270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, Flicker free (flicker should be below 5 %), life time (LED,Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and 18- 22 watt Each Excess(+) Full Conversion INR

0_) 1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) Each Excess(+) Full Conversion INR

0_) Supply of AC 300mm Sweep, 230/250 Volts, 50 Hz exhaust fan (Heavy Duty) with blades,cover etc. complete as required. each Excess(+) Full Conversion INR

0_) Supply of AC 200mm Sweep, 230/250 Volts, 50 Hz exhaust fan (Light Duty) with blades,cover etc. complete as required each Excess(+) Full Conversion INR

0_) Supply of Factory made 12 to 20 Watt LED Bulb fitting,cool day light,(65000 K temp.) suitable for Batton/Angle holder including making connection.Complete in all respect. each Excess(+) Full Conversion INR

0_) Supply of LED Tube Light with batten suitable for up to 1 X 10 watt LED tube light fitting including tube on Surface complete in all respect.(2ft) CAT- AAA each Excess(+) Full Conversion INR

0_) Supply of water tight oblong 10 Watt LED bulk head luminaire having die cast housing with driver set confirming to IP 65 and above Protection.Complete in all respect. each Excess(+) Full Conversion INR

0_) Supply and fixing of Three phase multifunctional electronic energy meter 10 to 60 Amp. Capacity fitted in intergral box on wall complete in all respect. each Excess(+) Full Conversion INR

0_) upplying and laying of aluminium conductor PVC insulated armoured served sheathed cable 1100 volts grade at the depth of 750 mm below ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on side and on top as directed by Engineer-Incharge ,complete in all respect including excavation and refilling.The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 6 sq. mm 2 core 0.00_) Mtr. Excess(+) Full Conversion INR

0_) 10 sq. mm 4 core 0.00_) Mtr. Excess(+) Full Conversion INR

0_) 35 sq. mm 3-1/2 core 0.00_) Mtr. Excess(+) Full Conversion INR

0_) 120 sq. mm 3-1/2 core 0.00_) Mtr. Excess(+) Full Conversion INR

0_) 300 sq. mm 3-1/2 core 0.00_) Mtr. Excess(+) Full Conversion INR

0_) Supply of Lightening Finial,25mm dia X 300 mm long,copper 0.00_) each Excess(+) Full Conversion INR

0_) Supply of 20 mm X 3 mm copper tape (.533 kg/mtr.) 0.00_) Mtr. Excess(+) Full Conversion INR

0_) Supply of 32 mm X 6 mm copper tape (1.705 kg/mtr.) 0.00_) Mtr. Excess(+) Full Conversion INR

0_) Providing and fixing following rating and breaking capacity 1250 A 50kA ACB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 0.00_) each Excess(+) Full Conversion INR

0_) 63 Amp. MCCB-3 Nos.+(63 Amp FP MCB-8) AS FLOOR PANEL 0.00_) each Excess(+) Full Conversion INR

0_) 100 Amp. MCCB-1 No & 63 Amp. MCCB-3 Nos.+(100 AMP. MCCB-4 NOS.+63 AMP MCB-4 NOS.) AS EMERGENCY PANEL 0.00_) each Excess(+) Full Conversion INR

0_) Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system Ten Loop Panel. 0.00_) No. Excess(+) Full Conversion INR

0_) Supplying, installation, testing & commisssioning of intelligent addressable programmable sounder complete as required. 0.00_) No. Excess(+) Full Conversion INR

0_) Supplying, installation, testing & commissioning of addressable fire control module complete as required. 0.00_) No. Excess(+) Full Conversion INR

0_) Supplying, installation, testing & commissioning of addressable phone control module complete as required. 0.00_) No. Excess(+) Full Conversion INR

0_) Supplying, installation, testing & commissioning of addressable manual call point complete as required. 0.00_) No. Excess(+) Full Conversion INR

0_) Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required. 0.00_) No. Excess(+) Full Conversion INR

0_) Supplying, installation, testing & commissioning of addressable strobe complete as required. No. Excess(+) Full Conversion INR

0_) Supplying, installation, testing & commissioning of fire fighter telephone handset complete as required. No. Excess(+) Full Conversion INR

0_) Supplying, installation, testing & commissioning of fire fighter phone jack complete as required. No. Excess(+) Full Conversion INR

0_) Supplying, installation, testing & commissioning of 6 inches dia, 2 watts, 70/100 volts ceiling speaker complete as required. No. Excess(+) Full Conversion INR

0_) Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required speaker cable Single pair, 2-core, 1.5 sqmm Metre Excess(+) Full Conversion INR

0_) Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and accessories like coupler etc. as required. Metre Excess(+) Full Conversion INR

0_) Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 150 mm dia m Excess(+) Full Conversion INR

0_) Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required : Single headed Gunmetal Set Excess(+) Full Conversion INR

0_) Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 80 mm dia Set Excess(+) Full Conversion INR

0_) 100 mm dia Set Excess(+) Full Conversion INR

0_) Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required : 80mm dia Set Excess(+) Full Conversion INR

0_) 100mm dia Set Excess(+) Full Conversion INR

0_) Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required. No. Excess(+) Full Conversion INR

0_) Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : 100mm dia Set Excess(+) Full Conversion INR

0_) Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : Gun Metal Set Excess(+) Full Conversion INR

0_) Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. 30 m Set Excess(+) Full Conversion INR

0_) Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required : Gun metal Nos. Excess(+) Full Conversion INR

0_) Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : 2 way-100 mm dia M.S. Pipe Set Excess(+) Full Conversion INR

0_) Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required. Set Excess(+) Full Conversion INR

0_) Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. No. 1349.1095 Excess(+) Full Conversion INR

0_) Providing, fixing, testing & commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required : 100mm dia Set Excess(+) Full Conversion INR

0_) Supply and fixing of fire extinguisher, ABC Type (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket,along with supply of all materials and labour for proper completion of work. 4.0 kg. capacity 0.00_) Each Excess(+) Full Conversion INR

0_) Supply and fixing of C02 type fire extinguisher (ISI Marked IS : 2878 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work. V4.5 kg. capacity 0.00_) Each Excess(+) Full Conversion INR

0_) Providing & fixing carbon steel Fire Man Axe with rubber insulated handle tested to 20000 volts. 0.00_) Each Excess(+) Full Conversion INR

0_) Supplying and installing at approved location approved make fire buckets of 24 gauge galvanized steel sheet, standard of round bottom shape, painted white inside and red outside and black on the bottom, inscribed with letter "FIRE" in black and gold. Cost shall be inclusive of providing MS stand duly painted over a coat of primer (one stand shall be suitable for hanging 5 buckets). 0.000_) Each Excess(+) Full Conversion INR

0_) 1200x900 mm (Indoor Cabinet) Only Frame 0.000_) Each Excess(+) Full Conversion INR

0_) Providing and Fixing of Self illuminated /Auto Glow Exit Signs printed on photo-luminescent sheet containing self illuminated base chemical,of appropriate size not less than 400x150mm,suspended from ceilling or fixed to the walls with accessories as riquired and as directed at site. Each Excess(+) Full Conversion INR

0_) Providing & fixing cast iron air release valve of 25 mm dia including 25 mm dia Ball valve with fittings etc. as per the requirement. 0.000_) Each Excess(+) Full Conversion INR

0_) Providing and Fixing M.S Structural Work fabricaed from standard sections e.g MS rounds, angles, channels including cutting to size, drilling, welding, fixing and welding to insert plates in RCC structural members as directed by Engineer-in-Charge including cutting and making good the walls and floors (For sprinkler Pipe support etc.). Tie Road 10 mm 0.999_) Each Excess(+) Full Conversion INR

0_) Angle Frame 35 / 40 mm x 5 mm 0.000_) Each Excess(+) Full Conversion INR

0_) Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required : 2280 lpm at 56 m Head 0.000_) Set Excess(+) Full Conversion INR

0_) Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required : 2280 lpm at 56 m Head Note: * The head of the pump is selected in a manner so as to give a minimum 3.5kgf/cm2 pressure at the highest/ farthest point 2280 lpm at 56 m Head 0.000_) Set Excess(+) Full Conversion INR

0_) Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump) 180 lpm at 56 m Head 0.000_) Set Excess(+) Full Conversion INR

0_) Designing, Supply, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specification 0.000_) Set Excess(+) Full Conversion INR

0_) Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. (Uderground) 150 mm. Dia m Excess(+) Full Conversion INR

0_) Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Single headed Gunmetal Set Excess(+) Full Conversion INR

0_) Supplying, installation, testing & commissioning of deluge valve (to be used for water curtains) UL listed with wet pilot basic trim assembly for DVA with test and alarm, drip and drain valve with water motor gong complete as required. 100mm dia Set Excess(+) Full Conversion INR

0_) 150mm dia Set Excess(+) Full Conversion INR

0_) Providing, installation, testing & commissioning of electric release trim assembly for deluge wall with two way solelnoid valve, weather proof operation on 24 volts DC supply complete as required. Set Excess(+) Full Conversion INR

0_) Providing, fixing, testing & commissioning of flanged end Basket Strainer made from MS body with bottom and top removable flanges with nuts, bolts etc having filteration area at least 6 times the cross sectional area of the pipe. Make: Kalpana/Kartar/Sir/Advance. 200 mm dia Each Excess(+) Full Conversion INR

0_) Supply & fixing of 6 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thick) having 3mm thickness with single arm bracket length of 1 mtr. length in 1:2:4 RCC foundation bolt including the cost of foundation, excavation & back filling and Required T&P complete in all respect. each Excess(+) Full Conversion INR

0_) Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. 40 A TPN each Excess(+) Full Conversion INR

0_) LED Street light fixture, powder coated pressure die cast aluminum body (System lumen efficacy ≥120 <135 lm/Watt) Supplying, installation, Testing & Commissioning of Street light LED fixture powder coated pressure die cast aluminium body with driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5,Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMIEMC As per CISPR 15 , lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).72 watt each Excess(+) Full Conversion INR

0_) SOLAR PHOTO VOLTAIC POWER GENERATION SYSTEM ADMIN BUILDING KWP Excess(+) Full Conversion INR

0_) Supply Installation , Testing & Commissioning of LIFTS with power operated centre opening doors and AC variable voltage & variable frequency control,car safety & Governor, Guides, guide rails, ropes, car platform, cabin finishes (stainless steel), car & landing doors (stainless steel), hoist motors, braking system, Automatic Rescue Device (ARD) etc. complete as per the CPWD Specifications and realated IS standards upto date. 13 Passenger,1.5 mps,12 stops , 12 Openings SET Excess(+) Full Conversion INR

0_) Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. 63 A TP&N NO Excess(+) Full Conversion INR

Total in Figures Excess(+) Full Conversion INR

Quoted Rate in Figures Select

Please Enable Macros to View BoQ information