ADDITION/ALTERATION OF CERTAIN JCDA (AF) OFFICER AT 1ST FLOOR AT ANNEXE-I BUILDING (OPW BLDG) CAMERO COMPLEX, PROVN OF PARAPET WALL AT CERTAIN LOCATION AT CAMERO OFFICERs MESS AT SUBROTO PARK AND PROVN OF ALUMINIUM PARTITION AND DOOR AT CERTAIN

Amount

Taking down cement or cement lime plaster any description on any walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

M&L for rendering CM (1:6) 10 mm thick on other than fair faces of brick work or concrete surfaces etc including finished even and smooth without using extra cement up to four storey height bldg in and removing the debries outside the MOD land complete all as specified and directed by Engr In Charge.

M&L rendering 15mm thick in cement mortar 1:4 on other than fair faces of brick work or concrete surfaces finished even and smooth with out using extra cement and removing the debries outside the MOD land complete all as specified and directed by Engr In Charge.

M & L rendering 5mm thick on ceiling in cement mortar 1:3 finished fair and even smooth without using extra cement etc built in cement mortar and removing the debries outside the MOD land complete all as specified and directed by Engr In Charge.

M&L for preparation of new plastered surfaces of walls, and applying two coats of distemper oil emulsion over a coat of primer incl 3mm thick elastomeric wall care putty on walls up to four storey height building complete and specified and as directed by engr-in -charge.

Supply only liquid water proofing compund only complete all as specified and directed by Engr In Charge.

M&L for prepration of old plastered or unplastered surfaces of walls and applying two coat of approved shade of oil emulsion distemper, including repairing of pot holes and cracks with putty, up to four storey height building complete all as specified and directed by Engr-in-Charge.

M&L for preparation on new or previously untreated wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces over putty up to four storey height building complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old plastered or unplastered surface of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surface over putty up to four storey height building complete all as specified and directed by Engineer-in-Charge.

M&L preparation of new plastered or unplastered surface and applying three coats of white wash on ceiling up to four storey height building complete and all as specified and directed by engr-in -charge.

M & L preparation of old plastered surface and applying two coats of white wash on ceiling up to four storey height buildingcomplete and all as specified and directed by Engr-in -Charge.

M&L for two coats of synthetic enamel paint over a coat of priming paint incl preparation of concrete surface old or new exc 10 cm width or girth complete all as specified and as directed by engr in charge

Taking down Chowkats or frames with shutters (without taking off shutters from the frame) area exc 1.5 sqm and not n.exc 4.0 sqm (including make good with CM 1:4 and hold fast) complete all as specified and directed by Engr In Charge.

All as per item No 13 here in before But not exc 1.5 Sqm .

S&F aluminium frame powder coated any colour (minimum thickness of powder coating 50 micron) for doors, windows, partician, ventilators with one or more rebates including joining cleat for fixing etc. including taking down each chowkhats or frames with shutters (without taking off shutters from the frames) complete all as specified.

S&F 12mm thick particle board prelaminated on both sides as in panel of door shutters partition wall, work stations including beading etc.omplete all as specified and directed by Engr-in-Charge.

S&F for powder coated aluminium doors shutters,( thickness of powder coating not less than 50 micron) alumonium section weighing 0.55 kg/m incl necessary joining cleats, glazing clips, rubber neoprene packing , handels 2 Nos in each door , hinges, anodised aluminium snap beading screws etc. complete all aspecified and directed by engr-In-Charge.

S&F aluminium powder coated an (minimum thickness of powder coating 50 micron) as in window and ventilator shutters, sliding type three track, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber packing, anodised aluminum snap beading screws etc. complete all as specified and as directed by Engr-In-Charge.

S&F for Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete and specified and as directed by engr-in -charge.

S&F in repair aluminium deco grills confirming to DG-104 grade all as specified and directed by Engr-In-Charge.

S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification complete all as specified and directed by Engr In Charge.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm prelam PVC Sheet on back face complete all as specified and directed by Engr In Charge.

S&F 150 mm long Aluminium anodised, barrel tower bolts of ex- truded section and fixed complete and specified and directed by engr-in -charge.

S&F 150mm long aluminium handle cast type polished bright complete and specified and directed by engr-in -charge.

S&F 100 mm long butt hinges medium weight, stenless steel, and fixed complete and specified and directed by engr-in -charge.

S&F brass body mortice lock vertical type size 100mm 4 lever, including escutcheon plate and two No keys fixed complete all as specified and directed by Engr-in-Charge.

S & F in repair aluminium extruded section door closer hydraulically operated designation No-03, universal type, suitable for door shutters of 851 to 1000mm width and of weight of 61 to 80 Kg complete all as specified and directed by Engr In Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.complete all as specified and directed by Engr In Charge.

M&L Glazed ceramic coloured tiles in vertical surface 300X 450X 7-8 /300x600x7-8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match incl back plaster 10 mm thick in cm 1:4 complete all as specified and directed by Engr In Charge.

M&L Virified Ceramic tiles 9 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar (1:4) omplete all as specified and directed by Engr In Charge.

All as per item No 31 here in before but as on vertical surface of wall such as skirting/dado incl 10mm thick cement plaster (1:4) as in backing coat of tiles

M&L for non skid ceramic joint free coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.11 Sqm but n. exc 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM(1:6) complete all as specified and directed by Engneer-in-Charge.

M&L Granite 18-20 mm thick(of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite( including moulding ect) complete all as specified and

S & F for 25 mm dia anodised aluminium alloy with powder coated curtain rod including all necessary fixing arrangement like clamps, end brackets, end to end bracket and eight nos rings per meter complete all as specified and directed by Engr In Charge.

Material and labour for false ceilings using GI sanp grid system with rool-formed out of hot drip galvanised steel capings (Powder coated) main runner 38x24mm, cross Tee 29x24mm and wall angle 24x24mm members suspended with 4mm dia GI wire, carry maximum load up to 8.10 Kg/Sqm with 4mm thick designer ceilimg board, prepainted cement fibre board size 595x595x4mm thick any texture (Lake, Hill, ocean cascade or Electra ) suspended from from RCC roof/ structural members of soofits angle cleat cut out etc to ther equired line and shape as per manufactureres recommndations at any height and including dismentling complete all as specified and as directed by GE, Everest ceiling and grid system Regular T-2430 or its equivalent.

M &L for PVC profile for wall panelling colour / shade as approved size 250mm wide, 08 mm over all thick with 1 mm wall thickness fixed with screw to mild steel square ( size 20mmx 20mmx 1mm thick) tubler frame work including one coat of red oxide primer, fixed to walls and including dismentling complete all as specified and directed by Engr-in-Charge.

Demolition of brick work or stone/boulder masonry built in cement mortar complete all as specified and directed by Engr In Charge.

M&L Brickwork with sub- class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed by Engr In Charge.

Taking down steel tubing or removing from site of 15mm bore pipe all as specified and directed by Engineer-in-charge.

All as per item No 40 here in before but 20mm bore.

S&F for 15mm bore steel water tubing medium grade , galvanized ISI marked with all fittings fixed to wall & ceiling or laid in floors complete all as specified and directed by Engineer-in-charge.

All as per item 42 here in before but 20mm bore

Dismantling water tanks exc 500 but not exc 1000 ltrs capasity and removing to store complete all as specified and directed by Engr In Charge.

S&F Rotational moulded polyethylene 1000 Ltr water storage tanks as per IS (cylindrical vertical with closed top) hoisted and fixed in position including necessary fittings complete all as specified and as directed by Engr-in-Charge.

S &F for 20 mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe orr brass errule and fixed complete all as specified and directed by Engr In Charge.

Taking down rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed by Engr In Charge.

S&F PVC (SWR) pipes 110 mm single socketed, in any length with solvent cement joints fixed to walls/laid in floors incl stack clamps of stainless steel with bolts & nuts etc complete all as specified and directed by Engr In Charge.

All as per item No 48 here in before But 75 mm dia.

S&F in repairs for 75 mm dia pvc pipe Stack clamps out of 50 mm by 5mm flat iron and 16mm dia round iron stays,enlcuding bolts and nuts and securing ends of stays to wall or roof as percomplete all as complete all as specified and directed by Engr In Charge.

S&F in repairs for 110 mm dia pvc pipe Stack clamps out of 50 mm by 5mm flat iron and 16mm dia round iron stays,enlcuding bolts and nuts and securing ends of stays to wall or roof as per complete all as specified and directed by Engr In Charge.

S&F in repair PVC (SWR) bends 100 mm complete all as specified and directed by Engr In Charge.

S&F in repair PVC (SWR) bends 75 mm complete all as specified and directed by Engr In Charge.

S&F in repair PVC (SWR)Junction piece 75 mm double (Double T) provided with access door equal or unequal complete all as specified and directed by Engr In Charge.

S&F in repair 110 mm PVC (SWR) Junction single (Single T) provided with access door complete all as specified and directed by Engr In Charge.

S&F in repair PVC (SWR) vent cowl of size 110 mm complete all as specified and directed by Engr In Charge.

S&F in repair PVC (SWR) vent cowl of size 75 mm complete all as specified and directed by Engr In Charge.

Supplying and fixing in repair for vitreous china wash down water closet pan, white (pedestal pattern), including plastic water closet seat, black/white, closed pattern with recessed bottom and cover and mild steel chromium plated or aluminised hinging device, excluding fixing bolts, flushing cistern and flush pipe) complete all as specified.

S&F in repair PVC SWR floor trap including jointing with solvent cement 75 mm dia complete all as specified and directed by Engr In Charge.

S&F in repairs10 ltr capacity PVC flushing cistern coloured with accessories Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete and specified and directed by engr-in -charge.

M&L for 5mm thick frame less mirror with chromium plated brass clam screws and cup washers or fixing arrangement to wall in repairs complete all as specified and directed by Engr In Charge.

S & F in repairs for 125mm dia Stainless steel grating doom with waste hole for waste pipe ( minimum weight 40 gram) complete all as specified and directed by Engr In Charge.

S&F in repair gun metal globe balve ot gate valve with mild steel iron wheel head, screwed both ends for iron pipe & fifed for 20 mm bore complete all as specified and directed by Engr In Charge.

S & F in repairs 15mm CP two way bib tap cromiun plated copper alloy with crutch or butterfly handle , screwed down, screwed for iron pipe etc complete all as specified and directed by Engr In Charge.

M&L in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cemen complete all as specified and directed by Engr In Charge.

S&F in repair CP stop valve /angle valves, cast copper alloy, fancy type, chromium plated with long shank & cup (concealed type) with crutch or butterfly handle, screwed both ends for iron pipe of 15 mm bore complete all as specified and directed by Engr-In-Charge.

S&F in repairs CP tubular Towel rail , 20 mm dia, D Type 600mm long between flanges brass chromium plated with screws and cleats, (Minimum weight 190 gms) complete all as specified and directed by Engr In Charge.

S&F in repairs soap dish, Steelness steel approximate size 160x160x90mm fixed to plugs with chromium plated brass screws etc complete all as specified and directed by Engr In Charge.

S&F 15mm dia PVC Connection 450 mm long with nuts complete all as specified and directed by Engr In Charge.

S&F in repairs vitreous china wash hand basin bowl type of size 550mm x 400mm white, flat back including angle iron brackets including PVC waste pipe of 32mm dia of suitable length, and 32mm dia brass waste fitting complete all as specified and directed.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S &F Toilet paper holder with flat recessed type stainless steel complete all as specified and directed by Engr-In-Charge.

S & F in repairs 32mm dia Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap complete all as specified and directed.

S&F in repair 15 mm pillar taps swan neck cast copper alloy, with capstan heads, chromium plated screwed down high pressure, with or without lettered "Hot" or Cold with long screwed shanks and fly nuts screwed for iron pipes and fixed , fancy type complete all as specified and directed by Engr-In-Charge.

S&F in repair glass shelf assembly consisting of 5.5 mm thick sheets glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed by Engr-In-Charge.

Excavation in hard /dense soil in trenches not exc 1.5 m wide and not exc 1.5m depth and getting out, complete all as specified and directed by Engr-in-charge.

Returing, filling in including spreading, leveling, watering and well ramming in layers not exc 25cm complete all as specified and directed by Engr-in-Charge.

Removing excavated material exc. 1.50 km but n exc. 5 km and depositing where directed . complete all as specified and directed.

M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6 M mean radius built in CM 1:6 complete all as specified and directed.

M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundations filling and mass concrete complete all as specified and directed

M&L for rendering CM (1:6) 10 mm thick on other than fair/rough faces of brick work or concrete surfaces etc including finished even and smooth without using extra cement complete all as specified and directed by Engr In Charge.

M&L for rendering CM (1:6) 15 mm thick on other than fair faces of brick work or concrete new surfaces etc including finished even and smooth without using extra cement complete all as specified and directed by Engr In Charge.

M&L cement concrete type B1 1:2:4 (using 12.5 mm graded stone aggregate) as in copings complete all as specified and directed

M&L for Form work to sofits of suspended slab such as roof slab, floor slab, landing and similar work not exc 200mm thick. complete all as specified and directed.

M&L for providing pre-cast cement concrete as in landing beam, cover slabs chullah hoods, chajjas, water troughs, mangers, shelves and similar items with plain faces in cement concrete 1:2:4 type B-1, using 20 mm graded stone aggregate and setting in cement mortar 1:4 complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.90mm dia or securing with clips, complete all as specified and directed

All as per item No 86 here in before but 8 mm dia in stirrups,spacer and binder

M & L for 75 mm thick PCC 1:3:6 type C2 as in Plinth Protection using 40 mm stone aggregate including making joints & filling with sand bitumen mastic as per complete all as specified and directed by Engr In Charge.

M&L Granite (of any type) tiles 20mm (+-2mm) thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including moulded ofnedges grinding and polishing complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old surface and applying two coat of oil bound distemper white or tinted on Ceiling complete all as directed and specified.

Material & labour for preparation of new plastered surfaces and applying two coat of exterior grade modified antifungal water based weather proof acrylic emulsion dirt cleaning property paints on wall, fins, facias, chajjas over a coat of primer incl 3mm thick wall care putty etc complete all as specified and as directed by the Engr-in-Charge.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.complete all as specified and directed by Engineer-in-Charge.

M&L for point wiring one light point controlled by one switch with 1.5 sqmm single core PVC insulated, unsheathed FRLS 1100 Volt grade multistranded copper conductor cable drawing through rigid non metallic PVC conduit , medium grade, ISI marked ( not less than 20 mm dia) complete including all acessories concealed wiring on wall and surface on ceiling terminated in and including ms sunken box covered with3 mm thick laminated top sheet cover along with provn of earth wire PVC insulated, unseathed, 1100 V grade cable multi stranded FRLS, ISI markd copper conductor of size 1.5 sqmm all as specified and directed by Engr-in-Charge. (Note : Cost of for cutting chaising and making good to disturbed surface all as to match with existing surface are deemed to be included in quoted rate.)

All as per item No 93 here in before but One C/ fan/Exhaust fan/wall fan point controlled by one switch.

All as per item No 93 here in before but for one 3 pin 5 amps socket outlet on independent board.

All as per item No 93 here in before but for one 3 pin 5 amps socket outlet on the same board with other switchs.

All as per item No 93 here in before but with 2.5 Sq mm cable for Independent bd one 3 pin 15 Amps socket outlet including single core 2.5 Sq mm PVC insulated copper conductor unsheathed 1100 v grade IS -694 FR LS cable for continuous earth wire.

Supply and fix MCB DB SPN with two pin and earth plug and socket 20 Amps compete with one SP MCB 20 Amps fixed flush in wall including cutting chases in wall for fixing DB and making good the disturbed wall surface to match with existing specification.

S&F switch piano flush type, single pole, one way 5 amps, 240 volts complete all as specified and as directed.

S&F switch piano, flush type single pole, one way, 15 Amps, 240 volts complete all as specified and directed.

S&F socket outlet 5 pin 5 Amps complete all as specified and directed.

S&F Socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type complete all as specified and directed.

Supply and fixing ceiling roses, surface bakelite 65x50mm ,3 terminals 3 phase, PVC/Polycarbonate, isolated body complete all as specified and directed.

Fixing only LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed by Engineer-in-Charge.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cables of suitable size complete all as specified and directed by Engineer-in-Charge.

Supply and fixing LED lights fitting 1x 20W 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to fitting complete all as specified and directed.

Taking down Ceiling fan of any size Complete all as specified and directed by Engineer-in-Charge.

Hanging only ceiling fan (M.D. supply) and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed.

Supply and fix ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep, with Squirrel cage induction motor complete all as specified and directed.

M & L for submain wiring with two run of single core 10.0 sqmm PVC insulated but unsheathed FRLS cable of specified size of multistranded copper conductor 1100 volts grade IS:694 marked and one run of 6.0 sqmm PVC insulated but unsheathed FRLS cable for earth continuty conductor drawn through and under suitable size of rigid non metallic PVC conduit , medium grade, ISI marked ( not less than 20 mm dia) complete with all acessories and fittings all laid/fixed concealed in wall/ceiling or surface in wall and surface conduit on ceiling, and also include the specified runs of specified size earth continuity conductor of similar type cable complete all as specified and directed. Note:-2 Runs of 10.0 Sqmm single core and one run of 6.0 sqmm single core cable for earth continuity conductor and one run of pvc pipe shall be measuared as one unit for payment purpose.

Supply and fixing in replacement MCB distribution board with Bus bar 200A neutral link , earth bar made out of CRCA mild steel sheet surface mounting SPN 12 way 230 volts double door type regal gray horizontal type complete all as specified and as directed by Engineer-in-Charge. Note :- MCB shall be measured and paid seperately.

Taking down unserviceable SP/SPN MCBs of any capacities from the existing DBs after disconnecting the electric supply complete all as specified and directed.

S&F MCB SP 5 to 32 Amps 10 KA, 240 volt 'C' Series complete all as specified and directed by engineer-in-charge.

S&F MCB SP 40 Amps 10 KA, 240 volt 'B' Series complete complete all as specified and directed by engineer-in-charge.

S&F MCB SPN 40 Amps 10 KA, 240 volt 50 Hz 'C' Series complete all as specified and directed by engineer-in-charge.

shakti construction (BID ID -3347033)

SM CONSTRUCTION COMPANY (BID ID -3347038)

M/s. Kansal Construction Co. (BID ID -3346942)

shiva enterprises (BID ID -3347229)

Ashish Sehgal and Co. (BID ID -3347010)