REPAIR / MAINT OF DADO TILES, FLOORING, PLASTERING, PLINTH PROTECTION, CHAJJAS, JOINERY AND ROOF SHEETS IN VINDHIYA VIHAR, DEMO SQN AND CAMP AREA AT AWC UNDER GE (AWC) MHOW.

Amount

Demolition of Brick work built in cement mortar including all quoins arches pillars etc complete all as specified and directed

M&L fly ash brick work with modular brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6, complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M & L rendering 10 mm thick on brick wall/cement block wall or concrete surfaces in cement mortar 1:6, surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M & L rendering 5 mm thick in cement mortar 1:3 on concrete surfaces as in ceiling surface finish even and smooth without using extra cement complete all as specified and directed..

M & L 15 mm thick rendering in cement mortar 1:4 mixed with water proofing compound as per manufacturer instruction on brick work or concrete surfaces, surface finished even and smooth without using extra cement complete. Note : WPC shall be measured and paid separately as supply only.

Supply only liquid water proofing compound all as specified and directed

M & L PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar places, surface finished even and fair without using extra cement incl necessary use and waste of form work complete, & incl demolition of PCC complete all as specified and directed.

M & L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in cills, steps, seismic and other similar bands, plinth courses, string courses, parapets and railing upto 60 cm in height, coping, kneelers, apex stones bed plates, etc and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary use and waste of form work & also including demolition of existing PCC complete, all as specified and directed.

Complete removal of exisiting wall treatment on old plaster or concrete surface by scraping tin plate, leaned of all laitance , loose material, oil grease by mechanical means such as wire brushing & shot blasting , finally vacum cleaning of all loose solid particals complete all as specified and directed.

M&L for applying 1 mm thick wall care putty on wall on internal old/new wall surfaces as per manufacturerer instruction complete all as specified and as directed

M & L for applying two coats of oil bound distemper over a coat of alkali resistant primer on prepared wall putty surfaces of internal wall all including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as per specified and directed.

M&L preparing of newly plastered or unplastered surfaces of walls, cornices etc and applying two coats of cement base paint over one coat of cement primer, complete all as specified & directed.

Taking down eaves gutters and rain water pipes (any size or pattern), including all fitting ,heads,shoes,bends,swan-necks,etc including removal from site all as specified.

S & F PVC pipes 110 mm bore single socketed in any length with rubber ring joint and fixed to walls incluidng clamping complete all as specified and directed.

S & F PVC bends 110 mm bore any radius with solvent cement joints, fixed complete all as specified and directed.

S & F in repairs vitreous china squatting pan 'Orissa patern' size 580 mm X 440 mm, white, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti-syphonage pipe, etc complete including making good to floor complete all as specified and directed.

S & F in repairs Vitreous chaina wash down water closet pan (pedestal pattern), white including pedestrial pan and trap, including seat cover for pedestial pan and connecting to drain or outgoing pipe and to flushing pipe, antisyphonage pipe etc complete all as specified and directed.

S & F in repairs 10 litres capacity PVC low level cistern ‘ white’ with inlet, float valve and handle including flushing pipe of PVC 32 mm dia and connection to pipes complete all as specified and directed.

S & F in repairs PVC connection 15 mm dia 600 mm long with PTMT nuts at both ends complete all as specified and directed.

S & F in repairs Vitreous China bowl urinal flat back, size, of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe complete all as specified and directed.

S & F in repairs vitreous china wash hand basin white or any colour , flat back of size 550mmx400mm fixed on cast iron cantilever bracket with brass waste coupling and waste pipe include fixing taps complete all as specified and directed.

Supply only 15 mm dia bore fancy type chromium plated pillar tap, cast copper alloy, with capstan heads, screwed down high pressure with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and directed.

S & F in repairs 15 mm dia bore fancy type chromium plated pillar tap, cast copper alloy, with capstan heads, screwed down high pressure with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and directed.

S&F in repairs PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints with solvent cement fixed to walls incluidng clamping complete all as specified and directed.

Description same as per Item No. 25.00 but bore of pipe 110 mm complete all as specified and directed.

S & F in repair 110 mm dia bore PVC (SWR) bends any radius with solvent cement joints, fixed to complete all as specified and directed.

Description same as per Item No. 27.00 but bend 75 mm complete all as specified and directed.

S & F in repair 110 mm dia bore PVC (SWR) junction single, single (T) equal or unequal, joints with solvent cement,complete all as specified and directed.

S & F of CPVC 20 mm outer dia pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl taking up or down steel tubing pipes complete all as specified and directed.

S & F of CPVC 25 mm outer dia pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl taking up or down steel tubing pipes complete all as specified and directed.

S & F of CPVC brass elbow (3/4" X ½") for 20 mm outer dia CPVC pipe complete all as specified and directed.

S & F of CPVC Male Brass Threaded Adaptor (MTA/ MBTA) for 25 mm outer dia pipe complete all as specified and directed.

S & F of CPVC Ball Valve for 25 mm outer dia pipe complete all as specified and directed.

S&F Rotational moulded poly-ethylene water storage tanks (Three layered) ( cylinderical vertical with closed top ) 500 litres capacity ,hoisted and fixed in position including dismantling of PVC water tanks exc 250 ltr but not exc 500 ltr complete all as specified and directed.

S&F Rotational moulded poly-ethylene water storage tanks (Three layered) ( cylinderical vertical with closed top ) 1000 litres capacity ,hoisted and fixed in position including dismantling of PVC water tanks exc 500 ltr but not exc 1000 ltr, complete all as specified and directed.

S&F in repairs ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball , suitable for 25 mm bore pipe, screwed for iron pipe and fixed. .(Minimum weight 25mm-455 gms.) complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description complete all as specified and directed.

S & F Rolled mild steel in joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. for bracket, water tank stage, clading, guard bar with frame and similar wk etc conforming to Fe 410-W (Gde-E- 250) quality-A. The rates also include for where required, notching, drilling, fitting, riveting and/or welding, complete all as specified and directed.

S & F in repairs 15 mm bore bib taps chromium plated fancy type cast copper alloy crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, and fixed complete all as specified and directed.

S & F in repair Bidet spray (Health faucet) with 1 meter tube and holder, complete all as specified and directed.

S & F in repairs chromium plated fancy type stop cock/angle cock 15 mm dia cast copper alloy screwed down, high pressure, with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed, complete all as specified & directed.

S & F in repairs 15 mm bore two way bib taps, chromium plated cast copper alloy long body , screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over in section, framed work in any position, complete all as specified and directed.

S & F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., complete all as specified and directed.

Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings, complete all as specified and directed.

S & F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

M & L Preparation of new or previously untreated steel and iron surfaces of any description, not otherwise description, over 10 cm width or girth apply two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified and directed.

M & L Preparation of old iron surfaces of any description, not otherwise description, over 10 cm width or girth apply one coat of synthetic enamel paint, complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n.exc 1.5 sqm each and removal from site ,all as specified and directed.

Description same as per Item No. 51.00 but exc 1.5 sqm but n.exc 4 sqm each, complete all as specified and directed.

Taking Down shutters of any description exc 1.00 sqm and n.exc 2.00 sqm each incl removal from site, complete all as specified and directed.

S&F factory made Solid PVC Door Frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube, all as specified and directed.

S&F 30 mm thick factory made solid panel PVC door shutter (style) consisting of frame made out of M.S. tubes of 19 gauge thick & size 19mmx19mm for stiles and 15mmx15mm for top & bottom rails. M.S. frame shall have a coat of red oxide primer of approval make and shall be covered with 5 mm thick heat moulded plain colour PVC ‘C’ channel of size 30x50mm forming stiles and 5 mm thick wide pvc sheets for top rail ,lock rail and bottom rail on either side and 10 mm (5mmx2mm) thick having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour 5mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 30 mm widex5 mm thick pvc ,sheet suitable PVC sheet beading, and joined together with solvent cement on either side,and additional 5 mm thick pvc stripes of 20 mm width is to be struck on interior side of "C" channel using pvc solvent adhesive complete at site as per specification complete all as specified and as directed.

S & F powder coated aluminum door with the following specification and making good the adjacent surfaces complete all as specified and as directed:- (a) Cross section of xchowkhat frame 101.60x44.45x2mm thick. (b) Cross section of hanging and meetng style 83x44x2mm thick. (c) Top rail of cross section 114x44x2mm thick. (d) Bottom rail of cross section 114x44x2mm thick. (e) Locking rail (middle rail ) of cross section 83x44x2mm thick. (f) 4mm thick tinted glass make Modi, float . (g) Aluminum handle eisc type -02 Nos per shutter ( inside & out side). (h) Aluminum door stopper heavy duty-01 Nos per shutter. (i) Aluminum tower bolt 200mm long-01 Nos per shutter (inside). (j) Lock with key superior quality makae and type as approved by Engr-In-Charge/GE openable both from inside & out side -01 Nos per shutter.

S & F aluminium(extruded section) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all as specified and directed.

S&F 2nd class hard wood 35 mm thick Plain, framed, pannelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, complete all as specified and directed.

S&F 2nd class hard wood 35 mm thick Glazed and skelton shutters, open rebated and prepared to receive glass, gauze etc, (without sash bars),edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc, size of members of shutters as specified in SSR Part I, Section 8, clause8.24(a) complete all as specified and directed. Note :- Glass pane and wire mesh shall be measured and paid separately in respective supply only item.

Supply only galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.00mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

M & L Preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise description, over 10 cm width or girth apply two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F aluminium anodised barrel tower bolts 150 mm long of extruded section and fixed complete all specified and directed.

S&F aluminium handles, size 150 mm cast type, anodised complete all as specified and directed.

S & F butt hinges, size 100 mm type C-21 extruded aluminium alloy with galvanised mild steel hinge pin, anodised ISI marked complete all as specified and directed

S&F 250 mm long aluminium alloy, anodised sliding door bolt with hasp, staple(bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy fixed complete all as specified and directed.

S&F powder coated aluminium ventilator cross section 63.5x38.10x1.5mm consisting of two partions upper portion shall have louvers with 3mm thick pin headed glass and aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56m fixed with aluminium beads and securing on outer face of frame and lower portion of ventilation shall be fixed with 3mm thick pin headed glass with IDPE rubber gasket including aluminium beads, including preparation of jombs all around in CM 1:3 finishing even and smooth, complete all as specified and directed.

S & F Powder coated aluminium sliding glazed windows with three track shutter sliding (two shutters glazed and one shutter wire mesh) shall be following specification complete all as specified and as directed by Engr-in-charge. (i) Windows frame of cross section 101mm x 44mm x 1.5mm thick. (ii) Three way track for sliding shutters of cross section 91.8mm x 31.75mm x1.1mm thick. (iii) Sliding shutter frame of cross section 40 x 18 x 1mm thick. (iv) 4 mm thick tinted glass superior quality. (v) IDPE Rubber guasket for fixing of glass. (vi) Locking cleats per shutter -01 Nos. (vii) Sliding rollers per shutter - 02 Nos. (viii) Aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56mm for shutters 01 Nos.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed.

M&L Granite 20 mm thick(of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plateforms and like including pointing in white cement(1:2) using marble dust with admixture of pigment to match with shade of granite over & incl 20 mm thick screed bed built in CM 1:4, complete all as specified and directed.

M&L Rounding to edges of stone slabs one edges, such as in steps, cooking platform, and other similar situations for bullnosing / moulding to exposed edges( any type) and polishing to match the adjoining surfaces complete all as specified & directed.

M & L 20 - 25 mm thick machine cut Kota stone slab in flooring or treads of steps over and including 20mm thick screed bed in cement mortar 1:4, laid and jointed with grey cement slurry mixed with pigment to match with shade of slab/rubbing, polishing etc. complete all as specified and directed. Note:- The size of Kota stone slab shall not less than 550 mm x 550 mm cut size, except the location where the balance portion remain less than size as specified above.

Description same as per Item No. 71.00 but as in riser of steps, skirting, dado and vertical surfaces including 10 mm thick rendering in CM 1:4, complete all as specified and directed.

M & L machine pressed precast concrete 60 mm thick glossy interlocking paver block M-35 Grade to IS 15658-2006, with grey cement and no pigment laid over dry sand cushioning, filling of joints with sand including demolition of stone slabs and tiles of any description or thickness etc. colour and shape as approved, complete all as specified and directed. Note : Sand cushioning shall be measured and paid separately.

M & L sand filling under floors or interlocking tile or in foundation including watering and consolidation complete all as specified and directed

M & L PCC 1:4:8 type D-2 using 40 mm graded aggregate as in mass concrete, foundation and any other location etc. and including demolition of PCC, complete all as specified and directed.

Dismanling floor,hearth or wall tiling including cement mortar bedding (but not backing),removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M & L brushing neat cement slurry with 3.0 kg of cement per sqm, complete all as specified and directed.

M & L 25mm thick cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate) as in levelling course in floor including demolition of PCC, complete all as specified and directed.

M&L vitrified ceramic tiles mat finished light shade 09 to 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm screed bed in cement mortar 1:6, complete all as specified and directed.

Description same as per Item No. 79.00 but in vertical surface including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M & L non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm , in floors etc.set jointed in neat cement sluury and pointed in white or coloured cement to match over & incl 15 mm thick screed bed built in CM 1:6, complete all as specified and directed

Description same as per Item No. 81.00 but in vertical surface including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M & L non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exc 0.11 sqm , in floors etc.set jointed in neat cement sluury and pointed in white or coloured cement to match over & incl 15 mm thick screed bed built in CM 1:6, complete all as specified and directed

M&L Endura vitrified ceramic tiles any shade 09 to 10mm thick polished, area of each tiles not exceeding 0.36 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm screed bed in cement mortar 1:6 complete, design approved by GE, all as specified and directed.

M&L Glazed ceramic coloured tiles on vertical surfaces 300x200x7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick backing coat to receiving to wall tiles in Cement mortar 1:4, complete all as specified and directed.

M&L Glazed ceramic coloured tiles on vertical surfaces 450x350x7 mm / 450x300x7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick backing coat to receiving to wall tiles in Cement mortar 1:4, complete all as specified and directed.

M&L for preparation of old concrete surfaces as in road side kerbs and applying two coats of enamel paint as approved different tints and pattern etc complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and directed.

S & F Anodised aluminium sanp grid 605 x 605 mm frame work for false ceiling, complete all as specified and directed.

S & F hangers 6 mm dia G.I.(upto 1200mm lenth) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. falt 40x3mm size 60mm long and expansion hold fasteners 12.5 mm dia 40mm long and expansion hold fasteners 12.5 mm dia. 40mm long complete all as specified and directed

M & L exposed metal frame ceiling with 4 mm th calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600 mm grid complete all as specified and directed. Note :- Frame work for ceiling shall be measured and paid seprately.

Jamna Constructions

M/S GARG CONSTRUCTION

M/S Ashish Construction

sunway associates