Provision of Limited Height Subway (LHS) in lieu of manned LC No. ST-75 at Km. 118.60 between Boinda (BONA) -Jarapada (JRPD) stations in Sambalpur (SBP) - Angul (ANGL) section of Sambalpur Division by Air pushing method.

handling, rehandling, loading, unloading, freight, transportation, vehicles, deploring and when &

where required and crossing one or more lines if necessary. (d) All taxes including GST, royalty and

all incidental charges complete.

Item- 1 The items under this schedule should be executed under the supervision of S&T Department.

S No. Item No Description of Item Unit Qty Rate Amount

SAMBALPUR DIVN-ENGG/ECOR

1 1 Alteration of wiring in existing apparatus Numbers 4.00 3583.00 14332.00

cases full/half. This includes supply of all

materials in connection with alteration in

wiring. All the materials shall be supplied

by the contractor at his own cost. This

includes entry of cables, sand filling and

masonry work involved. Lettering and

painting to be done by the contractor at

his own cost. Railway shall supply only

relays and relay bases.

2 2 Dismantling of existing LC gates and Numbers 1.00 10461.00 10461.00

related gears. This includes dismantling,

stacking, accountal of all the materials

including transportation of all the

released materials to the Railway store.

3 3 Dismantling of the signal post/warning Numbers 4.00 3042.00 12168.00

board/Location box with complete fittings.

This includes dismantling, stacking and

accountal of all the materials including

transportation of all released materials to

the Railway store or as instructed by the

4 4 Dismantling of the RCC structure of Numbers 4.00 4306.00 17224.00

Home/Str. or any other signalling

structure with complete fittings. This

includes dismantling, stacking and

accountal of all the materials including

transportation of all released materials to

the Railway store or as instructed by the

5 5 Fixing of cable route marker as per Numbers 50.00 706.00 35300.00

drawing in" section-H" at a distance of

20/50/100 mtrs. Along the trench and at

places where the cable route has taken

diversion as per instruction of site

Engineer, this includes casting of

foundation at site and fixing of the

marker in the foundation made earlier at

site as per railway directives and

specifications, this includes proper curing

of the structure, All materials required for

this like cement, sand 15 mm chips and

steel rod of ISI marks should be supplied

by the tenderer.

6 6 Excavation of trenches of depth 0.8 Meter Kilometre 1.00 71060.00 71060.00

and width 0.3 Meter detailed below

including clearing of roots and trees etc.

for all types of soil. This work also

includes covering of cables laid in trench

and backfilling, ramming, consolidation of

soil as well as disposal of extra soil after

cable is laid as specified in Guidelines on

Signalling Cable laying given by RDSO

and any latest circular issued by

CSTE/ECoR/BBS. Note: Before refilling of

the trenches, the cable laid are to be

tested and recorded for its insulation

value and after satisfaction of site

Engineer the refilling process should start

and after monsoon the route is to be

attended for backfilling the rain cuts,

wash out of soils where ever found.

SAMBALPUR DIVN-ENGG/ECOR

7 7 Excavation of trenches in all kinds of soils Metre 120.00 335.00 40200.00

including soft rocky area and clearing of

track etc. to a depth of 1.0 M and width of

0.3 M for track crossing /pucca road/level

crossing gate/platform/station circulating

area or any other place as advised by site

Engineer including transportation and

laying of DWC/RCC/Split RCC/G.I. pipes

with or without coupler. This includes

repairing of track/pucca road/level

crossing gate/ platform/station circulating

area surface to original position by

ramming and concreting wherever

required soon after the work is over.

DWC/RCC/GI pipes shall be supplied by

the Railway. DWC pipes wherever

required shall be supplied in 6 Mtr. length

and shall be cut to size as per

requirement. All other materials including

cement are to be supplied by the

8 8 Excavation of trenches including clearing Metre 100.00 255.00 25500.00

of roots of trees etc., in rocky area up to a

depth to be indicated by Railway Engineer

at site as per the site condition [Minimum

0.6 meter] and width 0.3 Mts. at the

bottom. This includes concreting &

plastering as per the instructions of site

Engineer and complete b a c k fi l l i n g by

digging earth from a lead of 30 Mtr. In

case 0.8 meter depth or higher is

achieved no concreting is required,

otherwise concreting up to 100 mm

thickness should be done. All materials

required for the above works shall be

supplied by the Contractor.

9 9 Cutting of masonary floor/walls at station Numbers 2.00 6108.00 12216.00

building/ signal goomty/ Gate lodge at a

depth of 0.5 mtr. to 1.0 mtr a t places to

be indicated by site Engineer for entering

of cables inside the building. Only G.I

pipes supplied by Railway and all

materials as clamps, bolts & nuts as

instructed by site Engineer supplied by

tenderer. This includes repairing of

masonary floors/walls after the cables are

taken inside. Cement, Sand required for

the work shall be supplied by the

tenderer and also transportation of G.I

Pipe from Store by the tenderer.

SAMBALPUR DIVN-ENGG/ECOR

10 10 Trenching and fixing of G.I. pipes of Metre 60.00 533.00 31980.00

different sizes/DWC pipes in hard rocky

area up to a depth of 0.3 M to 0.6 M or at

places as per instruction of site Engineer

and concreting [1 : 3 : 6] up to height of

100 mm above the pipes. G.I. pipes with

the socket/ DWC pipes shall be supplied

by the Railway. All other materials

required for the works shall be supplied

by the contractor. Note: [1] In case of

girder bridges, G.I. pipes shall be suitably

clamped by the contractor as advised by

the site Engineer. Clamps shall be

supplied by the contractor. [2] The work

including excavation of trenches in hard

rock area up to a depth of 0.3 M to 0.6 M

and back filling, ramming after

completion of work where ever required.

[3] In case of concrete bridges clearing of

ballast for laying of pipes and re

arranging the Railway ballast after

completion of work shall be done by the

11 11 Laying of Signalling/4 Quad/ 6 Quad/ Kilometre 8.00 24389.00 195112.00

Power Cable/Telecom cables/ Jelly filled

cables of all sizes in excavated trench,

through GI/RCC/DWC pipes etc. wherever

required. This includes transportation of

cables from the stores to work site and

transportation of empty cable drums with

left over cables from site to the stores at .

The length of cable laid includes the

length of cable coil for termination

purpose. NOTE: The cables are to be

carefully handled during loading, un-

loading and transportation to work site.

Any damage found in the cable after final

testing, in view of mishandling of cables,

shall be made good by the Tenderer.

Cable should be maggered before and

after laying and recorded in a register

and submitted to the site Engineer.

SAMBALPUR DIVN-ENGG/ECOR

12 12 Transportation, excavation of pit, casting Numbers 4.00 19438.00 77752.00

of foundation, plastering and erection of

Steel Apparatus case (full size) with fixing

of E-Type lock, wiring, cable entry,

termination clamping, filling cable pit with

sand, painting and lettering etc., as per

Drg.No. S&T/CON/SK/16. This includes

earth work and/or masonry work required

for securing the apparatus case as per

site condition. Railway will supply

apparatus case with 'E' type lock only

from Railway stores at. Tenderer will

supply all wiring materials, PBT

Terminals, fuses, fuse blocks, bus bars,

hylum sheet ISI mark [6mm thickness],

wood plank board of good quality

[minimum 3/4" thick, Cement and

transport all the materials to site of work

at his own cost. The wiring materials such

as wire coils, PBT terminals, fuses, fuse

block, etc. should be used from RDSO

approved sources. 1) Modification of

inside arrangement of Apparatus cases if

required for fixing of relays/transformers

etc. shall be done by the contractor. Extra

shelf, if any, shall be deposited to the

Railway stores by the contractor. 2) All

cables shall be terminated by providing

copper eyelet of suitable size. Note:-(i) If

location box foundation is available at

site 20% of the cost is to be deducted.(ii)

40% payment shall be released after

erection of location boxes.

13 13 Horizontal direction drilling/boring without Metre 200.00 1649.46 329892.00

damage of surface of road/track

formation. The bore shall be 150 mm dia.

and shall be at the proper depth as per

site conditions decided by Enginer-

incharge. The ground level shall be

considered ignoring the bankheight of the

bank of the road. The length of the bore

shall be minimum 04 Mtrs long. This

include insertion of different dia.

DWC/GI/HDPE pipes coupling etc as per

direction of Engineer-in-charge. NOTE:

The cost of pipe is not included in this

item. Contractor shall provide all material

required for boring and adequate nos. of

labourers for proper laying of cables in to

the bore. Cable shall be laid cautiously so

that it should not get damage due to

rough handling and pressure on cable.

SAMBALPUR DIVN-ENGG/ECOR

14 14 Supply, transportation, installation, Numbers 4.00 12306.00 49224.00

testing and commissioning of earth

electrode (make TATA or Jindal as per Rly.

practice) icluding MS flate for signalling

equipments on lever frame, appratus

case, signal, relay racks, cable

termination rack, block instument etc. (

supply & installation of earth electrode as

RE/S&T/DRG/Tender/SK/398/04 for

apparatus cases, signal post & other

equipments as per instruction on earthing

of S&T equipment. Laying of earth lead

mid steel flat of size 35mmx6mm and

fixing of lead MS flat (make TATA/Jindal or

Similar) to earth electrode and lever

frame,signal post & appratus cases as

perDrg. No. CORE/S&T/ALD/SK/591/2008,

592/2008 and 593/2008 respectively and

instructions on earthing at S&T

equipment and providing cement

enclosure for earth electrode as per

drawing no. RE/S&T/Sig/Tender/SK/13/85

Alt.A) NOTE: This includes testing of earth

value and indicating the same on the

Earth enclosure by paint.

15 15 Transportation of signal posts for multiple Numbers 3.00 20931.00 62793.00

aspect color light signals, complete with

signal units, bases, ladders and other

fittings, excavation of pit, casting of

cement concrete foundation, plastering

as per Drg.No Con/SK/T/12, erection and

fixing of complete fittings of the 2/3/4

aspect signal/signal posts including

termination of cables, wiring, LED fixing,

signal testing and focusing. Name plate &

marker and all other materials shall be

provided by the contractor at his own

cost. Required cement shall be supplied

by the contractor. Arrangement of

Screening to be provided by the

contractor if required as instructed by site

Engineer. Contractor shall prepare jointly

with Railway Engineer at site and submit

Signal Sighting report and Signal test

report as per approved format of Railway.

NOTE: (i) 50 % Payment shall be released

after erection of signal post. Balance 50

% shall be released after termination of

cable, wiring, painting, testing & focusing

of signal. (ii) If foundation is available at

site 30% of the cost is to be deducted.

on G.I. Pipes on bridges/ culverts or any

other location as specified by the Rly.

supervisor. All materials including cement

required for the above works are to be

supplied by the tenderer.