Construction of Junior Engineer office cum residene at Gaura RD28/360

Amount

Cutting in earth work in all heights and depths in all kinds of soils, including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock, with chiselling and wedging out of rock; (where blasting is prohibited) and their intermediate classification of soils including dewatering wherever required, setting out to required lines, levels as shown on the drawing and as directed by the Engineer-in- Charge at site, according to the H.P.PWD. specification of 1990 (One thousand Nine hundred Ninety) Volume-I and sorting out useful & unuseful materials and transportation of the unuseful materials on approved dumping sites or otherwise (to be arranged by the contractor including payment of prescribed dumping charges of Municipal Committee / Local body if levied any) to the satisfaction of Engineer in Charge through all modes of transportation including head load, animal load or mechanical means along with its levelling, fine dressing and with all kind of labour, machineries, tools, equipments and safety measures and incidentals necessities to complete the work by mechanical means and labour (if any required). All useful materials, such as stones, shingles, aggregate and slates shall be probably stacked at site to the maximum possible extent in all leads and lifts through all modes of transportation and used / removed as per the direction of Engineer in Charge. Any loss to the public and private property during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects, including all incidental charges.

Excavation in foundation and trenches in earth work in all heights and depths in all kinds of soils, including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock, with chiseling and wedging out of rock;(where blasting is prohibited) and their intermediate classification of soils including ,dewatering wherever required, setting out to required lines, levels as shown on the drawing and as directed by the Engineer-in- Charge at site, according to the H.P.PWD.specification of 1990 volume-I and sorting out useful & unuseful materials and stacking the same in all leads and lifts and leveling of surplus excavated earth on approved dumping sites through all modes of transportation including head load, animal load or mechanical means along with its leveling fine dressing and all labour, machineries, materials, tools equipments and safety measures and incidentals necessary to complete the work by mechanized means and labour (if any required) .All usefull materials, such as stones, shingles, aggregate and slates shall be sorted along road side to the maximum possible extent in all leads and lifts through all modes of transportation. Any loss to the public and private property during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects, including all incidental charges.

Earthwork in excavation for all type of road structures such as retaining wall, breast wall, culvert, drain and parapets etc. in all type of classification of soil comprising of ordinary soil, ordinary rock, hard rock chiesling / wedging out rocks (where blasting is prohibeted). Dimesions and other particulars as per drawing and Technical Specification Clause 305.1(Three hundred Five point One) including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and its disposal including dressing of sides and bottom and backfilling in trenches with excavated suitable material, trimming, filling of unevenness blindages and finishing of the road to specified dimensions. All work of excavation by blasting shall be carried out by taking all necessary precautions against soil erosions, damage to hill side, water pollutions etc., and to protect stability of hill side rock. Stacking of materials useful for construction at suitable sites and safe disposal of unserviceable excavated materials in specified manners to dumping site (to be arranged by the contractor) or as directed by the Engineer-in-Charge. Any loss to the public or private property during the course of execution shall be the sole responsibility of the contractor, which shall have to be duly compensated by him at his own cost of all cases.

Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts.

Providing form work with steel plates 3.15 (Three point One Five ) millimeters thick welded with angle iron in frame 30*30*5 (Thirty into Thirty into Five ) millimetres,so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battens and ballies in all heights of propping and centering below supporting floor to ceiling and removal of the same in-situ-reinforced concrete and plain concrete work as per HP.PWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Foundation, footings and bases of columns etc. and mass concrete.

Flat surfaces such as soffits of suspended floor, roofs, landings and the like floors etc. upto 200mm in thicknss.

Beams, cantilevers, girders and lintels. Sides and soffits of beams, beam hunching cantilevers, bressumers and lintels in all depths and in all heights from floor.

Columns, Pillars, Posts and struts. Square, rectangular or polygonal in plan.

Stair cases with sloping or stepped soffits excluding landings.

Edges of slabs and breaks in floors and walls under 20 (Twenty) centimeters wide.

Vertical surfaces such as walls (any thickness partitions and the like i/c attd. Buttresses, pilasters plinth and string courses and the like.

Providing and laying cement concrete 1:4:8 [ One cement isto Four sand isto Eight graded crushed hard stone aggregate 40 (Forty) millimeters nominal size] mechanically mixed, and curing complete , excluding cost of form work in foundation and plinth, as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing and Laying concrete 1:4:8 (one cement isto four sand isto eight graded stoe aggregate 40 mm (forty milimeters) nominal size) for plain concrete in open foundations complete as per drawing and technical specification clauses 802, 803, 1202 and 1203 (eight hundred two,eight hundred three,one thousand two hundred two & one thousand two hundred three) including carriage of all labour equipments and material to various location through all modes of transportation in all leads and lifts as per the direction of the Engineer-in-charge .

Providing and laying cement concrete 1:6:12 [One cement isto Six sand isto Twelve graded crushed hard stone aggregate 40 (Forty) millimeters nominal size] mechanically mixed and curing complete, excluding cost of form work in foundation and plinth, as per H.P.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and laying cement concrete 1:3:6 [One cement isto three sand isto six graded crushed hard stone aggregate 40 (Forty) millimeters nominal size] mechanically mixed, vibrated and curing complete, excluding cost of form work in foundation and plinth, as per H.P.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and laying cement concrete 1:2:4 [ One cement isto Two sand isto Four graded hard stone aggregate 20(Twenty) millimeters nominal size] reinforced concrete chajjas not exceeding 10 (Ten) centimeters in thickness mechanically mixed and vibrated in all floors up to all heights and levels including finishing the exposed surfaces with cement mortar 1:3 (One cement isto Three sand) to give a smooth and even surface centering/form work and curing complete but excluding cost of reinforcement, as per H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and laying cement concrete 1 :1.5 :3 [ One cement isto One and half sand isto Three graded hard stone aggregate 20 (Twenty) millimeters nominal size] conforming to grade M-25 (M-Twenty Five) mechanically mixed and vibrated and curing complete, excluding cost of form work and reinforcement for reinforced concrete work, as per H.P. PWD. specification 1990 volume - I, including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges. The rate comprising of octroi, royality, Malkana toll tax, sale tax or any other taxes imposed by the Government in:-

Foundation, footings, bases of columns and the like mass concrete in all depths and levels.

Suspended Floors, roofs and landing, shelves and their support in all floors up to all heights and levels.

Columns, pillars posts and struts in all floors up to all heights and levels.

Lintels, beams girders bressumers and cantilevers upto floor two level.

Stair cases (except spiral stair cases) excluding landing but including preparing of the surface and finishing of nosing in all floors up to all heights and levels.

Providing tor steel reinforcement for reinforced cement concrete work including bending binding and placing in position including cost of binding wire complete as per structural drawing in all floors up to all heights and levels, direction of Engineer-in-Charge and as per HP.PWD. Specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Second class brick work using common burnt clay building bricks in super structure above plinth level in all floors up to all heights and levels in cement mortar 1:6(One cement isto Six sand) as per HP.PWD specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Second class half brick work using common burnt clay building bricks above plinth level in all floors up to all heights and levels in cement mortar 1:4 (One cement isto Four sand) as per HP.PWD specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Stone filling dry hand packed tightly in foundation & plinth as per H.P.PWD. Specification 1990 volume- I, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges. The rate comprising of octroi, royality, Malkana toll tax, sale tax or any other taxes imposed by the Government.

Boulder filling dry hand packed tightly in wire cratesvertical bunds with sloping face (wire crates to be measured separately) as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Backfilling behind abutment, wing wall and return wall, breast walls, retaining walls and parapets up to all heights, depths and levels complete as per drawings and technical specification clause 1204.3.8 (one thousand two hundred four point three point eight) Granular material, including carriage of all labour equipment and materials to various location of site through all modes of transportations in all leads lifts and all incidental charges.

Providing weep holes in brick masonry/stone masonry/plain reinforced concrete abutment, wing wall, return wall with 100mm (one hundred millimeter) dia PVC pipe extending through the full width of the structure with slope of 1 (V):120 (one hundred twenty) (H) towards drawing face complete as per drawing and technical specification clause 614, 709, 1204.3.7(six hundred fourteen, seven hundred nine, one thousand two hundred four point three point seven) as per MORD specification including carriage of all labour, equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing and fixing Second class deodar wood in frames of doors, windows, clerestory windows and other frames wrought,framed and fixed in position as per HP.PWD specification , including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 40 mm (Fourty milimetres) thick second class deodar wood panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws as per H.P.PWD. Specification 1990 volume- I, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing wire gauge shutters using galvanized mild steel wire gauge of I.S. gauge designation 85 G (Eighty Five G) with wire of dia 0.56 (Zero point Five Six) millimeters for door, windows and clear story windows including bright finished black enameled iron hinges with necessary screws 40mm (forty millimeter) thick second class deodar wood as per HP.PWD specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing and fixing brass curtain rail with rollers stop ends and brackets in pelmets instead of wooden curtain rod 25 mm (twenty five milimeter) dia and brackets of first class deodar wood (actual lenght) of rails to be measured as per HPPWD specification 1990 ( one thousand nine hundred ninety ) volume-1 including carriage of material thrtough all modes of transport including all incidentals in all leads and lifts and as per direction of Engineer in Charge.

Providing and fixing 19 (Nineteen) millimeters thick commercial board water proof shutters for cup board with hard wood edging on exposed surface, including fixing with nickel plated piano hinges with screws complete as per HP.PWD specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing and fixing 1 (One) millimeters thick coloured and plain laminated sheet (sunmica) on boards/plywood sheets with approved adhesive and nails etc. complete as per direction of the Engineer-in-Charge and HP.PWD specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing and fixing 19 (Nineteen) millimeters thick water proof commercial board with hard wood edging in shelves/box of cup boards with hard wood edging on exposed surface including nickel plated piano hinges with necessary screws complete as per drawing and direction of the Engineer-in-Charge and H.P.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing M S Plain grills of required pattern in windows etc. with M S flats 20*5mm (twenty into five milimeters) and 8*8 mm (eight into eight milimeters) square bars with screws etc. as per HPPWD specification 1990 ( One thousand nine hundred ninety) volume-1 ( One) including carriage of all equipments and labour to various locations through all modes of transportation in all leads and lifts as per direction of engineer in charge.

Providing 40x3mm (forty into three milimeters) flat iron hold fast 40cm.(forty centimeters) Long including fixing to frame with 10mm (ten milimeters) diameter bolts & nuts and wooden plugs and embeding in cement concrete block 30x10x15cm. (thirty into ten into fifteen centimeters) 1:3:6 ( one cement isto three sand isto six graded stone aggregate 20mm (twenty milimeters) nominal size) as per direction of Engineer in Charge and as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts and all incidental charges.

Providing and fixing anodized alluminium Tower bolts (barrel type) anodized transparent or dyed to required shade and color with screws etc. Complete as per HP.PWD. Specification 1990 volume-I, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges. The rate comprising of octroi, royality, Malkana toll tax, sale tax or any other taxes imposed by the Government.

250*10(Two Hundred Fifty into Ten) millimeters size.

150*10 (one hundred fifty into 10) millimeters size.

Providing and fixing 300 X 16 mm (three hundred into sixteen milimeter)aluminium sliding door bolts (Barrel type) anodized transparent or dyed to required shade and colour with bolts and nuts etc. complete including carriage of materials in all leads and lifts as per HP.PWD. Specification 1990 volume-I, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing bright finished brass handles with screws etc. Complete as per HP.PWD. Specification 1990 volume-I, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

125mm (one hundred twenty five millimeter)

75 mm ( Seventy five millimeter)

Providing and fixing 150 (One Hundred Fifty ) millimeters size oxidized M.S. hooks and eyes complete as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 100mm (one hundred milimeter) bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and laying Duro stone vetrified tiles (300x300mmx10mm) in grey/coloured or of approved shade in flooring, treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Kota stone slab flooring 25mm (twenty five millimeter ) thick over 20mm(twenty millimeter) average thick base of cement mortar 1:4(one cement : four sand) laid over and jointing with gery cement slurry mixed with pigment to match the shade of the slab as per direction of the Engineer-in-Charge. as per drawing, HP.PWD. specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One) including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Kota stone slab 25mm(twenty five millimeter)thick in risers of steps, skirting dado and pillars laid on 12mm(twelve millimeter (average)thick cement mortar 1:3(one cement: three sand)and jointed with gray cement slurry mixed with pigment to match the shade of the salbs including rubbing and polishing complete as per drawing, HP.PWD. specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 10mm (ten milimneter) thick anti skid water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalant 600mmx 600mmx 10mm (six hundred into six hundred into ten milimeters) manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm (twelve milimeters) thick cement mortar 1:3 (one cement isto three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete as per HP.PWD. Specification 1990 volume-I, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and laying Duro stone vetrified tiles (300x300x8mm) (three hundred into three hundred into eight milimeters) in grey/coloured of required shade in skirting risers of steps and dados on 12mm (twelve milimeters) thick cement mortar 1:3 (one cement isto three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per HP.PWD. Specification 1990 volume-I, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and laying granite stone(Table rubbed and polished) in flooring, wall lining/ dedo 20mm (twenty milimeter) (average) thickness base of cement mortar 1:3(one cement: three sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete. 20mm(twenty milimeter).thick as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidential charges

Providing and fixing 15cm (fifteen centimeter) wide 45cm (forty five centimeter) over all semicircular plain G.I. sheet gutter with iron brackets 40x3mm(forty into three milimeter) size bolts and nuts and washers etc. including making necessary connections with rain water pipe complete as per design:-0.63mm(zero point sixty three milimeter) thick sheet as per HP.PWD. specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One),including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing on wall face PVC (D-Plast) rain water pipes 100mm (One hundred millimeters) dia pipe of working pressure not less than 4.5 (Four point Five) kg/sqm. Including filling the joints with approved adhesive complete as per HP.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 150mm (One hunderd fifty millimeter) dia PVC Plain bend as per direction of Engineer in Charge as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts and all incidental charges.

Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge and as per Architectural drawing including hoisting of material in all heights and levels, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing ridges or hips 60 cm overall with 0.60mm thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges and as per Architectural drawing including hoisting of material in all heights and levels, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing M.S. BP sheet 1.66 mm (one poine sixty six millimeter ) to 2 mm (two millimeter) thick in eaves board/facia/soffits ceiling including cutting fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-Charge (base members of steel work shall be measured and paid for separately) work as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting ,fixing in position and applying a In beams joists channels ,angles , tee ,flats with connecting plates or angle cleats as in main and cross beams,hip and jack rafters,purlins connected to common rafters and the like as per HP.PWD. specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One),including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges and as per direction of engineer in charge.

Providing and fixing moulded hand rail of M.S. hollow pipe 50mm (fifty millimeter) dia welded in straight lenght over M.S. flat at top of vertical balusters including one coat of red oxide priming coat complete (M.S. flat & balusters of railings shall be mesaured & paid separately)as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I (one), including carriage of all labour equipments and materials to various location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Steel work welded in built up sections, trusses and framed work, in gratings framed guards bars ladders, railing brackets and similar work, including cutting hoisting in all heights and levels, fixing in position and applying a priming coat of red lead paint completer in all respect as per direction of the Engineer-in-Charge and as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Applying priming coat over new steel & other metal surfaces after & including preparing the surface by thoroughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand paper complete. With ready mixed priming paint brushing red lead,Red-oxide/zinc oxide chrome as per direction of the Engineer-in-Charge. as per drawing, HP.PWD. specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One) including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Painting two coats with white ready mixed paint. (excluding priming coat on new steel and other metal surface under coat with ready mixed paint brushing to give an even shade including cleaning the surface all dirt, dust and other foreign matter as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Applying priming coat over new wood and wood based surfaces after and including preparing the surfaces by thoroughly cleaning oil, grease dirt and other foreign matter sand papering and knotting with ready mixed paint brushing wood primer pink as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Painting two coats with Ready mixed paint others then white (excluding priming coat) on new wood and wood based surfaces, with ready mixed paint, brushing to give an even shade including cleaning of all dirt, dust and other foreign matter sand papering and stopping as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

15 (Fifteen) millimeters thick cement plaster in single coat on the fair side of brick/concrete/ stone walls for interior plastering up to all heights including arises. Internal rounded angles, chamfers and/or rounded angles not exceeding 80 (Eighty) millimeters in girth and finished even and smooth in cement mortar 1:6(One cement: Six sand)as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges

15 (Fifteen) millimeters thick cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering up to all heights including arises. Internal rounded angles, chamfers and/or rounded angles not exceeding 80 (Eighty) millimeters in girth and finished even and smooth in cement mortar 1:6 (One cement isto Six sand), as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

6 mm. (six milimeter) thick cement plaster in cement mortar 1:3(one cement : three sand) in ceiling an soffits of stairs as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges

Applying Birla white wall cure putty over plaster surface after thoroughly brushing the surface free from mortar drops dust loose materials and other foreign matter sand papered smooth to give final mattr finished to the surface complete as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipment and material to various locations through all modes of transportation in all leads and lifts including all incidental charges.

Wall painting (two coats) with acrylic emulsion paint of approved brand and manufacture for ifor interior grade on undecorated concrete/ stone/ plastered wall surfacesto give an even shade including t horoughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface including carriage of materials within all leads and lifts.

White washing with lime on undecorated ceiling and/or sloping roofs surface two coats to give an even shade including thoroughly brooming the surface to remove all dirt, dust, mortar dirt and other foreign matter as per HP.PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all lead and lift, including all incidental charges. .

Providing plinth protection 50mm (fifty millimeter) thick in cement concrete 1:3:6 (one Cement : three Sand : six graded stone aggregated 20mm (twenty millimeter) nominal size) as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Constructing course rubble hammer dressed 'U' shape open surface drain with side wall,15*22(Fifteen*Twenty Two) centimeters in cement mortar 1:6 (One cement isto Six sand)and inside plastering with cement mortar 1:3(One cement: Three sand)including earth work and laying 10(Ten) centimeters cement concrete in 1:5:10 {One cement isto Five sand isto Ten graded hard stone aggregate 40 (Forty) millimeters nominal size} and7.50 (Seven point Five Zero) centimeters cement concrete 1:2:4 (One cement isto Two sand isto Four graded hard stone aggregate 20 (twenty)millimeters nominal size}and finished with a floating coat of neat cement complete as per standard design and HP.PWD specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing sand cast / cast iron spun spigot and socket soil, waste and ventilating pipes (Lead caulked joints to be measured and paid for separately) as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing C.P. brass angle valve 15mm (fifteen milimeters) dia without Nuts and pipe as per the direction of Engineer in Charge as per HP.PWD. Specification i/c carriage of all labour, equipment and material to various location through all modes of transportation in all lead and lifts i/c all incidental charges.

Providing and fixing 15mm ( Fifteen milimetre) diameter brass stop cocks as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 15mm (fifteen milimeter ) mixer for kitchen sink with top / bottom swinging spout as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing G.I./M.I Union 15 mm dia (fifteen milimeter ) dia as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing & fixing 100mm(one hundred millimeter dia) C.P. grating of superior quality for gully/floor/Nahani trap as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing liquid soap container with C.P. Brass lid and brackets fixed to wooden plugs with C.P. Brass screws as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipment and material to various location through all modes of transportation in all lead and lift, including all incidental charges.

Providing and fixing chromium plated brass soap dish with C.P. Brass brackets fixed to wooden cleats/ rawal plugs with C.P. Brass screws in all respect as per the direction of Engineer in Charge and as per HP.PWD. Specification i/c carriage of all labour, equipment and material to various location through all modes of transportation in all lead and lifts i/c all incidental charges.

Providing and fixing 15 mm (fifteen milimeter ) bore PVC connection pipes 30/45 cm long as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 150 mm (one hundred fifty milimeters) dia high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete as per direction of Engineer in Charge and as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts and all incidental charges.

Providing and fixing 110 mm X 75 mm dia (one hundred ten into seventy five milimeter ) PVC reducer ISI marked including jointing with approved adhesive etc. complete as per HP.PWD. Specification i/c carriage of all labour, equipment and material to various location through all modes of transportation in all lead and lifts i/c all incidental charges.

Providing and fixing 150mm(one hundred fifty milimeter) PVC door bend with oval access door, insertion rubber washer 3mm (three milimeter) thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete:- as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Providing and fixing plastic seat (Solid / Hollow type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers :white plastic seat and cover as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing Anglo Indian Universal closet of Vitreous China wash down, water closet European type. W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1(One cement isto one sand) (Seat and over to be measured and paid for separately) as per the direction of Engineer in Charge and as per HP.PWD. Specification i/c carriage of all labour, equipment and material to various location through all modes of transportation in all lead and lifts & all incidental charges.

Providing and fixing 100 mm size Vitreous China 'P' or 'S' trap for water closet ( squatting pan)including jointing the trap with the pan and soil pipe in cement mortar 1:1( one cement isto one sand) as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Providing and fixing 10.0/12.50/15.00 (ten point zero/twelve point fifty/fifteen point zero) liters vitreous china low level flushing cistern with a pair of C.I. or mild steel brackets, complete with fitting such as lead valve less syphon, 15mm(fifteen milimeter) nominal size brass ball valve with polythene float, C.P. Brass handle, unions and couplings for connections with inlet, outlet and overflow pipes, 40mm(forty milimeter) dia C.O. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe tobe measured and paid for separately) as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Providing and fixing vitreous China pedestal for wash basin complete recessed at the back for the reception of pipes and fittings as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 100mm sand cast iron grating for gully, floor or Nahni trap as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipment and material to various location through all modes of transportation in all lead and lift, including all incidental charges.

Providing and fixing 600mm x 450 mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P. Brass screws and washers complete in all respect as per the direction of Engineer in Charge and as per HP.PWD. Specification i/c carriage of all labour, equipment and material to various location through all modes of transportation in all lead and lifts i/c all incidental charges.

Providing and fixing 750mm x 20mmm C.P. Brass Towel rail complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass screws in all respect as per the direction of Engineer in Charge and as per HP.PWD. Specification i/c carriage of all labour, equipment and material to various location through all modes of transportation in all lead and lifts i/c all incidental charges.

Providing and fixing 600mmx120mm glass shelf with C.P. brass bracket and guard rail complete, fixed to wooden/ rawal plugs with C.P. brass screws in all respect as per the direction of Engineer in Charge and as per HP.PWD. Specification i/c carriage of all labour, equipment and material to various location through all modes of transportation in all lead and lifts i/c all incidental charges.

Providing and fixing recessed Roll type toilet paper holder (Vitreous China) as per the direction of Engineer in Charg as per HP.PWD. Specification i/c carriage of all labour, equipment and material to various location through all modes of transportation in all lead and lifts i/c all incidental charges.

Providing and fixing 110 mm (one hundred ten milimeter) dia PVC cowl ISI marked including fixing with approved adhesive etc. complete as per HP.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing PVC water storage tank 1000 (thousand) litres net capacity tank of ISI : 12701 marked, G.I. inlet and outlet connection, 15mm (fifteen milimeters) nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level as per direction of Engineer in Charge and as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts and all incidental charges.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete as per HPPWD specification 1990 ( One thousand nine hundred ninety) volume-1 ( One) including carriage of all equipments and labour to various locations through all modes of transportation in all leads and lifts as per direction of engineer in charge.

Providing and fixing 100mm (Hundred melimeter ) dia C.P. Brass shower rose with 15mm or 20mm inlet as per HP.PWD. Specification i/c carriage of all labour, equipment and material to various location through all modes of transportation in all lead and lifts i/c all incidental charges.

Providing and fixing PVC clamps ISI marked of approved design to PVC pipes with steel and rawal plugs completed as per direction of the Engineer-in-Charge and H.P.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing stainless steel kitchen sink of approved standard ISI make with drain board and C.P. waste with C.I. or M.S. Brackets painted white including cutting holes and making good the same but excluding fitting as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Supplying and filling brick bats in soak pit as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location of site through all modes of transportation in all leads and lifts, including all iincidential charges.

Supplying cast iron cover without frame for manholes of internal diamension 455mmx610mm(four hundred fifty five into six hundred ten milimeter) rectangular C.I. cover (light duty single seal pattern-1) the wieght of cover to be not less than 23kg(twenty three kilogramme) as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location of site through all modes of transportation in all leads and lifts, including all iincidential charges.

harry construction and construction

Sanjay Kumar

Hanish Mehta

suman kumar sharma

Hitender Krishan