REPAIR TO SEEPAGE / LEAKAGE TO MD ACCN, CHAJAA, REPARI TO SHAFT AND RAIN WATER PIPE AT BEG AND CENTRE AGE B/R-II OF GE (CENTRAL) KHADKI

Amount

Removing old tar felt, all loose dirt,old roof tiles,including taking down cement plaster cleaning the concrete roof surface including removal & cleaning of vegetation, fungus,moss small trees etc from the roof top wire brush, complete all as specified and directed by Engineer-in-Charge.

M&L for screed bed 15mm thick on existing concrete surfaces of roof in CM (1:4) mixed with water proofing compound @ 3% by weight of cement finishing even and smooth without using extra cement to receive water proofing treatment complete all as specified and directed by Engineer-in-Charge. Note : Rate for WPC shall be deemed to be included.

M&L cleaning of existing plastered surfaces and applying oil bound bitumen primer @ 0.3 kg/Sqm and providing and laying 3 mm thick APP modified water proofing memberane weighing not less than 3.00 kg/sqm, reinforced with non woven polyester reinforcement matt weighing not less than 160 gm/Sqm polyester core, having softening point not less than 150°C, longitudinal tensile strength not less than 650 N/ 5 cm, tearing streangth of 180 N / 5 cm, torch application method, with a overlap of 100mm at the sides and 150mm at the ends and sealing and applying a coat of solar reflective aluminium paint @ 0.2 Kg/Sqm on membrane surfaces complete including carrying out 24 hrs ponding test over the complete treatment all as specified and as directed by Engineer in charge.

Disconnecting existing tanks, setting aside (or lowering if required) for cleaning and removing of all scale dirt etc from tank and from mouth of circulating pipe etc (cleaning should be done with chemical) and hosting reconnecting and re fixing the same in position with including necessary fittings capacity of tank Exc 500 ltr & n.exc 1000 ltrs complete all s specified and directed by Engr-in-charge

Demolition of existing lime concrete of any description and in any position not otherwise specifically provided for, incl removing of debries all as specified and directed.

M&L for rendering 10mm thick on brick or concrete surfaces on walls in CM (1:3) mixed with and including WPC @3% by weight of cement in Sunken portion complete all as specified and as directed.Note :- Rate for WPC to be deemed to be included.

M&L PCC 1:5:10 type E-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete as sub base of floor complete all as specified and as directed.

Supply only UPVC pipe 40mm bore as in water spouts pipe complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M & L for non skid ceramic coloured tiles joint free, 7 to 8 mm thick (square or rectangular) area of each tile exe 0.18 Sqm but n.exe 0.38 Sqm, laid in floors set and jointed with neat cement slurry including pointing in white cement with pigment to match the shade of tiles laid over cement screed 15mm thick in CM 1:6 complete all as specified. , complete all as specified.

M&L for Non skid ceramic coloured tiles joint free 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in skirting, over 10mm thick screed bed in CM 1:4 on walls set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade as specified and as directed.

M&L Vitrified ceramic tiles Double charge 8-9 mm thick any shade (square/rectangular) area of each tiles exceedding 0.36 Sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over cement screed 15mm thick in CM 1:6 complete all as specified.

M&LVitrified ceramic tiles Double charge/s 8-9 mm thick any shade (square/rectangular) area of each tiles exceedding 0.36 Sqm but not exceeding 0.42 sqm in skirting, over 10mm thick rendering in CM 1:4 on walls set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade as specified and as directed.

S & F coloured non skid ceramic tiles 300 mm x 300 mm x 6 to 7mm thick,in floors set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in CM 1:6 all as specified.

M&L Glazed ceramic colour tiles in vertifical surface 350X250X7mm/450x350x7mm/300x450x7 mm thick with necessary border etc set and jointed in neat cement slurry and pointed in coloured cement to match over complete all as specified and directed

M&L taking up or down existing steel tubing and connections including cleaning for refixing or removal to stores complete all as specified and directed for 15mm bore

M&L taking up or down existing steel tubing and connections including cleaning for refixing or removal to stores complete all as specified and directed for 20mm bore

S & F for tubes medium grade 15 mm bore galvanised with all fitting fixed complete to wall and celiligs or laid in trenches complete all as specified and directed.

S & F for tubes medium grade 20 mm bore galvanised with all fitting fixed complete to wall and celiligs or laid in trenches complete all as specified and directed.

S&F rotational moulded polyethylene water storage tank cylindrical vertical with top closed hoisted and fixed in position all as specified and directed capacity 500 ltrs including dismantling existing tanks,and removing to store.

S&F rotational moulded polyethylene water storage tank cylindrical vertical with top closed hoisted and fixed in position all as specified and directed capacity 1000 ltrs including Dismantling existing tanks, and removing to store.

S&F in repair 20 mm dia gun metal ,globe or gate valves , with iron wheel head , screwed both ends for iron pipe

S&F in repair 20 mm dia Ball valves ,high pressure with polythene float and flynut with rod complete screwed for iron pipe or brass ferrule complete all as specified and as directed.

S & F in repair viterious china wash basin white flat back size 550 x 400 mm excluding taps waste chain and plug and porcelain stopper but incl necessary brackets CP wastes and other fittings all as specified and directed by EIC.

S&F in repair 32 mm bore of pipe low density polythene pipe (LDPE) of pressure rating 6Kgf/sqcm fixed to wall or laid in floor etc including fittings complete all as specified and as directed.

S&F in repair 600mmx450mm bevelled edges mirror consisting of 5-6 mm thick commercial plywood and fixed to plug with chromium plated brass screwed and cup washer

S & F in repairs wash down water closet (pedestal pattern) complete (excluding flushing cistern or flush pipe) pedestal pan and trap including seat cover connection to drain (or outgoing pipe ) and flushing pipe, antisyphonage pipe etc complete all as specified and directed.

S&F in repairs Seat Cover for pedestal pan

S&F in repair vitreous china squatting pan "Orissa" pattern size 580mmx440mm white with integral foot rests.

S & F in repairs PVC High/Low level flushing cistern 10 litrescapacity including all fittings I.e float valve, syphon, flushpipe,brackets all as specified and directed by EIC.

S&F in repair Bib tap fancy type short body cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe complete all as specified and as directed.

S&F in repair Bib tap short body standard of PTMT, any colour screwed for iron pipe suitable for 15mm dia all complete all as specified and as directed.

S&F in repair stop cock cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed both end for iron pipe or or brass ferrule for 15 mm bpre of pipe complete all as specified and as directed.

S & F in repair PVC connections 15mm dia with brass nut on both ends and washers 450mm long all as specified and directed.

S & F in repair Pillar taps fancy type chromium plated cast copper alloy with capstan heads screwed down high pressure with or without lettered Hot Or Cold With long screwed shanks and fly nutsscrewed for iron pipes 15mm bore dia all as specified and directed.

S&F Fancy type (in repairs) Stop cock (Concealed) cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed both end for iron pipe or or brass ferrule with long shank and cup for 15 mm bpre of pipe complete all as specified and as directed.

S & F in repairs brass CP shower rose with arm 125mm size with swivel joint incl fixing to steel pipe fixed in repairs as directed

S&F in repair two way angle cock with flange cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed both end for iron pipe or or brass ferrule for 15 mm bpre of pipe complete all as specified and as directed.

S&F in repair for CP Health Faucet ABS Body with 1 Meter Flexible tube & Hook complete all as specified and directed.

S&F in repair PVC floor trap square type with CP grating with or without hole including provision of jointing to waste pipes in run lead joint dia of outlet 75 mm, complete all as specified.

S & F of 110 mm dia PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches,floor and wall including taking down old unserviceable pipe any description and any type complete all as specified.

S & F PVC (SWR) Pipes single socketed in any length with rubberring joints laid in trenches or in floors and wall 75mm bore including taking down old unserviceable pipe any description and any type complete all as specified.

S & F in reapir PVC (SWR) bends 75mm dia bore any radius with access door all as specified and directed.

S&F in repair 110mm dia (bore of pipe) PVC bends (any radius), diminishing pieces or tapers (larger bore measured) with cement joints, complete all as specified.

S & F in reapir PVC (SWR) branch piece, single (single Y) 75mm dia equal or unequal

S & F in reapir PVC (SWR) branch piece, single (single Y) 110 mm dia equal or unequal

S&F in repairs 75mm bore PVC (SWR) junction single (Single T) equal or unequal.

S&F in reapir 110mm bore PVC (SWR) junction single (Single T) equal or unequal.

Taking down chowkats and frame exc 1.5 Sqm but n.exc 4.00 sqm each including shutter wiuthout taking off shutter from the frame and removing from site.

Taking down chowkats and frame n.exc 1.5 Sqm each including shutters without taking off shutters from the frame and removing from site.

Taking down shutters of any description exc 1.00 sqm but n.exc 2.00 sqm each and removing form site.

S & F Pressed steel frames made of 1.25 mm thick MS Sheet size 125x60mm for doors, ventilator with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, including providing PCC 1:2:4 type B1 (using 20mm graded stone agg) to fill the frame & making good complete all as specified & directed by Engr-in-Charge.

S & F Pressed steel frames made of 1.25 mm thick MS Sheet size 105x60mm for doors, ventilator with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, including providing PCC 1:2:4 type B1 (using 20mm graded stone agg) to fill the frame & making good complete all as specified & directed by Engr-in-Charge.

S&F 30 mm WPC door shutters decorative on both side , factory made 100% Solid WPC (Wood polymer Composite) of required size comprising of virgin PVC resin of K value 57-60 (suspension Grade), Calcium carbonate and natural Fibres and Non toxic additives made from Extrusion process WPC foam sheet Single Extruded (inner) with density not less than 650 Kg/Cbm manfctured by certified Company an ISO 9001-2015 , having good screw holding capacity (Screw withdrawal strength of 2000 N (Face) & 1100 N (Sdge), minimum Compressive Strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance of spread flame of Class A category with Property of being Termite/Bore Free,Water/Moisture Proof, Fire Retardant and fixing with stainless steel butt hinges of required size with necessary full body thtraded star headed star headed counter sunk SS Screws complete all as specified and as directed by Engr-in-Charge

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing shown on Page No. 160 of SSR 2010 part II. complete all as specified and as directed.

S & F 30mm thick FACTORY MADE MOULDED DOOR SHUTTER ‐ WOOD FREE consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 25mm x 25mm for stiles, top and bottom rails. M. S. frame shall have a coat of steel primers. The inner panel shall consist of 25mm thick EPS of Density 23 Kg /Cbm. bonded with 2mm thick termite proof, water proof and fire resistant moulded PVC Sheet Manufactured by an ISO‐9001‐2015 certified company, with 2, 4, 6 raised panel design in different plain and / or prelam colours after routing the Moulded design on one side & 2mm plain and /or prelam PVC sheet on other side of the EPS. The edge of panel to be sealed with lipping of 15mm wide PVC sheet baton ( made by sticking 2mm rigid foam PVC sheets of 5mm (±0.25) thickness using PVC solvent cement ) and stile sides 25mm (5mm x 5nos.) thick and 30mm width PVC Sheet fitted along M.S. tube for hardware provision & for lock 25mm thick ( 5mmx5nos. ) PVC sheet of size 150mm x 200mm fixed with inner side of EPS Panel etc. complete all as per specification & drawing and as directed by Engineer-in-charge.

S&F for 100mm long butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

S & F aluminium anodised barrel tower bolts of extruded section and fixed 200 mm long complete all as specified and directed.

S & F Aluminium handles 150 mm , fabricated type, anodised , fixed with screws , complete all as specified.

S&F in repairs 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed

S&F aluminium powder coated window sliding type (3 track) with frame size 100x35x1.2mm thick and shutter frame size 39.40x17.70x1.2mm thick with two glass shutter and one mesh shutter including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws with and including 4mm thick tinted float glass and 0.36mm dia apperture 1.4mm SS wire mesh and fittings etc and making good the jambs and painting with existing surface matching complete all as specified and directed by Engr-in-Charge

S&F aluminium louvered ventilators of section size 80mmx20mmx1.50mm including 5mm thick frosted glass fixed in full portion & adjustable type louvers and stainless steel wire mesh fixed type on outside frame etc. making good the jambs and complete all as specified and directed by Engr-in-Charge.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any cement mortar complete all as specified and as directed.

M&L for Black Marble Work 18 to 20 mm thick (table rubbed and polished ) as in steps , jambs, pillars, window- cills, , and like over 15mm thick cement screed base in CM (1:4) including pointing with white cement (1:2) using marble dust with admixture pigment to match with shade of slab rubbing , polishing and rounding to edges complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor or pavings n exc 15 cm thickness (below or above ground level)

M&L 75 mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate laid in panels surface finish even and smooth without using extra cement as in plinth protection /pathcomplete all as specified and as directed.

Demolition of brick /stone walls built in cement mortar incl all quoins, arches, pillars etc, but excluding ashler facings, dressed stonework and precast concrete articles

M & L for pre cast cement concrete solid block masonry with solid block of the grade C1 (1:3:6) set in CM (1:6) complete all as specified.

M & L for taking down cement of cement lime plaster of any description at any position on brick or stone or PCC block walls, chajja etc including ranking out joints hacking for key scrubbing down with water etc complete all as specified and as directed by the Engineer-in-Charge.

M & L for 15mm thick cement plalster in CM 1:4 over wall / concrete surfaces finished even and smooth without using extra cement including WPC complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 10 mm thick on fair faces of brick or concrete surfaces of wall in CM 1:6

M&L for preparation of new decorated plastered or unplastered surfaces of wall, and applying two coat of cement base paint (white or tinned) over a coat of alkali reistant primer complete all as specified and directed.

M & L preparation of New plastered wall surfaces and applying applying two costs of oil bound distemper complete all as specified and as directed by Engineer-in-charge.

S&F in repairs up to 10-15 Mtr height Solid poly carbonate sheet any colour of 3 to 5 mm thick cut and fix as per design and shape in dome shaped structure including fixing of aluminium frames at junctions of sheet with rubber packing as per site requirement with screws,nut bolts and washers also filing with silicon at the all junction of sheets in roof covering ,in dome shaped structure complete all as specified and as directed by Engr-in-charge. Note :- While quoting the rate fo this item the Rates will be deemed to be include the for follwing measures :- (i) Contractor should arrange all necessary scaffolding,Staging for while execution of above work . All safety measures of labours strictly ensured by contractor while execution of work . (ii) Rate for S & F of alluminium frames includig necessary fittings at junctionns of dome shaped design is also deemed to be included in the rate quoted.

S & F in repair of 18mm thick Marine Plywood laminated of any colour with High glossy acrylic sheet of 3mm thick , grade I as per IS 14587, for frame and shutter for kitchen cabinets complete all as specified and directed by Engr-in-charge.

S & F of medium weight, cold rolled mildsteel,SS finish, (Partial overlay/fully overlay of any type) diameter of cup 35mm, Hinge cup depth 11.5mm,self-closing complete all as specified and directed by Engg-in-charge.

S & F of stainless steel304 electro-polished for corrosion resistance modular thali holder / basket having size of 42 x 58.5 x 20 cm including telescopic drawer channel having weighing capacity of 6 kg complete all as specified and directed.

S & F of stainless steel304 electro-polished for corrosion resistancemodular cup & saucer holder / basket size of 52 x 53.5 x 10 cm with telescopic drawer channel having weighing capacity of 4kg complete all as specified and directed.

S & F of 200mm length stainless steel cabinet drawers handlers complete all as specified and directed.

S & F in repairs of stainless steel grain trolley SS 304 having size of 525x485x350mm, with heavy duty and grade steelwith finish of zinc, corrosion resistance with telescopic drawer channel having weighing capacity of 25 kg complete all as specified and directed.

S & F in repairs of stainless steel Plane wire Basket/ trolley SS 304 having size of 506x480x200mm, with heavy duty and grade steelwith finish of zinc, corrosion resistance with telescopic drawer channel having weighing capacity of 25 kg complete all as specified and directed.

S&F stainlesss steel modular perforated cutlery basket SS 3054 size size of 52x48.5x10 cm with telescopic drawer channel having weighing capacity of 6 kg complete all as specified and directed.

S&F of stainless steel hanging spice rack having three three shelf spaces length of 500 mm complete all as specified and directed.

SAMBHAJI D JARANDE

S P DEVELOPERS