Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.4 LAccepted-AOC | L1 | Accepted-AOC Found lowest | |
| 2 | L2₹28.7 L+₹2.4 L (9.06%)Rejected-Finance | L2 | Rejected-Finance Not Found lowest | |
| 3 | L3₹28.8 L+₹2.4 L (9.16%)Rejected-Finance | L3 | Rejected-Finance Not Found lowest | |
| 4 | L4₹30.9 L+₹4.5 L (17.2%)Rejected-Finance | L4 | Rejected-Finance Not Found lowest | |
| 5 | L5₹31.6 L+₹5.3 L (20.0%)Rejected-Finance 29 MODEL TOWN BEHIND GURUDWARA PATHANKOT | PATHANKOT | PATHANKOT | PUNJAB | 145001 | L5 | Rejected-Finance Not Found lowest |
| Sl No | Description | Qty | Unit | M/S V K TRADERS L4 | kailu construction co L5 | KULBHUSHAN AGGARWAL L2 | M/S SINGH AND ASSOCIATES L7 | Ms International Engineers L6 | Ashoka Engineers L3 | Standard engineers L1 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Excavation in trenches not exceeding 1.5m width and not exceeding 1.5 m in depth and getting out in soft/loose soil for taking up/laying cable/pipe etc complete all as apecified and directed. | 37.5 | Cum | 150 ₹5,625 | 150 ₹5,625 | 100 ₹3,750 Lowest | 150 ₹5,625 | 150 ₹5,625 | 120 ₹4,500 | 100 ₹3,750 Lowest |
| 2.00 | Returning, filling in, including spreding, leveling watering & well ramming in layers not exceeding 25cm complete all as apecified and directed. | 36 | Cum | 150 ₹5,400 | 110 ₹3,960 | 50 ₹1,800 Lowest | 150 ₹5,400 | 150 ₹5,400 | 60 ₹2,160 | 50 ₹1,800 Lowest |
| 3.00 | Removal of excavated material at a distance not exc 50 mtr and dipositing where directed at a level not exc. 1.5 mtr above the starting point complete all as apecified and directed. | 1.47 | Cum | 150 ₹220.5 | 100 ₹147 | 50 ₹73.5 Lowest | 150 ₹220.5 | 150 ₹220.5 | 60 ₹88.2 | 50 ₹73.5 Lowest |
| 4.00 | Supply laying , jointing and testing of Ductile Iron pipe, sockets and spigot end, class K - 7 of 100mm dia (4") ISI marked, including special fittings suitable for push on jointing with inside cement mortor lining, external metallic zinc coating followed by finishing layer of black bitumen coating, pipe laid in trenches, joints and jointing materials as per OEM specifications and testing including taking out old unserviceable DI pipe complete all as specified and directed of Make : Electro steel/Jindal/Kesoram
Note:- Joints, excavation and earth work and fittings shall be measured and paid separately. | 125 | RM | 3,200 ₹4,00,000 | 1,950 ₹2,43,750 Lowest | 2,500 ₹3,12,500 | 3,200 ₹4,00,000 | 3,200 ₹4,00,000 | 2,500 ₹3,12,500 | 2,250 ₹2,81,250 |
| 5.00 | S&F in repair Automatic Star Delta Submersible Starter DLX (with short-circuit Protection) - HGS Series for 25 HP submersible Motor pump, relay range 12 to 30 Amp fixed at exisiting place and testing including taking down of existing old burnt startor complete all as specified and directed.
Make : Havells/L&T | 2 | Each | 42,000 ₹84,000 | 45,000 ₹90,000 | 36,500 ₹73,000 | 42,000 ₹84,000 | 42,000 ₹84,000 | 35,000 ₹70,000 Lowest | 45,000 ₹90,000 |
| 6.00 | S&F in repair Automatic Star Delta Submersible Starter DLX (with short-circuit Protection)- HGS Series for 50 HP submersible Motor pump, relay range 34 to 60 Amp fixed at exisiting place and testing including taking down of existing old burnt startor complete all as specified and directed.
Make : Havells/L&T | 2 | Each | 51,000 ₹1,02,000 | 75,000 ₹1,50,000 | 55,000 ₹1,10,000 | 51,000 ₹1,02,000 | 51,000 ₹1,02,000 | 45,000 ₹90,000 Lowest | 65,000 ₹1,30,000 |
| 7.00M&L for cleaning of under mentioned RCC over head reservoir, under ground sump/semi under ground sump of any size and any height of staging by using mechanical means and scientific cleaning by carrying out the following stages of cleaning process for disinfection of surfaces:- a) Cleaning of all external area around the tank by removal bushes/grass, leveling of surface all around 5 Mtr of water sump/OH tank.(b) The inner surface of the walls and ceilings of the tank shall be cleaned with high pressure jet pump after dewatering in the tank. (c) After thorough cleaning of the tank, removal of algae calcination and other dust particles with high pressure including hot water treatement @ 50 degree centigrade. (d) Vacum cleaning and sludge shall be removed by using pump and the sludge has to be disposed off at a places as directed. (e) After removing the sludge from tank, the floor and inner surfaces of the tank shall be cleaned by using an industrial vaccum cleaner and the tank shall be made fully dust free and disinfection with bio-degradable chemical/anti bacterial spray and surfaces to be proven non toxic. (f) After the treatment as mentioned at (e) above, the inner surface of walls and ceiling shall be treated with UV Radiation/Ozonization with UV rays. (g) After complete treatment is carried out, all inlet, over flow, delivery, wash out pipes, ladder and doors shall be painted with two coats of synthetic enamel black paint after thorough cleaning the surfaces and also the surfaces of sluice valves shall be painted with P.O. Red paint and writing "capacity of tank, date of cleaning and due date of cleaning" on walls as specified and as directed. (h) The wire mesh of ventilaters of the tank shall be replaced with new GI wire mesh. (j) writing date of cleaning and due date (k) The PCC work where as required | ||||||||||
| 7.01 | underground/semi under ground RCC reservoir of capacity up to 50000 gallons | 1 | EACH JOB | 23,500 ₹23,500 | 9,500 ₹9,500 Lowest | 15,000 ₹15,000 | 23,500 ₹23,500 | 23,500 ₹23,500 | 20,000 ₹20,000 | 10,000 ₹10,000 |
| 7.02 | RCC overhead reservoir of capacity upto 50000 gallons at 30 to 20 metre staging, | 4 | EACH JOB | 16,700 ₹66,800 | 9,500 ₹38,000 Lowest | 15,000 ₹60,000 | 16,700 ₹66,800 | 16,700 ₹66,800 | 14,000 ₹56,000 | 10,000 ₹40,000 |
| 8.00 | Supply and fix in repair for submersible cable flat copper conductor 16 sq mm, 3 core, 1100 volts complete al as specified and directed. | 150 | RM | 1,200 ₹1,80,000 | 900 ₹1,35,000 Lowest | 1,250 ₹1,87,500 | 1,200 ₹1,80,000 | 1,200 ₹1,80,000 | 980 ₹1,47,000 | 1,000 ₹1,50,000 |
Tender Value
₹28 L
EMD Value
₹56,000
Closing Date
18 Aug 2025, 6:00 pmClosed
Lt Col Nitin Bisht
GE Basoli PO Lakhanpur Distt Kathua (JK) 184152
GE/BAS-54/2025-26 Repair/improvement/overhauling to submersible pump, centrifugal pump, monoboook pump, VT pump, rewinding of motor, starter and cleaning of OHT/UG sump and connected allied work at Janglote station under GE Basoli
2025_MES_722999_1
GE/BAS-54/2025-26
Open Tender
Civil Works
Item Rate
330 days
Janglote station under GE Basoli
As per tender docs
8 documents required · 8 mandatory
₹500
GE Basoli
₹56,000
Yes
6 Sept 2025
28 Jul 2025
20 Aug 2025
28 Jul 2025
18 Aug 2025
11 Aug 2025
Amount
Excavation in trenches not exceeding 1.5m width and not exceeding 1.5 m in depth and getting out in soft/loose soil for taking up/laying cable/pipe etc complete all as apecified and directed.
Returning, filling in, including spreding, leveling watering & well ramming in layers not exceeding 25cm complete all as apecified and directed.
Removal of excavated material at a distance not exc 50 mtr and dipositing where directed at a level not exc. 1.5 mtr above the starting point complete all as apecified and directed.
Supply laying , jointing and testing of Ductile Iron pipe, sockets and spigot end, class K - 7 of 100mm dia (4") ISI marked, including special fittings suitable for push on jointing with inside cement mortor lining, external metallic zinc coating followed by finishing layer of black bitumen coating, pipe laid in trenches, joints and jointing materials as per OEM specifications and testing including taking out old unserviceable DI pipe complete all as specified and directed of Make : Electro steel/Jindal/Kesoram Note:- Joints, excavation and earth work and fittings shall be measured and paid separately.
S&F in repair Automatic Star Delta Submersible Starter DLX (with short-circuit Protection) - HGS Series for 25 HP submersible Motor pump, relay range 12 to 30 Amp fixed at exisiting place and testing including taking down of existing old burnt startor complete all as specified and directed. Make : Havells/L&T
S&F in repair Automatic Star Delta Submersible Starter DLX (with short-circuit Protection)- HGS Series for 50 HP submersible Motor pump, relay range 34 to 60 Amp fixed at exisiting place and testing including taking down of existing old burnt startor complete all as specified and directed. Make : Havells/L&T
M&L for cleaning of under mentioned RCC over head reservoir, under ground sump/semi under ground sump of any size and any height of staging by using mechanical means and scientific cleaning by carrying out the following stages of cleaning process for disinfection of surfaces:- a) Cleaning of all external area around the tank by removal bushes/grass, leveling of surface all around 5 Mtr of water sump/OH tank.(b) The inner surface of the walls and ceilings of the tank shall be cleaned with high pressure jet pump after dewatering in the tank. (c) After thorough cleaning of the tank, removal of algae calcination and other dust particles with high pressure including hot water treatement @ 50 degree centigrade. (d) Vacum cleaning and sludge shall be removed by using pump and the sludge has to be disposed off at a places as directed. (e) After removing the sludge from tank, the floor and inner surfaces of the tank shall be cleaned by using an industrial vaccum cleaner and the tank shall be made fully dust free and disinfection with bio-degradable chemical/anti bacterial spray and surfaces to be proven non toxic. (f) After the treatment as mentioned at (e) above, the inner surface of walls and ceiling shall be treated with UV Radiation/Ozonization with UV rays. (g) After complete treatment is carried out, all inlet, over flow, delivery, wash out pipes, ladder and doors shall be painted with two coats of synthetic enamel black paint after thorough cleaning the surfaces and also the surfaces of sluice valves shall be painted with P.O. Red paint and writing "capacity of tank, date of cleaning and due date of cleaning" on walls as specified and as directed. (h) The wire mesh of ventilaters of the tank shall be replaced with new GI wire mesh. (j) writing date of cleaning and due date (k) The PCC work where as required
underground/semi under ground RCC reservoir of capacity up to 50000 gallons
RCC overhead reservoir of capacity upto 50000 gallons at 30 to 20 metre staging,
Supply and fix in repair for submersible cable flat copper conductor 16 sq mm, 3 core, 1100 volts complete al as specified and directed.
Supply and fix in repair for submersible cable flat copper conductor 25 sq mm, 3 core, 1100 volts complete al as specified and directed.
Supply and fix for MS coloum pipe heavy duty with flanged welding of size 100 mm dia having length 10 feet (3 mtr) long including taking out old unsv MS coloum pipe from bore well complete al as specified and directed.
Supply and fix for MS coloum pipe heavy duty with flanged welding of size 125 mm dia having length 10 feet (3 mtr) long incl taking out old unsv MS coloum pipe from bore well complete all as specified and directed.
Supply and fix for MS coloum pipe heavy duty with flanged welding of size 80 mm dia having length 10 feet (3 mtr) long incl taking out old unsv MS coloum pipe from bore well complete al as specified and directed.
Labour only for Disconnecting the existing non functional submersible pump set from electric supply from panel, dismantling existing CI bend from non return valve, removing and lifting out submersible pump set of any description and capacity upto 30/40 HP and in any position, along with existing column pipe 100mm dia and existing submersible cable of any size from the bore well (approximately 450 feet depth of pump set from GL) and staking the pump and column pipes near by the bore well for inspection complete all as specified and directed. NOTE: - Contractor shall take proper precautions while lifting out and removing pump set from bore well so as to avoid any damage to column pipe and submersible cable. All necessary T&P and equipments required for lifting out pump set etc. shall be arranged by the contractor at his own cost. (ii). Number of column pipe may vary from 30 to 50, The existing pipes & flanged joints shall be checked for its serviceability & unserviceable joints along with flanges shall be removed from the column pipe by cutting the pipes & making new thread in pipes for fixing of new flange joint, the cost of same shall be deemed to be included in the quoted rate for above item. However cleaning of pipes if any required shall be measured & paid separately.
Labour only for Lowering down of the submersible pump set of any description and any capacity upto 30/40 HP and in any position, in bore well along with column pipe 100 mm dia and submersible cable of any size (approximately 450 feet depth of pump set from GL) complete all as specified and directed including making necessary electric connections & testing the pump set after lowering complete all as specified and directed.
Repair/maint of unsv submersible pumping set 15 to 40 HP of capacity from bore well and dismantling and strip opening submersible pump upto 10 stages at site in presence of Engineer-in-charge for checking complete and minor repair at site by replacing minor spares such as servicing, cleaning, greasing etc. and for major repair, carrying pump set to workshop for replacement parts/spares such as CI/GM impeller, necking bowl bushes, sand cap, CI intermediate bowl, s/s pump shaft etc including reassembling, testing at site on full load to entire satisfaction. Notes :- Parts shall be measured and paid separately as per required basis during repair of submersible motor
Motor bearing bush (LB)
Thurst bearing set
Impeller
Stage casing
Section bush
Pump NRV
Discharge out let Bush LB
Discharge out let.
Middle bush LB
SS sleeves
Pump servicing
Neck ring stage casing
Sand guard
Oil sealing
Repairs/overhauling of centrifugal pump assembly after disconnecting existing water supply pipe line and electric connection from 40 HP motor and transporting to work shop opening the pump and replacement of unserviceable worn out parts refixing, overhaualing, reassmbling and alignment with replacement of unserviceable parts and refixing the same back to pump house plat form including testing all as per the direction of engineer in charge. Note:- (i) New part of pump shall be measured and paid seperatly. (ii) Supply only following spare part of 40 HP centrifugal pump.
Supply only Pump shaft
Supply only Oil seal
Supply only Gasket
Supply only Bearing
Supply only pump coupling
Supply only Terminal block
Supply only Impeller
Supply only PVC fan
Supply only Gland rope
Dismantaling and step opening of burnt out electric motor of capacity 40 HP of and rewinding with supper enameled copper wire of existing gauge, number of turns, insulating and heat varnishing, greasing complete including replacement of bushes, bearing check nut, and other required parts and applying two coats of synthetic enamel paint over a coat of red oxide primer to external surface of motor and testing complete all as specified and directed.
Repairs/overhauling of centrifugal pump assembly after disconnecting existing water supply pipe line and electric connection from 10 HP motor and transporting to work shop opening the pump and replacement of unserviceable worn out parts refixing, overhaualing, reassmbling and alignment with replacement of unserviceable parts and refixing the same back to pump house plat form including testing all as per the direction of engineer in charge. Note:- (i) New part of pump shall be measured and paid seperatly. (ii) Supply only following spare part of 40 HP centrifugal pump.
Supply only Pump shaft
Supply only Oil seal
Supply only Gasket
Supply only Bearing
Supply only pump coupling
Supply only Terminal block
Supply only Impeller
Supply only PVC fan
Supply only Gland rope
Dismantaling and step opening of burnt out electric motor of capacity 10 HP of and rewinding with supper enameled copper wire of existing gauge, number of turns, insulating and heat varnishing, greasing complete including replacement of bushes, bearing check nut, and other required parts and applying two coats of synthetic enamel paint over a coat of red oxide primer to external surface of motor and testing complete all as specified and directed.
Rewinding the submersible pump motor 30/40 HP of any make with PVC insulated heavy duty copper winding wire of same gauge and number of turns by using minilex fiber insulating sheet and sleeves etc omplete including replacement of bushes, bearing check nut, and other required parts and applying two coats of synthetic enamel paint over a coat of red oxide primer to external surface of motor and testing complete all as specified and directed.
Rewinding the submersible pump motor 15/25 HP of any make with PVC insulated super enameled heavy duty copper winding wire of same gauge and number of turns by using minilex fiber insulating sheet and sleeves etc omplete including replacement of bushes, bearing check nut and other required parts and applying two coats of synthetic enamel paint over a coat of red oxide primer to external surface of motor and testing complete all as specified and directed.
Supply and fixing in replacement thermal over load relay suitable for oil immersed star delta starter for submersible pumps of rating 15 to 25 HP matching with existing sample including connections with existing star delta starters complete all as specified and directed.
Supply and fixing in replacement thermal over load relay suitable for oil immersed star delta starter for submersible pumps of rating 30 to 40 HP matching with existing sample including connection with existing star delta starter complete all as specified and directed
Supply and fixing in replacement single phase prevention relay suitable for star delta starters, of capacity upto 40 HP, with auto, mannual and bypass operation, with time delay setting including wiring and connection with existing star delta starter complete all as specified and directed.
Supply and fixing in replacement electronic timer suitable for star delta starters, having coil voltage 380 to 415 volts, with time delay 3 to 30 seconds, complete including wiring and connections with existing star delta starter complete all as specified and directed.
M&L for painting of water supply panel with spray painting outside the panel complete all as specified and directed.
Flushing of existing borewells of size 150 mm dia, 150 Mtrs depth with drilling compressor including surging and flushing the bore at a pressure of 7 Kg / Sq cm complete with compressed air and flushing the sand, mud etc from the bore well till discharge of the fresh water, including testing of water samples for chemical and bacteriological tests and yield testing for 8 hours complete all as specified and directed.
Material and labour for MS work for rail/grills inside shaft/around the dome, dome cover and MS ladder inside/out side the OHR and post /gate for fencing by using suitable size of MS angle iron, bars, flat iron, mild steel sheet etc. complete including cutting, welding, riveting, locking arrangement and including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed
Supply and installing of water level indicator electronic type suitable for over head reservoirs including PVC copper cable 0.5 sqmm 10 core , digital display board in pump houses ,water level sensor 07 Nos including taking out old unserviceable water level indicator complete all as specified and directed.
S&F integral LED avation light comprising of aluminium housing with polycorbonate enclosure with fixed in position on over head tank minimum height 25 metre staging with all fixing accessories with 2.5 sqmm copper conductor with PVC pipe fixed on wall from nearest supply to aviation light including taking down old unsv light fitting complete all as specified and directed.
Material and labour for detecting and repairing the leakage in already fixed inlet/outlet pipe of dia 100mm/150mm at OHR including necessary arrangments i.e. welding work,scaffolding, JCB, Hydra, Chain pulley etc. Note:- (i) Contractor shall depute Labour/Pipe Fitter and other require equipments such as JCB/Tractor/Hydra and Fuel etc. to attend complaint traced out. Complete site for attending the leakage shall not be handed over to contractor at a time. Site of leakage only handed over to the contractor on site requirement basis. If leakage again found during the currency period of contract at the repaired location contractor shall repair again without any extra cost in terms of condition 46 of IAFW-2249 of General condtion of contracts. Contractor shall provide equipments like JCB/tractor/Hydra etc. and fuel at his own cost and arrangement for rectifying the complaint as per site requirement and nothing extra shall be paid on this account. CI / DI fittings and run lead joints shall be included in this item. (ii)Welding work if required shall be included in this item and nothing shall be paid extra on this account. (iii) Provision of Scaffolding and necessary T&P shall be provided by the contractor in this item and nothing shal be paid extra on this account.
Repair to spindle of sluice valve 150 mm dia by opening the top of sluice valve and taking out the unserviceable spindle with nut and fixing new brass spindle with nut and refixing the same in original position including nut bolt washers and rubber sheet complete all as specified and directed.
Taking out old unserviceable sluice valve and supply and fix new cast iron sluice valve of over head tank any type of 150 mm dia PN 1.6 grade with stainless steel spindle & brass check nut (non raising spindle type conforming to IS - 14846) including fixing to pipe line with nuts, bolt and washers, rubber gaseket(neouprene) complete all as specified and directed. (NOTE:- cost of, scaffolding, JCB, Hydra, Chain pulley etc included in quoted rates no extra cost paid to the contractor)
Supply and fixing in repair stainless steel glycerine pressure gauge of capacity upto 25kg/cm2 in pipeline of different size complete all as specified and directed.
M & L for attending break down of water supply pipe line and repair to CI/DI water mains of size 100 mm to 150 mm dia at a given notice including necessary excavation in mud, in any type of soil by manual or using special T &P such as JCB etc. De-watering from the trenches by using pump sets, rectification of leakages, fixing of CI specials/DI-joints such as collars bends/tail peaces etc and making joints complete all as specified and directed. Note:- CI specials, lead Joints, D-Joints, Clamp joints etc required shall be included in this item.
M&L for Servicing of complete all water supply panel by cleaning of all parts with anti rust spray, replacing of nuts & bolts, washers with suitable lugs of burnt/rust contacts & fitting of screws & rewiring with suitable guage copper conductor/flexible wires, all as required as per ground conditions, with tightening of all loose parts with testing complete on load all as specified and directed.
Supply and fix digital Voltmeter for panel of existing make and size complete all as specified and firected.
Supply and replacement of pump house sign board made of ACP sheet 90 cm x60 cm and 3mm thick alongwith radium tape for printing text (No of letters decided by Engineer -in-charge) on one side and fixed on 40x40 mm square tubing frame and board grouting 1.5m above ground including PCC (1:4:8 ) C-2 complete all as specified and directed.
M&L earthing complete with galvanised steel earth plate eletrode 600mmx600mm and 6mm thick buried directly in ground earth pit not less than 2.25mtr deep below normal ground level with top edges, of the plate not less than 1.5m below normal ground level, connected to the Galvanise Iron earth lead 32mmx6mm (GI Strip) size, by means of bolts, nuts, check buts and washers of galvanised iron and 32mmx6 mm earth lead protected by provision of GI medium grade pipe 40 mm bore including provision of aggregates with 40 mm thick cover of RCC (1:2:4), reinforced with XPM (weight not less than 4 kg per sqmm) and frame of angle iron 40mmx40mmx3mm and with 6 mm dia MS bar handle made to shape, GI light grade 20mm bore pipe of suitable length for watering perforated at bottom placed on top edged of earth plate, common salt and charcoal filling, funnel, wire mesh and earth work in hard/dense soil, returning filling in distance not exceeding 50 mtr and removal of surplas soil to plate No 3 of SSR 2009 Part-I and connecting to feeder pillers and Transformer all as specified including testing on completion complete all as specified and directed.
Repair to reciprocating pump chemical feeder for injecting calcium hypochloride employing including replacement of operating reciprocating chemical system having output of 10-150 LPD and adjustable high pressure of upto 5-7 Kg/cm with high pressure single head gear system adjustable dozing pump, suitable for working on single phase supply with replacement of mandatory accessories like lead tubing, connecting nuts, viay weight, ferrulus, liquid end of dozing system including unsv service tanks of cap 100Ltrs complete in all respect all the parts shall be replaced as per norms of OEM and after repair testing will be carried out in the presence of Engr-in charge complete all as specified and diected.
Supply only Granular Calcium hypo chlorite 65% - 70% chlorine content packed in 45 Kg drum complete as directed. Make:- Auafit/ALTOC/RAMCO/DECLIBAC/ TECHNOMAC/ MILTON ROY
KULBHUSHAN AGGARWAL (BID ID -3397859)
Ashoka Engineers (BID ID -3397151)
M/S V K TRADERS (BID ID -3397608)
kailu construction co (BID ID -3397627)
Ms International Engineers (BID ID -3398083)
M/S SINGH AND ASSOCIATES (BID ID -3397613)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .