Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 2₹77.6 L−₹84,277.96 (9.78%)Accepted-AOC 861 SECTOR 47 GURGAON HARYANA 122018 | GURUGRAM | HARYANA | 122018 | 2 | Accepted-AOC Lowest Bid Quoted | |
| 2 | 1₹8.6 LRejected-Finance UNIT NO B1 609 SUNCITY AVENUE KHERKI DAULA VILLAGE ROAD TEHSIL MANESAR SECTOR 76 GURGAON HARYANA 122004 | GURUGRAM | HARYANA | 122004 | 1 | Rejected-Finance Higher bid | |
| 3 | Rejected-Technical F 26 TARUN NAGAR PART 2 MEMNAGAR MEMNAGAR AHMEDABAD GUJARAT 380052 | AHMADABAD | GUJARAT | 380052 | - | Rejected-Technical Audited balance sheet not submitted, CA turnover certificate not submitted and All ISO certificate not submitted | |
| 4 | Rejected-Technical | - | Rejected-Technical Audited balance sheet not submitted, CA turnover certificate not submitted and All ISO certificate not submitted. | |
| 5 | Rejected-Technical BUNGALOW NO 9 MAGARPATTA CITY HADAPSAR PUNE MAHARASHTRA 411028 | PUNE | MAHARASHTRA | 411028 | - | Rejected-Technical Audited balance sheet not submitted, CA turnover certificate not submitted and All ISO certificate not submitted. |
| Sl No | Description | Qty | Unit | STEM SHIKSHAK SOLUTIONS PRIVATE LIMITED | TECHBOTZ SOLUTIONS |
|---|---|---|---|---|---|
| 1.00 | Arduino UNO Atmega 328P-8Bit AVR family Microcontroller
Only DIP Controller is Required | 1 | Nos | 838 ₹988.84 | 831 ₹980.58 Lowest |
| 2.00 | Arduino nano (soldered) Atmega 328P-8Bit AVR family Microcontroller
Pins must be soldered | 1 | Nos | 470 ₹554.6 | 433 ₹510.94 Lowest |
| 3.00 | Breadboards Solderless 400 points | 1 | Nos | 76 ₹89.68 | 65 ₹76.7 Lowest |
| 4.00 | Mini Breadboard Solderless 800 Points | 1 | Nos | 93 ₹109.74 | 80 ₹94.4 Lowest |
| 5.00 | Self Adheisive Bradboard Self Adhesive Proto shield | 1 | Nos | 260 ₹306.8 | 233 ₹274.94 Lowest |
| 6.00 | General purpose Soldering Board FR2 A Grade Material (140*90mm) | 1 | Nos | 32 ₹37.76 | 30 ₹35.4 Lowest |
| 7.00 | General purpose Soldering Board FR2 A Grade Material (80*55mm) | 1 | Nos | 21 ₹24.78 Lowest | 25 ₹29.5 |
| 8.00 | General purpose Soldering Board Female Berg Strip 40 Pins Single Row | 1 | Nos | 13 ₹15.34 Lowest | 13 ₹15.34 Lowest |
| 9.00 | General purpose Soldering Board Male Berg Strip 40 Pins Single Row | 1 | Nos | 13 ₹15.34 Lowest | 13 ₹15.34 Lowest |
| 10.00 | 16x2 LDC display with Fixed I2C Dot matrix LCD display with 16 characters x 2 lines | 1 | Nos | 385 ₹454.3 | 381 ₹449.58 Lowest |
Tender Value
Refer Docs
EMD Value
₹50,000
Closing Date
21 Oct 2025, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
DEO Latehar
District Collector Office 2nd floor
Request for Proposal RFP for Installation, Commissioning and Maintenance of ARTIFICIAL INTELLEGANCE Labs in selected govt. schools of Latehar
2025_DMFTL_104458_3
714
Open Tender
Miscellaneous Goods
Item Rate
Latehar
Please refer Tender documents.
4 documents required · 4 mandatory
₹5,000
Yes
₹50,000
Yes
5 Jan 2026
11 Oct 2025
24 Oct 2025
11 Oct 2025
21 Oct 2025
11 Oct 2025
Arduino UNO Atmega 328P-8Bit AVR family Microcontroller Only DIP Controller is Required
Arduino nano (soldered) Atmega 328P-8Bit AVR family Microcontroller Pins must be soldered
Breadboards Solderless 400 points
Mini Breadboard Solderless 800 Points
Self Adheisive Bradboard Self Adhesive Proto shield
General purpose Soldering Board FR2 A Grade Material (140*90mm)
General purpose Soldering Board FR2 A Grade Material (80*55mm)
General purpose Soldering Board Female Berg Strip 40 Pins Single Row
General purpose Soldering Board Male Berg Strip 40 Pins Single Row
16x2 LDC display with Fixed I2C Dot matrix LCD display with 16 characters x 2 lines
USB Cable Set USB Cable Set (AtoB)
USB Cable Set Mini USB Cable Set
9-12V Rechargable Battery 9V-12V Rechargable battery Rechargable Battery charger--2x
Resister Kit Resistor Kit (Different Value)
Capacitor Kit Capacitor Kit (Different value)
Line Voltage Regulator 7805
Line Voltage Regulator 7812
Line Voltage Regulator 7809
Water Pump Module DC 12V,4W,Submersible water Pump with
Piezoelectric Plate Normal copper based 4cm Diameter
8*8 LED Matrix Module Max 7219 Dot LED Matrix Module MCU control LED Display Module
Bluetooth HC 05 working voltage 5 Volt
7 Segment LED Display LED 4-digit Display Module w/t clock point /4 pin DuPont line for Arduino.
Laser Diode 650Nm, 6mm, 5V DC, 5mw mini Laser dot diode module
LDR Module Photosensitive LDR light sensor module
Keypad Universal 16 Key switch keypad
Joy Stick Joy stick module for Arduino
Active Buzzer Small 5 Volt
Active Buzzer Big 5 Volt
Motor Driver L293D Moter Driver module
Sound Play Back Module ISD 1820VOice Recording Module or equivalent
DC Plastic Gear motor with thick wheel 12V,150 RPM,Side shaft,Battery operated
NodeMCU ESP 8266 I2C,1 Wire,Plug and Play
Wemos D1 R2 WeMos D1 R2 with Wi-Fi,ESP 8266
Vibrating Motor Vibrating Motor Opertating Voltage 1.5 to 3V
Alligator Connectors Multi Colour Alligator Connectors
Battery clips with DC Jack 9 volt battery clips with DC Jack
Hook-up Wires Red & Black set 100 Meters each
Jumper Cable Male - Male
Jumper Cable Male-Female
Jumper Cable Female -Female
RGB LEDs Regular 5mm 3-5 volt Range
LEDs (Red) Regular 5mm 3-5 volt Range
LEDs (Green) Regular 5mm 3-5 volt Range
LEDs (Blue) Regular 5mm 3-5 volt Range
LeD(yellow) Regular 5mm 3-5 volt Range
LEDs (White) Regular 5mm 3-5 volt Range
555 Timer IC 555 Timer IC 4.5V to 16 Volt
Diode Kit 1N 4006
Diode Kit Zener Diode 4.6V
Zener diode 2.5V
Diode Kit 1N 4007
Transistor Kit BC 557
Transistor Kit BC-547
Slide Switch Micro
Push Button Switch
Toggle switch
IR Sensors Obstacle LM 393 Detectation Distance 2-30 C.M Detection angle 30-40 Degree
Humidity Sensor Operating range: 20 - 95 % RH Temperature: 0 - 60 Celsius Power supply: 1.5V AC (Max sine) Operating frequency: 500 -2KHZ
MQ Series MQ-2 Smoke detection
MQ Series MQ-3 Alcohol-Ethanol sensor
MQ Series MQ-4 Methane Natural Gas Sensor
MQ Series MQ-5 Methane Liquified Gas Sensor
MQ Series MQ-6 Liquified Petroleum Gas Sensor
MQ Series MQ-7 High Sensitivity CO Carbon Monoxide Sensor Detector
MQ Series MQ-8 Hydrogen Gas Sensor
MQ Series MQ-135 Air Quality Sensor (Smoke Fast response Stable and long life Simple drive circuit)
IR (transmitter) receiver TSOP 1738 Switching rate – 38 KHz
Ultrasonic Sensor Module HC-SR-04 or compatible Power supply Quiescent current Working current Effectual angle Ranging distance Resolution Working angle & dimension
PIR Motion Detector Module High digital pulse when motion detected Low digital pulse when idle /no motion detected Sensitivity range (upto 6 m) Power supply: 5V – 12V
Pulse Rate heart sensor Pulse Rate Sensor Finger Based wore on the finger or earlobe Working voltage 3-5V
Relay Module 5V 10A 2 Channel Relay Module
Relay Module 5V,10 A,-1 Channel Relay module
Soil Moisture Sensor FC-28with LM 293 Comparator Operating Voltage 3.3V to 5 Volt Module
Touch Sensor. (TP224) Capacitive Touch Sensor Module TTP 22X series Operating Voltage 2.4V to 5.5V
Metal touch sensor module KY-036 or Equivalent Metal Touch sensor Module
Rain Drop Sensor Rain Sensitive, Rain Drop Detection Sensor Module
Flex Sensor 2.2 Inches
Temperature Sensor Lm35
Temperature sensor and Humidity sensor Module DTH 11 Voltage range 3v-5V
Force Pressure Sensor Force sensitive resistor with a square, 1.75" x 1.5" sensing area
Colour Recognition Sensor TCS3200 Colour Recognition Sensor
Water Flow Sensor Arduino Compatible water flow sensor 5V Dc Input
IR Sensors Array for Line Following IR Sensors Array for Line Following
10000 mAH 5 volt Power Bank
RFID Reader – Tags Current: 13-26mA/ DC 3.3V Idle Current: 10-13mA/ DC 3.3V Sleep Current<80uA Peak Current<30mA Operating Frequency: 13.56MHz<30mA Read range between 20 cm to 1 m
RF Modules Tx & Rx 315 MHz ASK Frequency Range: 433.92/315 MHz Supply Voltage: 3 – 6 V Output Power : 4 – 16 Dbm Low power consumption Easy application
Stepper Motor with Driver board 28BY J-48 ULN2003 5V Stepper motor+ULN2003 Driver Board
DC Motor 12V, DC gear 150 RPM
Servo motors Position Servo Angle based Metal Gear
Servo motors Small Servo Metal Gear
Servo motors Continuous Metal Gear Servo 360
Servo motors Small Servo Plastic Gear
150 RPM BO Motor
L298P Motor Driver L298P Motor Driver shield or Relative driver shield
Robotics DIY KIT 4 wheel robotics kit 4 Motor,1 hard plastic 4wheel Chesis Set with outer cover for wheel,1X battery Pack,4X wheel,1x Motor Driver Module and 1X AIC Controller
Centrifugal Kit-Mechanical kit includes DIY Building parts like beam, gear, axel, bush, connector peg
Ferris Wheel Kit-Mechanical kit includes DIY Building parts like beam, gear, axel, bush, connector peg
Pull Back Car Kit- Mechanical kit includes DIY Building parts like beam, gear, axel, bush, connector peg
Sling Shot Kit- Mechanical kit includes DIY Building parts like beam, gear, axel, bush, connector peg
Forklift Kit- Mechanical kit includes DIY Building parts like beam, gear, axel, bush, connector peg
Revolver Kit-Mechanical kit includes DIY Building parts like beam, gear, axel, bush, connector peg
Try cycle Kit- Mechanical kit includes DIY Building parts like beam, gear, axel, bush, connector peg
Bird Balancing kit Mechanical Modular kit kit includes DIY Building parts like beam, gear, axel, bush, connector peg
DIY Drone kit
3D Printer Printer Type: FDM (Fused Deposition Modelling) Minimum Dimensions: 256mm*256mm*256mm build volume) Build Size 4PLA can put together and can printer simultaneous Nozzle: 0.3mm to 0.4mm.
Filament for 3D printer Compatible 700/1000 Grams Filament
600VA UPS Dedicated UPS for 3D Printer Backup
Big Hexa Frame 12" or More
Big Hexa Frame blade
Mini Hexa frame 6" frame
Hexa Frame Blade Mini hexa frame
Pliers External Straight
Pliers Nose Circlip Plier
Pliers Long Nose Plier
Pliers Combination Mini Plier
Pliers Wire stripping pliers
Pliers Bent nose plier
Pliers Needle nose pliers
Tweezer set 6 pic non magnatic tweezer set (6 Inches)
Ball Pein Hammer
Steel Shaft Claw Hammer Claw Hammer Steel shaft
Allen Key Set 9 piece ring Imperial allen hex Key
Drill Machine set Drill Machine set with Accessories Hammer/screw and clock wise and Anti clock wise 350Watt
Precision Screw Driver Set 6 Piece Precision Screw Driver Set
Wire Strippers
Screwdriver 40 Pc Multi-purposescrew driver
Cordless Rotatary Multitool Set Cordless Rotary Multitool with All Cutting,Grinding polishing,engraving and drill bits,Speed Adjustable upto 3000 rpm battery type:-Li-ionvoltage /Current 8-10V,0-2 Amp
Drill Bit Set High Quality 13 pcs, Hss Drill bits set for wood, iron, Aluminium, Plastic etc.
Flexible cutting Mat A3 size with Marked Pattern and Grids (18" x 12") (IN Stock)
Hot Glue Gun Range in open space (Standard Conditions) 230 to 280 Degree celsius
De-soldering Pump 4X
Soldering Flux (paste), 4X
De-soldering Copper Braid (solder wick), 4X
Soldering wire: 20/22AWG soldering wire with rosin core flux 100 grams) 4X
Soldering Kit Variable Wattage of Soldering Iron: 15-30 watts/ 230 volts Soldering Iron Temperature Range: 280°C to 450°C,
Adapters DC power Adapter with -12V 2Amp
Adapters 9v, 2 amp
Electric Screw Driver Set Electric screw Driver set includes battery, and Screw set
Dual temp heat Gun 1800 W Dual Temperature Heat Gun
Soldering helping hand Adjustable Crocodile Holding Clamps/Clip, Soldering Iron Holder,LED Magnifying lens
Return measuring tape 5Mx19mm
Stainless Steel 12”/ 150 mm Rule
Digital Vernier Calliper 150 mm / 6” Digital Vernier Calliper
Spirit Level 12” Spirit Level
Digital Pen electric Tester Voltage tester
6x4 feet alkon Alokn board Mounted on ply,size will be 6x4 feet,with connector Hook
Digital Multi Meter Digital Multi Meter Voltage Current Resistance-7 functions + 19 ranges to cover DC voltage 200mV to 1kV, AC voltage 200 V - 750 V, DC current 200 μA - 10 A, Resistance 200 -2 M Ohm and Transistor & diode test
Glue Stick 11mm x 200mm hot melt Glue stick
Nuts, Bolts, and Screw Spec M4x12MM, M4x20MM, M5x16MM, M5x25MM, M6x20MM
Cable tie. Small (pack of 100)
Cable tie. Medium (pack of 100)
Cable tie. Big (pack of 100)
Sand paper Various Grit-80
Sand paper Various Grit-100
Sand paper Various Grit- 120
Power Strips Adapters 5 Plug with safety fuse standard quality extension 3M wire
Bulb Holders Regular Hanging Bulb holder. 9x
Electric wires Twisted red black pair
USB to DC Jack for battery bank
Safety goggles (without LED torch) safety goggles for chemical splash and smoke from soldering
Safety Gloves Pairs Latex coating gloves (medium size)
Safety Mask Filtering efficiency ranging 80 percent when tested against 0.3 micron sodium chloride particle.
E-LT KIT
P-LT EKIT
Xtrem Kit
Computers Mini PC in one
Intractive panel
Gears Cutout Acrlylic Differet colour 10"
Bulb design branding 4x2 feet, cutout
Acrylic Board 3x1.5 feet
Sinages on sunboard 2x1 Feet
I AM Innovator Acrylic 8x1.5
Acrylic humaniod robot 4x3 feet
Acrylic art work 10"x10" art work
Sunboard 4x2 feet
Work Table Metal (frame and legs) Ply Pre-laminated top4x2.5 feet,Square in Rectangle shape
Work Table for 3D printer Made up with 18MM Ply 5x3 feet with Storage Cupboard, and Rack on Top,Mounted with metallic stand
Soldering station with utility shelf Metal (frame and legs) ply Pre-laminated top 6x4 Feet, with Softboard and tuplight stand on top
Stools Matallic with cushion standard height
Almirah Made up with Ply with Lock 6x3 feet
Computer table MDF pre laminated 3x2 feet with Power supply board
Tool Board Mounted on ply 6x4 tool Board for Hanging tools
Game Table 8x4 Feet Made up with ply and metsallic stand with 80MM Boundry
White wash & Putty 600 Sq feet 2 colour on wall
HR for lab
stage.html
html • 0.06 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.43 MB
RFPAIlab.pdf
Tender Documents • 9.33 MB
BOQ_142364.xls
BOQ • 0.42 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .