Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.3 LAccepted-AOC | L1 | Accepted-AOC found lowest | |
| 2 | L2₹18.9 L+₹59,848.60 (3.28%)Rejected-AOC VPO DHANNA DISTT KATHUA J K PIN 184152 | KATHUA | JAMMU AND KASHMIR | 184152 | L2 | Rejected-AOC not found lowest | |
| 3 | L3₹19.5 L+₹1.2 L (6.70%)Rejected-AOC | L3 | Rejected-AOC not found lowest |
Tender Value
₹18.9 L
EMD Value
₹37,780
Closing Date
19 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Basoli
GE Basoli PO Lakhanpur Distt Kathua 184152
PROVN OF 02X TOILET CUM BATHROOM NEAR BLDG NO P-32 FOR 40 MEN WITH 08XWC 05XBATHROOM 02XURINALS 03XWASHBASIN AT JANGLOT UNDER GE BASOLI
2023_MES_596734_1
GE/BAS-11/2023-24
Open Tender
Civil Works
Item Rate
180 days
janglot under GE Basoli
Class E Catg a (i)
7 documents required · 7 mandatory
₹500
GE Basoli
₹37,780
8 Sept 2023
19 May 2023
21 Jun 2023
19 May 2023
19 Jun 2023
5 Jun 2023
Amount
Excavation in trenches in any type of soil n.exc 1.50m wide and n. exc 1.50m in depth for foundation of pole/stay and laying of UG Cable and other and getting out in any type of soil complete all as specified and directed.
Surface dressing n. exc.30cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed.
Removal of excavated (soil) to a distance not exceeding 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and directed.
Returning, filling in, including spereading, leveling, watering and well ramming in layers not exc 25cm complete all as specified and directed
M&L Cement Concrete in foundation filling and mass concrete of mix 1:4:8 type D2 (40mm graded aggregate) complete all as specified and directed.
M&L Brick work with sub class 'B' bricks straight of curved on plan exc 6m mean radius built in CM 1:6 including flush pointing with same mortar as the work proceed complete all as specified and directed.
M&L brickwork with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed
M&L Rendering 15 mm thick on other than fair faces of brick work or concrete surfaces with 1:6 CM on internal faces of wall, finishing the surfaces even & smooth w/o using extra cement complete all as specified and directed.
M&L Rendering 15mm thick on brick or concrete surface in CM 1:4, finished even and smooth with out using extra cement complete all as specified and directed
M&L Rendering 10mm thick on fair faces of concrete surfaces with 1:3 CM on ceiling surfaces etc., finishing the surfaces even & smooth w/o using extra cement complete all as specified and directed.
M&L Reinforced cement concrete M-25 (Design mx) using 20mm graded crushed stone aggregates as in foundations, including rafts, footings, foundation beams, plinth beams, bsaes of columns etc basement slabs, under-reamed piles and mass concrete complete all as specified and directed
M&L Reinforced cement concrete M-25 (Design mx) using 20mm graded crushed stone aggregates as in slabs, supported on walls, beam and columns in floors, and in shelves and the like complete all as specified and directed.
M&L Reinforced cement concrete M-25 (Design mx) using 20mm graded crushed stone aggregates as in columns, pillars ,piers,posts and struts complete all as specified and directed
M&L Reinforced cement concrete M-25 (Design mx) using 20mm graded crushed stone aggregates as in beams ,chhaja,cantilevers, bressummers, lintels over 1.5 mtr span complete all as specified and directed
Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and sofits of foundation and plinth beams; and similar works; vertical or to batter for rough finished flat surfaces complete all as specified and directed
Form work to edges of concrete flats, breaks in floors, openings in concrete walls,floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping and similar work all exceeding 20 cm wide for rough finished flat surfaces of concrete complete all as specified and directed
Form work to sides of pillars, posts, struts, piers, columns and stanchions for rough finished flat surfaces of concrete complete all as specified and directed
Form work to soffits of suspended slabs such as roof slabs, floor slabs etc not exceeding 200mm thick complete all as specified and directed.
M&L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed
-ditto- here-in-before but 8mm dia and over upto and including 10mm dia as in stirrups, spacers, binders complete all as specified and directed.
M&L 75 mm thick Cement concrete 1:4:8 type D-2 (using 40 mm graded agg) as in sub base complete all as specified and directed
Non-skid Ceramic tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.18 sqm but n . Exc 0.38 sqm ,in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match shade including 15 mm screed bed in CM 1:4. all complete all as specified and directed.
Non-skid Ceramic tiles 7 to 8 mm thick (square /rectangular) area of each tile n . Exc 0.18 sqm ,in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match shade including 15 mm screed bed in CM 1:4. all complete all as specified and directed
M&L Glazed ceramic coloured tiles in vertical surfaces 450x300X7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match required shade with 10 mm thick cement plaster in C.M 1: 4 . All complete all as specified and directed
S&F steel window/ventilator factory made out of box type frame and shutter (double shutter, one for glazing another for flyproofing) made out of section using flash butt welding, hinges shall be provided to both shutters complete including all fittings and grills, all as per drg No CEPZ/TD/27/13 Sh 1/4 to 4/4 all as complete all as specified and directed.
S&F Sheet glass 4.00 mm thick frosted glass, and glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specified and directed.
S&F Galvanised MS wire cloth 0.46mm nominal dia of wire and average width of aperture 1.18mm, complete all as specified and directed
S&F Solid PVC door frame (single rebated) of size 60mmx30mm made out of solid PVC frame with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100x8 sheet metal CSK screws complete all as specified and directed and as shown on drawing .
S&F Factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2,4 or 6 raised panel design with 2mm thick moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.
S&F 100 mm long stainless steel butt hinges with SS screws complete all as specified and directed.
S&F AluminIum anodised barrel tower bolt of size 150mm extruded section complete all as specified and directed.
S&F Extruded aluminum alloy handles of size 150mm fabricated type anodized complete all as specified and directed.
S&F Pressed steel frame for doors with one or more rebates including necessary fixing lugs ,hinges, lock strike plate size of frame 125X60mm complete all as specified and directed.
PCC 1:3:6 type C-1 using 20 mm graded stone agg as in back filling of pressed steel door frames and hold fast. complete all as specified and directed
S&F Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, 30mm thick complete all as specified and directed.
S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
M&L for Spreading and levelling in layers n exc. 25 cm thick and watering and well ramming under floor complete all as specified and directed
M&L Hardcore of gauge n. exc. 63mm broken stone boulders, deposited spread and levelled in layers n. exc. 15cm thick, watered and rammed to a true surface in broken bricks boulders complete all as specified and directed.
M&L 75 mm thick 1:3:6 type C-2 using 40 mm graded agg in plinth ,sub floor,sub base etc.laid in alternate bays finished even and fair w/o using extra cement complete all as specified and directed.
M&L For Preparation of new plastered surface and applying two coats of 100% Premium acrylic emulsion paint having VOC less then 50 gm/litre and UV resistence as per IS 15489:2004, Alkali & Fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. complete all as specified and directed.
M&L Preparation of new steel surfaces of any description exc 10 cm width or girth and apply two coats of synthetic paint over a Red Primer complete all as specified and directed.
M&L Preparation of new plastered surfaces and applying two coats of distemper oil emulsion on plastered surfaces complete all as specified and directed.
M&L Prepration of new plastered surfaces on ceiling over applying three coats of white washing complete all as specified and directed.
M&L Painting to new wooden surfaces including prepration applying one coat of pink primer and two coats of synthetic paint complete all as specified and directed.
M&L for roof treatment with the following specification - Removing existing water proofing treatment and applying water proofing treatment on horizontal or vertical surfaces by applying oil bound bitumen primer @ 0.20 Kg/sqm and providing 3mm thick APP modified water proofing membrane weighing not less than 3 Kg/sqm reinforced with non-woven polyester matt weighing not less than 160 gm/sqm, The overlap shall be minimum 100mm on transverse direction and 75 mm on longitudinal direction and sealing overlap by torch application and bonded and applying a coat of blown grade hot bitumen 85/25 over and below the membrane @ 1.20 Kg/sqm in drying over the membrane finished with solar reflective bituminous aluminium paint/ primer @ 0.10 Kg/sqm over RCC roof slab/ parapet after cleaning the surfaces by removing dust, dirt etc. as per manufacturer’s instructions including 15mm thick screed in CM 1:4 and all as specified and as directed. NOTE :- The work shall be executed at site by the authorised applicator of APP and as approved by the GE.
S&F of flushing cistern with 10 ltrs discharge capacity PVC flushing cistern low level with inlet ball valve etc complete all as specified and directed .
S&F Vitreous china wash basin white , flat back size 550 X 400 mm including brackets including cutting for and pinning in ends of brackets or erecting stand including PTMT 32mm waste coupling and waste pipe complete all as specified and directed, Make : Hind ware, Cera, Paryware.
S&F in Vitreous China wash down water closet pan (orissa pattern), white 580x440 with intergral foot rest. complete all as specified and directed
S&F viterous china water closet pedestal pattern with P or S trap incl connection to flush and water pipe etc complete all as specified and directed
S&F EWC seat cover white flat bottom solid with CP hinging device, nuts & bolts etc complete all as specified and directed
S&F flush pipe of polythylene of low or high density or PVC 32mm dia, for low/high level flushing cistern complete all as specified and directed.
S&F Vitreous china boul urinal Half stall type (white) minimum with grating and union for discharge pipe including PTMT spreader of any colour for fixing with 15mm dia pipe of Hind ware or Cera mark complete all as specified and directed.
S&F Pillar tap cast copper alloy fancy type with capstan heads, chromium plated Fancy type screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long shanks and nut screwed for iron pipe of 15 mm bore complete all as specified and directed
S&F bib taps screwed down high pressure with both ends for iron pipe 15mm bore fancy type chromium plated as complete all as specified and directed
S&F stop valve cast copper alloy ,chromium plated fancy type, screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe complete all as specified and directed.
S&F stop valve cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe with long shank chromium plated concealed type complete all as specified and directed.
S&F chromium plated shower rose with or without swivel joints 125mm size incl fixing to steel pipe complete all as specified and directed.
S&F PVC connection 15mm size with PTMT nuts of length 450mm. complete all as specified and directed
PVC shelves of PTMT fixed with and including chromium plated brass screws and plastic cleats complete all as specified and directed.
S& F mild steel Peg set of four hooks size 50mm to 60mm complete all as specified and directed.
Supply & Fixed 20mm bore dia of tubing with screwed socket joints, medium grade galvanized steel with all necessary tube fittings and fixing complete with clips, wall hooks etc to wall and ceilings or laid in floor including necessary changing and cutting in brick/concrete surfaces and making good the disturbed surface complete in all respect complete all as specified and directed.
Supply & Fixed 15mm bore dia of tubing with screwed socket joints, medium grade galvanized steel with all necessary tube fittings and fixing complete with clips, wall hooks etc to wall and ceilings or laid in floor including necessary changing and cutting in brick/concrete surfaces and making good the disturbed surface complete in all respect as specified in CM 1:4 complete all as specified and directed.
S&F PVC (SWR) pipes single socketed in any length with rubber ring joints of 75 mm bore fixed in trenches or floor complete all as specified and directed.
–ditto- per item No 64 but as fixed on walls complete all as specified and directed .
–ditto-as per item No 64 but dia of pipe 110 mm complete all as specified and directed.
S&F PVC (SWR) bends of (any radius) with access door of 75 mm bore complete all as specified and directed.
S&F PVC (SWR) bends of (any radius) with access door of 110 mm bore complete all as specified and directed.
S&F PVC (SWR) junction single (Double T) equal or unequal provided with access door 110 mm bore complete all as specified and directed.
S&F PVC (SWR) junction single (single T) equal or unequal provided 75 mm bore complete all as specified and directed.
PVC reducers 110 x 75 mm complete all as specified and directed.
S&F 75mm dia PVC (SWR) floor traps, plain with grating including jointing to waste pipe with solvent cement complete all as specified and directed.
S&F PVC (SWR) P trap 110mm bore complete all as specified and directed.
S&F 75mm PVC(SWR) vent cowl complete all as specified and directed.
S&F water tank with rotational moulded polythene water storage tank (cylindrical vertical with closed top) of 1000 Ltr capacity hoisted and fixed in position with 20mm PTMT ball valve all as specified in SSR Part I complete all as specified and directed.
S&F Gun-metal Globe or gate valves 20 mm nominal bore dia with gate with iron wheel head screwed both ends for iron pipes and fixed complete all as specified and directed
M&L Granite black colour of any type 18-20mm thick machine cut as in cooking plateforms and like in cement mortar ( 1:4 ) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and 20mm thick screed bed or bedding layer of mortar in cm 1:6 for laying floor finishes complete all as specified and directed.
M&L Rounding/moulding to edges of stone slabs, marble stone, granite stone slabs one edge, such as in steps, cooding platform , and other similar situations etc complete all as specified and directed.
M&L broken stone or boulder hardcore of guage n.exc. 63 mm diposited , spread and levelled in layers n. exc. 15 cm thick, watered & rammed to a true surface complete all as specified and as directed.
M&L for Pre-polished glazed designer ENDURA tiles, coloured 30cm x 30cm x 8-10mm thick set jointed and pointed in neat cement slurry pointed in white or coloured cement to match in floors over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.
M&L concrete bed to drain pipes including benching under and haunching in cement concrete 1:4:8 type D2 (using 40mm graded crushed stone aggregate) for 150 mm dia pipe complete all as specified and directed. .
Material and labour for Reinforced concrete pipes 150 mm bore , class NP3, laid and jointed complete with collars, jointed with cement mortar, laid in trenches and tested including fittings of same grade complete all as specified and directed.
M&L for rendering 15 mm thick in CM 1:4, on external surface by using WPC @ 3% by weight of cement) , WPC shall be measured and paid separitely etc. finished even and smooth without using extra cement. NOTE:- The WPC shall be paid seperately in respective item
Supply only liquid water proofing compound, complete all as specified and directed.
M&L PCC 1:2:4 type B-1 ( using 20 mm graded crushed stone aggregate) as,coppingKerb stone, steps and other similar bands plinth courses, string courses, lacing courses, copings, kneelers, appex stones, bed plates, kerbs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed
M&L for RCC 1:2:4 type ‘B1’ (using 20mm graded stone aggregate) in precast manhole cover and cover slab for septic tanks and including necessary forms and moulds etc and set in cement mortar 1:6 and including demolition of old slab, complete all as specified and as directed.
M&L For TMT Steel bars 6mm to 8 mm dia in reinforcement,cut to length, bent to shape required incl cranking bending spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed..
Material and labour for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or ¾ section) in plain cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required, internal dia of pipe 150mm all as specified and directed.
Supply & Fixed 25mm bore dia of tubing with screwed socket joints, medium grade galvanized steel with all necessary tube fittings and fixing complete with tee bend elbow union socket clips, wall hooks etc to wall and ceilings or laid in floor including necessary changing and cutting in brick/concrete surfaces and making good the disturbed surface complete in all respect complete all as specified and directed.
S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed to 25 mm bore pipe complete all as specified and as directed.
Supply and fix for DWC high density polyethylene pipes having dia 63 /50 mm as per site requirement having corrugation on the wall and plain surface on the wall conforming to IS: 14930(Part I & II) for protection of underground cable laid along pole/along wall/in PCC on GL/roof and including all fittings as required complet all as specified and directed.
Point wiring with 1.5 Sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable in and incl rigid PVC conduit concealed medium grade with pressed mild steel terminal boxes(sheet not less than 1.6 mm thick) duly painted with a coat of red oxide primer with suitable thickness plastic laminated sheet cover 3mm thick of adequate size for one light or one fan controlled by one switch incl 1.5 Sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable as earth wire(green colour) to common earth dolly complete all as specified and directed by Engr-in-charge.Note: a) Rate for cutting chases for conduits and sinking for boxes and making good to wall, floors deemed to be included in each point etc (b) On RCC roof ceiling PVC conduit shall be provided on surfaces for any necessary point with proper fixing clips and no extra cost shall be paid for the job etc complete all as per specified and directed.
All as per item No 2 but for one 3 pin 5 Amp socket outlet on independent board complete all as per specified and directed.
All as per item No 2 but for one 3 pin 5 Amp socket outlet on same board complete all as per specified and directed.
Point wiring with 2.5 sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable drawn in and including rigid PVC concealed conduit medium grade of suitable size with sunk cast iron/pressed steel terminal boxes(sheet not less than 1.6mm thick) of adequate size with suitable thickness plastic laminated sheet cover 3mm thick for one 3 pin socket outlet 15 Amp on independent board including continuous 2.5 sqmm FRLS,PVC insulated and unsheathed copper conductor cable (multistranded) as earth wire to common earth dolly, complete all as per specified and directed.
Supplying & Fixing switch piano flush button single pole one way 5 amps 230 volts, complete all as per specified and directed.
Supplying & Fixing switch piano flush button single pole one way 15 amps 240 Volts, complete all as per specified and directed.
Supplying & Fixing socket outlet 6 amps 5 pin flush type, 240 volts, complete all as per specified and directed.
Supplying & Fixing socket out let, 5 pin, 15 amps multi purpose 2 in 1 flush type, 240 volts AC, complete all as per specified and directed.
S&F Lamp holder, PVC/Polycarbonate type with back plate having matching colour to holder suitable for angle/batten fittings complete all as per specified and directed.
S&F ceiling rose surface bake lite two to three terminal isolated body fixed on PVC round block complete all as per specified and directed.
S&F in replacement LED tube light fitting 20w,230v, including LED 4 feet Batten type fitting fixtures, complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as per specified and directed. Make Crompton/Havells / wipro/HPL or equivalent.
S&F in replacement LED tube light fitting 10w,230v, including LED 2 feet Batten type fitting fixtures, complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as per specified and directed. Make Crompton/Havells / wipro/HPL or equivalent.
S&F in replacement sheet metal powder enclosure powder coated versatile double door single pole and neutral (sPN) 415Volt, 50Hz AC supply for 08 way. fitted distribution board for MCB provisions for one no incoming MCB SPN and outgoing MCB SP AC 230 VOLTS 50 hzac SUPPLY HAVING PROTECTION ip-43,IK-09 with copper bus bar rated 200amps, neutral link , earth bar complete all as per specified and directed. Make - Legrand /C&S / IndoAssian/Benlo
S&F in replacement MCBs single pole and neutral (SPN)/isolator 40 Amps with 10 KA breaking capacity of 'C' series in distribution boards complete all as per specified and directed. Make - Legrand /C&S / IndoAssian/Benlo
S&F in replacement MCBs single pole and neutral (SPN)/isolator 6-32 Amps with 10 KA breaking capacity of 'C' series in distribution boards complete all as per specified and directed. Make - Legrand /C&S / IndoAssian/Benlo
Supply and fixing exhaust fan plastic body AC single phase 230 v OF SIZE 200mm sweep with blades frame and louvers complete all as specified and directed..
Supply ,fixing and testing water heater storage type with mautifunctional safety valve,electric operated 230 V,single phase complete including one no of heating element,automatic thermal cut out,flusible plug,anti vacum sys,built in presser release valve,thermostat,rust proof powder coated body,indicator lamps and all safety advices as per IS capacity 25 litres including suitable and making good distribution surface complete all as specified and directed
M&L for Earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.5 of SSR Part-I (2009) including filling of charcoal dust , common salt all around Earth plate upto 150mm, 20mm bore GI medium grade watering pipe, 15 mm bore light grade earth lead protection pipe upto main board, funnel with wiremesh, 40mm thick RCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate reinforced with suitable handle and angle iron frame and necessary excavation and earth work in any type of soil etc. complete all as specified and as directed including testing on completion. (Note: The rate quoted include cost of min 7.5 metre earthling wire .)
Supply,laying and testing cable XLPE insulated ,screened PVC bedded galvanised steel strip or wire armoured,electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 Sqmm 2 core complete all as specified and directed..
Supply and fix LED lamp 9 watt , complete all as specified and directed.
KHOSLA ENGINEERS BUILDERS
Amrik Construction co
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .