Annual Maintenance Contract of Various Electrical / Mechanical Services at FSD Nagpur and FSD Gondia

Repairs & maintenance of the following Elect/Mech installation according to the terms & condition as per IE rule 1.Plug point/Power point 2. fans,E.I.,street light/compound lighting 3. water supply 4.water cooler 5. Air Coolers 6.LT panel maint, by deputing following technicians: Wireman Gr. 1 - 02 Nos Per Day on Normal Working Days Khallasi - 02 Nos Per Day on Normal Working Days Wireman Gr. 1 - 01 No on IInd Saturday, Sunday and Holidays Khallasi - 01 No on IInd Saturday, Sunday and Holidays. (at FSD Nagpur, Maharashtra)

Repairs & maintenance of the following Elect/Mech installation according to the terms & condition as per IE rule 1.Plug point/Power point 2. fans,E.I.,street light/compound lighting 3. water supply 4.water cooler 5. Air Coolers 6.LT panel maint, by deputing following technicians: Wireman Gr. 1 - 01 No Per Day on Normal Working Days Khallasi - 01 No Per Day on Normal Working Days. (at FSD Gondia, Maharashtra).

Complete job for rewinding of the existing open-well submersible pump motor of 5 HP capacity (any type and make), by dismantling and removing the failed pump set from the site, loading and transportation to workshop, rewinding with coated copper wire, overhauling with necessary minor repairs, testing for original RPM, H.P. output and no-load current consumption, and re-installation at site after completion of work. The job also includes making all electrical and mechanical connections complete in all respects, along with providing one-year guarantee for satisfactory performance of the rewound motor (FSD Nagpur).

Complete job for rewinding of the existing open-well submersible pump motor of 3 HP capacity (any type and make) by dismantling and removing the failed pump set from the site at FSD Gondia, loading and transportation to workshop, rewinding with coated copper wire, overhauling with necessary minor repairs, testing for original RPM, H.P. output and no-load current consumption, and re-installation at site after completion of work. The job also includes making all electrical and mechanical connections complete in all respects, along with providing one-year guarantee for satisfactory performance of the rewound motor. (FSD Gondia)

Replacement of the existing Impellar of approved make for an electric motor of 3HP/5 HP Capacity of all types with due alignment of the shaft and tested.

Replacement of the existing Bush and Bearing of approved make for electric motor 3HP/5 HP Capacity of all types with due alignment of the shaft and tested.

Rewinding the motor of the table / pedstal / ceiling / exhaust fan mm of all type and make and over hauling including minor repairs and testing of original speed and consumption with gaurantee for one year along with Replacing the existing Ball Bearing & Bushing with alignment of shaft and testing, including replacement of Capacitor .

Supplying 20 mm sizes of steel conduit along with accessories as required.

Providing following electrical components and accessories compliant with CPWD norms and ISI standards.

1/2 Module PVC Surface Box with Cover Plate.

3 Module PVC Surface Box with Cover Plate.

6 Module PVC Surface Box with Cover Plate.

8 Module PVC Surface Box with Cover Plate (Horizontal/square).

12 Module PVC Surface Box with Cover Plate.

5/6 A, one way Modular switch, ISI marked.

15/16 A, one way Modular switch, ISI marked

3 pin 5/6 A Modular socket outlet, ISI marked

6 pin 15/16 A Modular socket outlet, ISI market

Modular bell push, ISI marked

Stepped type Modular Fan regulator (2 module)

6 A to 32 A, ratings, SP MCB,"C" curve, 10 KA breaking capacity

6 A to 32 A, ratings, DP MCB,"C" curve, 10 KA breaking capacity

6 A to 32 A, ratings, TP MCB,"C" curve, 10 KA breaking capacity

6 A to 32 A, ratings, TPN MCB,"C" curve, 10 KA breaking capacity

40 A, double pole, 240 V Isolator

40 A, Four Pole, 415V, Isolator

63 A, Four Pole, 415V, Isolator

100 A, Four Pole, 415V, Isolator

6 way, SPN, double door, MCB DB

Sheet steel DP MCB enclosure

Straight through cable jointing kit with heat shrinkable kit with ferrules for 3 X 25 sq. mm 1.1 kV grade cable.

Supplying of 18-22 W LED surface mounted Batten light of Powder coated die cast /Extruded aluminium Body material (Thickness > 1.20 mm) and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%, Operating voltage AC 140 270 Volt, frequency 50/60 hz, Operating temp range -5 °C to 40 °C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10%, P.F.≥0.95, IP20, CRI >80, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard DeviationColour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).

Supplying of 45W Street light LED fixture powder coated pressure die cast aluminium body with driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI EMC As per CISPR -15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin),SDCM (Standard Deviation Colour Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output .LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).

Please Enable Macros to View BoQ information