ADDITION/ALTERATION TO STUDENT TOILET BLOCK (05 NOS) IN BLDG NO WB-05, WB-166, SM-154 GATE AND PROVISION OF UNDERGROUND WATER SUPPLY SYSTEM AND COMPOUND WALL FOR LAB FCE UNDER GE (MCTE) MHOW

Amount

S & F in repairs Urinal Pot with sensotronic, flushing valve for urinal with complete set with size installation box with fixing accessories set all as specifed and directed by Engr-in-Charge. Make : Jaquar Cat Part No URS-WHT-13255 or equivalent approved.

S & F in repairs Vitreous China Thin Rim Table Top Basin. Shape -Rectangular, Size - 530 x 420 x 140mm. Make : Jaquar Cat Part No JDS-WHT-25907N or equivalent approved.

S & F in repairs Sensor Faucets Single Lever for Basin, Kubix Prime Tall Boy Sensor Faucet for Wash Basin (Battery Operated). Make : Jaquar Cat Part No SNR-35017PM or equivalent approved.

S & F in repair Urinal Partitions Curved Shaped urinal partition with frosted glass of 10mm thick, Height - 900mm, Width -450mm. Finish : Chrome. Make : Jaquar Cat Part No JSE-CHR-110UC450X or equivalent approved.

S & Fixed in repair Vitreous china EWC with PP soft close seatcover, Hinges, Fixing Accessories. Size : 360 x 475 x 395mm, P Trap. Make : Jaquar Cat Part No CNS-WHT-551PSPP or equivalent approved.

S & Fixed in repair Angular Stop Cock 15mm bore with wall Flange . Make : Jaquar Cat Part No OPP-15053PM or equivalent approved.

S & Fixed in repair Exposed Part Kit of Stop Cock 15mm bore & Flush Cock with fittings Sleeve, Operating Lever & Adjustable wall Flange with seal (compatible with ALD-083, ALD-089, ALD-081). Make : Jaquar Cat Part No OPP-15083PM or equivalent approved.

S & Fixed in repair Towel Ring Square Round Flange. Make : Jaquar Cat Part No CAN-1121N or equivalent approved.

S & Fixed in Repair Single Towel Rail 600mm Long Stainless Steel. Make : Jaquar Cat Part No AKP-35711PS or equivalent approved.

S & Fixed in Repair Soap Dish Holder. Make : Jaquar Cat Part No CAN-1131N or equivalent approved.

S & Fixed in Repair Soap Dispenser with Glass Bottle. Make : Jaquar Cat Part No ACN-1135N or equivalent approved.

S & Fixed in Repair Toilet Roll Holder with Stainless Steel. Make : Jaquar Cat Part No ACN-1153S or equivalent approved.

S & Fixed in Repair Hand Dryer-Smartflow. Make : Jaquar Cat Part No HDR-WHT-M04A or equivalent approved.

S & Fixed in Repair Hand Shower (Health Faucet) with 1 meter Long Easy Flex Tube in Chrome Finish & Wall Hook. Make : Jaquar Cat Part No ALD-565 or equivalent approved.

S & Fixed in Repair SS Two way bib cock 15mm bore with wall Flange. Make : Jaquar Cat Part No LYR-38041 or equivalent approved.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debrish and rubbish off the premises and stacking serviceable tiles.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6

M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/ shade) of 350 x 250 x 7mm/ 450 x 300 x 7mm thick in vertical surfaces, as in dado/ skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

S & Fixed in repair Vitreous china, wash down water closet pan (pedestal pattern), white, including plastic water closet seat cover, closed pattern with flat bottom, connection to drain (or outgoing pipe) and to flushing pipe, antisiphonage pipe etc, complete.

S&F in repairs low level Flushing cistern 10 ltr capacity, PVC valveless syphonic action type, white with inlet, ball valve, float valve and handle, flush pipe, incl brackets and flushing pipe fixed in repairs complete all as specified and directed

S & F under counter ivory wash basin, vitreous china size 560 x 410 x 180mm including cutting for and pinning in ends of brackets or erecting stand but incl wastecoupling and brackets, fixing of supply and waste pipe, Rag Bolt Assy 3/8 " complete all as specified and directed.

S&F in repair chromium plated brass Central hole basinmixer (Hot and cold) without popup waste system complete screwed down for15 mm GI bore pipe complete all as specifed and directed

S&F in repair 20mm dia brass chromium plated tubular towel rails, D type, 60cm long between flanges, complete all as specified.

S & F in repairs Corner Glass Shelf of Size 320 x 320mm with Silver chromium finished border Oval Range premium quality all as specifed and directed by Engr-in-Charge.

S & F in repairs Stainless Steel Wall Mount Case with Soap Holder & Brush Holder fixed to wall all as specified and directed by Engr-in-Charge.

S&F in repair SS 600mm towel ring brass chromium plated with glossy finishes.

S&F in repair 15mm size PVC connections internally threaded with PVC washer, PTMT nuts of length 450mm complete all as specified and directed.

S & F in repairs Stop/ angle cock 15mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions.

S&F in repairs Health Faucet ABS with Rubbit Cleaning System, 1.25m Long PVC Flexible Tube & ABS Wall Hook.

S & F in repairs two way bib cock 15mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions.

S & F PVC size 110 x 110 mm Nahani Trap all as specfied and directed.

S&F Brass Bottle Trap 300mm (12") Designer wall connection pipes and wall flange complete all as specified and diretced. Make : Prayag cat No BEA-28 or equivalent as approved by GE.

S&F Grating 100mm dia of CP with or without hole complete all as specified and directed.

S & F in repairs Toilet Paper Holder Stainless Steel fixed to wall all as specifed and directed by Engr-in-Charge.

S & F in repairs Hand shower 1.5 m CP Flexible SS Tube, 5 flow Hand Shower, adjustable wall hook, rubbit cleaning system all as specified and directed.

S&F in repairs Brass Butter Fly Jet Spray with 1.2 meter Long Flexible Tube of premium quality fittled to Vitreous china, wash down water closet pan (pedestal pattern), Stop cock/ angle cock all as specfied and directed.

M & L for brass chromium plated Conceled stop cock 15mm with flange .

S&F in repair Vitreous China Urinal Pot of size 245 x 320 x 560mm Half Stall white colour of premium quality including all fittings like CP coupling etc all as specified and directed.

Taking down chowkats or frame of any description exc 1.5 Sqm each and n.exc 4Sqm (without taking off shutters from the frames) & remove off the premises complete all as specified and directed.

S&F Factory made single extruded Actual WPC (Wood Polymer Composite) with European technology Floresta (Pletina) Both Side Laminated solid plain flush door shutter of 30mm Thickness, comprising of virgin polymer, calcium carbonate and natural fiber (wood powder/ Saw dust) and nontoxic additives having minimum density 700kg/ cum and screw withdrawal strength of 1474 N face) and 774 N (edge), Minimum compressive strength 24.6 N/ mm2, Modulus of elasticity 1861 N/mm2 with property of being termite/ borer proof, water/ moisture proof and fire retardant. Make : Floresta or equivalent approved.

S&F 150mm size Stainless steel tower bolt round all as specified and directed by Engr-in-Charge.

S&F 125mm size, butt hinges, Stainless steel all as specified and directed by Engr-in-Charge.

S&F 150mm size wooden door pull handles curve Stainless steel all as specified and directed by Engr-in-Charge.

S&F 300mm length, Stainless steel aldrops (round nuckle) sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm with a wall thickness of 5mm made out of extruded 5mm single side prelaminated PVC foam sheet, mitre cut at two corners and jointed with 2 Nos of 150mm longnbrackets of 15mm x 15mm M S square tube. The two vertical door profiles are to be reinforced with 19 x 19mm M S square tube. The door frame shall be fixed to the wall using 65/100mm long M.S screws through the frame by using PVC fasteners. A minimum of 4 Nos of screws to be provided for each vertical member etc. complete as per manufacturers specification and direction of Engr-in-Charge all as per drawing on Sl Page No.180 of SSR Part-II

S&F factory made Factory made solid panel PVC door shutter 30 mm thick both side pre-laminated consisting of frame made out of M.S. tube of 19 gauge thickness adn size of 19mm x 19mm for style and 15 x 15mm for the top and bottom rails, MS frame shall have a coat of steel primers of approved make and manufacture. MS frame covered with 5mm thick heat moulded PVC 'C' channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tappered in 45 degree angle on either side forming styles and 5mm thick 95mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rails. Top bottom and lock rails shall be tapered on both sides to form lock rails. Top bottom and lock rails shall be provided either side of the panel. 10mm (5mm x 2) thick 20mm wide side cross PVC sheet be provided asgap insert for the top rail and bottom rail. Panelling of 5mm thick both side PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with 7mm (5mm + 2mm) thick x 15mm wide PVC sheet beading on inner side and joined togehter with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the 'C' channel using PVC solvent adhesive etc. complete as per direction of Engr-in-Charge. manufacturer's specification & drawing for W.C and bathroom door shutter. all as specified and directed by Engr-in-Charge all as per drawing on Sl Page No.177 of SSR Part-II

S&F 150mm size aluminium, anodised barrel tower bolt of extruded section.

S&F120mm size, butt hinges, heady weight, cold rolled mild steel.

S&F 150mm size extruded aluminium alloy handles, fabricated type.

Taking down chowkats or frame of any description n. exc 1.5 Sqm each (without taking off shutters from the frames) & remove off the premises complete all as specified and directed.

S&F powder coated aluminium ventilator, half portion of the ventilator covered with 5.5mm thick frosted glasses and half portion fittted with frosted louvers and outer side fitted with mosquito proof galvanised wiremesh including removing old steel ventilators incl finishing the demolished surfaces with rendering 10-15mm thick CM 1:4 including 02 coat of cement based paints with primer incl all fittings, accessories etc all as specifed and directed by Engr-in-Charge. Make : Jindal or equivalent approved.

S&F in repairs 18mm thick factory made PVC sheet one side pre-laminated sheet kitchen cabinet shutter. The 18mm thick sheet shutter bent at 90 degree and finish all edges at level for marking edge lipping bending for 0.5mm thick PVC sheet lipping at all four edges using bonding tape etc complete all as per specified and directed by Engr-in-Charge and manufacturers specification.

S & F in repairs factory made PVC shelf/partition of required size consisting of panel of 18mm thick required size consisting of panel of 18mm thick celuka PVC ply and for supporting the hold of shelf/ partition and shall provided 3 edges in size 18mm x 18mm as per required lenght the front side of the edge visible in the front of the shelf/ partition to be edge lipped by 18mm width x 1mm thick PVC sheet of density 600 kg/ cum manufactured by ISO 9001-2015 Certified Company, using solvent cement etc all as directed by Engr-in-Charge.

S & F Continuous (piano) hinges, 30mm width of flaps (when open) in mm brass, bright finish or electrogalvanised Continuous (piano) hinges, bright finish or electrogalvanised

S&F 50 x 15mm size magnet door catcher for closing for PVC door shutter complete all as specifid and directed .

S&F 100mm size MS mat/glossy finish handle complete all as specified and directed.

Taking down cement or cement lime plaster of any description including racking out joints, hacking for keys, scrubbing down with water etc, complete all as specified and directed.

M&L for Rendering 15mm thick on fair faces of concrete/ brick surfaces in cement mortar 1:4 mixed with water proofing compound as per manufacturer's instruction, finished fair and even without using extra cement complete all as specified and directed. Note :- WPC shall be measured and paid for separately as supply only under respective item of sch A.

Supply only Liquid water proofing compound ISI Marked (used 200 ml per bag of cement) complete all as specified and directed.

M&L for preparation of new surfaces of walls and applying two coats of Premium Acrylic Smooth exterior paint and including priming coat of exterior primer and incl wall putty birla white as per manufacturers instructions complete all as directed by Engr-in-Charge. (Note : painting will be done by brush/ spray/ roller of building upto the height G+2) all as per directed by Engr-in-Charge).

M&L for complete removal of existing surfaces of walls and applying two coats of Premium Acrylic Smooth exterior paint and including priming coat of exterior primer and incl wall putty birla white as per manufacturer's instructions complete all as directed by Engr-in-Charge. (Note : painting will be done by brush/ spray/ roller of building upto the height G+1) all as per directed by Engr-in-Charge).

M&L for Rendering 15mm thick on fair faces of concrete/brick interior surfaces in cement mortar 1:6, finished fair and even without using extra cement complete all as specified and directed.

M&L for preparation of new surfaces of plastered walls and applying Two coats of distemper oil emulsion incl priming the surface and incl wall putty birla white all as directed by Engr-in-Charge.

M&L for preparation of complete removal of existing treatment of walls and applying Two coats of distemper oil emulsion incl priming the surface and incl wall putty birla white all as directed by Engr-in-Charge.

M&L for Rendering 5mm thick on fair faces of concrete/ brick interior ceiling surfaces in cement mortar 1:3, finished fair and even without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling and applying Two coats of distemper oil emulsion incl priming the surface and incl birla white ceiling putty all as directed by Engr-in-Charge.

M&L for preparation of old plastered surfaces of ceiling and applying Two coats of distemper oil emulsion incl priming the surface and incl birla white ceiling putty all as directed by Engr-in-Charge.

Demolition of stone slab and tiles, interlocking paver block laid bedded and pointed in any mortar of any description or thickness in floor complete all as specifed

M&L for Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, table top for wash basin, urinal partition, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite

Demolition of cement concrete (unreinforced) of any description as in ground floors and pavings not exceeding 15cm thickness (above or below ground floors) complete all as specified and directed

M&L for broken stone or boulders hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a floor/ true surface.

M&L for 50mm PCC 1:2:4 Type B-0 (Using 40mm stone agg) as in sunken floor with water proofing compound of Asian Paint, Pidilite, Dr Fixit or equivalent, complete all as directed and specified.

M&L for water proofing treatment to sunken surfaces of the slab in following sequences:- (for 10 Years Gaurantee)

(a) Slope correction by using M-20 (Nominal Mix) concrete minimum 25mm thickness at one end and a slope of 1:20 by using 12.5mm graded stone aggregate with integral water proofing Chemical PIDI PROOF-LW mixed in proporation 200ml/ 50 Kg cement of DR Fixit of Pidilite Industries Ltd or STP No.1 (liquid) of STP Ltd in proporation 200ml/ 50 Kg cement or equivalent as per manufacturer instructions complete.

(b) PCC padding with cement concrete 1:1.5: 3 type A 0 (using 12.5mm graded stone aggregate) 25mm thick with integral water proofing compound "Dr Fixit" manufactured by M/S Bouchemic or equivalent as per manufacturer instructions complete.

(c) Vertical sides plastered in CM 1:3, 15mm thick with WPC and 72 hours testing for water tightness by ponding of water complete.

(d) Application of two water proof coats black solution manufactured by M/S Dr fixit or equivalent as per manufacturer instructions all over and testing again for water tightness by ponding of water for 72 hours complete.

Taking up or down 15mm bore steel tubing and connections, including cleaning for re fixing complete all as specifed and directed.

S&F, laying and testing for 15mm bore GI tubing medium grade galvanised steel tubing including all fittings such as union, reducer, sockets, reducing bends elbows tee, checknuts, caps, plugs etc fixed to wall and ceilling or laid in floors complete all as specifed and directed.

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified.

S & F 20mm bore of tube medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors.

Demolition of brick or stone boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone works and precast concrete articles, complete all as specified and directed

M&L for Brick work with sub class B bricks ,straight or curved on plan exc 6m mean radius built in CM 1:6 Complete all as Specified and directed

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description in any position not otherwise specifically provided for and removing demolished materials to a distance exceeding 250 Mtr complete all as specified and directed.

M&L for RCC type B-01:2:4 (12.5mm graded stone aggt) for shelves supported on walls.

M&L for use and waste form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work for fair finished surfaces of concrete complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.

All as per item No.84 above but 5mm and over and including 10mm dia in stirrups, spacers, binders etc .

Dismantling of cast iron, SGSW, PVC or reinforced concrete drain pipes jointed in neat cement mortar and taking out of trenches or floor or wall if required

S&F PVC (SWR) pipe 75mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive fixed to wall with iron cleats etc complete all as specified and directed.

S&F PVC (SWR) pipe 110mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive fixed to wall with iron cleats etc complete all as specified and directed.

S&F in repair PVC (SWR) bend/ shoe 75mm bore, any radius as required and jointed with approved adhesive and fixed to floor complete all as specified and directed.

S&F in repair PVC (SWR) Tee, Reducer/ junction (single T) equal or unequal 75mm dia, any radius as required and jointed with approved adhesive and fixed to floor complete all as specified and directed.

S&F in repair PVC (SWR) bend/ shoe 110mm bore, any radius as required and jointed with approved adhesive and fixed to wall complete all as specified and directed.

S&F in repair PVC (SWR) Tee, Reducer/ junction (single T) equal or unequal 110mm dia, any radius as required and jointed with approved adhesive and fixed to wall complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise described complete all as specified and directed

S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framed work and similar works complete all as specified and directed. conforming to Fe 290 Ged-E-165

Cutting chases in brick wall built in cement mortar for concealed water tubing and making good with cement mortar in 1:4 ,cutting depth not exc 10 cm as directed.

M & L for two coat of synthetic enamel paint on steel surface of any description over 10 cm in width or girth not otherwise described incl preparation of new steel surfaces.

Disconnecting & taking down existing water tank of capacity exc 500 liter and not exc. 1000 litre and removing from site complte and S&F rotational moulded polyethylene water storage tanks 1000 lts capacity (cylindrical vertical with closed top) hoisted with and including 20mm dia ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or for brass ferrule and fixed in position all as per SSR Part-I complete all as specified & directed.

S&F in repair 15mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed

S&F in repair 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed

S&F in repair 25mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed

Excavation in hard/ dense soil in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50 m and making good surfaces.

M&L for Preparation of new treated surface of wall and applying two Coats of cement base paint with roller incl priming the surfaces with chalk whiting complete all as specified and as directed.

M & L for cement concrete 1:4:8 type D2 (40mm graded aggregate) using for foundation, filling and mass concrete etc.

Returning fillng in, including spreading, levelling, watering and well ramming in layers not exc 25cm complete all as specified and directed. (Note :- ramming of soil can be done after laying of chain like fencing into the ground 100mm below ground level all as specifed and directed by Engr-in-Charge)

Use & waste of Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter

Use & Waste of Formwork to sides of pillars, posts, struts, piers, columns and stanchions

M&L for RCC type A 1, 1: 1.5: 3 (20mm graded aggregate) including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete

M&L for RCC type A-1,1.5;3 (using 20mm graded stone aggregate) as in column pillars post and struts etc all as specified

S&F ornamental framed work as in doors or gates of angle or other section with gussest plates, rails, braces, MS sheet etc, complete drilled for fixing of steel sheeting or other covering doors etc, to be prepared for hanging and sliding with and including either hooks and hinges or steel hanging door fittings and fixing complete conferming to gde Fe 410-W

S & F Mild steel, plain, black sheet 1.25mm in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws,clout nails or rivets and fixed to wood or steel framing with plain 40mm lap jointswith riveted or welded seams, including bending or turning up mitred angles complete all as specified and directed.

S&F 0.56mm Fibre glass reinforced translucent plain sheeting side lap fixed with coach screw and washer in gate all as specified and directed.

M&L for concealed point wiring with PVC insulated and unsheathed, single core FRLS cable of size 1.5 Sqmm stranded copper conductor, 1100 Volt grade, drawn into and including PVC rigid conduit not less than 20mm dia, medium grade, ISI marked with and including 1.5 Sqmm unsheathed green colour stranded copper conductor FRLS cable for continuous earth wire and including sunken pressed steel concealed terminal boxes of suitable size made out of 1.2mm thick sheet covered with 2.6mm thick white hylam sheet cover of suitable size for mounting switches/ sockets/ fan regulators or Modular flush box for mounting modular switches/ sockets/ regulators etc including cutting chasing in wall and making good disturbed surface with existing colour complete all as specified & directed for the following :-

(a) One light/ fan point controlled by one switch

(b) One switch/ socket outlet point 2/3 pin 5 amp multipurpose on independent board

All as per Item No.112 above, but with FRLS cable 2.5sqmm stranded copper conductor for switch/ socket outlet 5 Pin,15 Amps multipurpose controlled with 2.5 sqmm copper conductor FRLS cable as continuous earth wire of green colour on independent board.

Supply and fix in repairs/ replacement, switch piano flush type, 5 amps, 230V AC,single pole, one way

Supply and fix in repairs/ replacement, switch piano flush type 15 amps, 230V AC single pole one way

Supply and fix in repairs/ replacement, socket out let multipurpose suitable for 2/3 pin 5 amp flush type

Supply and fix in repairs/ replacement, socket out let 2 IN 1,multipurpose suitable for 3 pin 5/15 amp flush type.

Supply and fix in repairs, angle/ batton type holder insulated body in white colour

Supply and fix in repairs/ replacement,ceiling rose,3 phase, polycorbonate isolated body for surface type, three terminals.

S&F LED lamp of 7 W (B-22 Base) 6500K complete all as directed.

Supply and fix in repairs LED trim line PC batten type LED light 1 x 20 Watt, without LED tube rod, pre-wired for LED tube, and 100 lumen/ watt, product No LCTLN-20-CDL complete with all accessories duly connection with three core flexible copper cable and duly fixed on two Nos PVC square boxes complete all as specified and directed.

Supply and fix in repairs retrofit LED tube light T-8 type, 1 x 20/21 Watt, 6000K with extruded Al heat sink for efficient heat dissipation complete all as specified and directed.

Supply and fix in repairs LED trim line PC batten type LED light 1 x 9/10 Watt, without LED tube rod, pre-wired for LED tube, and 100 lumen/ watt, product No LCTLN-10-CDL complete with all accessories duly connection with three core flexible copper cable and duly fixed on two Nos PVC square boxes complete all as specified and directed.

S&F replacement of exhaust fan, steel body AC single phase 230 volt of size 300mm sweep complete with blade, frame and louvers all as specified and directed incl making/ alteration of hole wherever necessary making good disturbed surface, painting to match with existing surfaces.

Supply and fix in repairs double door SPN DBs 4 ways of powder coated DB's suitable for MCB's fitted with bus bar, Neutral link, Earth bar and Din ral complete.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 32 Amps and current carrying capacity in the MCB DB complete with connection testing and commissioning all as specified and directed. Make : L&T/ ABB/ scheider

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning. Make : L&T/ ABB/ scheider

M&L for Sub main wiring in repairs with two runs of single core FRLS PVC insulated unsheathed cable 1100 volts grade, 4 Sqmm size with multistranded copper conductor, drawn in and including concealed non metallic rigid PVC conduit of not less than 25 mm dia including one run of PVC insulated unsheathed 4 sqmm cable FRLS with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly in concealed wiring system by cutting of wall and making good disturbed surface of wall all as specified and directed. Note:- Two runs of 4.00 sqmm cable, one run of 4.00 sqmm cable and one run of PVC conduit will be measured as one unit.

S & F for Centrifugally cast (spun) Ductile iron pipe (ISI marked) 100mm bore with socket and spigot ends, conforming to IS 8329 / 2000 for water supply lines in standard length of 5.5 m / 6 m of Class “K-7” suitable for push on joints (rubber gasket DI jointing) with cement mortar lining inside the pipes with outside zinc coating as per IS 8329/2000 complete.

M&L for Ductile iron fitting for spigot socket pipes such as bends (any type radious and angle) tapers any type (straight, bends, increasing, decreasing or double socket etc) Tee pieces, single branch, 'Y' junction double branch, cross all socket or socket and spigot) collars, caps or plugs 100mm bore complete.

S & F for 100mm dia cast iron sluice valve both ends flanged, confirming to IS 14846 of 2000 duly ISI marked, PN-1.0 complete with stainless steel spindle and gun metal nut with and including making 2 Nos flanged joints with rubber gasket and MS nuts & bolts copmlete.

Cutting existing DI water mains and inserting DI tees (in position) for branch connections of the internal dia 150mm reducing to required length of pipe to connect the proposed 100mm DI pipe line including required Tee, bends, short pieces caps, plugs & unions etc all as specified including earth work complete.

M&L for construction of Fly ash brick masonry valve pit chamber of size 750 x 750 x 750mm (internal dimensions) in any type of soil including necessary excavation and earth work, angle iron frame (ISA-5050, 4mm thick) and 5mm thick MS Sheet cover with locking arrangements including painting two coats of synthetic enamel paint over a coat of red oxide primer complete. all as shown of TD drawing as per zonal specification.

S & F for LED post top lantern 50 watt light fitting made of cast aluminium spigot housing with decarative opal acrylic diffuser with IP 65 protection complete with all accessories fixed on GI pipe 50mm dia including removal of old unserviceable one complete all as specified and directed. Make Havells Cat Part no CORALMAXIPT50WLED757PSYMTOPC or its equavalent in Philips, Wipro.

Sppply & Laying XLPE insulated, armoured, electric cable of size 6 sqmm 2 core with aluminium conductor, 1100 volts grade, laid in trenches, fixed on poles/ walls or passing through pipes including provision of necessary lugs and glands & making necessary connection including taking down old unservicable cable of any core complete all as specified and directed, for the following. Make Havells/ polycab/ Finolex/ RR Kabel Ltd.

Supply and fix MCB SPN 6 to 32 amps 10 KA, 'C' series including connection with suitable size aluminium/ copper lugs complete all as specified and directed by Engr-in-Charge. Make Indoasian or equivalent in Crompton/ L&T/ ABB/ scheider

Excavating in trenches, in any type of soil not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc and getting out in any type of soil complete all as specified and directed.

Returning, filling in excavated approved soil, including spreading, leveling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.

Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Supply laying and jointing GI pipe 'light grade' 50 mm bore in trenches/under floors or roads/ along poles/ on wall incl clamps for protection of cables incl fittings complete all as specified and directed.

M & L for clean and dry sand (un washed) in trenches incl spreading and levelling for cushioning of UG cable complete all specified and directed. (Note :- Punned thickness shall be measured

M & L for brick size sub class ‘B’ (modular size), laid flat in trenches for protection of cable complete all as specified and directed.

sunway associates

S.S. Engineers