SPECIAL REPAIR TO INTERNAL ELECTRIC WIRING WITH LED FITTINGS AT BLDG NO P-35 (SNCOs MESS) AT 24 ED UNDER AGE (I) MANAURI

Amount

Taking down carefully (aluminium) point wiring complete of any type (batten/surface conduit or concealed) for light point, fan point, bell point socket point or power point complete with all fitting such as switches, sockets pendants, ceiling rose, round block etc complete and making good disturbed surfaces of wall, floor or ceiling with plastering tiles or roof treatment etc and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as specified and directed.

Material and labour point wiring for one light point controlled by one way indepdent switch.including concealed in surface of structure/ truss etc rigid non-metallic PVC conduit pipe medium grade, ISI marked heavy duty in size 20 MM dia with 1.5 Sqmm FRLS insulated unsheathed, multi stranded copper conductor cable, single core 1100 volt grade with flush cast iron/ pressed steel terminal boxes of suitable size for fixing modular accessories such as switches, sockets and fan regulators etc with modular cover plate and fixing with brass screws/cup washer and including FRLS insulated & unsheathed 1100 volts grade cable with multi stranded copper conductor of size 1.5 Sqmm as continous earth wire complete including making good the disturbed surfaces for the following:- (Note;- Quoted rate shall be included cost of cheasesing ,cutting, plastering and colouring etc to surface of wall / beam/ roof etc as site required matching with existed surface and blank plate to be cover up to extra gap in mounting board in given module /make / model etc) (a) One light point controlled by one oneway independent switch.

All as per item No -02 above but for one fan/ Bell point controlled by one way indepdent switch.

All as per item No -02 above but for one 3 pin 5 Amps socket out let point on same board controlled by one switch.

All as per item No -02 above but for one 3 pin 5 Amps socket out let point on independent board controlled by one switch.

All as per item No -02 above but point wiring for 15 Amps socket using 2.5 Sqmm copper cable for phase and neutrl and 2.5 Sqmm as earth wire complete.

All as per item No -02 above but power point wiring using 4 Sqmm copper conductor cable FRLS insulated unsheathed and unsheathed copper conductor of 4 Sqmm as earth wire complete. (Note : All cercuit shall be taken from seprate control DBs (connected with energy meter) to be connecting indivisual ACs/ power load).

Supply and fixing modular switch, one way 6 Amps 1 module complete all as specified and directed.

Supply and fixing modular switch, one way 16 Amps 1 module complete all as specified and directed.

Supply and fixing modular bell push 6 Amps 1 module complete all as specified and directed.

Supply and fixing modular socket 6 A, 2/3 pin combined 2 module complete all as specified and directed.

Supply and fixing modular socket 16 A, 3/5 pin combined 2 module complete all as specified and directed.

Supply and fixing modular type power unit single phase 220 volts 32 Amps socket and control switch ISI marked 3 module complete all as specified and directed.

Supply and fixing bell ding dong type AC 230 volts single pole complete all as specified and directed.

Supply and fixing ceiling rose surface type 65 MM x 50 MM, 2 to 3 terminal complete all as specified and directed.

Supply and fixing modular fan regulator step type 120W 2 module complete all as specified and directed.

Supply and fixing Telephone sockets 2 Pin modular type complete all as specified and directed.

Supply and fixing TV plug sockets 2 Pin modular type complete all as specified and directed.

Supply and fixing white cover plate with frame 2 module complete all as specified and directed.

Supply and fixing white cover plate with frame 3 module complete all as specified and directed.

Supply and fixing white cover plate with frame 4 module complete all as specified and directed.

Supply and fixing white cover plate with frame 6 module complete all as specified and directed.

Supply and fixing white cover plate with frame 8 module complete all as specified and directed. (Note for item No 19 to 23 ): Quoted rates shall be included cost of blank plate required to cover the gap of plate.

Supply and laid concealed in surface of wall PVC conduit medium grade heavy duty 25 mm minimum for telephone and TV cable etc complete all as specified and directed.

Supply and fixing LED recessed mounted 2x2 luminaire LED 42 W light fitting energy saving low glare high power mounting on two Nos PVC round/ square block on surface of wall / beam etc incl making all electric connection using three core copper cable drawn through in PVC flexible counduit pipe from ceiling rose to fittings including taking out to unsv old fittings complete all as specified and directed. (Make: Philips full glow series RC 380B LED 425- 6500 G 4 L 60 W 60 PSU OD (HSN code 6405) Bajaj SKYLUX LED Cat No BZRSQL 43W GZ1 CW or Crompton or equivalent make in Appx 'B' make & manufactures)

Supply and fixing LED recessed mounted down 12 W light fitting energy saving low glare high power mounting on two Nos PVC round/ square block on surface of wall / beam etc incl making all electric connection using three core copper cable drawn through in PVC flexible counduit pipe from ceiling rose to fittings including taking out to unsv old fittings complete all as specified and directed. (Make: Philips (Green LED I) cat No DN 193B LED 12S-3000 PSU WH S2 or make Bajaj Cat No (AMERIS LED) Cat No BXTAR 30W LED WH or Crompton equivalent make in Appx 'B' make & manufactures)

Supply and fixing LED light fitting with frame, driver etc in 21 W 4 feet long white colour mounting on tow Nos of PVC round/ square block on surface of wall / beam etc incl making all electric connection using three core copper cable drawn through in PVC flexible counduit pipe from ceiling rose to fittings including taking out to unsv old fittings complete all as specified and directed. (Make: Philips (Smart bright series) BN 021 LED 25S 6500 PSU GR S1 or Bajaj (flexitron LED) BLTRU 20W NW VIVA or Crompton equivalent make in Appx 'B' make & manufactures) (for un-ceiling covered area)

Supply and fixing LED tube light fitting with frame, driver etc in 10 W 2 feet long white colour mounting on tow Nos of PVC round/ squire block on surface of wall / beam etc incl making all electric connection using three core copper cable drawn through in PVC flexible counduit pipe from ceiling rose to fittings including taking out to unsv old fittings complete all as specified and directed. (Make: Bajaj cat No BCLSB 10W NW or Philips or Crompton equivalent make in Appx 'B' make & manufactures)

Supply and fixing angular base plate type PVC holder with 10 W LED LED bulb in given colour incl making all electric connection using three core copper cable drawn through in PVC flexible counduit pipe from ceiling rose to fittings including taking out to unsv old fittings complete all as specified and directed. (Make: Bajaj / Havells or Crompton equivalent make in Appx 'B' make & manufactures)

S&F in replacement of energy saving, decorative type LED post top luminaire 40 watt with high power LEDs light with IP65 protection, including control box with switch, GI pipe light grade in required size/lenth grouting in main entrance gate and making all connection using three core copper felexible cable drawn through in flexible PVC conduit pipe from control box to light fittings including full body covered wire mesh net to be protect monkey made out by 2 MM GI wire and angle iron frame in size 25 x 25 x 4 MM thick incl grouting in piller post complete requiered work as per site complete all as specified and directed. (Note: Quoted rate shall be included the cost of required cement work and full body covered wire mesh net to be protect monkey made out by 2 MM GI wire and angle iron frame in size 25 x 25 x 4 MM thick incl grouting in piller post complete requiered work as per site). (Make : Cat part No- LHEVBHP7PN6K040 of Havells or equivalent make in Appx 'B' make & manufactures)

Supply and fixing LED street/ Bldg security light fittings 60 watts energy saving incl making all electric connection using three core copper cable drawn through in PVC flexible counduit pipe from ceiling rose to fittings and mounting bracket made out by GI pipe light grade in 25 mm dia of bore in required length bend in 120 degree fixed with clamp made out by GI strip in size 32 x4 mm using nut bolt and washer etc complete all as specified and directed. (Make: Bajaj Cat No BRTFG 60 W LED V3 WW/ Philips/ Crompton or equivalent make in Appx 'B' make & manufactures)

Material and labour for sub main wiring with two runs of single core PVC FRLS IS-694 cable with unsheathed multi-stranded copper conductor of size 10 Sqmm and drawing through in concelead rigid non metallic PVC conduit pipe medium grade heavy duty in suitable size with all necessary fittings including one run of FRLS insulated unsheathed stranded copper conductor cable of size 10 Sqmm as earth wire (green in colour) and connected to common earth dolly complete including taking down of old unserviceable sub main wiring including taking out to old unsv sub main wiring with accessories complete all as specified and as directed. (Note : (i) Two run of 10 sqmm with one run of PVC conduit pipe shall be measured agaist one unit. (ii) Cost of cutting /chasing/ plastering /colouring etc as site shall be included matching to disturbed surface all as existed).

All as above item 32 here in before but three run of 2 Core 6 Sqmm for phase ,neutral and earth wire with suitable size concealed PVC conduit pipe complete.

All as above item 32 here in before but three run of 2 Core 4 Sqmm for phase ,neutral and earth wire with suitable size concealed PVC conduit pipe complete.

Supply and fix sheet metal enclosure distribution board TPN, 4 poles ,double door, 4 way with 200 Amps rated copper bus bar vertcal type with MCCB 4 pole 100 Amps 415 volt thermal megnatic base operated as incomer incl concealed in surface of wall and making all connection using gland , thembles in required size including taking down to old unsv DBs in any make/ model/ way etc with accessories complete all as specified and directed (Note: Quoted rate shall be included cost of MCCB , cutting plastering , colouring to surface of wall to be concealed etc all site required matching with existing surface). (Make: Legrand/ Seimens or L&T or equivalent make in Appx 'B' make & manufactures)

Supply and fix sheet metal enclosure for MCB distribution board SPN, double door, 8 way with 200 Amp rated bus bar 230 Volts including taking down to old unsv DBs in any make/ model/ way etc with accessories complete all as specified and directed.

Supply and fix sheet metal enclosure for MCB distribution board SPN, double door, 4 way with 200 Amp rated bus bar 230 Volts including taking down to old unsv DBs in any make/ model/ way etc with accessories complete all as specified and directed.

S&F to MCCB , 415 volt TPN 4 poles 63 Amps ,16 KA breaking capacity, thermal based adjustable type complete all as specified and directed

Supply and fixing MCB , SPN, 2 pole 220 volts , 63 Amps , "C" Curve 10 KA complete all as specified and directed

Supply and fixing MCB , SPN, 2 pole 220 volts , 40 Amps , "C" Curve 10 KA complete all as specified and directed

Supply and fixing MCB , single pole 215 volts , 32 Amps , "C" Curve 10 KA complete all as specified and directed

Labour for taking down to fan in all make/ model with accessoires safely and take custody for re-use the same on given site including painting in two coats after cleaning and re-fill to filler , making given marking using different colour of paint including repair to unsv fan with required spares such as condensor, extension rod in required length made out by 15 MM light grade GI tubing with "U" Clamp made out by 32x6 MM GI strip , canopy set , bearing nut bolt washer etc all required to made serviceable as site required incl making all electric connection using three core copper cable drawn through in PVC flexible counduit pipe from ceiling rose to fan complete all as specified and directed

Supply and fixing ceiling fan in size 1200 MM sweep white colour 5 star rated copper wound energy saving with set of sweep/ extension rod / "U" clamp and other accessories single phase 50 Hzs incl making electric connection using three core copper cable drawn through in PVC flexible conduit pipe complete all as specified and directed. Make : Usha model EX 3, 1200 MM (white colour) or equivalent make as approved by AGE from Appx 'B' list of make & manufactures)

Supply and fixing of wall mounting fan/ air cerculators heavy duty 450 MM sweep non capacitor bracket mounted type copper wound motor ISI marked 3 star rated energy saving with fixing accessories complete making necessary electric connection allas complete all as specified and directed. (Make: Usha model MAX Air W/F (white colour) or equivalent make as approved by AGE from Appx 'B' list of make & manufactures)

Supply and fixing as new exhaust fan 300 MM sweep steel body heavy duty with louver mounting bracket ISI marked 4 star rated energy saving less noise capacitor type incl making hole in brick wall plastering colour coading and all site required work for disturbed surface matching with existing and making electric connection using three core copper cable drawn through in PVC conduit pipe complete all as specified and directed. (Make : Crompton Greaves / Havells Saahas) (SI 300-6P) (for toilet)

M&L in replacement earthing complete with galvanized steel earth plate 600 x600 x 6mm thick, buried directly in ground (earth pit not less than 2.25 Mtr deep below ground level) with top edge of the plate not less than 1.5 Mtrs below normal ground level, connected to galvanized GI strip 32 x 6 MM as earthing lead by means of bolts, nuts, check nuts & washers of galvanized iron or steel besides building at all joints including excavation and earth work, GI pipe light grade 40 MM bore for protection of GI strip from earth electrode and 15 MM as watering with wiremesh funnel charcoal dust, common salt, PCC (1:2:4) type B-1 using 20 MM graded stone aggregate for chamber and MS angle iron frame 40x40x3 MM and RCC cover 40 MM thick (1:2:4) type B-1 using 20 MM graded stone aggregate reinforced with 6 MM dia round bars @ 75 MM C/C both ways with MS handle 12 MM dia , PGI funnel and wire mesh , 20 MM bore GI Pipe light grade for watering complete all as shown in electrical plate No 3 of SSR Part-I(2009) and connected to earth test point including testing complete all as specified and directed. Note: Earthing strip and protection pipe upto 7.5 metre length shall be deemed to be included in the quoted unit rate. Earthing strip beyond 7.5 metre shall be measured and paid for separately.

M&L in replacement earthing complete with galvanized steel earth plate 600 x600 x 6mm thick, buried directly in ground (earth pit not less than 2.25 Mtr deep below ground level) with top edge of the plate not less than 1.5 Mtrs below normal ground level, connected to galvanized GI wire 4mm dia as earthing lead by means of bolts, nuts, check nuts & washers of galvanized iron or steel besides building at all joints including excavation and earth work, GI pipe light grade 20mm bore for protection of GI wire from earth electrode and 15mm as watering with wiremesh funnel charcoal dust, common salt, PCC (1:2:4) type B-1 using 20mm graded stone aggregate for chamber and MS angle iron frame 40x40x3mm and RCC cover 40mm thick (1:2:4) type B-1 using 20mm graded stone aggregate reinforced with 6mm dia round bars @ 75 mm C/C both ways with MS handle 12mm dia , PGI funnel and wire mesh , 20mm bore GI Pipe light grade for watering complete all as shown in electrical plate No 3 of SSR Part-I(2009) and connected to earth test point including testing complete all as specified and directed. Note: Earth wire and protection pipe upto 7.5 metre length shall be deemed to be included in the quoted unit rate. Earth wire beyond 7.5 metre shall be measured and paid for separately.

Supply connecting testing to three phase energy meter three phase direct connecting current accuracy in range 10-100 Amps class 1.0,(active energy) and class 2.0 (re-active energy) 460 V 50 Hz temper proof flame retardant poly carbonate IP -53 Incl colse cabin made of GI sheet 2 MM thick in three side and front wire cage mounting on angle iron frame in size 25x5 MM fixed with surface of wall using nut bolt and washer etc incl making all connection with out going connection cable for ACs cercuit complete all as specified and directed. (Make : Secure Meter model Sprint Duel 1 or equivalent make as approved by AGE from Appx 'B' list of make & manufactures) (Note :- Test certificate issued by OEM shall be submitted in this office).

Supply and fix in replacement off load change over switch in sheet metal enclosure 4 poles with neutral link , 415 volts, 160 Amps current raiting conforming to IS; 13947 (Part-3): IEC; 60947-3 incl all fixing materriels complete all as specified and directed. (Make :- L&T Cat No. CO21600OSOO or equivalent make as approved by AGE from Appx 'B' list of make & manufactures)

Supply and fix in replacement exsiting unsv LED bulb 12 W complete all as specified and directed. Make : SYSKA SSK - PAG-N-12W or equivelent in Havells / Philips.

M/S R S Traders

Bharat Trading Company

M/S Garg Sons

M/S MALHOTRA ENGINEERING WORKS