CA NO GE(W)/HSR-61/2025-26 REPAIR / MAINT OF MECH LAUNDRY SYSTEM FIRE FIGHTING HEAT AND SMOKE DETECTION SYSTEM EOT OVER HEAD CRANES AND LIFTS INCL CERTAIN ALLIED WORKS AT HISAR MILITARY STATION UNDER GE (W) HISAR

EOT Crane of Capacity 2 Ton

EOT Crane of Capacity 5 Ton

EOT Crane of Capacity 15 Ton

M&L for repair/overhauling/servicing of Main Hoist Gear Box/ Cross travel gear box/ Long travel gear box of flame proof EOT Crane (Make : Rockwell) of following capacity including cleaning, recutting, polishing the gear teeth after remetalling and making good, remetalling of driving shaft, machining, finishing, polishing and making good for smooth running of crane, replacing worn out bushes, bearings on drive and non drive ends, reassembling all the components after necessary repair works, replacing the gear oil of the gear box upto required level, making adjustment to ensure trouble free smooth running of gear system complete all as specified and directed. Notes : (i) Repair/overhauling/servicing of Gear Box shall be carried out through authorized service agency of Original Equipment Manufacturer (OEM). The contractor shall submit documentary proof/evidence in this regard before taking Gear Box under repair, overhauling, servicing, etc. (ii) Make and model of part to be replaced shall be same as used/recommended by OEM. (iii) Gear oil, ball bearing & spare parts as required shall be measured and paid for separately under respective items of this Schedule.

EOT Crane of Capacity 2 Ton

EOT Crane of Capacity 5 Ton

EOT Crane of Capacity 15 Ton

M&L for repair/overhauling the Flame proof electro hydrauilc Thruster & brake of following capacity of EOT Crane (Make : Rockwell) with gear holding brakes of Hoist / Creep / Cross travel and Long travel, rewinding the burnt out winding of electrohydrauiic thruster motor with super enamel copper wire of existing gauge and varnishing, heating and testing etc complete repairing of oil pump by replacing worn out parts, oil seal, ‘O’ ring and bush and bearing - 02 Nos (6201), check nuts, lock pin all as required including draining out old unserviceable oil complete all as specified and directed :- Notes : (i) Repair/overhauling of Thruster shall be carried out through authorized service agency of Original Equipment Manufacturer (OEM). The contractor shall submit documentary proof/evidence in this regard before taking Thruster under repair, overhauling, etc. (ii) Make and model of part to be replaced shall be same as used/recommended by OEM.

Main hoist Thruster of 15 Ton EOT Crane.

Main hoist Thruster of 2 Ton EOT Crane.

Cross Travel Thruster of 15 Ton EOT Crane.

Cross Travel Thruster of 2 Ton EOT Crane.

Long Travel Thruster of 15 Ton EOT Crane.

Long Travel Thruster of 2 Ton EOT Crane.

Main hoist Thruster of 5 Ton EOT Crane.

Cross Travel Thruster of 5 Ton EOT Crane.

Long Travel Thruster of 5 Ton EOT Crane.

Attending, inspection, troubleshooting, repair and rectification of eot crane of any capacity for any type of complaint whether electrical, mechanical or control related including checking of motor, brakes, limit switches, remote control, wiring, contactors, relay, gearbox, coupling, wheel, rails and safety devices includes site visit, inspection, fault diagnosis, minor repair, tightening, alignment complete all as specified and directed. (Note : Contractor shall provide all labour, tools for rectification of fault. Spare parts shall measured and paid seperately under relevant item of BoQ.)

Supply only Hydraulic oil (ISI marked) of approved grade for filling in the electrohydrauilc thruster upto specified level under the relevant item of this Schedule complete all as directed and directed.

Supply only Gear oil (ISI marked) of 80W-90 grade for filling in the gear boxes upto specified level under the relevant item of this Schedule complete all as directed and directed.

Supply only Ball bearing along with shaft seal/ oil seal / 'O' seal / 'V' seal of shaft on main hoist wire rope drum on both side for 15 Ton capacity gear box for main hoist for replacement under the relevant item of this Schedule complete all as directed and directed. Make : TATA / SKF / NBC

Supply only Ball bearing along with shaft seal/ oil seal / 'O' seal / 'V' seal of shaft on main hoist wire rope drum on both side for 2 Ton capacity gear box for main hoist for replacement under the relevant item of this Schedule complete all as specified and directed. Make: TATA / SKF / NBC

Supply only Ball bearing along with shaft seal/ oil seal / 'O' seal / 'V' seal on both side for Cross Travel of 15 Ton capacity EOT Crane for replacement under the relevant item of this Schedule complete all as specified and directed. Make : TATA / SKF / NBC

Supply only Ball bearing along with shaft seal/ oil seal / 'O' seal / 'V' seal on both side for Cross Travel of 2 Ton capacity EOT Crane for replacement under the relevant item of this Schedule complete all as specified and directed. Make : TATA / SKF / NBC

Supply only Ball bearing along with shaft seal/ oil seal / 'O' seal / 'V' seal for Long Travel of 15 Ton capacity EOT Crane for replacement under the relevant item of this Schedule complete all as specified and directed. Make : TATA / SKF / NBC

Supply only Ball bearing along with shaft seal/ oil seal / 'O' seal / 'V' seal for Long Travel of 2 Ton capacity EOT Crane for replacement under the relevant item of this Schedule complete all as specified and directed. Make : TATA / SKF / NBC

Supply only Ball bearing along with shaft seal/ oil seal / 'O' seal / 'V' seal of shaft on main hoist wire rope drum on both side for 5 Ton capacity gear box for main hoist for replacement under the relevant item of this Schedule complete all as specified and directed. Make : TATA / SKF / NBC

Supply only Ball bearing along with shaft seal/ oil seal / 'O' seal / 'V' seal on both side for Cross Travel of 5 Ton capacity EOT Crane for replacement under the relevant item of this Schedule complete all as specified and directed. Make : TATA / SKF / NBC

Supply only Ball bearing along with shaft seal/ oil seal / 'O' seal / 'V' seal for Long Travel of 5 Ton capacity EOT Crane for replacement under the relevant item of this Schedule complete all as specified and directed. Make : TATA / SKF / NBC

Supply and fixing galvanized Steel wire rope conforming to IS-2266-2002 of nominal diameter of 16mm having 6x19M(12/6-1) multi stranded construction steel core CRW grade 1570, having mass 97.4 Kg/100 RM with minimum breaking force of 102 KN suitable for lifting load of 15 Ton including greasing complete all as specified and directed including taking down old unserviceable steel rope. Make : Usha / Bombay Foot / National or as used/recommended by OEM. Notes : (i) The steel rope shall be best performed plough straight non rotating type conforming to IS-2266. (ii) The breaking strength of the rope shall not be less than 6 time the safe working load thereon. (iii) Test Certificate of manufacturer shall be submitted by the contractor.

Supply and fixing galvanized Steel wire rope conforming to IS-2266-2002 of nominal diameter of 9mm having 6x19M(12/6-1) multi stranded construction steel core CRW grade 1570, having mass 30.8 Kg/100 RM with minimum breaking force of 42 KN suitable for lifting load of 2 Ton including greasing complete all as specified and directed including taking down old unserviceable steel rope. Make : Usha / Bombay Foot / National or as used/recommended by OEM. Notes : (i) The steel rope shall be best performed plough straight non rotating type conforming to IS-2266. (ii) The breaking strength of the rope shall not be less than 6 time the safe working load thereon. (iii) Test Certificate of manufacturer shall be submitted by the contractor.

Supply and fix in replacement Power contactor of capacity 70 Amps, AC-03, 415 Volts, 50 Hz, 3 Ph, 4 pole along with auxiliary contacts 2NO + 2NC, Coil voltage - 110 V, complete all as specified and directed.

Supply and fix in replacement Power contactor of capacity 12 Amps, AC-03, 415 Volts, 50 Hz, 3 Ph, 4 pole along with auxiliary contacts 2NO + 2NC, Coil voltage - 110 V, complete all as specified and directed.

Supply and fix in replacement Power contactor of capacity 16 Amps, AC-03, 415 Volts, 50 Hz, 3 Ph, 4 pole along with auxiliary contacts 2NO + 2NC, Coil voltage - 110 V, complete all as specified and directed.

Supply and fix in replacement Power contactor of capacity 32 Amps, AC-03, 415 Volts, 50 Hz, 3 Ph, 4 pole along with auxiliary contacts 2NO + 2NC, Coil voltage - 110 V, complete all as specified and directed.

Supply and fix in replacement Power contactor of capacity 45 Amps, AC-03, 415 Volts, 50 Hz, 3 Ph, 4 pole along with auxiliary contacts 2NO + 2NC, Coil voltage - 110 V, complete all as specified and directed.

Supply and fix in replacement Power contactor of capacity 10 Amps, AC-03, 415 Volts, 50 Hz, 3 Ph, 4 pole along with auxiliary contacts 2NO + 2NC, Coil voltage - 110 V, complete all as specified and directed.

Supply, installation , testing and commissioning of pendant operated push button control station suitable for EOT(any capacity) operation 6 way type, including up, down , north, south, east, west with emergency stop button, heavy duty industrial grade, dust, rain and spalsh proof enclosure suitable for crane duty cycle. Make as used / recommended by OEM, complete all as specified and directed.

S&F in replacement Trailing flexible copper conductor cable (ISI marked) of size 1.5 Sqmm 16 Core, 1100 Volt, with & including movable clamps and single flanged rollers, complete all as specified and directed.

S&F in replacement PVC insulated & FR PVC round sheathed, multi stranded copper conductor cable (ISI marked) steel wire armoured of size 2.5 Sqmm 4 Core, 1100 Volt, complete all as specified and directed.

S&F in replacement PVC insulated & FR PVC round sheathed, multi stranded copper conductor cable (ISI marked) steel wire armoured of size 4 Sqmm 4 Core, 1100 Volt, complete all as specified & as directed.

S&F in replacement PVC insulated & FR PVC round sheathed, multi stranded copper conductor cable (ISI marked) steel wire armoured of size 6 Sqmm 4 Core, 1100 Volt, complete all as specified and directed.

S&F in repair Flame proof Thruster brake shoes for 2 Ton to 15 Ton EOT crane of size 100 mm x 125 mm x 12 mm thick as per existing installed on site with necessary copper rivets etc complete of make 'Ferrodo liner' or 'Usha' or as used / recommended by OEM, complete all as specified and directed.

M&L for disconnecting the flame proof electric motor of capacity upto 5 HP, 3 Phase, 415 Volt from the EOT cranes transporting to workshop, taking out old winding and rewinding the motor with same gauge of copper wire, varnishing, overhauling complete including replacing the ball bearing on both ends, re-fitting to crane, re-connecting and testing complete all as specified and directed.

M&L for disconnecting the flame proof electric motor of capacity upto 5 HP to 10 HP, 3 Phase, 415 Volt from the EOT cranes transporting to workshop, taking out old winding and rewinding the motor with same gauge of copper wire, varnishing, overhauling complete including replacing the ball bearing on both ends, re-fitting to crane, re-connecting and testing complete all as specified and directed.

M&L for disconnecting the flame proof electric motor of capacity 10 HP to 15 HP, 3 Phase, 415 Volt from the EOT cranes transporting to workshop, taking out old winding and rewinding the motor with same gauge of copper wire, varnishing, overhauling complete including replacing the ball bearing on both ends, re-fitting to crane, re-connecting and testing complete all as specified and directed.

Supply and fix in replacement Variable Fequency Drive (VFD) / Vector Inverter / AC drive suitable for 3 phase electric motor used for EOT crane gear working on 3 phase 380- 480V power supply, protective structure enclosed type, cooling system force, permisible frequency fluctuation ±5%, 0.2 Hz- 400Hz having suitable input/output for 1 HP - 15 HP electric motor complete all as specified and directed. Make :- Mitsubishi/ Yaskawa Electric Corporation / CG/ ABB / L&T or as per installed on site as recommended by OEM.

Supply and fix in replacement 3 phase line reactor / choke suitable for Variable Fequency Drive (VFD) / Vector Inverter / AC drive used for upto 15 HP electric motor or 10 Amps capacity (maximum) as per site requirement conforming to IS 2025, 1271, 12021 having inductance 2.5854, terminals for three phase input/ output connection complete all as specified and directed. Make : Standard Magnetic India / The Transformenr company / OM Industries or as per installed on site as recommended by OEM.

Supply and fix in replacement Dynamic Braking Register (DBR), construction type Aluminium house bar having tolerance less than 1 ohm, two terminal end of capacity 250 ohm 400 Watt complete all as specified and directed.

Supply and fix in replacement Dynamic Braking Register (DBR), construction type Aluminium house bar having tolerance less than 1 ohm, two terminal end of capacity 350 ohm 400 Watt complete all as specified and directed.

Supply and fix in replacement Dynamic Braking Register (DBR), construction type Aluminium house bar having tolerance less than 1 ohm, two terminal end of capacity 700 ohm 400 Watt complete all as specified and directed.

Supply and fix in replacement following Spares/Components in EOT Crane of 2 Ton capacity after approval complete all as specified and directed :-

Carbon Brush.

Over Load Relay.

Brake Lining.

Magnetic Coil.

Clutch Plate Pin.

Thrust Bearing.

Gear Wheel.

Clutch Plate.

Pendant auxiliary contacts.

Oil Seal

Supply and fix in replacement following Spares/Components in EOT Crane of 5 Ton capacity after approval complete all as specified and directed :-

Carbon Brush.

Over Load Relay.

Brake Lining.

Magnetic Coil.

Clutch Plate Pin.

Thrust Bearing.

Gear Wheel.

Clutch Plate.

Pendant auxiliary contacts.

Oil Seal

Supply and fix in replacement following Spares/Components in EOT Crane of 15 Ton capacity after approval complete all as specified and directed :-

Carbon Brush.

Over Load Relay

Brake Lining.

Magnetic Coil.

Clutch Pin.

Thrust Bearing.

Gear Wheel.

Clutch Plate.

Pendant auxiliary contacts.

Oil Seal

Supply and fix in replacement following Spares/Components in EOT Crane of capacity 2 Ton to 15 Ton after approval complete all as specified and directed:-

HRC Fuse 40 Amps.

HRC Fuse 32 Amps.

HRC Fuse 16 Amps.

HRC Fuse 10 Amps.

HRC Fuse 2 Amps.

Indicator Lamp LED (RYB) (Set of Three).

M&L for painting of EOT Crane structure, end carriages, trolley, platform, handrail, ladders and all exposed metal parts including scraping by wire brush, removing rust and old paint, dirt, oil and cleaning with solvent applying one coat of approved anti corrosive primer and two coat of synthetic enamenl/epoxy paint. (Note : Contractor shall provide all safety arrangement such as scaffolding, ladders, bamboo staging, man lift or similar arrangement including necessary safety belts, helmets and protective gear)

Routine repair / maintenance of unserviceble lift forthnightly, for a period of one month for lift of 08 passengers with fully automatic electrical operated with microprocessor based control panel, automatic operated sliding doors service ground plus upper two floors (G+2), Make "OTIS' including replacements of minor defective parts like nuts , bolts, control wire , cop's buttons small switches and thimbals etc , installed at MH Hisar installed complete all as specified and directed of the following capacity lift:- (i) Machine room, incl, electric elevator 8 passengers capacity 544 Kgs lifts = 01 NO. Make - OTIS (Note:- Lift will be repair with in 24 Hrs after receiving the complain from user/ Department )

Description all as per item No 44.00 above but Machine room, incl, electric elevator 8 passengers capacity 544 Kgs complete all as specified and directed lifts = 01 Nos, Make -OTIS

S&F in replacement Automatic rescue device( ARDL 7/02 ) Main PCB suitable for Otis make passenger lift complete all as specified and directed.

S&F in replacement LCB main mother board master card complete all as specified and directed.

S&F in replacement SIB board complete all as specified and directed.

S&F in replacement ARD Sealed maintenance free Battery 12V, 7AH or as per existing complete all as specified and directed.

S&F in replacement lock break complete all as specified and directed.

S&F in replacement contactor for drive motor of Cap EPS unto 18.5 KW/IMVF or as per existing complete all as specified and directed.

S&F in replacement contactor LC 1-d186P7 all as per existing complete all as specified and directed.

S&F in replacement LOP (landing Operating Panel) display complete all as specified and directed.

S&F in replacement COP (cabin operating Panel)display all as specified and directed

S&F in replacement DOOR DRIVE suitable for lift all as specified and directed.

S&F in replacement Limit swith complete all as specified and directed.

S&F in replacement Limit Roller complete all as specified and directed.

S&F in replacement Cabin light LED type of 5W suitable for otis lift complete all as specified and directed.

S&F in replacement Reed Switch all as specified and directed.

S&F in replacement Door sensor all as specified and directed.

S&F in replacement hanger Roller all as specified and directed.

S&F in replacement Gear 9550CC suitable for lift all as specified and directed.

S&F in replacement Door Motor with rooler complete all as specified and directed.

S&F in replacement Control box for lift complete all as specified and directed.

S&F in replacement door protection harn cable complete all as specified and directed.

S&F in replacement electronic hooter complete all as specified and directed.

S&F fan metal body size 200/250 sqmm suitable for OTIS lift all as specified and directed by Engr-In-Charge.

S&F in replacement rope size 8/10/13 mm suitable for lifts complete all as specified and directed.

S&F in replacement time off delay for UPS LCB 200 all as specified and directed.

M&L for comprehensive maintenance of Fire alarm systems and fire fighting system check all the fire detector, MCP, Hooter, Fault Isolator and other necessary item if any detector found faulty change the detector with ammendment in software and relocate the location by manufacturer i.e. daily check and cleaning including first hand repair , maint and greasing of moving parts, including minor repairs of electrical panels, instruments starters, etc. completre all as directed for smooth and efficent fucntioning of Fire alarm system at MH (Siemens) & DOT Auditorium (Honeybell) complete all as specified and directed.

M&L for painting of GI Pipe 80 to 200 mm dia two coats of deco paint of approved colour after preparation of surface including filling of depressions over existing surface complete all as specified and directed.(Note : One length of pipe will be considered in each job)

Supply, fixing & testing sluice valve of size 100 mm bore class PN 1.6 cast iron body with forged steel spindle, non rising type & cast iron wheel head, both ends flanged IS-14846 marked, complete including taking down old U/S sluice valve complete all as specified and as directed.

Supply, fixing & testing sluice valve of size 80 mm bore class PN 1.6 cast iron body with forged steel spindle, non rising type & cast iron wheel head, both ends flanged IS-14846 marked, complete including taking down old U/S sluice valve complete all as specified and as directed.

Supply, fixing & testing sluice valve of size 150 mm bore class PN 1.6 cast iron body with forged steel spindle, non rising type & cast iron wheel head, both ends flanged IS-14846 marked, complete including taking down old U/S sluice valve complete all as specified and as directed.

Supply, fixing & testing Non-return Valve cast iron body, ISI marked, heavy duty both ends flanged suitable for 100 mm bore class PN 1.6 pipe fixed in repairs all as specified and directed.

Supply, fixing & testing of Non-return Valve cast iron body, ISI marked, heavy duty both ends flanged suitable for 150 mm bore class PN 1.6 pipe fixed in repairs all as specified and directed.

M & L for RRL hose 15 metre length 63 mm dia with male female coupling, duly ISI marked or IS specification complete all as specified and directed

Supply & fixing Device Loop Card version-2 (Siemens) in repair complete all as specified and directed.

Supply & fixing Multi criteria Smoke Detector suitable for MH fire fighting system complete all as specified and directed. Make: Siemens FDOT-421.

Supply & fixing Manual Call Point complete all as specified and directed.

Supply & fixing Smoke Detector suitable for dot auditorium complete all as specified and directed. Make -Honeybell

Supply & fixing Control Module for firefighting complete all as specified and directed.

Supply & fixing Monitor Module for firefighting complete all as specified and directed.

Supply & fixing Hooter for firefighting complete all as specified and directed.

Supply & fixing Fault Isolator for firefighting complete all as specified and directed.

M & L in repair for Fire hose Reels 20 metre length, 20 mm dia with male female coupling, duly ISI marked or IS specification complete all as specified and directed

S&F 2C x 1.5 sqmm 1100 volt FRLS pvc cable suitable for fire alarm system complete all as specified and directed.

S&F 25 mm PVC conduit pipe for use for fire alarm system complete all as specified and directed.

Repair/ Servicing/painting of Diesel Engine driven (Jockey pump) pump set change oil filter, air filter , Fuel Filter, check the battery terminal and replacement of engine oil and coolant as per standard complete all as specified and directed.

Supply and fixing in replacement of maintenance free battery with cat eye showing charged conditions OF Battery of capacity 150 AH EXIDE XPRESS fully charged complete all as specified and directed.

M&L for cleaning of underground sump/ raw water tank of capacity 1 LG by taking out silt mud and vegetable growth etc in shape of sludge including residual water and disposal of the same n.exc 50 mtr away scrapping of internal surface of walls, floors with wire brush , brooms jute, appliying one coat of lime wash internally complete all as specified and directed.

M&L for rewinding of electric motor of 3 Phase, 415 Volts, Cap 15 HP, after dismantling the stator and rotor, removing burnt windings, cleaning the slots, rewinding the motor with super enamelled quality hermatic grade copper winding wire of proper gauge and number of turns as per the existing windings including numex paper, glass paper, thimble, glass sleeves, main lead, back doll, Varnish and drying in oven including fitments of thermostate protection relay and bearing of specified type, including required nut bolts (stainless steel) reassembling and air testing to ensure leak lightness of the joints complete all as specified and directed.

Dismantling of 75 HP motor electric from foundation and pump opening the same and only serviceing of motor by cleaning internally and externally, varnishing of winding, checing of stator, greasing of bearing, fittings allignment, connecting electrically re-fixing and testing the job shall be done at plant only complete all as specified and directed.

S&F in repair contactor MNX 80 complete all as specified and directed.

S&F in repair contactor MNX 18 to 32 complete all as specified and directed.

S&F in repair relay MNX A-2 complete all as specified and directed.

S&F in repair indicator switch LED type R,Y,B as per site requirement all as specified and directed

M&L for repair of panel door and lock arrangement and painting of full body of panel with two coats of deco paint of approved colour after preparation of surface including filling of depressions over existing surface complete all as specified and directed.

S&F network interface card suitable for repeater pannel for firefighting complete all as specified and directed.

S&F in replacement of industrial pressure switch as per existing size complete all as specified and directed.

M&L for comprehensive maintenance/Servicing of steam heated laundry plant and NON IBR steam Boiler of cap 600 Kg per hours steam at 10.5 Kg / Sqcm pressure comprising of washing machine, washer extractor hydro extractor drying tumbler, flat work ironer, flat bed press, air compressor, auto claving machine and matteress sterlizer as per instruction laid down by manufacturer i.e. cleaning including first hand repair , maint and greasing of moving parts, including minor repairs of electrical panels, instruments starters, etc. completre all as directed for smooth and efficent fucntioning of laundry plant comprising of the following machines and equipments :- (i) Commercial type washing machine steam heated front loaded type 50 Kgs capacity fully automatic . - 04 Nos Model : LEW/F/50 Make : Lucky Engineering Works (ii) Hydro extractor top loading type self balancing direct driven with DG injection break fully automatic - 04 Nos Model : LEW/H/25 Make : Lucky Engineering works (iii) Hygenic washer extractor (sluicing machine) steam heated 25 Kg capacity - 02 Nos (iv) Roll callender machine (flat work ironer) steam heated having roller of size 470 x2100 m m complete with controls and motor - 02 Nos Model: LEW/FW. Make: Lucky Engineering works. (v) Flat Bed press steam heated head size 750 x 1500 mm auto matic with control model LEW/FBP - 04 Nos Model : LEW/FBP Make : Lucky Engineering Works (vi) Auto claving machine steam operated 25 Kg capacity complete with accessories - 02 Nos Model : LEW /DT/50 Make : Lucky Engineering Works (vii) Steam operated matteress sterilizers heavy duty 42" x 48" x 48" confirming jto IS- 3829 complete with all assessories i.e Vaccum pump loading carrage and transfer trolley etc cap 150 Kg - 01 Nos Make : MEDIQUIP (viii) Drying tumbler steam heated front loaded type open pocket 50 Kg capacity fully automatic - 04 Nos (ix) Reciprocating air cooled compressor with 250 ltrs cap air tank with motor. - 02 Nos Make : Elgi (x) NON IBR steam boiler of cap 600 Kg /Per hour at 10.5 Kg per Sqcm complete with all safety control oil service tank, water service tank incl MS piping - 02 Nos Make : Thermax Model : RXA06/10.54/HSD FIRED -

Supply & Fixing Rubber Ring For Door,(of Front Loading washing Machine 50 KG) complete all as specified and directed.

Supply & Fixing Rubber Ring For Door,(of Front Loading washing Machine 25KG) complete all as specified and directed.

Supply & Fixing Contactor suitable for washing machine (18.5 KW) MNX 25 complete all as specified and directed.

Supply & Fixing Push Button Assembly, complete all as specified and directed.

Supply & Fixing Indicator Light, complete all as specified and directed.

Supply & Fixing OFF Delay Timer, complete all as specified and directed.

Supply & Fixing Timer 0-15, complete all as specified and directed.

Supply & Fixing Limit Switch, complete all as specified and directed.

Supply & Fixing Door Lock, complete all as specified and directed.

Supply & Fixing V-Belt for Main Pulley, ( for Sluicing machine) complete all as specified and directed.

Supply & Fixing V- Belt for Idler Pulley, ( for Sluicing machine) complete all as specified and directed.

Supply & Fixing V-Belt for Main Pulley,(of Front Loading washing Machine) complete all as specified and directed.

Supply & Fixing V- Belt for Idler Pulley,(of Front Loading washing Machine) complete all as specified and directed.

Supply & Fixing V-belt, (for Flat work Ironer)complete all as specified and directed.

Supply & Fixing Micro Processor Cyclic Timer, complete all as specified and directed.

Supply & Fixing Steam Valve, complete all as specified and directed.

Supply & Fixing Water Inlet Valve, complete all as specified and directed.

Supply & Fixing Toggle Switch, complete all as specified and directed.

Supply & Fixing Motorized Drain Valve, complete all as specified and directed.

Supply & Fixing Hose Pipe for Steam, complete all as specified and directed.

Supply & Fixing Hose Pipe for Water Inlet, complete all as specified and directed.

Supply & Fixing Hose Pipe for Drain, complete all as specified and directed.

Supply & Fixing Door Nub, complete all as specified and directed.

Supply & Fixing Chain, complete all as specified and directed.

Supply & fixing Conveyor belt, suitable for system as per existing complete all as specified and directed.

Supply & Fixing Toughened Door Glass, complete all as specified and directed.

Supply & Fixing Door Handle with Lock, complete all as specified and directed.

Supply only Pump seal as per existing complete all as specified and directed.

Supply & Fixing Burner nozzle, complete all as specified and directed.

Supply & Fixing Photocell,as per existing suitable for boiler complete all as specified and directed.

Supply & Fixing Press switch,THERMAX/PS as per existing complete all as specified and directed.

Supply & Fixing Flame coke, complete all as specified and directed.

Supply & Fixing Filter suitale for boiler complete all as specified and directed.

Repair to air pressure pipe line with connnected accessories complete all as specified and directed.

M&L Cutting of old burnt winding and re-winding of electric motor 3 to 5 HP, 415 volts 3 phase, 50 Hz with super enamelled copper wire of superior quality as per existing gauge incl varnishing insulating material complete and replacement of defective bearing, greasing, oiling etc incl re-assembling, transporting, fixing in position, making connection, commissioning & testing complete all as specified and directed.

Please Enable Macros to View BoQ information