CERTAIN MISC B/R REPAIRS TO BUILDINGS AND ITS SERVICES AT AFMSD, 2 VET LAB, MAP QTRS AND MES COMPLEX AND REPAIR TO PATH, HARDSTANDING AND OTHER MISC REPAIR WORKS UNDER GE GUWAHATI

Taking down cement plaster on brick wall/stone wall, ceilings, sunken floors etc, racking out joints, hacking for key & scrubbing with water completely complete as specified and directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in Cement plaster (1:6) and finishing the surface smooth and even without using extra cement complete as as specified and as directed.

M&L for rendering 15mm thick plaster in two layers (10mm +5mm) on other than fair surfaces of brick or concrete surfaces in CM 1:4 mixed with WPC as per manufacturer instructions on second layer finished the surface even and smooth without using extra cement complete all as specified and directed. (Note- supply only WPC shall be measured and paid seperately).

Supply only liquid WPC (best quality) of approved make

M&L for rendering 5 mm thick in cement mortar 1:3 on ceiling surface including finishing even and smooth without using extra cement complete all as specified and directed

M&L providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and Distempering two coats with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as permanufacturer's specification on new work complete all as specified and directed

M&L for preparation of new plastered surface of wall & applying two coats of cement base paint over a coat of cement primer all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparation of old plastered surface complete removal or unplastered surface on ceiling and applying three coats of white wash complete complete all as specified and directed

M&L for complete removal of existing treatement on plastered or unplastered surfaces of walls including brooming down or steel wire brushing, scrapping down smoke scoot, mould, moss and efflorescent salt, trading oil and greasy spots and applying two coat of cement base paint over a coat of cement primer complete all as specified and directed

M&L for complete removal of existing treatement on plastered or unplastered surfaces of walls including brooming down or steel wire brushing, scrapping down smoke scoot, mould, moss and efflorescent salt, trading oil and greasy spots and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm complete all as specified and directed

M&L for preparation of old plastered surface complete removal or unplastered surface of wall and applying distempering two coats with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as permanufacturer's specification complete all as specified and directed.

NOTES for BOQ serial item No.6.00, 11.00 & 12.00- (a) The work pertaining to periodical services & Water Proofing shall be executed by authorized applicator through manufacturer of which the materials i.e. Paint, Distemper, Putty etc. is proposed to be used by the contractor and approved by GE. (b) The cost of scaffolding upto 10m height of building shall be included in the quoted rate. (c) The contractor shall upload MOU letter with any one of manufacturer and also with their authorised applicator mentioned in the tender alongwith their bid in cover-I failing which his bid will be rejected. Authorised applicator shall have valid authorisation letter from the manufacturer (Minimum regional HQs) and shall have been issued not less than 30 days from the date of commencement of the work. The authorisation letter needs to be valid for the complete period of execution of the painting work. (d) After preparation of the surface, Engr-in-Charge shall approve the same before applying primer and finishing coats. (e) Building wise stage passing register shall be maintained and shall be signed by Engr-in-Charge and contractor. (f) The equipments to be used in the work shall be certified by the manufacturer with whom the MOU been entered into. (g) Contractor shall submit approved company generated 05 years warranty card at the time of submission of RAR & Final Bill. 15% amount of this item will be retained in FB for a period of 05 years from the certified date of completion. (h) Masking of windows / doors during spray painting using polythene film is inluded in the quoted rates. (j) Cleaning and clearing of site of painting, mats etc after completion of work is included in the quoted rate.

M&L for preparation of old decorated plastered or unplastered surfaces of walls including brooming down or steel wire brushing, scrapping down smoke scoot, mould, moss and efflorescent salt, trading oil and greasy spots and applying two coat of white wash complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the permises complete all as specified and directed

M&L for screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6 complete all as specified and directed

M&L for non skid ceramic tiles (coloured) 7 to 8mm thick, area of each tile exc. 0.11 but not exc. 0.18 Sqm as in floor set and joint in cement slurry, jointed & pointed in white or coloured cement to match the surface of the tile complete all as specified and directed

M&L for virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and cement to match complete all as specified and directed

M&L for granite 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in mortar (1:4) including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed

M&L for machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed

M&L for chequered cement concrete tiles 20cmx20cm x25mm thick, set, jointed and pointed in neat cement slurry in floors with gery cement and no pigment pointed in white or coloured complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick or concrete surface in cement mortar 1:3 complete all as specified and directed.

M&L for providing glazed ceramic coloured tiles of size 300x200 mm (5 to 7 mm thick) as in vetical surface set in cement slurry jointed & pointed in white or coloured cement to match the surface of tile complete all as specified and directed.

M&L for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

S&F machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 Grade, laid over 50mm thick sand bed layer complete all as specified and as directed. (Note:-Bedding layer of sand will be measured and paid separately)

Demolition of brick work/ block masonry or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles and removal all rubbish material complete all as specified directed.

Materials and labour for Brick work with sub class 'B' bricks straight or curved on plan exc 6.00 m mean radius built in CM 1:6 complete as specified and directed.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as directed.

S&F Pre-painted galvalume aluminium zink coating GI based corrugated/semi corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Dismantling of ceiling boards (fiber, pulp, insulation etc) or insulation boards /slabs/blankets any thickness including cover fillets as specified.

S&F anodised aluminium snap grid of size 605x605mm frame work for false ceiling complete all as specified and directed.

M&L for 4 mm thick non-AC-E Board of size (595x595mm) fixed in ceilings and applying one coat of distemper oil emulsion including prerparation complete all as specified and as directed

S&F in repair wash basin vitreous china flat back size 550x400mm excluding taps, waste pipe, chain and plug and porcelain stopper but including brackets and any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and as directed.

S&F waste fittings 32mm dia brass chromium plated for glazed ware basins etc with long screwed shanks and fly nuts flange and bedded in red lead cement and other end complete all as specified and as directed

S&F in repair PVC connection 15mm dia size with PTMT nuts of length 450 mm complete all as specified and as directed

S&F in repair stop valves 15mm dia cast copper alloy screwed down high pressure with crutch of butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed

S&F in repair 15mm bib tap cast copper alloy chromium plated with crutch or butterfly handle screwed down for iron pipe or for bass ferrule complete all as specified and as directed

S&F in repairs 100mm CI floor trap,plain with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed

S&F in repairs pillar taps, 15mm dia cast copper Alloy with capstan heads, chromium plated ,screwed down, high pressure, with or with out lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed

S&F in repairs Vitreous china squatting pan, "Orrisa Pattern" size 580x 440 mm white with integral foot rests (excl flushing cistern and flush pipe) complete all as specified and as directed

S&F in repair vitreous China wash down water closet pane (Pedestal Pattern) white excluding flushing cistern and flush pipe complete all as specified and as directed.

S&F repair plastic water closet seat cover (any colour to match the EWC) closed pattern with flat bottom and cover complete all as specified and as directed

S&F in repair 10 ltr capacity PVC valveless syphonic action type flushing cistern low level colour with inlet ball, float and handle including brackets complete all as specified and as directed

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect complete all as specified and as directed.

S&F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and as directed.

Taking up or down steel tubing and connections of 15mm bore, fixed in walls, ceiling, floors, trenches etc complete all as specified and as directed.

Taking up or down steel tubing and connections of 20mm bore, fixed in walls, ceiling, floors, trenches etc complete all as specified and as directed.

S&F for 15 mm bore “medium grade” mild steel galvanised iron (GI) tubing with all fittings fixed to wall, ceiling or floors, complete all as specified and as directed.

S&F for 20 mm bore “medium grade” mild steel galvanised iron (GI) tubing with all fittings fixed to wall, ceiling or floors, complete all as specified and as directed.

S&F towel rail 45mm long of PTMT fixed with and including chromium plated brash screws and wooden/plastic cleats etc complete all as specified and as directed.

Dismantling 500 ltr water tank and removing to store complete all as specified and as directed.

Supply and fixing 500 liters rotational moulded polyethylene water storage tank, multi layered (cylindrical vertical with closed top cover) as per IS-12701-1996, hoisted and fixed in position including necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I complete all as specified and as directed.

Dismantling 1000 ltr water tank and removing to store complete all as specified and as directed.

Supply and fixing 1000 liters rotational moulded polyethylene water storage tank, triple layered (cylindrical vertical with closed top cover) as per IS-12701-1996, hoisted and fixed in position including necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I complete all as specified and as directed.

S&F 25mm Gun-metal. globe or gate valves, with iron wheel headt screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F 25mm Ball brass valves. high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

Cleaning & removing all scale & dirt etc from tanks & from mouths of circulating pipes etc of capacity exc 250 litres & not exc 500 litres with gunny bags, cleaning with fresh water and bleaching powder all as specified and directed.

Cleaning & removing all scale & dirt etc from tanks & from mouths of circulating pipes etc of capacity exc 500 litres & not exc 1000 litres with gunny bags, cleaning with fresh water and bleaching powder all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified and as directed.

M&L for providing 75mm thick PCC 1:3:6 type C2 (40mm graded aggregate) as in plinth protection and paving finishing the surface even and smooth without using extra cement complete all as specified and as directed.

M&L PCC (1:3:6) type C2 (40 mm graded aggregate ) in surface chanel and drain complete all as specified and as directed.

M&L extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds , mitred / stopped ends complete all as specified and as directed.

Add to (or deduct from) serial item No. here-in-above for each 25mm girth or part thereof over or under 30cm inner girth.

Taking down chowkats or frame not exc 1.5 sqm with shutter (with out taking off shutter from frame) all as specified and remooving from site complete all as specified and as directed.

Taking down chowkats or frame exe 1.5sqm and n.exe 4 sqm with shutter (with out taking off shutter from frame) all as specified and remooving from site complete all as specified and as directed.

Taking down shutter n exc 1 sqm all as specified and remooving from site complete all as specified and as directed.

Taking down shutter exc 1 sqm but n exc.2 sqm all as specified and remooving from site complete all as specified and as directed.

M&L 2nd class hardwood, Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, devotailed or welded complete all as specified and directed.

S&F steel ventilator with top hung shutter including hinges, steel peg stay, handle including one shop coat of zinc chromate primer complete all as specified and directed.

S&F in repairs 18/19 mm thick block board grade 2nd quality interior grade decorative veneer on one face fixed with screw to timber frame complete all as specified and directed

M&L for 30mm thick 2nd class hardwood glazed and skeleton door shutter open rebated and prepared to receive glass edges of frames plain chamfered or rounded fitted with cut and mitred beads for securing glass etc complete all as specified and directed

M&L for 30mm thick, 2nd class hardwood plain framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or veneered particle board medium density, wood particle board with commercial face veneers : supplied and fitted to chowkhats complete all as specified and directed

M&L for 30mm thick 2nd class hardwood glazed and skeleton window shutter open rebated and prepared to received glass gauge with sash bars edge of framing plain chamfered or round , fitted with cut and mitred bends for securing glass gauge etc provided with styles and rails etc size of member of shutters as specified in SSR part-I sec-VIII clause 8.24 ( b) fitted to chowkats complete all as specified and directed.

S&F stainless steel wire cloth, 0.56 mm nominal dia of wire and average width of apreture 1.18 mm & fixed with tinned tacks on galavanized wire staples fixed complete all as specified and directed.

S&F mild steel hold fasts of size flat iron 25x3mm; for securing chowkhats and similar small articles conforming to Fe-290 Gde-E-165 incuding treating hold fast with tar or coal tar black paint, sanding complete all as specified and as directed.

M&L for cement concrete (1:3:6) type C1 using 20mm graded stone aggregate in bed block for hold fasts and coping incl necessary form work weathering slighly rounded or chamfered angles and treating and making good the disturbed portion without using extra cement complete all as specified and directed.

S&F 2nd class hardwood small fittings such as brackets of any type of door and window stopper including all necessary articles n.exc 2.00 cucm each complete all as specified and directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suplying and fixing in opening as per specification & drawing complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supplying & fixing in the frame at site as per specification & Drg complete all as specified and directed.

S&F 100mm size butt hinges medium weight cold rolled mild steel complete all as specified and directed.

S&F 75mm size butt hinges medium weight cold rolled mild steel complete all as specified and directed.

S&F 125mm size aluminium handle cast type anodised complete complete all as specified and directed.

S&F 100mm size aluminium handle cast type anodised complete complete all as specified and directed.

S&F 200mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 125 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple(bolt type and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium complete all as specified and directed.

Hacking out old broken glass any thickness size quality or description from wooden frame concrete or brick surroundings glazed with putty with beads complete all as specified and directed.

M&L for 3 mm thick sheet glass ordinary quality and glazing with oil putty/wooden beads in squares not exc. 0.5 Sqm in each pane complete all specified and as directed.

M&L for 3 mm thick frosted sheet glass ordinary quality and glazing with oil putty/wooden beads in squares not exc. 0.5 Sqm in each pane complete all specified and as directed.

M&L for preparation of new wooden surface any description not otherwise described and exc 10cm width or girth applying two coats of synthetic enamel paint over a coat of pink primer complete all specified and as directed.

M&L for preparation of new steel surface any description not otherwise described and exc 10cm width or girth applying two coats of synthetic enamel paint over a coat of zinc chrome primer complete all specified and as directed.

M&L for preparation of old painted surface applying a coat of synthetic enamel paint on steel surface over 10cm grith complete all specified and as directed.

M&L for preparation of old painted surface applying a coat of synthetic enamel paint on wooden surface over 10cm grith complete all specified and as directed.

S&F in repair toilet paper holder with flat recessed type stainless steel complete all as specified and directed."

S&F powder coated anodised aluminium (minimum thickness of powder coating 50 micron) frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed Note:- Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed

Supply and fixing powder coated Anodised aluminium (minimum thickness of powder coating 50 micron) window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified. Note:- (i) Labour charges for fixing of glass/wire guage/aluminum grills is inclusive in the unit rate quoted. Glass/Wire Guage/aluminum grills shall be measured and paid seperately aa supply only rates. (ii) Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed.

Supply and fixing powder coated Anodised aluminium (minimum thickness of powder coating 50 micron) door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified. Note:- (i) Labour charges for fixing of glass/wire guage/aluminum grills is inclusive in the unit rate quoted. Glass/Wire Guage/aluminum grills shall be measured and paid seperately aa supply only rates. (ii) Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed

Supply only 4 mm thick sheet glass , ordinary quality fixed with aluminium frame work square n exc 0.5 sqm in each pane complete all as specified and directed.

Supply only 4 mm thick sheet glass , ordinary quality fixed with aluminium frame work square exc 0.5 sqm in each pane complete all as specified and directed.

S&F prelaminated particl board 12 mm interior grade prelaminated both side with decorative choice lamination fixed to aluminium frame work all complete all as specified and directed.

S&F in repairs curtain rails anodised aluminium alloy chromium plated with fixing brackets, stoppers, rollers complete all as specified and as directed

Dismantling boarding, any description, fixed in any position with nails complete all specified and as directed.

S&F 20mm thick 2nd class hardwood planed one side with butt joints as in shelves of cupboards,racks and pelmets, eaves board fixed with nails complete all as specified and as directed.

S&F in repair rain water drainage pipes PVC(SWR) pipes single socketed 110mm bore in any length with rubber rings joints fixed to walls complete all as specified and as directed.

S&F in repair PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or fixed to floor for 110 mm bore of pipe complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 110mm bore PVC ( SWR) vent cowl complete all as specified and directed.

Supply and fixing aluminium door closer hydraulically regulated, designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.

S&F in repair sinks with drainage board made of stainless steel l mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed .

M&L for TMT bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

M&L for precast RCC (1:2:4) type B1 using 20mm graded crushed stone aggregate as in cover slabs including necessary form work and set in CM (1:4) complete all as specified and as directed. Note :- Reinforcement shall be measured and paid for separately.

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, n exc 10 sq m on plan and getting out in soft/ loose soil complete all as specified & directed.

Removing excavated materials to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point, complete all as specified.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

M&L for 75 mm thick providing cement concret type D-2 (1:4:8) using 40 mm graded stone aggregated for sub-base complete all as specified and as directed.

M&L for hardcore broken stone of gauge n. exc 63 mm deposited, spread and levelled in layers n. exc. 150mm thick, watered and rammed to a true surface complete all as specified and as directed.

Supply and fixing in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and directed.

Supply and fixing in repair solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed .

Supply and fixing in repair metal tubular delineators made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed