REPAIR REPLACEMENT OF PLASTER, FLOORS , JOINERY , CHUJJA , SUNKEN REPAIR , PLUMBING AND ALLIED SERVICES AT SALARIA ENCLAVE, PIRU SINGH ENCLAVE AND ADJACENT AREA UNDER AGE B/R-II OF GE (NORTH) MEERUT CANTT

Amount

Taking down chowkhat or frames of door/ window with shutters (Without taking off shutter from the frame) exc 1.50 m and n.exc 4.00 Sqm each and refixing, resecuring , restraining in same opening making good disturbed surface done with a mix of mortar or concrete not leaner than cement mortar 1:2 or PCC 1:2:4 type B1 and to the satisfaction of Engr-in- charge and as per site requirment complete all as specified and directed.

Taking down shutter of any description exc 1sqm but n.exc 2 sqm each complete all as specified and directed.

S&F 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed..

Taking down chowkhat with shutters( without taking of shutter from the frames) not exc 1.5sqm each complete all as specified and directed.

S&F for anodised aluminium sliding glazed window with three track / shutter, three shutter sliding with following specification complete all as specified and directed. (i) Window frame of cross section 101 mm x 44mm x 1.5mm thick (ii) Three way track for sliding shutter of cross section 91.8 mm x 31.75mm x 1.1mm thick (iii) Sliding shutter frame of cross section 40 x 18 x 1mm thick (iv) 4 mm thick tinded glass supeiror quality (v) IDPE rubber gasket for fixing of glass (vi) Locking cleats per shutter 1 Nos (vii) Sliding rollers per shutter - 02 Nos (viii) Aluminium wire cloth 0.30 mm nominal dia of wire and average width of aperture 1.56 for shutter 1 No (ix) Fixing of screw for frame with wall per window -08 Nos (x) Aluminium grill

Taking down chowkhat with shutters (without taking off shutters from the frame) exc 1.5sqm but n.exc 4 sqm each complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top and bottom rails. M.S frame shall be covered with heat channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as a gap insert for top rail and bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S frame welded / sealed to the stiles and nails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at side as per specification and drawings complete all as specified and directed.

S&F Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube, supplying and fixing in opening as per specification and drawing complete all as specified and directed..

S&F floor door stopper of aluminium alloy body and tongue anodised with hand brawn steel spring fixed in floor overall length of cover plate 1401mm complete all as specified and directed.

S&F 100mm size butt hinges medium weight cold rolled mild steel complete all as specified and directed.

S&F 250mm length of bolt aluminium alloy anodised sliding door bolt with hasp ,staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolt and sliding baths of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F aluminium anodised 100mm length of bolt borrel tower bolt of extruded section complete all as specified and directed.

S&F aluminium anodised 150mm length of bolt borrel tower bolt of extruded section complete all as specified and directed.

S&F 150mm size of aluminium handles cast type anodosed complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable to store and rubbish off the premises complete all as specified and directed.

M&L for glazed ceramic tiles 7 to 8 mm thick (square) polished , area of each tiles not exceeding 0.16 sqm in floors etc set and jointed in near cement slurry and pointed in white or coloured cement to match the colured tiles complete all as specified and directed

Ditto all as per item No 16.00 above but on vertical surface complete all as specified and directed

M&L for coloured glazed ceramic tiles in vertical surface 450X350X7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement complete all as specified and directed

M&L for non skid coloured ceramic tile 7 to 8 mm thick area of each tile exceeding .18 but n.exc .38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement complete all as specified and directed

M&L for screed bed or bedding layer of mortar 15 mm thick to receive the top layer of tiles in CM (1:6) complete all as specified and directed.

M&L for 10 mm thick backing coat in cement mortar 1:4 on vertical surfaces of wall complete all as specified and directed.

M&L granite(of any type) tiles 20mm thick machine cut bedded and jointed with grey cement slurry and pointed with white cement with ad mixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n.exc 15cm thickness (below or above grond level) complete all as specified and directed.

M&L for 75mm thick cement concrete type C-2 1:3:6(40mm graded aggregate) for plinth protection complete all as specified and directed.

Hacking out old broken glass (any thickness size quality or description) from aluminium/steel/wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with rubber bead, clips etc.complete all as specified and directed.

S&F 4.8mm thickness tinted glass ordinary quality exc 0.5 sqm in each pane and fixed with rubber gasket beading and aluminium channels in aluminium windows, bookcase/shelf with rollers, wheels, aluminum clips, screws etc and making good as per site requirement complete all as directed and specified.

Taking down of cement or cement lime plaster/skirting/ dado of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for applying 10 mm thick rendering on ceiling in cement mortar 1:3 finished even and smooth with out using extra cement complete all as specified and directed.

M&L for applying washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified including forming/rpovinding groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster in each Sqm area as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:4 using ready mix plaster bags on brick/concrete surfaces of external walls finished even and fair complete all as specified and directed. Make - Ultratech, rediplaster, Birla Aeccrocem complete all as specified and directed : Note:- Contrator is required to deposit ready mix bags for 100% CM quantity to Engr-in-charge with in 15 days of acceptance.

M&L for preparation of old/new plastered suface of wall and applying two coats of oil bound distemper using roller for painting over a coat of 2mm thick wall care putty complete all as directed and specified.

M&L for preparation of old surfaces and applying two coats of cement base paint to walls complete all as specified and directed.

M&L for preparation of old surfaces and applying one coat of white wash on walls complete all as specified and directed.

M&L for preparation of old/new plastered suface of ceiling and applying two coats of white wash on ceilling complete all as specified and directed.

M&L for preparation of old wooden surfaces and applying one coat of synthetic enamal paint 10CM width and girth complete all as specified and directed.

M&L for prepration of old steel surfaces and applying one coat of synthtic enamel paint over 10cm width and girth complete all as specified and directed.

S&F in repair 300 mm long ordinary mild steel rat tail rod pattern springs including roller roller plate complete fixed to wooden/ steel frame complete all as specified and directed.

S&F in repair mild steel wire cloth, 0.36 mm nominal dia. of wire and avg width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire stples complete all as specified and directed.

S&F in repair 19 mm thick prelaminated particle board interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screw to timber frame work as in cup board shelves kitchen cup board etc including piano type hinges complete all as specified and as directed.

S&F in repair fancy type brass CP hot and cold three way telephonic wall mixer swan neck, 15mm bore screwed down high pressure with long screwed shanks and fly nuts, screwed to iron pipe complete all as specified and directed

S&F in repair 15mm bore stop valves cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repairs 15mm Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified.

Ditto all as above item No 42 but 20mm bore complete all as specified.

S&F in repairs CP bib tap 15mm bore cast copper alloy with crutch butterfly handle, screwed down and screwed for iron pipe or for brass ferrule and fixed as specified and directed.

S&F in repair pair of brass adjustable legs for WALL MIXER incl washers and packing as per site requriment complete all a s spd and directed

S&F in repair of brass adjustable RODS for WASH HAND BASIN mixer inc washers and packing as per site requriment complete all as specified and directed

Cleaning of water tanks of capacity not exceeding 1000 ltr by removing all scale and dirt, etc from tanks and from mouth of circulating pipes etc complete all as specified and directed.

S&F in repair GI nipple of any length for bore 15mm sutible for HDPE water tanks complete all as specified and directed.

S&F in repair 10/12/14 inches long SS sliding channel for drawer complete all as spd and directed

S&F in repair GI nipple of any length for bore 20mm sutible for HDPE water tanks complete all as specified and directed.

S&F in repair CP bras toilet paper holder complete all as specified.

S&F in repair plain FRP sheeting 2mm at north light curves, roofs, windows, duct covering or at any other location by coach screw and washer, nut & bolt, staple pins or any other sutiable means all as specified and decided by engg-in-charge.Note: To be fixed in patches as specified and directed by engg-in-charge and ht of bldg can be more than 10 meters

S&F in repair EWC seat cover with fittings complete all as specified and directed.

M&L for 01 mm thick MS plain sheet for making modified lid of water tank as per sample kept in offcie of AGE B/R-II and fixed with 04 nuts and bolts for water tanks for water capacity n. exc 750 lt all as spd and directed

S&F in repair for plate rack of stainless steel 1 mm thick for kitchen or labotary over all size 720 x 600 x 230 mm fixed with plugs and washers on wall complete all as specified and directed.

M&L for welding in repair of loose joints of sliding doors, hinges, siliding door bolts, garrage doors, windows, doors, northlight framing, monekey prrofing framing etc inc at any height & inc necessary cutting and grinding all as specified and directed.

S&F in repair 20 mm bore valve of PTMT high pressure with epoxy coated Al rod and plastic ball screwed for iron pipe and fixed complete all as specified and directed..

S&F in repair mild steel chromium plated tubular curtain rod (suitable for MAP Qtrs) as per sample kept in AGE B/R-II office incl brackets and knobs for curtain rod (suitable for MAP Qtrs) as per sample kept in AGE B/R-II office complete all as specified and as directed.

S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including waste coupling and waste pipe complete all as specified and directed.

S&F in repair waste pipe of size 32 x 800 mm complete all as specified and directed.

S&F in repair for rubber gas kit 50 mm wide for fixing with door to protect entry of insects (wooden/aluminium) be means of screwes complete all as specified and directed.

M&L for cutting and removing of bushes, small trees, vegetation (Peepal, bad small plants etc) of any ida and girth from roof projection, chajjas, wall junction, parapet etc at any height by necessary demolition of brick work, cment plaster, digging out roots from concrete or brick wall filling holes on building wall/roof/chhajja/water tank staging area etc and making good with cement mortar 1:4 complete all as specified and directed.

S&F in repairs 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium red & high density plastic ball screwed for iron pipe(minimum wt 20mm-210grms) complete all as specified and directed.

S&F in repair S S grating doom 125mm dia with waste holes complete all as specified and directed

S&F in repairs CP towel rail 600mm fixed with and including C.P brass crewes and wooden /plastic cheat complete all as specified and directed.

S&F in repair PVC connection hot water fibre reinforced 600mm long with brass check nuts and PVC washers at both ends (suitable for MAP qtrs) as specified and directed.

S&F PVC(SRW)75mm floor trap,plain with grating including jointing with solvent cement complete all as specified and directed.

Taking up or down steel tubing 15mm and connection including cleaning for refixing or remoal to store complete all as specified and directed.

Ditto all as per item No 68.00 above but 20mm tube complete all as specified.

S&F in repair for cast copper alloy chromium plated shower rose 150mm complete all as specified and directed. Make Parko/GEM

S&F 15mm GI tube medium grade galvnised with all fittings laid on trenches and wall complete all as specified and directed.

Ditto all as above item No 69 but 20mm tube complete all as specified.

Supplied and fixed in repairs 10 mm thick glass corners as approved by GE complete all as specified and directed

S&F in repair 500 liters capacity rotational moulded polythyline water storage tanks (cylindrical vertical with closed tap) hoisted and fixed in position all as specified in SSR Part-I including dismantling of existing tank of any description complete all as specified and as directed.

S&F in repair to low level PVC valveless syphonic action type flushing cistern white with inlet ball valve float and handle including bracket complete all as specified and directed

S&F in repair viteress china wash basin white flat back size 630X450mm including CP 15mm pillar tap 32mm CP waste coupling waste pipe and brackets complete all as specified and directed.

S&F in repair for looing mirror SIZE 900 X 600 X 5-6MM (SUITABLE FOR MAP QTR - AS PER SAMPLE KEPT IN AGE B/R-II OFFICE) fixed with plastic/wooden plugs, chromium plated brass screws and cup washers complete all as specified and directed.

S&F 75mm PVC (SWR)pipe single socketed in any length with rubber ring joints fixed to wall or laid in trenches complete all as specified and directed.

Ditto all as above item No 78.00 but 110mm bore complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends any radius complete all as specified and directed.

Ditto all as above item No 80.00 but 110mm bore complete all as specified and directed.

Taking down eaves gutter and rain water pipe and size any pattern PVC /AC pipe including all fittings heads shoes bands etc including removal to store complete all as specified and directed.

Demolition of brick work or rubbled stone masonry including all quoins arches , pillars etc built in cement mortar and including removal from the site complete all as specified and as directed.

M&L brick work with fly ash old size bricks, straight or curved on plan exceeding 6 cm mean radius built in cement mortar 1:6 complete all as specified and as directed.

S&F in repair stainless steel peg set 6/8 nos in 45cm length stirrupe dia of hooks 6mm complete all as specified and directed.

S&F in repair viteress china wash down water closet pan (padestal pattern) white one piece wall mounted type (inc flushing cistern) including connection to drain or outgoing pipe and to flushing pipe antisyphonage pipe etc incl UF soft closed seat cover complete all as specified and directed

S&F in repair chrominum plated brass jet spray of 15mm bore sutible for fixing in EWC of MAP Qtrs complete all as spd and directed

S&F in repairs 8mm thick glass shelf ( size 300 mmx 120mm) fixed with SS bracket 100mm long with SS screws (as per Sample kept in AGE B/R-II office / MAP QTRS) or equivalent as approved by Engr-in-Charge complete all as specified and directed

S&F in repair S/S soap dish (as per Sample kept in AGE B/R-II office / MAP QTRS), fixed to plugs with chromium plated brass screws complete all as specified and directed

S K CONSTRUCTION CO

M/S ABHI ASSOCIATES

VIRAT CONSTRUCTIONS

M/S AMAR ELEKTRO CENTRE

High Tech Metal India

mohanlal gupta