REPAIR/REPLACEMENT OF INTERNAL ELECTRIFICATION WITH THEIR FITTINGS/FIXTURES TO MARRIED ACCN AT BASISTHA AREA UNDER GE GUWAHATI

Amount

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. and making good disturbed surfaces of walls, floors, etc as per existing specification after providing point wiring under respective items here-in-after complete all as specified and directed.

Taking down unserviceable main switches and DB's including MCCB/MCB;s of any size and capacity complete all as specified and directed.

M&L surface point wiring for light/fan points controlled by one, one way switch switch complete with 1.5 Sqmm single core PVC insulated unsheathed FR-LSH cable 1100 volts grade (ISI marked) with multistranded copper conductor with proper colour coding drawn through and including non-metallic rigid PVC casing capping medium grade with accessories (ISI marked) fixed in wall/fixed to roof, ceiling etc including provision of 1.5 Sqmm PVC insulated multistranded unsheated copper conductor cable FR-LSH (ISI markd) with proper colour coding as earth continuity conductor connected to common earth dolly , modular sheet steel sunken terminal box of appropriate size suitable for modular switch/ fittings concealed in walls, with modular back plate, top cover fixed flush to wall for housing switches, socket outlets, fan regulators etc duly earthed including cutting chases and sinking for boxes and making good to the disturbed surface of wall/floor and matching with existing specifications, complete all as specified and directed. Note:- Connections of cable with MCB's or bus bar shall be done through proper size copper/brass thimbles.

All as per item No 3 here-in-above but for one 6 amps socket out let point on the same board with other switches

All as per item No 3 here-in-above but for one 6 amps socket out let point on independent board.

All as per item No 3 here-in-above but for one bell/buzzer controlled by one push buttton on the same board with other switches or independent board

All as per item No 3 here-in-above but for One Light point controlled by two numbers two way switches 5/6 Amps.

M&L surface point wiring complete for one socket outlet 15/16 Amps point on independent board with 4.00 Sqmm single core PVC insulated unsheathed FR-LSH cable 1100 volts grade (ISI marked) multistranded PVC insulated multistranded unsheated copper conductor cable FR-LS (ISI markd) with proper colour coding drawn through and including non-metallic rigid PVC casing capping medium grade with accessories (ISI marked) fixed in wall/fixed to roof, ceiling etc including provision of 4.00 Sqmm PVC insulated multistranded unsheated copper conductor cable FR-LSH (ISI markd) with proper colour coding as earth continuity conductor connected to common earth dolly , modular sheet steel sunken terminal box of appropriate size suitable for modular switch/ fittings fixed in walls, with modular back plate, top cover fixed flush to wall for housing switches, socket outlets, fan regulators etc duly earthed including sinking for boxes and making good to the disturbed surface of wall/floor and matching with existing specifications complete all as specified and directed. Note- Connections of cable with MCB's or bus bar shall be done through proper size copper/brass thimbles.

M&L for concealed point wiring for light/fan points controlled by one, one way switch with two single core 1.5 Sq.mm size FRLSH multistranded copper conductor PVC insulated cables and one single core 1.5 Sq.mm size green FRLSH colour PVC insulated,multistranded copper conductor PVC cable as earth continuity conductor,1100 volts grade, complete drawn in and including 20mm(minimim) medium grade rigid PVC CONDUIT and conduit accessories i.e. joint boxes, terminal boxes for mounting or housing switches, socket outlets, fan regulators, etc. confirming to IS specifications, including provision of flush modular mounting boxes, with back plate and cover plate of appropriate size & thickness for mounting switch, sockets etc. with including cutting chases for conduits & sinkings for Modular boxes & making good to walls, floors etc. complete all as specified & as directed Note:- (i) Connections of cable with MCB's or bus bar shall be done through proper size copper/brass thimbles. (ii) Where concealing of conduit is not feasible ie on surface of roof/ceiling etc, conduit shall be fixed on surface with necessary saddles at no extra cost.

All as per item No 9 here-in-above but for one 6 amps socket out let point on the same board with other switches

All as per item No 9 here-in-above but for one 6 amps socket out let point on independent board.

All as per item No 9 here-in-above but for one bell/buzzer controlled by one push buttton on the same board with other switches or independent board

M&L for concealed point wiring for one socket out let 15/16 amps point on the independent board with two single core 4 Sq.mm size FRLSH multistranded copper conductor PVC insulated cables and one single core 4 Sq.mm size green FRLSH colour PVC insulated,multistranded copper conductor PVC cable as earth continuity conductor,1100 volts grade, complete drawn in and including 20mm(minimim) medium grade rigid PVC CONDUIT and conduit accessories i.e. joint boxes, terminal boxes for mounting or housing switches, socket outlets, etc. confirming to IS specifications, including provision of flush modular mounting boxes, with back plate and cover plate of appropriate size & thickness for mounting switch, sockets etc. with including cutting chases for conduits & sinkings for Modular Sunken boxes & making good to walls, floors etc.complete all as specified & as directed Note- (i) Connections of cable with MCB's or bus bar shall be done through proper size copper/brass thimbles. (ii) Where concealing of conduit is not feasible ie on surface of roof/ceiling etc, conduit shall be fixed on surface with necessary saddles at no extra cost.

M&L sub-main wiring alongwith earth wire of size of 4 x 10.0 sq. mm + 2 x 6.0 sq. mm earth wire, ISI marked, FRLSH, PVC insulated, multi stranded, copper conductor, single core cable drawn through and PVC casing capping medium grade with accessories (ISI marked) of suitable size with all fittings and accessories ISI marked including taking out old unserviceable submain wiring and making good to walls, floors etc as per existing specifications complete all as specified and directed. NOTE : (i) Four runs of PVC wire, Two run of earth wire & one run of PVC Conduit will be measured as one length (ii) Loop length as required and as directed deemed to be included in the UNIT RATE QUOTED.

M&L sub-main wiring alongwith earth wire of size of 2 x 6.0 sq. mm + 1 x 40 sq. mm earth wire, ISI marked, FRLSH, PVC insulated, multi stranded, copper conductor, single core cable drawn through and PVC casing capping medium grade with accessories (ISI marked) of suitable size with all fittings and accessories ISI marked including taking out old unserviceable submain wiring and making good to walls, floors etc as per existing specifications complete all as specified and directed. NOTE : (i) Two runs of PVC wire, one run of earth wire & one run of PVC Conduit will be measured as one length. (ii) Loop length as required and as directed deemed to be included in the UNIT RATE QUOTED.

M&L sub-main wiring alongwith earth wire of size of 2 x 4.0 sq. mm + 1 x 2.5 sq. mm earth wire, ISI marked, FRLSH, PVC insulated, multi stranded, copper conductor, single core cable drawn through and PVC casing capping medium grade with accessories (ISI marked) of suitable size with all fittings and accessories ISI marked including taking out old unserviceable submain wiring and making good to walls, floors etc as per existing specifications complete all as specified and directed. NOTE : (i) Two runs of PVC wire, one run of earth wire & one run of PVC Conduit will be measured as one length. (ii) Loop length as required and as directed deemed to be included in the UNIT RATE QUOTED.

S&F LED lights fitting 1x 22 Watt, 220Volts, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 Volts, AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F LED light fitting 1x9Watt/1X10Watt bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F round shape 15 Watt, 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F LED flood light 70 watt 230 Volts AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.

S&F in repair, Post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.

S&F in repair, LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.all as specified and directed.

S&F bracket suitable for fixing of security light fitting made out from 32mm bore GI pipe, medium grade 1.5 metre in length, made to shape as required, fixed to pole with MS flat iron clamp of size 25x4mm duly welded, bent to shape and making holes etc including preperation of surfaces and applying a coat of zinc chrome red oxide primer over MS flat iron surfaces complete including necessary nuts, bolts & washer etc as required and as specified and directed.

S&F call bell ding dong type AC Single pole 220/240 Volts, surface type complete all as specified and directed.

S&F Modular switch, single pole, one way, 6 Amp, 1 Module, 230 volt, ISI marked complete all as specified and directed.

S&F Modular type switch piano white 6 Amps single pole 02 way 01 module complete all as specified and directed.

S&F Modular bell push with indicator, one way, 6 Amp, 1 Module, 230 volt, ISI marked complete all as specified and directed.

S&F Modular shuttered Socket outlet 3/5 Pin, 6 Amp, 2 Module, 230 volts, ISI marked complete all as specified and directed.

S&F stepped type modular electronic fan regulator 120 watt 2 module suitable for 1200/1400 mm sweep energy saving fans,ISI marked complete all as specified and directed.

S&F ceiling rose, PVC/ polycarbonate, isolated body, three terminals, complete all as specified and directed.

S&F Modular shuttered Socket outlet 6 Pin, 6/16 Amp, 2 Module, 230 volts, (ISI marked) complete all as specified and directed.

S&F Modular switch, single pole, one way, 16 Amp, 1 Module, 230 volt, ISI marked complete all as specified and directed.

S&F Sheet metal enclosure for 4 way VPTN Distribution Boards (DB’s), IP-43 double door, with 200 amps rated bus bar, suitable for hosing MCCB as incommer and MCB's as outgoing including blanking plates as required and flush to wall surface complete all as specified and directed. Note : Incomming MCCB and Outgoing MCBs measured and paid seperately under relevant item

S&F Sheet metal enclosure for 8 way Distribution Boards (DB’s), IP-43 protection, double door, Single pole & neutral, complete including blanking plates as required & flush to wall/other surface complete all as specified and directed.

S&F Sheet metal enclosure for 4 way Distribution Boards (DB’s), IP-43 protection,double door, Triple pole & neutral complete including blanking plates as required & flush to wall/other surface complete all as specified and directed.

S&F MCB, SP, C Series 240 Volts, 6-32 Amps 50 HZ, 10KA complete all as specified and directed.

S&F MCB, SPN, C Series 240 Volts, 63 Amps 50 HZ, 10KA complete all as specified and directed.

S&F MCB, SPN, C Series 240 Volts, 32 Amps 50 HZ, 10KA complete all as specified and directed.

S&F MCB, TPN, C Series 415 Volts, 100 Amps 50 HZ, 10KA complete all as specified and directed.

S&F MCB, TPN, C Series 415 Volts, 63 Amps 50 HZ, 10KA complete all as specified and directed.

S&F MCCB, 125 Amps four pole 415 volts breaking capacity 16 KA fixed thermal and fixed magnetic setting .complete all as specified and directed.

S&F in repair, 25 Amps Single Phase motor starter, 240 Volts complete all as specified and directed.

S&F in repair, sheet metal encloser Plug and socket for suitable for 20 Amps SPN with and including 20 Amps MCB and flush to wall surface complete all as specified and directed. .

Earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level, connected to galvanized iron earth lead wire of 4 sqmm by means of bolts, nuts, check nuts and washers of galvanized iron or steel, all as shown in Electrical Plate No 3 of SSR Part - I, including necessary excavation and earth work, P.C.C (1:3:6) type C-I with 50 mm thick Pre-cast R.C.C. (1:2:4) type B-I cover slab (reinforced with 8 mm dia TMT bar @ 15 cm C/C both ways and suitable handle of 10 mm dia round bar), including providing charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode, with funnel and 20 mm bore galvanized iron watering pipe (light grade), wire mesh, aluminium lugs, complete in all respect, GI earth wire protected by 15 mm bore (medium grade) galvanized iron pipe and other end connected with main switch board or Earthing test point as directed, including necessary earth work and disposal of spoil to a distance not exceeding 50 metre and necessary testing on completion including dismentaling old unserviceable ones complete all as specified and directed.

M/s Torrent Inc

D.B ENTERPRISE

SWASTIKA ENGINEERS AND AGENCIES

M/S SEWAK SINGH