Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹83.7 L
EMD Value
₹1.7 L
Closing Date
12 Nov 2026, 3:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
NORTH
14 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N OR 'V' Whichever is less; where. V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per ANNEXURE-XXXIII, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender.
Defination of Similar Work :- Trenching,Cable laying,Location and /or signal foundation/erection/termination/wiring in connection with any signalling work
7 conditions
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tender document, Scope of work & GCC 2022 are attached with the tender.
Signalling works in connection with CTR/TTR works in NORTH section of Mumbai Division.
CR-BB-SNT-NORTH-2026-96~CR
CR-BB-SNT-NORTH-2026-96
Open
Works - General
12 Months
Mumbai, Maharashtra
₹0
₹1.7 L
15 Oct 2026
15 Oct 2026
29 Oct 2026
19 items across 1 schedule · ₹78,24,909.86 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Supply of portable drilling machine ( cycle Machine) for rail web suitable for holding 7-8 mm drill bit.One item should be get approved from consignee before bulk supply. (Inspection Agency Consignee) | Numbers | 5.00 | 14,233.58 | 71,167.9 |
| 2 | Wheel sensor with protectiontube of Frauscher makeMSDAC type Rsr 180 (withBBIK- M 12 GS05 fixing alongwith cable length of 10 mtr. (Inspection Agency RDSO) | Numbers | 2.00 | 1,77,246.61 | 3,54,493.22 |
| 3 | Wheel sensor with protection tube of Frauscher makeMSDAC type Rsr 180 (with BBIK- M 12 GS05 fixingalong with cable length of 5 mtr (GS05). (Inspection Agency RDSO) | Numbers | 1.00 | 1,57,922.64 | 1,57,922.64 |
| 4 | "Stainless steel 303 single piece 1 (1 / 4 "")( 31.7 MM) square head bolt length 100 MM forpoint machine with collar Nut, One plain washer, 50 x 3 MM thick, Spring Washer, Check Nut ( 3 / 4 "")thread. It should have head of thickness of 5 MM. (Inspection Agency Consignee)" | Numbers | 100.00 | 391.76 | 39,176 |
| 5 | "Panel push button for Siemens signal panel with contact making assembly of various colourRed, Grey, Blue, Yellow & Blue white dot complete. Consisting of colour Red-500, Blue- 500 , Blue with white dot-400,Grey-500, Yellow- 300, GREEN-300. (Inspection Agency Consignee)" | Numbers | 1500.00 | 37.92 | 56,880 |
| 6 | Soldering Iron 35 Watt, 250VAC , with 02 extra bit, Make- Soldron or similar. Make/Brand: As per tender. (Inspection Agency Consignee) | Numbers | 25.00 | 525.1 | 13,127.5 |
| 7 | Nylon Insulation Block Joint 52 kg Rail RDSO Specification no. IRS:S-40/84 with Admit . 1 Drawing no. SA -22101(Alt-6). Make- Arham or Similar ONE KIT CONSISTING OF (i) END POST=01 NO (ii) INSULATING PLATE =04 NO (iii) CHANNEL SIDE PLATE LH=02 NOS (IV) CHANNEL SIDE PLATE RH=02 NO (V)BUSH=08 NO (Inspection Agency Consignee) | Set | 50.00 | 283.2 | 14,160 |
| 8 | Supply of DWC HDPE pipe withone snap fit coupler and 'O'ring fire resistant, anti rodent,in 6 meter length of size 50mm outer dia as perRDSO/SPN/204/2011 Ver. 1.1with Amd.1 or latest.(Inspection Agency-Consignee) | Metre | 500.00 | 321.43 | 1,60,715 |
| 9 | Copper Lug 25 sqmm with single hole for AFTC track lead As per Drg. No. R Excise Duty -- ST- 12090. Make - Braco,Dowells, Shakti, Fixwell. (Inspection Agency Consignee) | Numbers | 5000.00 | 14.03 | 70,158 |
| 10 | M.S galvanized Split Pin as perIS:549/2002 size- 3/16 x3 (Inspection Agency Consignee)" | Numbers | 10000.00 | 2.13 | 21,300 |
| 11 | Supply of wire tree for use in pointmachine as per drg RST-11435,wiring tree lugs are to be crimped &soldered. (Inspection Agency Consignee) | Numbers | 300.00 | 469.72 | 1,40,916 |
| 12 | Twisted Drill size 13 x 19 mm(Part no. 5223118). (Inspection Agency Consignee) | Numbers | 50.00 | 2,478 | 1,23,900 |
| 13 | Twist Adaptor 19mm weldon for 13 mm (part no.210245FS). (Inspection Agency Consignee) | Numbers | 20.00 | 842.52 | 16,850.4 |
| 14 | High speed steel twist drill bitdia 7mm/13 mm suitable for battery operated drill machine make Eibenstok. Drill bit make: MAKITA/BOSCH/FEIN or Other reputed brand. (Inspection Agency Consignee) | Numbers | 300.00 | 396.89 | 1,19,067 |
| 15 | Battery oprated drill m/c drill (13mm)- 20 nos Twist Drill Size 13x19 mm L(Part No: 5223118). (Inspection Agency Consignee) | Numbers | 50.00 | 2,360 | 1,18,000 |
| 16 | 12V 42AH LEAD ACID SMF BATTERY (GEM OFFER EXIDE 12.0 Volt Volt Lead Acid Battery (EXIDE) Model | Exide Power safe Plus EP 42-12 AS PER GEM CONTRACT). (Inspection Agency Consignee) | Numbers | 50.00 | 3,259.2 | 1,62,960 |
| 17 | Battrey oprated drill m/c cutter 22.5 mm Rail TCT Cutter 22.5x 55 mm (Part No: 240289). (Inspection Agency Consignee) | Numbers | 40.00 | 3,840.9 | 1,53,636 |
| 18 | Execution of S & T work related to Signaling/ Enginnering/Signalling block in one block, five unskilledmanpower have to beprovided during block for S&Tconnection removing &refixing as per Railway siteengineer instruction. (Inspection Agency Consignee) | Job | 1500.00 | 3,971.52 | 59,57,280 |
| 19 | Casting of cement concrete to protect S&T equipments and laid cables, above pipes, Signal store etc by concrete mixture of cement, sand, stone in the ratio of 1:2:4 using 25 mm graded stone aggregate as per instruction of site in charge of railways. Concrete is to be casted with the help of suitable size shuttering form as per site requirement. Concrete is to be cured for sufficient time as per standard practices on railways. (Inspection Agency Consignee) | cum | 20.00 | 3,660.01 | 73,200.2 |
| Schedule total | ₹78,24,909.86 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCC_April-2022.pdf
ATTACHMENT
CORRECTIONSLIP1to11GCC2022_compressed.pdf GCC CORRECTION SLIP 1 TO 11
ATTACHMENT
FINALNEWTENDERDOC202696.pdf
ATTACHMENT
CORRECTIONSLIP1to11GCC2022_compressed.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .