Augmentation to water supply scheme at Samarvarni

Amount

Providing and supplying D. I. K-9 grade pipes for following nominal bore diameter with internal cement mortar lining including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to departmental stores, stacking etc. complete. (IS 8329-2000). Rate for DI pipe based on wholesale price index of pig iron as 157.60 for the month of Dec-2022. (For Rising main & Distribution Pipeline) (MAKE BY: JINDAL, ELECTROTHERM, TATA METALICS) 100 mm dia DI-K9

150 mm dia DI-K9

200 mm dia DI-K9

300 mm dia DI-K9

350 mm dia DI-K9

400 mm dia DI-K9

Manufacture, Supply & Delivery of Ductile Iron Flange socket spigot bends, tees, reducers or any other specials as per BS-EN-545/1995 Class-A series K12 suitable for use with D.I. Pipes manufactured as per IS:8329/1994delivery of specials is to be made to departmental store or site of works any where in Silvassa including all taxes, loading, unloading, carting, stacking, insurance, inspection charges, octroi etc. complete. (For Rising main & Distribution Pipeline) (MAKE BY: JINDAL, ELECTROTHERM, TATA METALICS) Socket and spigot DI spacials 80 to 300 mm dia

Socket and spigot DI spacials 350 & above

Flanged ended DI Specials 80 to 300 mm dia

Flanged ended DI Specials 350 & above

Providing and supplying in standard length ISI mark rigid unplasticised PVC pipes suitable for potable water with ring fit joint including cost of rings, as per IS specification no. 4985/1988 including all local and central taxes, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to the departmental stores and including cost of jointig material etc. complete. (For UGSR & Toilet Block) (MAKE BY: FINOLEX, PRINCE, MAYFAIR) Test Pressure 6 Kg/Cm2 90 mm Dia

110 mm Dia.

Providing and supplying ISI standard R.C.C pipes (of sulphate resisting cement) in standard length of following class and diameter suitable for either collar joints or rubber ring joints including all taxes. Insurance, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to department stores, stacking etc. Note: One collar should be supplied with each full length plain ended RCC pipe, cost included in rates. one rubber ring should be supplied with each full length socketed pipe, cost included in rate. (For UGSR & Distribution Pipeline) (R.C.C PIPE Conform to I.S. 458-1989 : INDIAN HUME PIPE CO., ALCOCK PRODUCT) Class NP3 Test Pressure 0.7 kg/sq.cm 900 mm dia (For future expansion)

1200 mm dia (Overflow pipe for UGSR (from chamber to natural drain)

Providing & supplying ISI mark C.I.D/F sluice valves, as per IS 14846 (latest edition) of following class and diameter including all taxes, insurance, transportation, frieght charges, octroi, inspection charges, loading, unloading, conveyance to departmental stores, stacking etc. complete. (For Rising main, ESR & Distribution Pipeline) (MAKE BY: KILOSKAR, IVC, FOURESS, SVR, R&D) PN 1.0 with hand /wheel cap opertaed (PD type Short Body) 80 mm dia

PN 1.0 with hand /wheel cap opertaed (Alt-1 type long Body) Sluice Valve - 100 mm Dia.

Sluice Valve - 150 mm Dia.

Sluice Valve - 200 mm Dia.

Sluice Valve - 250 mm dia.

Sluice Valve - 350 mm dia

Sluice Valve - 400 mm dia.

Providing and supplying C.I Temper proof Air-valves with S. S with 304 float gun metal- nozzle of approved make and quality of following class and diameter including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to departmental stores, stacking etc. complete. (For Rising main) (MAKE BY: KILOSKAR, IVC & HAWA ENG. LTD.) Without Isolating Sluice Valve PN 1.0 80 mm dia

Erection of air valve riser by installing new MS pipe of 6 mm thick 3.2 mt length with necessary fitting such as flange of appropriate size, nut bolts and embedded the pipe in R.C.C M 15 with offset of 100 mm around pipe with necessary steel etc. complete. (For Rising main) (MAKE BY: JINDAL, WELSPUN PSL, ESSAR STEEL, SAIL, RATNAMANI) Dia of Air valve 80 mm & MS pipe

M.S. specials flanged ends Above 300 mm dia. (For Rising main)

Gas Cutting (Either square cut or V cut) pipes, plates etc including all costs for the following thickness Above 5 mm upto 10 mm (For Rising main)

Welding in all positions with required number runs, for MS pipes internally and/or externally including gauging wherever necessary, fixing appurtenances and other accessories in connection with pipe laying work as per specification As above for Butt Joints : Plate thickness Welding for pipe thickness above 7 mm (For Rising main)

Excavation for pipe line trenches for water supply, sewerage line, manhole etc. all with shoring and struting if required as per required gradient and line including safety provisions using site rails and stacking excavated stuff including up to all required lead cleaning the site etc. complete for all lifts and strata as specified. (For Rising main, Distribution Pipeline & CC Road) Upto 1.50 Mt depth a) In all sorts of soil and soft murrum

b) In hard murrum, boulders incl. macadam road.

c) In Soft Rock and/or masonry in CM or L M or Lime Concrete.

d) In hard Rock and/or in C.C. 1:2:4 or RCC with blasting, breaking, chiseling, or by chiseling/breaking only.

From 1.50 Mt. to 3.00 Mt depth d) In hard Rock and/or in C.C. 1:2:4 or RCC with blasting, breaking, chiseling, or by chiseling/breaking only.

Excavation in bituminous road as per required gradient and line including safety provisions using site rails and stacking excavated stuff including up to all required Lead cleaning the site etc. complete for all lifts as specified. (For Rising main) a) Excavation in Bituminous Road

Providing, supplying, gas cutting, weldding & jointing of proposed 355.6 mm dia. & 5.6 mm thick M.S. pipe with existing 914 mm dia. & 8 mm thick M.S. pipe including excavation, dewatering, pipe laying work as per specification, refilling of excavated stuff etc. complete. within allocated time of 24 hrs. (Note : work is to be completed in 24 hrs. time period. If )work is delayed and w/s is interrupted agency will have to make his own arrangement at his own cost to supply water to all pipes through tanker.)

Providing Bedding incl. ramming, watering, levelling, consolidating etc. complete as per standard and instruction of engineer incharge As above with required quality sand brougth from outside including all lead (For Rising main & Distribution Pipeline)

Lowering, laying and jointing D.I. S & S Spun pipes suitable for Tyton joints / Mortar lined D. I. Pipes of various classes with CI / MS specials of following diameters in proper position, grade and alignment as directed by Engineer-in-charge including hydraulic testing etc. comp. (For Rising main & Distribution Pipeline) 100 mm dia DI-K9

150 mm dia DI-K9

200 mm dia DI-K9

300 mm dia DI-K9

350 mm dia DI -K9

400 mm dia DI-K9

Lowering, laying, fixing and jointing PVC/uPVC/cPVC pipes and Specials for dia- 6kg/cm2 including cost of conveyence from stores to site of work including cost of labour, material, cement solvent, giving satisfactory hydraulic testing as per IS code. (For UGSR, Pump house & Toilet Block) 90 mm Dia

Lowering, laying and jointing R.C.C pipes in C.M. 1:1 1/2 of following diameter in proper position, grade and alignment at all level as directed by Engineer in charge including conveyance from stores to site of work, labour, giving hydraulic testing as per ISI code. (for utility transmission in future development plans) Class NP3 900 mm dia

1200 mm dia

Lowering, laying and jointing in position following C.I. / D/F Reflux valves, Butterfly valves, Sluice valves and Air valves including cost of all labour, jointing materials, including nut , bolts and giving satisfactory hydraulic testing etc. complete. (For Rising main & Distribution Pipeline) Sluice valves, Butterfly valves, Reflux Valves Sluice Valve - 80 mm dia

Sluice Valve - 100 mm Dia.

Sluice Valve - 150 mm Dia.

Sluice Valve - 200 mm Dia.

Sluice Valve - 250 mm Dia.

Sluice Valve - 350 mm dia

Sluice Valve - 400 mm dia

Air Valves double ball Flanged 80 mm dia

Construction of valve chamber in brick locally available in CM 1:6 Foundation concrete 150 mm thick in CC 1:4:8 of trap metal size 25mm to 40 mm thick, inside cement plaster in C.M 1:3 &cement pointing out side in C.M 1:3 and top cover or precast RCC slab 100 mm thick (with key hole in two patrs, each with handles or MS Bar etc.comp. as given size) Up to 1 Mt depth from GL to pipe invert level including complete civil works but excl. cost of excavation & refilling. With cast in situ RCC slab in one single piece with of C.I.M.H Frame & cover. (excl. cost of CI-MH Frame & cover) with 23 mm thick brick masonary wall in C.M.1 : 6 (For Rising main, UGSR, ESR & Distribution Pipeline) 1.with precast slab in two parts 15 mm (a) Size of 1.30 m x 1.30 m and 1.0 m deep

(c) Size of Chamber 0.90 m x 0.90 m and 1.0 mt. deep

(d) Size of Chamber 0.60 m x 0.60 m and 1.0 mt. deep

Providing and constructing sewer manhole, scraper manhole and unit house connection chamber, as per the type design in brick masnory in C.M. 1.:5 and inside and outside 20 mm thick plastering in C.M. 1:3 necessary 100 mm coping with reainforcement in R.C.C. M200 fixing C.I. steps and fixing manhole frame and covers (but excluding supply of manhole frame and covers) over manhole and house connection chamber and fixing manhole covers (but excluding supplying of manhole covers) over scraper manhole etc. complete. providing and fixing safety chain wherever necessary as per the stipulations in the type design complete as per latest CPHEEO manual. (excl. excavation). (b) Manhole type "B" circular type having inside diameter of minimum 1500 mm and for depth from 1.5 m to 4.0 m (for 150 mm to 600 mm dia. Sewers) Manhole type "B" as above but upto 1.5 m depth.

Extra depth beyond 1.5 M but upto 4.0 M depth for type "B" manhole above.

Refilling the pipeline trenches including ramming, watering, consolidating desposal of surplus stuff as directed within a radius of 3 km 1. Refilling as directed (For Rising main & Distribution Pipeline)

Dismentaling the existing structure including removing and stacking the dismentelled materials as and where directed. (A) R.C.C Work (For Rising main)

Restoration of Road by WMM Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam (WMM) in two layer as per specification and drawing including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per MORT&H fifth revision clause- 406. (For Rising main & Distribution Pipeline) As per Rate Analysis

Excavation for foundation including all safety provisions using site rails and stacking excavated stuff up to a lead of 90 mts. cleaning the site etc. complete for lifts and strata as specified. (For UGSR, ESR & Toilet Block) Upto 1.5 m. depth (I) In all sorts of soil and soft murrum

1.5 m to 3.0 m. depth (II) In hard murrum

3.0 m to 4.5 m. depth (III) In Soft rock

4.5 m to 6.0 m. depth (III) In Soft rock

Providing and casting in situ mass cement concrete in grade M-10 (Approx corresp to prop 1:3:6) using granite quartizite trap metal of size 12 mm to 25 mm including consolidation, curing etc complete. (For CC Road) With Form work

Providing and casting in situ C.C. in grade M-15 (porportions as per mixdesign or as per Table 9 of IS456 2000 in masses by weigh batching ) using granite, quartzite trap metal of size 6 mm to 20 mm for RCC work, including scaffolding centering, form work, needle vibrated consolidation, curing comp. up to 6 meter depth or height (excluding cost of reinforcement and neat finishing) with centering and shuttering etc. comp. for structure for other than water retaining. Footing for column or foundation (with form work) 2. Footing for column or foundation (with form work) (For Thust Block, UGSR, ESR, Distribution Pipeline & Toilet Block)

Providing and cast in situ C.C. in grade M-25 proportions of ingredients as per mix design by weigh batching using granite, quartzite trap metal of size 12 mm to 20 mm and or 6 mm to 20 mm including scaffolding formwork, needle vibrated consolidation, curing and hydraulic testing etc. complete (excluding cost of reinforcement) with centering and shuttering/deshuttering etc. comp. up to 6 meter height or depth from average G.L. for all water retaining structures. (For Toilet Block) COLUMNS

BEAMS

Footing

Providing and cast in situ C.C. in grade M-30 proportions of ingredients as per mix design by weigh batching using granite, quartzite trap metal of size 12 mm to 20 mm and or 6 mm to 20 mm including scaffolding formwork, needle vibrated consolidation, curing and hydraulic testing etc. complete (excluding cost of reinforcement) with centering and shuttering/deshuttering etc. comp. up to required height or depth from average G.L. for all water retaining structures. (For UGSR, ESR & CC Road) Flat bottom Slab with shuttering (RAFT)

For vertical wall

Flat Top slab/ floor slab with shuttering

R.C.C. Column

RCC chhaja

Column Footing

Extra for raising / lowering of C.C. for every additional 3 meter of part thereof in all RCC items of reservoirs or water retaining structures. (For ESR) 6 to 9 Mt. ht.

9 to 12 Mt. ht.

12 to 15 Mt. ht. .

15 to 18 Mt. ht. .

18 to 21 Mt. ht.

21 to 24 Mt. ht.

24 to 27 Mt. ht.

27 to 30 Mt. ht.

Supplying, cutting,bending, binding and placing in position steel as per plan and design and as per ISS 2502 including cost of steel and binding wire for reservoir /structures only including lift up to 6 mt. height or depth below G.L. for all diameters. Do- CRS steel all diameter Fe 500 garde confirming to relevant I.S (For UGSR, ESR , Toilet Block & CC Road) (MAKE BY: TATA STEEL, RINL,ESSAR(PRIMARY STEEL), ELECTROTHERM)

Extra for raising steel bars for every additional height of 3 meters or part thereof. (For ESR) 6 to 9 Mt. ht.

9 to 12 Mt. ht.

12 to 15 Mt. ht.

15 to 18 Mt. ht.

18 to 21 Mt. ht.

21 to 24 Mt. ht.

24 to 27 Mt. ht.

27 to 30Mt. ht.

Providing pressure grouting at 5.6 kg. / sq.cm in required row / zigzag fashion as specified at 1.5 M intervals as per site conditions to stop leakages from water retaining structures including supply of cement and hardening chemical, bringing equipments like compressor and all scaffolding works to get smooth fininshing as directed by engineer in charge. (For UGSR & ESR)

Providing and fixing water tight construction joint. 150 mm wide thin ribbed PVC. (For UGSR & ESR)

Cement Plaster (20 mm thick) (A) Cement plaster 20 mm thick in C.M. 1:2 using water proofinh compound of approved quality including finishing etc. complete. (For UGSR, ESR & Neutralization Pit) (CEMENT MAKE BY: ULTRATECH, AMBUJA)

Providing 15 mm thick cement plaster in single coat on Rough (similar)side of single or half brick walls for interior plastering upto floor two level and finished even and smooth in(i)cement mortar 1:3(1-cement : 3-sand) (For UGSR & Toilet Block)

20 mm thick sand faced cement plaster on wall upto height 10 meters above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-Cement : 3-Sand) & 8mm thick finishing coat of C.M. 1:1 (1-Cement : 1-Sand) etc. complete. (For UGSR, Chlorination Room, Security Cabin, Toilet Block & Compound Wall)

Providing and laying broken china mosaic flooring for terrace using 12mm to 20 mm broken piece of glazed tiles to be laid over cement mortar 1:3 to plain or slope and to be tempered to bring mortar creme out up to surface using white cement & using water proofing chemical of 1 kg per bag of cement including rounding off junctions and extending them up to 15 cm along the wall, clearing with water and oxalic acid etc.as directed by engineer in charge. (For UGSR)

Providing and fixing 35 mm thick shutters, for doors, windows and clear storey windows including anodized alluminium butt hinges with necessary screws. (A) Indian Teak Wood (1) Fully Panelled (For Security Cabin)

Providing and fixing M.S. Grills of required pattern to wooden frames of windows etc. with MS flats at required spacing and frame around square or round bars with round headed bolts and nuts or by screw (A) plain grill (For UGSR, ESR & Security Cabin) (MAKE BY: TATA STEEL, SAIL, JINDAL STEEL)

Providing and fixing standared extruded of alluminium section of size 63mm x 38.10mm x 1.2mm (Jindal Section :2434, @ Wt. 0.643 Kg/mt) with colour anodized alluminium frame for ventilation with 5 mm thick frosted glass as details etc complete for Ventilation (Anodized from factory) (For UGSR & Toilet Block)

Providing fabricating and fixing / installing C.I. gates of size as per enclosed drawings with operating handle etc. for by pass arrangement With ISI Mark (For UGSR) C.I. gate (450*300)[100kg/nos, 2nos:- 2*100=200kg)

C.I. gate (750*600)[200kg/nos, 2nos:- 2*200=400kg)

Providing and fixing extruded aluminium window having extruded aluminium colour powder coated section frame main outer size 127 mm x 38.10 mm x 1.35 mm (of Jindal section no 2443,@ wt. 1.384 kg/mt.),horizontal four track member size 122.20 mm x 31.75 mm x 1.10 mm (of Jindal section no.8787,@wt.1.205 kg/mt.), vertical member of size 122.20 mm x 31.75mm x 1.50 mm (of Jindal section no:8935,@wt.1.398 kg/mt.)with sliding shutter of horizontal member size 40 mm x 18 mm x 1.29 mm (od=f Jindal section no:8949 @wt. of 0.456 kg/mt.).vertical member of size 40 mm x 18 mm x 1.29 mm(of Jindal section no:8947 @wt. of 0.456kg/mt./section 8948,@wt.0.457 kg/mt.) with 5 mm thick transparent bronze colour tinted float glass with powder coated aluminium fitting and fixtures and transparent silicon sealant glass fixing to frame as per details etc. complete for window. (factory made) (aluminium alloy confirming to IS : 733 & section confirming : 1948) (powder coating from factory) (For UGSR) (MAKE BY: JINDAL)

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undercoated wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth. (For UGSR & Toilet Block) (MAKE BY: ASIAN PAINTS, DULUX, BERGER PAINTS, NERO LAC)

Finishing wall with water proofing cement paint of on wall surface (two coats) to given an approved brand and manufacture and of required shape even shade after thoroughly brushing the surface to remove all dirt and remians of loose powered materials. Including Extra over iten 51 for every subsequent coat of water proofing cement paint of approved brand and manufacture. (For Security Cabin)

Applying priming coat over new steel and other metel surface after and including preparing the surface by throughtly cleaning, oil, grease, dirt and other foreign matter and scoured with brushes fine steel wood, scraper and sand paper wirh ready mixced priming paint brushing red lead (confirming : 2074, 1992 or its latest revision) (For UGSR) (MAKE BY: ASIAN PAINTS, BERGER PAINTS, NERO LAC)

Painting two coats (excluding priming coat) on new steel and other metal surface with synthetic enamal paint, brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. (For UGSR) (MAKE BY: ASIAN PAINTS, BERGER PAINTS, NERO LAC)

Painting letters with enamelled paint for "Capacity of tank" the size of letters will be 45 cm height and 50 mm width etc.complete as directed. (For UGSR & ESR)

Purchasing & supplying at site of works, with Railway freight, loading, unloading, carting, etc. complete such as joints, channels, angles, iron rails as directed including paints 2 coats etc. complete. 1. Angles & channels below 10 mm thickness (For UGSR) (MAKE BY: TATA STEEL, SAIL, JINDAL)

Labour charges for lowering, laying, erecting. Fixing, various size of M.S. section such as joints channel, angles, plates etc. complete. 2. do with fabrication (For UGSR)

Providing and fixing 50 cm wide M.S. ladder fabricated from M.S. flats 10 mm x 75 mm with 20 mm dia steel bar steps in double rows, @ 30 cm c/c. The include stays of 10 mm x 50 mm flats fixed at 3 meter c/c with velding anchoring and 3 coats anticorrosive paint. (For UGSR & ESR) (MS FLATS MAKE BY: TATA STEEL, SAIL, JINDAL STEEL) (ANTICORROSIVE PAINT MAKE BY : ASIAN PAINTS, DULUX) (WELDING ELECTRODS: ADOR, BLUE MANTIS, D&H) (a) M.S. Ladder (without Safety cage)

(b) Note: For M.S. Ladder (With Safety cage)

Providing and applying Epoxy paint of approved make to concrete surface for RCC ESR or GSR or any other structure including cleaning the surface by scrapping and air blower to the satisfaction of Engineer-in-charge necessary scaffolding etc. complete with all leads and lifts and giving satisfactory hydraulic test for water tightness as per IS Codes confirming : 14209 (1994) (For ESR) (MAKE BY: ASIAN PAINTS, GLOBAL PAINTS, BERGER PAINTS) 1) For New surface - Two coats

Providing 150 mm Dia. C.I. Cowl type ventilator with air filter & Jali etc. complete (weight 25 kg. approx per nos.) 8nos. (8*25kg =200 kg) (For ESR)

Fixing 150 mm Dia. CI cowl type ventilator in C.C. 1:2:4 with bolts and nuts etc. complete including cost of jointing material (For ESR)

Providing C.I. Manhole frame & cover of size 600 mm x 900 mm (weight 75 kg. approx per nos.) 8nos. (2*75kg =150 kg) (For ESR)

Fixing all types of C.I. frame & cover in C.C 1:2:4 including carting etc. complete excluding cost of R.C.C (For ESR) (CEMENT MAKE BY:ULTRATECH, AMBUJA)

Providing and fixing flanged steel cylinder reinforced concrete or C.I.D.F. / Class A pipes vertically for R.C.C. Reservoir incl. providing clamps at every 3 mt incl. jointing materials such as nuts, bolts, rubber packing, hydraulic testing and necessary scaffolding etc. complete. (For ESR) (MAKE BY: ELECTROSTEEL, ELECTROTHERM) 300 mm dia. Inlet pipe

400 mm dia. Outlet pipe

400 mm dia. Over flow

250 mm dia. Washout pipe

Manufacture, supply and delivery of 80 mm to 700 mm dia cast iron flange ended specials complete as per IS: 5531-1977 (Part I to III) or its latest revision if any, suitable for use with A.C. Pressure pipes manufactured as per IS: 1592-1989 or its latest revision for various dia meter and classes. The delivery of specials is to be made to GWSSB store or sites any where in Gujarat States including all taxes, loading, carting, unloading, stacking, insurance, ociroi, inspection charges etc. complete. (For ESR)

400 mm dia. Inlet pipe

400 mm dia. Outlet pipe

500 mm dia. Overflow pipe

Water Level Indicator Providing and fixing water level indicator or depth gauge painted on TW plank 25 mm / MS plate of 4 mm thick float, level indicator sliding wire on standard pulleys including necessary arrangement to prevent the swinging etc. complete with calibration up to 5 mt. height. (For ESR)

Providing and fixing copper lightning arrestor incl. copper strip and earthing plate etc. complete (incl. cost of excavation for earthing plate etc. rate per kgs of copper) (For ESR)

Providing an fixing 25 mm x 5.2 MS railing with three horizontal rows and posts of angle iron of size 65 mm x 65 mm x 8 mm. or 150 mm Dia RCC post and 1.15 meter height and placed at 1.85 mt / c/c including painting. Two coats and anchorage in CC etc complete As Directed by Engineer in Charge (For ESR) (CEMENT MAKE BY: ULTRATECH, AMBUJA)

Disposal off surplus excavated stuff up to lead of 5Km. (For UGSR, ESR & Toilet Block)

Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse sand : 6- crushed stone aggregates 40 nominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth (For Chlorination Room, Neutralization Pit, Security Cabin & Compound Wall)

Providing and laying controlled cement concrete M-20 exposed work with curing etc. complete including the cost of formwork but excluding the cost of reinforcement for R.C.C work in (A) BEAMS: (i) Having croos-sectional area 0.05 to 0.08 sq.M. (For Compound Wall) (CEMENT MAKE BY: ULTRATECH, ACC & HATHI) Footing

Ground Beam with Formwork

Coping with Formwork

Column with Formwork

Providing and laying controlled cement concrete M.25 and curing complete excluding the cost of formwork and reinforcement for reinforced concrete work in (A) Foundation, footings, Base of columns and Mass concrete. Footing (For Chlorination Room)

(C) Slabs, Landing, Shelves, Balconies, Lintels, Beams, Girders and Cantilever upto floor two level. Slab

(D) Columns, Pillars Posts and struts, upto floor two level. Columns

Brick work using common burnt clay building brick having crushing strength not less than 35 kg/sq.cm in foundation and plinth in Cement Mortar 1:6 (1-Cement : 6-Fine sand) (B)Conventional Including Extra for brick in superstructure above plinth level up to floor two level (B) Conventional (For UGSR, ESR, Chlorination Room, Neutralization Pit, Security Cabin, Toilet Block & Compound Wall)

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful material and disposing off the excavated stuff upto 50 M lead. (For Chlorination Room, Neutralization Pit, Security Cabin & Compound Wall) Upto 1.5 m. depth (A) Loose or soft soil

(C) Hard Murrum

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of useful material and disposing off the excavated stuff upto 50 M lead. (For Chlorination Room & Neutralization Pit) 1.50 m to 3.00 m depth (C) Hard Murrum

Trunniors (For Chlorination Room)

Refilling of chlorine Gas cylinder: Refilling of chlorine Gas cylinder including transportation to and from factory and back (a) Chlorine cylinder 900 kg (For Chlorination Room)

Transportation of chlorine gas cylinder with loading, unloading, cylinder transportation from site of work to refilling factory and back etc complete. (For Chlorination Room)

Supply of chlorine cylinders Providing and supplying chlorine gas cylinder empty of required capacity with necessary explosive certificates including all taxes (A) chlorine cylinders 900 kg (tonner) (For Chlorination Room)

Providing, supplying and installing Vaccum control direct wall mounted gas chlorinator including necessary fittings, installation and commissioning of plant incl. clamp, copper pipe, ferule filter and control valve with injector. (For Chlorination Room) (CHLORINATOR MAKE BY: BIMCO, AQUA FLOW, VEDH TOSHNIWAL) VACCUME GAUGE 5 Kg Capacity

Providing & supplying digital chlorine detector monitor meter-0 to 20 ppm capacity (For Chlorination Room) (MAKE BY: SHREETECH, TOSHNIWAL, PARSHVI TECHNOLOGY)

Providing and supplying safety kit against use of chlorine. (For Chlorination Room)

Providing & supplying air breathing apparatus as per IS:10245 Part=II With 45 minutes duration cylinder (For Chlorination Room) (MAKE BY: SURE SAFETY, PROACTIVE, VSV SAFETY PRODUCTS)

Prividing NaOH resistant HDPE/PVC based liner inside the tanks or application of speciality chemical to make it alkalinity resistant (For Neutralization Pit)

Providing and fixing S.S. Grills of required pattern to wooden frames of windows etc. with SS flats at required spacing and frame around square or round bars with round headed bolts and nuts or by screw (A) plain grill (For Neutralization Pit)

Supplying 50% concentration NaOH Solution in required packing at site of work including all taxes etc complete. (For Neutralization Pit)

Providing & laying controlled cement concrete M250 and curing complete including the cost of formwork but excluding the cost of reinforcement for reinforced concrete work up to floor two level. (For Security Cabin) (A) COLUMNS

(B) BEAMS

(C) CHHAJJA

(D) SLAB

Providing & laying controlled cement concrete M250 and curing complete including the cost of formwork but excluding the cost of reinforcement for reinforced concrete work in foundations, footings, base of columns and mass concrete. (For Security Cabin)

Providing TMT Bar FE - 500D Reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level. (For Security Cabin & Compound Wall)

Extra for addittional lift of reinforcing steel for all R.C.C work above floor two level. (For Security Cabin)

Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in layer not exceeding 20 cm. in depth consolidating each desposalite layer by ramming and watering. (For Security Cabin)

Providing 10mm thick cement plaster in single coat on brick / concrete walls for interior plastering upto floor two level and finished even and smooth in (i) Cement mortar 1:3 (1 cement: 3 sand) (For Security Cabin)

Providing throating or plaster drip and moulding to RCC Chhajja (For Security Cabin)

Providing and laying polished kota stone slab flooring over 20 mm (Average) thick base of cement mortar 1:6 (1 cement: 6 coarse sand) or L.M. 1.1.5(1-Lime putty :1.5-coarse sand sand) laid over and joined with grey cement slurry mixed with pigment to match the shade of slab including rubbing ]and polishing etc. complete. (A) 25 mm thick (For UGSR & Security Cabin)

Providing and fixing window having extruded aluminium colour anodized section frame main outer size 95 mm x 24 mm x 1.17 mm @wt. of 0.738 kg/mt, horizontal three track member size 92 mm x 31.75 mm x 1.30 mm @wt.1.01 kg/mt, vertical member of size 92 mm x 31.75 mm x 1.50 mm @wt. 1.06 kg/mt, with sliding shutter of horizontal member size 40 mm x 18 mm x 1.29 mm @wt.of 0.456 kg/mt, vertical member of size 40 mm x 18 mm x 1.29 mm @wt. of 0.456 kg/mt, with 5 mm thick transparent bronze colour tinted float glass with powder coated aluminium fitting and fixtures and transparent silicon sealant glass fixing to frame as per details etc. (For Security Cabin)

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on wall surface to give an even shade, over and and including a priming coat of alkali resistance primer of approved brand after thoroughly brushing the surface and other foreign matter and also including preparing the surface even and sand parpered smooth. (For Security Cabin) (MAKE BY: ASIAN PAINTS, BERGER PAINTS, NEROLAC PAINTS, INDIGO PAINTS)

Providing and fixing 35 mm thick shutter for Doors, windows and clerestory windows including Indian teak wood frames 10 cm x 7 cm. size including black enamelled iron oxidixed fixtures and fastening including primer coat of approved quality and two coats of oil painting etc complete. II) fully panelled (For UGSR)

Providing and laying vitrified tiles 8 to 10 mm thick , 24'' x 24'' in flooring treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush pointing in white cement. (more than 10 ton) (For Toilet Block)

Providing and laying white glazed tiles 6mm thick in flooring treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush pointing in white cement. (more than 10 ton) (For Toilet Block)

Providing and fixing 30mm thick FACTORY MADE SOLID SINGLE SIDE PRELAM PANEL PVC DOOR SHUTTER consisting of frame made out of M.S. tubes of 19 gauge thckness and size of 19mm x 19mm for stiles, and 15mm x 15mm for top and bottom rails. The M.s. frame shall have coat of steel primers of approved makde and manufacture. The M.S. frame shall be covered with 5mm thick heat moulded single side prelim PVC ‘C’ channel of size 30 x 50mm to form stiles and 5mm thick and 75mm wide single side prelim PVC sheets shallbe for the top, bttom and lock rails. Paneling of 5mm thick one side prelim sheet to be fitted in the M.S. frame and sealed to the front (Prelam side) stiles and rails (which should have a 5mm 45 degree bent portion as beading) and attached to the back (white/lvory) stiles and rails (which should have a 10mm 90 degree bent portion as beading) using 2 nos. 15mm wide x 5mm thick PVC sheet beading inside the 9 degree bent beading. All stiles, rails and beading to be joined to the panel using solvent cement.An additional 5mm thick PVC strip of 20mm width is to be struck on the interior side of the ‘C’ channel using PvC solvent adhesive and 10mm thick (5mm x 20) thick 20mm width cross PVC sheet to be fitted as gap insert for top and bottom rails, etc. complete as per direction of Engineer in charge, manufacture’s specification and drawing. (For Toilet Block)

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered material etc. complete or as directed by engineer in charge. (For UGSR, Toilet Block & Chlorination Room) (PAINTS MAKE BY: ASIAN PAINTS, DULUX PAINTS, BERGER PAINTS, NEROLAC PAINTS)

Providing and fixing wsh down water closet (European type, W.C. Pan) with integral P or S trap including jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be measured and paid for separately)(A) vitreous China Pattern :(i) in white colour (For Toilet Block) (MAKE BY: CERA, HINDWARE, ROCA)

Providing and fixing plastic seat and cover for wash down water closer with C.P. brass hinges and rubber buffers. (B) Black plastic seal and cover. (For Toilet Block) (MAKE BY: CERA, HINDWARE, ROCA)

Providing and fixing chromium plated brass half trun flush cock of approved quality including fixing in pipe line etc. complete.(ii) 25mm dia. (For Toilet Block) (MAKE BY: JAGUAR, CP, ARK)

Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. brackets painted white including sutting holes and making good the same but excluding fittings.(A) Vitreous China:(ii) Flat Back washbasin 550 mm x v 400mm size. (i) In white colour. (For Toilet Block) (MAKE BY: JAGUAR, CP, ARK)

Providing and fixing C.P. brass waste for washbasin or sink. (A) 32mmdia. (For Toilet Block) (MAKE BY: JAGUAR, CP, ARK)

Providing and fixing M.I. fisher union for washbasin or sink. (A) 32mm dia. (For Toilet Block) (MAKE BY: JAGUAR, CP, ARK)

Providing and fixing screw down bib taps of following size.(A) Brass screw down bib tap polished bright. (ii) 20mm dia. (For Toilet Block) (MAKE BY: JAGUAR, CP, ARK)

Providing and fixing pillar tap, capstan head, screw down high pressure with screws, shanks and back nuts. (ii) 20mm dia. (For Toilet Block) (MAKE BY: JAGUAR, CP, ARK)

Providing and fixing Urinal of approved quality including connection with trap and with integral longitudinal flush pipe.(A) Squating plate pattern white earthenware 550mm x 300mm. (For Toilet Block) (MAKE BY: CERA, HINDWARE, ROCA)

Providing and fixing cast iron (Spun) Nahni trap of the following nominal diameter of self cleaning design with C.I. screaed down or higned grating including cost of cutting and making good the walls and floor 100mm inlet and 50mm outlet.(C) 100mm dia (For Toilet Block) (MAKE BY: JAGUAR, CP, ARK)

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [B] 20 mm. (For Toilet Block)

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with briocks Having croshing strength not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions total weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete.(i) Inside dimensions 455mmx 610mm and 450mm deep for single pipe line. (more than 10 ton) (For Toilet Block)

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials. 15 mm.dia. (For Toilet Block)

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials. 25 mm.dia. (For Toilet Block)

Stop valves / cocks Providing & fixing gun metal check or non return full-way wheel valves. 15 mm Dia.

20 mm Dia.

Providing erecting and fixing double coated ISI water tank of required capacity each with all necessary fitting and connection etc. complete on terrace.

(A) Providing sock pit of 2.00 Cu.M. Volume including excavating and filling brickbats with dry masonry work at top for 45cm. height including covering the top with stone including providing vatas in C.M. 1:3 with finishing, curing etc. complete as directed.

Providing and fixing pre-moulded compressible filler board in black colour confirming to MoRT&H Specifications (Clause 1015), having minimum density 95kg/cum.metre, non-staining with less than 1% water absorption & compression recovery of 93% minimum as per specification for 40 mm wide expansion joint including cutting to required size and shape at all levels etc. complete as directed (For Compound Wall)

Compound Gate Steel work welded in built up sections framed work including cutting ,hoisting,fixing in position and applying a priming coat of red lead paint (A) In beams and joists, channels angles Tees, flats , with connecting plates or angle cleats as in main and cross beams. HIp and jack rafters, purlins connectes to common ratfters and the like. (For Compound Wall) (MAKE BY: TATA STEEL, SAIL, JINDAL STEEL) Weight of MS section @ 50Kg/Sqm

Providing & fixing GI straight wire fencing with necessary barbed wire 12x12 guage ,weight not less than 0.157 kg/mt. rate include pin,hook,excluding MS angle etc. completed as per IS specification & directed by Engineer in charge. Barbed wire (For Compound Wall) (MAKE BY: TATA STEEL, JINDAL, STATITE 50)

Providing and fixing rolling shutter of approved make made of 80 mm wide M.S laths interlocked togather at their entire length and jointed together at the ends by end locks mounted on specially designed pipe shaft with bracket plates, guide channels and arrangement for inside and outside locking with push-pull operation including the cost of hood cover and spring etc. complete. (A)Shutter having width below 3.5M. (For UGSR)

Providing and fixing pre-casr concrete kerb stone of gray cement based concrete block 30 cm length, 30 cm height and 15 cm thick of M250 grade concrete as per approved design and including excavation for fixing in proper line and level, filling the joint with C:M 1:3 (1:cement :3 fine sand) etc. complete. (For Compound Wall)

Providing and fixing pre-cast Rubber dye / steel Dye inter locking concrete block 60 mm thick with grade of concrete M300 pnumatic compressed / vibrated mechanically and as per approved design confirming to IS 15658 : 2006 including 35 mm sand layer for levelling and filling the joint with sand in proper line and level as per guidline of IRC: Sp 63-2018 etc. Complete. (For Compound Wall)

Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at every 2000 mm center to center or shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials. (For UGSR)

Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly leveling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure). (For Gardening)

Supplying and stacking of good earth at site including royalty and carriage upto 5 km complete (earth measured in stacks will be reduced by 20% for payment). (For Gardening)

Supplying and stacking sludge at site including royalty and carriage upto 5 km complete (sludge measured in stacks will be reduced by 8% for payment). (For Gardening)

Supplying and stacking at site dump manure from approved source, including carriage upto 5 km complete (manure measured in stacks will be reduced by 8% for payment) : (For Gardening) 4.1 Screened through sieve of I.S. designation 20 mm

4.2 Screened through sieve of I.S. designation 16 mm

4.3 Screened through sieve of I.S. designation 4.75 mm

Rough dressing the trenched ground including breaking clods. (For Gardening)

Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation. (For Gardening)

Fine dressing of the ground. (For Gardening)

Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately). (For Gardening)

Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge. (For Gardening)

11.2 With grass Turf

Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately) (For Gardening)

Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (including cast of plant & water) (For Gardening) Trees Plant

Shrubs Plant

Hedge Plant

Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) : (For Gardening) Holes 1.2 m dia and 1.2 m deep

Holes 90 cm dia, and 90 cm deep

Holes 60 cm dia, and 60 cm deep

Holes 45 cm dia, and 45 cm deep.

Providing and displaying of Aglaonema Butterfly having ht.30 cm 10 to 12 fresh, healthy and attractive colorful leaves, well developed in 25 cm size Earthen pot/Plastic pot & as per direction of the officer-in-charge. (For Gardening)

Providing and displaying of Araucaria cookie having ht. 1.80 m to 1.95 m, straight, well developed, fresh and healthy with lush green leaves from bottom to top in 30 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge. (For Gardening)

Providing and displaying of Areca Palm having ht. 2.40 m to 2.70 m with 12 to 14 suckers, well developed, fresh and healthy with lush green foliage in 35 cm size of Bucket type cement pots & as per direction of the officer-in-charge. (For Gardening)

Supply, installation, testing & commissioning single girder type HOT crane with geared travelling trolly with seven meter lift complete with manually operated chain pulley block, long travel rail track (40 mm sq. bar), moving or cross girder, brake, safety device etc. & tested to 50% overload 3.0 T Capacity 9 m to 12 m span, long travel 12 m & lift 6 m to 10 m (For UGSR) (MAKE BY: MORRIS, MEEKA MACHINARY, INDEF)

Supply, installation, testing & commissioning single girder type fully Ele.ly operated EOT crane with Ele.ly operated hoist, class II duty, geared travelling trolley with seven meter lift complete with long travel rail track (40 mm sq. bar), moving or cross girder, all three motions Ele.ly operated by suitable rating motor IP 54, control panel & down pendant control block, brake, safety device, cables form motor to starter panel & other required accessories & tested as per IS Specifications. (For Chlorination ) (MAKE BY: MORRIS, MEEKA MACHINARY, INDEF) (3T Capacity)

Electro mechanical components of Pumping Station having installed capacity up to ≤ 75 kW with working load not exceding 75 KW. Supply, installation, testing & commissioning of electro-mechanical equipment of water supply pumping system viz. pumping machinery (of following type & rating), valves (SV/BFV/DPCV), Suction-delivery-discharge header pipes & specials, expansion bellows, flow meter (full bore electromagnetic - For size ≤ 1400 mm) / ultrasonic - For size ≥ 1500 mm), material handling system (motorised chain pulley block with geared travelling trolley, EOT crane of sufficient capacity), vaccum pumps with accessories or horizontal mono submersible (drain) pump with accessories including LV MCC - APFC panels, LV XLPE insulated Cu / Al armoured / PVC insulated round Copper submersible cables with tray & kits, earthing system, fire extinguisher, exhaust fan, safety accessories etc. as per specifications. (For PM East) (VERTICAL TURBINE PUMP MAKE BY: JYOTI, KIRLOSKAR, WICO) (SUBMERGED CENTRIFUGAL PUMP: MBH, AQUA, SMS) Vertical Turbine Pump 71.19 LPS 36 m Head (2 W + 1 S) Each pump set of tentative 45 KW (Rate: Rs. 27925/KW) (Rs. 27925 X 45 KW = Rs. 1256625/set)

(For PM West) Volute type submerged centrifugal 58.69 LPS 27 m Head (1 W + 1 S) Each pump set of tentative 30 KW (Rate: Rs. 27663/KW) (Rs. 27663 X 30 KW = Rs. 829890/set)

Supply, laying, testing & commissioning 1.1 kV grade, XLPE insulated, stranded Aluminium conductor, galvanised steel flat strip / round wire armoured, extruded PVC type ST2 sheathed, heavy duty cable (to be laid on wall surface with necessary clamps / in existing cable trench / cable trays / conduit / pipe sleeves at road crossing or floor as per site requirement) conforming to IS:7098 (Part-1) & IEC:60502 (Part-1) of following sizes: (For PM East, PM West) (L.T. POWER CABLE MAKE BY: HAVELLS, KEI, FINOLEX) (d)3.5 Core x 70 Sqmm

(h)3.5 Core x 185 Sqmm

Supply, laying, testing & commissioning 1.1 kV grade, XLPE insulated, stranded Aluminium conductor, galvanised steel flat strip / round wire armoured, extruded PVC type ST2 sheathed, heavy duty cable (to be laid on wall surface with necessary clamps / in existing cable trench / cable trays / conduit / pipe sleeves at road crossing or floor as per site requirement) conforming to IS: 7098 (Part-1) & IEC: 60502 (Part-1) of following sizes: (For Street light) (L.T. POWER CABLE MAKE BY: HAVELLS, KEI, FINOLEX) (d) 4 Core x 10 Sqmm

Supply, laying, testing & commissioning 1.1 kV grade, XLPE insulated, stranded Copper conductor, galvanised steel flat strip / round wire armoured, extruded PVC type ST2 sheathed, heavy duty cable (to be laid on wall surface with necessary clamps / in existing cable trench / cable trays / conduit / pipe sleeves at road crossing or floor as per site requirement) conforming to IS: 7098 (Part-1) & IEC: 60502 (Part-1) of following sizes: (For PM East, PM West) (L.T. POWER CABLE MAKE BY: HAVELLS, KEI, FINOLEX) (e) 3 Core x 16 Sqmm

(f) 3 Core x 25 Sqmm

Cable Terminals (Lugs) Providing & fitting crimping type Cable Terminals (Lugs) conforming to IS of following types and sizes (For PM East, PM West) (CABLE TERMINAL MAKE BY: DOVELS, HEX, JENSON) Aluminium Tubular Terminals(Long Barrel) (in Sq.mm.) (i)70 sqmm

(m)185 sqmm

Copper Tubular Terminals (Long Barrel) (in Sq. mm.) (e) 16 Sqmm

(f) 25 Sqmm

Providing & fitting heavy duty brass cable glands (nickel-plated) with washers & rubber ring conforming to IS, suitable for 3, 3½ & 4 core cables of following type & sizes: Double Compression Brass Cable Glands (For PM East, PM West) (CABLE GLAND MAKE BY: DOVELS, HEX, JENSON) (e) 16 Sqmm

(f) 25 sqmm

(i) 70 sqmm

(m) 185 Sqmm

Design, Supply, Installation, Testing, Commissioning of Diaphragm sealed Pressure Gauge, ±1% accuracy, Direct bottom 1/2" NPT (M) process connection, IP 67, Glycerine filled, SS304 Case with Bayonet Type Bezel, SS316 L Diaphragm, SS316 Bottom Housing Material, SS 316 Movement material, Aluminium dial with black graduation on white background, Micro Zero adjustable pointer, neoprene gasket, Blow out disc, shatter proof glass, SS tag plate etc as per IS 3624. b) 150mm dia dial size, 0 to 21 kg/cm2 (For PM East, PM West)

Point wiring for Light / Fan/ Bell/ Primary Point with 2-1.5 sq. mm & earth wire of 1.5 sq. mm (green) both are of ISI marked 1.1 kv grade FRLS PVC insulated multi strand copper wires upto max length of 10 mt, in below type of pipe erected with 6A Tissino Type ISI marked flush type switch / bell push and accessories erected on Metal / PVC/Wooden Box covered with 3 mm thick PC(Polycarbonate) /Acrylic/Laminated sheet. with necessary Lamp holder/ceiling rose / H.D.Connector as directed. (For PM East, UGSR, Security Cabin, Toilet Block, PM West) (MAKE BY: ANCHOR, JAINEX, PRECISION, LEGRAND) (a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete. (NOTE:1. For use of ZHFR/HRFR Copper wires in place of FRLS PVC wires add 5% in Item of Point wiring Item No 1-1-1 to 1-2-5 & 1-5-1 & 1-5-2.)

Point wiring for independent PLUG with following size mains earth wire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires upto 10 mt length, in following below of pipe erected complete with ISI marked 3 / 5 Pin socket and tissino type switch erected with earth continuity connection erected on Metal / PVC/Wooden box covered with 3 mm thick PC(Polycarbonate) / Acrylic/Laminated sheet. [B] 6/16A Plug and 16 amp switch with 2-2.5 sq. mm Cu. Mains from mcb d b boards. (For PM East, UGSR, Security Cabin, Toilet Block, PM West) (MAKE BY: ANCHOR, JAINEX, PRECISION, LEGRAND) (a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete (NOTE:1. For use of ZHFR/HRFR Copper wires in place of FRLS PVC wires add 5% in Item of Point wiring Item No 1-1-1 to 1-2-5 & 1-5-1 & 1-5-2.)

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate , modules erected with necessary connections as per site situation directed by Engineer In charge. (For UGSR, Security Cabin, Toilet Block) (MAKE BY: ANCHOR, JAINEX, PRECISION, LEGRAND) (5) Electronic hum Free steps EME Fan regulator cat III

(13) 6A/10A/16A/20A/25A/32A Single pole Modular MCB Switch Cat. III

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved manner as directed (For Security Cabin) (MAKE BY: ANCHOR, JAINEX, PRECISION, LEGRAND) (a)20mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size (A) With medium class Rigid PVC pipe and accessories (b) 2 wire 2.5 sq. mm (For Security Cabin) (MAKE BY: HAVELLS, KEI, FINOLEX)

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size (For UGSR,Toilet Block) (MAKE BY: HAVELLS, KEI, FINOLEX) (A) with medium class Rigid PVC pipe and accessories (a) 2 wire 4 sq. mm

Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade ISI marked copper wires of following size to be erected as directed. (For PM East, PM West) (MAKE BY: HAVELLS, KEI, FINOLEX) (k) 4.00Sq.mm 4 core round PVC sheathed

Supplying and erecting led lamps with following wattage capacity of 220 to 240 voltage, minimum 15000 burning hours life, 500 V in built-surge protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp holders, pf >= 0.5 (A) LED Lamps integral type, with PC diffuser suitable LAMP holder (iii) 10 to 15 watts CAT-III (For Toilet Block) (LED MAKE BY: PHILIPS, BAJAJ, CROMPTON)

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark Cat.III (For PM East, Streetlight, PM West) (MCB MAKE BY: L&T, SIEMENS, SCHNEIDER)

Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box having following capacity (For PM East, PM West) (MCB MAKE BY: L&T, SIEMENS, SCHNEIDER) (B) 40 Amp. CAT III

Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity (a) 6 to 32 Amp. Cat.III (For Streetlight) (MCB MAKE BY: L&T, SIEMENS, SCHNEIDER)

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) suitable for (For PM East, Streetlight, PM West) (MCB MAKE BY: L&T, SIEMENS, SCHNEIDER) (b) sheet steel double door (IP-43) (iv) 12 Way

Providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for operation on 3 phase and neutral 415V,50Hz. having characteristic of quick action & tripping with all advance feature & do not incorporate any electronic component for following Max. rating erected as directed. (For PM East, Streetlight, PM West) (RCCB MAKE BY: L&T, SIEMENS, SCHNEIDER) (ii) 40Amps. FP CAT III

Providing & erecting Approved make Ceiling Fan with double ball bearing ISI mark with Condenser 230 volt A.C.50 Hz 1200 mm sweep complete having 3 blades aluminium body and blade sets having ornamental design shanks , canopy erected with earthing. [Make shall be approved by Engineer in Charge] (For Security cabin) (MAKE BY: CROMPTON,BAJAJ, ORIENT, HAVELLS)

Supplying and erecting approved make Octagonal pole made from HR sheet steel. The pole should be made as per IS. and shall be coated with hot dip galvanizing as per IS 2629/2633/4759, suitable suspend local wind speed with integral Junction box consist of terminal plate of min 6mm Hylam sheet, standard profile 35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal and arrangement for cable termination to be erected With Suitable foundation (Included) as per details given by manufacturer considering site requirement. (C) 5 Mtr. Long 70 mm Top X 130 mm bottom dia, 3 mm thickness with 200mmX200mmX12mm base plate, 4-M16 Bolts and 600mm long J-Bolt.Approx Pole weight 46 kg (For Streetlight)

Providing and erecting street light pole bracket comprising main B Class GI pipe of 4.2 cm/require outside dia. complete with suitable B Class G.I sleeve tubing of approx. 45cms.length and suitable for 76.5 mm / 80mm. / require size pole top having sufficient fasteners for fixing the brackets and having spread of 1 mtr. length with suitable rise as per site condition & suitable welded stiffener reducer and nipple with check nut complete painted with one coat of Red oxide / PU base primer and two coats of Aluminium / PU paint. paint with following nos of arms. [A] Single Arm bracket 1 Mtr (For Streetlight)

Providing and erecting required size HOT deep Galvanised iron strip for earthing of H.T. , OCB/ ACB/ Transformer LT panel board, Motors etc. using proper clamp. (For PM UGSR TO ESR East and PM UGSR to West side)

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising, connection terminal dia of 12mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications with chamber and heavy duty cover.(approved make OEM has to submit test certificate) & having back filling compound of (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 / meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill Compound :- Earthing compound should be capable to retain moisture for long time Necessary test report must be submitted. (For PM UGSR TO ESR East and PM UGSR to West side) (b)For Electrical installation up to 11 KV in normal soil. Length of Pipe : 2.00 mtrs Back filling Compound :1 no. Bag of 25 Kg.

Supplying rubber matting of following thickness as per IS:15652/IEC 61111 (b) 4mm (For PM UGSR TO ESR East and PM UGSR to West side)

Providing pair of rubber hand gloves suitable for working on 11 KV/22 KV supply. (For PM UGSR TO ESR East and PM UGSR to West side)

Operation and maintenance of water supply scheme including operating pumping machineries and chlorination arrangements to produce potable water and supplying it to various households within project area by operating valves. The work includes making arrangements to supply duly qualified pump operator to operate pumping machineries, line man and labour to clean HW and repair leakages in the pipeline. Agency shall also provide necessary required tools and tackles to personnel employed by him for the efficient discharge of their duty. He shall procure labour license before commencing work, take labour Insurance and maintain EPF account of all personnel engaged by him. He will provide telephone/mobile at HW for ease of communication. Agency shall provide necessary stock of required chemicals i.e., Chlorine gas at site of work at his cost. The scope of work covers repairs of leakages of pipeline and valves, Operating and repairs of pumping machineries including penal boards and maintenance of all civil structures constructed by him including brooming floor, repairs to glass work in windows and ventilators, Colour work to interior and exterior of structures etc. complete. service for 1st year

Operation and maintenance of water supply scheme including operating pumping machineries and chlorination arrangements to produce potable water and supplying it to various households within project area by operating valves. The work includes making arrangements to supply duly qualified pump operator to operate pumping machineries, line man and labour to clean HW and repair leakages in the pipeline. Agency shall also provide necessary required tools and tackles to personnel employed by him for the efficient discharge of their duty. He shall procure labour license before commencing work, take labour Insurance and maintain EPF account of all personnel engaged by him. He will provide telephone/mobile at HW for ease of communication. Agency shall provide necessary stock of required chemicals i.e., Chlorine gas at site of work at his cost. The scope of work covers repairs of leakages of pipeline and valves, Operating and repairs of pumping machineries including penal boards and maintenance of all civil structures constructed by him including brooming floor, repairs to glass work in windows and ventilators, Colour work to interior and exterior of structures etc. complete. service for 2nd year

Operation and maintenance of water supply scheme including operating pumping machineries and chlorination arrangements to produce potable water and supplying it to various households within project area by operating valves. The work includes making arrangements to supply duly qualified pump operator to operate pumping machineries, line man and labour to clean HW and repair leakages in the pipeline. Agency shall also provide necessary required tools and tackles to personnel employed by him for the efficient discharge of their duty. He shall procure labour license before commencing work, take labour Insurance and maintain EPF account of all personnel engaged by him. He will provide telephone/mobile at HW for ease of communication. Agency shall provide necessary stock of required chemicals i.e., Chlorine gas at site of work at his cost. The scope of work covers repairs of leakages of pipeline and valves, Operating and repairs of pumping machineries including penal boards and maintenance of all civil structures constructed by him including brooming floor, repairs to glass work in windows and ventilators, Colour work to interior and exterior of structures etc. complete. service for 3rd year

Operation and maintenance of water supply scheme including operating pumping machineries and chlorination arrangements to produce potable water and supplying it to various households within project area by operating valves. The work includes making arrangements to supply duly qualified pump operator to operate pumping machineries, line man and labour to clean HW and repair leakages in the pipeline. Agency shall also provide necessary required tools and tackles to personnel employed by him for the efficient discharge of their duty. He shall procure labour license before commencing work, take labour Insurance and maintain EPF account of all personnel engaged by him. He will provide telephone/mobile at HW for ease of communication. Agency shall provide necessary stock of required chemicals i.e., Chlorine gas at site of work at his cost. The scope of work covers repairs of leakages of pipeline and valves, Operating and repairs of pumping machineries including penal boards and maintenance of all civil structures constructed by him including brooming floor, repairs to glass work in windows and ventilators, Colour work to interior and exterior of structures etc. complete. service for 4th year

Operation and maintenance of water supply scheme including operating pumping machineries and chlorination arrangements to produce potable water and supplying it to various households within project area by operating valves. The work includes making arrangements to supply duly qualified pump operator to operate pumping machineries, line man and labour to clean HW and repair leakages in the pipeline. Agency shall also provide necessary required tools and tackles to personnel employed by him for the efficient discharge of their duty. He shall procure labour license before commencing work, take labour Insurance and maintain EPF account of all personnel engaged by him. He will provide telephone/mobile at HW for ease of communication. Agency shall provide necessary stock of required chemicals i.e., Chlorine gas at site of work at his cost. The scope of work covers repairs of leakages of pipeline and valves, Operating and repairs of pumping machineries including penal boards and maintenance of all civil structures constructed by him including brooming floor, repairs to glass work in windows and ventilators, Colour work to interior and exterior of structures etc. complete. service for 5th year

M/S Krishna Construction Co.