Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
Closing Date
31 May 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Accessories Division, Lucknow
HINDUSTAN AERONAUTICS LIMITED Accessories Division, Lucknow Post Office, Lucknow - 226 016 Uttar Pradesh, India
Indigenization of One type of Moulding Part Coil Body for Aerospace Application
7293
PR23INDG/40
IMM
Lucknow, Uttar Pradesh
31 May 2024
30 Apr 2024
30 Apr 2024
24 May 2024
Project entails indigenous Indigenization of 01 Type of Molding Part as per the basic specification, drawings given at Annexure-A and other details given in this tender. Bidder has to accept all Terms conditions mentioned in Annexure-A & Annexure- B with full compliance.
Material Required for manufacturing should be as per Technical Specification attached at Annexure-A.
Timeline for development and certification of this part will be 06 months from the date of release of order to vendor.
This item must match with the original bought out item in form, fit and function.
All necessary documents required for airworthiness certification including COC, manufacturing process layouts; test results etc. shall be prepared by the Vendor and approved by airworthiness agency as applicable.
The vendor shall do necessary procurement along with COC (Certificate of Conformance) traceable to OEM as per approved document.
Vendor has to provide NABL Coordinated Material Test Report for the raw material used for manufacturing of part.
All development activities shall be done by vendor in co-ordination with RCMA, DGAQA, HAL Indigenization Dept., HAL QC & ASERDC as defined in the IMTAR-21 Version1.0 & AFQMS.
Vendor shall manufacture the part as per the approved technical specifications/drawings.
As per drawing all dimensions including all geometrical tolerances are to be Inspected, recorded & certified by Development Agency’s Quality Control Department piece-wise. Same will be subjected to verification by HAL’s Quality Control Department, DGAQA & RCMA at HAL / Vendor’s site.
The vendor shall also be audited as per AFQMS guidelines and first off article will be subjected to first article inspection as per AFQMS guidelines.
Vendor has to manufacture the part in Form, Fit and Functional Interface (FFFI) on turn-key basis, as per the drawing. However, any minor change in technical parameter of the item suggested by regulatory agencies during development stage shall also be considered by the developing agency without any cost implication.
Vendor has to develop the item exactly as per the drawing. The material used should be military-grade along with COC.
In case of order, HAL may depute it’s representative at worksite and/or organize review at HAL-Lucknow for the progress/results as per activities defined in work order in phase wise manner.
HAL may ask for further details on process variables, output or any other data that may be required for assessment of the work/ results at each stage of development.
Agency / Institution has to quote for complete set (i.e. manufacturing of prototype and amortized tooling cost). In case Agency / Institution has not quoted for complete set the quotation will be rejected.
Prices are to be submitted in Price Bid format only. Prices in any form should not be mentioned in Technical Bid (or any document part of Technical Bid) otherwise offer shall be summarily rejected.
Only Indian Original Equipment Manufacturers (OEMs), with proven expertise in design, development & manufacture of similar items of aircraft are requested to participate in the Tender.
The vendor should be with full knowledge in the field of design, development and supply of similar item / system and have developed/supplied in last 5 years same/similar/advanced specification type of item..
Details of similar projects (if any) completed by bidder including contact addresses of the existing customers should be provided (necessary documentary proof shall be provided).
If vendor has any dealing with Indian Air Force for similar items, the same shall be provided with contract / P.O. details
Bidders should provide details of manufacturing facilities, details of current capabilities (technical expertise) related to design, manufacture, certification and supply of the proposed items.
Bidders should have valid AS9100D accreditation (please attach supporting document). Vendor shall also ensure timely renewal of certification till completion of Project execution.
All applicable benefits to MSMEs as per Govt. guidelines will be applicable to MSME Vendors. Relevant Documentary evidence in this regard shall be uploaded along with the Bid.
Bidder, who wants to avail exemption given to MSME vendors, should have UAN. Copy of the Udyog Aadhar Certification shall be submitted to consider such exemption to MSMEs”
Vendor shall define quantitative amount of import (if to be used) in development / manufacture of the part. Indigenous content should be minimum 50 % by value (on Cost basis of the base contract price). Vendor has to provide a self-declaration in this regard in attached format Annexure-H. HAL team may verify the documentary evidence to confirm the given indigenous contents after scrutiny. Bidder has to confirm and submit the undertaking stating that the system will be indigenously designed, developed, manufactured, tested, certified and supplied by the firm. Bidder should indicate the indigenous content (IC) of the system / item for development as well as production phase. The indigenous content (IC) should be more than 50% by value in line with DAP 2020. The Bidder should provide a "Self-Certification" along with technical offer indicating that the item offered meets the minimum local content (MLC) (more than 50%) and provide the percentage of local content along with details of the location(s) at which the local value addition is made. It is mandatory to indicate compliance to MLC in technical bid zone. The signed certificate shall be provided on Bidder's letter head along with the offer. The offer received without indicating the percentage of local content & without Certification will not be considered & rejected.
Performance Bank Guarantee (PBG): Bidder shall furnish a Performance Bank Guarantee (PBG) as per HAL’s format for 3 % of the order value (to be calculated only on basic cost excluding taxes & duties, if such details are furnished separately in the bid submitted) valid up to end of the warranty period from a scheduled bank in India from the date of acceptance of item or otherwise equivalent amount shall be retained till completion of warranty period and other obligation of Purchase order/Contract. In case, quotes received without indicating the break-up of GST, ED, VAT, sales Tax etc. and order placed subsequently on composite value (without indicating break-up details of taxes & duties) then the PBG will be applicable on the composite value. In case bidder does not agree for Performance Bank Guarantee/retention of equivalent amount, the offer will be summarily rejected.
Evaluation will be based on full Compliance of Annexure-B and Annexure-C along with acceptance of scope of work and technical specification given at Annexure-A. For award of order Lowest price offer will be considered as mentioned in Price Bid (Annexure-D)
• Technical Compliance Matrix -Annexure-B • Technical Bid -Annexure-C • Price Bid - Annexure-D • Tender Terms & Conditions-Annexure-E & F • Self-Certification of Indigenous Content (IC)- Annexure-H • Declaration as per GFR 144 (xi), Annexure-I • Documentary proofs as required in Tender. • Prices for the Development Phase including prototype qty shall be at EC 2024 level with applicable GST and remain firm & fixed till completion of development phase. No escalation is applicable on Development Phase prices. • For Production units, unit price shall be quoted @ EC 2024 level (Calendar year) with applicable GST. • Bidders should indicate Price escalation formula with material & Labour content and Maximum Annual Escalation Cap (in percentage) for the production phase in Price Bid format only. • Quoted unit prices with Annual escalation as per Price escalation formula with the escalation cap indicated shall be valid for the entire quantity of production phase (Tentative Qty as mentioned in Price Bid) irrespective of time of placement of Purchase Order.
Successful bidder will have to get registered at HAL Lucknow (If not already registered) and provide all the necessary documents as required. If vendor is already registered in any other division of HAL for similar activity, Vendor registration letter issued by the Division may be submitted.
HAL may visit the vendor’s place for audit purpose during bid evaluation. In case any additional information or clarification is required, bidder shall have to provide it.
Response to bid through e-procurement should be uploaded on the e-portal along with documents stipulated in the Tender documents.
A company can submit only one response.
Bid shall be opened as per schedule indicated on e-portal. The date fixed for opening of bid, if subsequently declared as holiday, revised date of schedule will be notified. However in absence of such notification, the bid will be opening on next working day at same time.
The Competent Authority reserves the right to reject any or all the bids/responses without assigning any reason and the decision of the competent authority of the Accessories Division, Hindustan Aeronautics Limited, Lucknow shall be final and binding.
Bidder would be disqualified if they make false, incorrect, or misleading claims in their Bids.
TECHNICAL BID
Delivery Schedule
Prototype Qty for Design, Development, Qualification & Certification phase
PRICE BID
Delivery Schedule
Prototype Qty for Design, Development, Qualification & Certification phase
Bidder Confirmation
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
TenderNotification.pdf
TENDER_DOCUMENT • 0.11 MB
AnnexureATechnicalSpecification.pdf
TENDER_DOCUMENT • 0.45 MB
AnnexureBTechnicalCompliance Matrix.xlsx
TENDER_DOCUMENT • 0.01 MB
AnnexureCTechnicalBid.xlsm
TENDER_DOCUMENT • 0.02 MB
AnnexureDPriceBid.xlsm
TENDER_DOCUMENT • 0.02 MB
AnnexureETenderGuidelineandInstructions.xlsm
TENDER_DOCUMENT • 0.05 MB
AnnexureFTermsandConditions.xlsm
TENDER_DOCUMENT • 0.05 MB
AnnexureGPBG.pdf
TENDER_DOCUMENT • 0.61 MB
AnnexureHSelfCertification.pdf
TENDER_DOCUMENT • 0.22 MB
AnnexureIGFR144Declaration.pdf
TENDER_DOCUMENT • 3.67 MB
AnnexureJECSFORMAT.docx
TENDER_DOCUMENT • 0.01 MB
AttachmentofTender.pdf
TENDER_DOCUMENT • 0.11 MB
InvitationToTender.pdf
TENDER_DOCUMENT • 0.59 MB
Mandatory Document.docx
TENDER_DOCUMENT • 0.01 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .