Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹1.8 LAdmitted-Fee/PreQual/Technical/Finance | -40.00% | ₹1.8 L | L1 | Admitted-Fee/PreQual/Technical/Finance |
| 2 | L2₹1.8 L+₹7,939.88 (4.50%)Admitted-Fee/PreQual/Technical/Finance | -37.30% | ₹1.8 L+₹7,939.88 (4.50%) | L2 | Admitted-Fee/PreQual/Technical/Finance |
| 3 | L3₹1.9 L+₹11,468.72 (6.50%)Admitted-Fee/PreQual/Technical/Finance | -36.10% | ₹1.9 L+₹11,468.72 (6.50%) | L3 | Admitted-Fee/PreQual/Technical/Finance |
| 4 | L4₹2.1 L+₹33,229.87 (18.8%)Admitted-Fee/PreQual/Technical/Finance | -28.70% | ₹2.1 L+₹33,229.87 (18.8%) | L4 | Admitted-Fee/PreQual/Technical/Finance |
Tender Value
₹2.9 L
EMD Value
₹5,880
Closing Date
14 Sept 2026, 6:00 pmClosed
EXECUTIVE ENGINEER REW DIVISION REASI
EXECUTIVE ENGINEER OFFICE REW DIVISION REASI, BLOCK NO. 2, ROOM NO. 205
Repair and Renovation along with allied works of Health and wellness centre at sarh in pyt Sarh Upper A Block Mahore Distt Reasi under scheme TRIBAL for year 2026-27
2026_RDPR_323485_14
e-NIT No. 160 of REW REASl of 2026-27
Open Tender
Civil Works
Percentage
90 days
REASI
Please refer Tender documents.
2 documents required · 2 mandatory
₹200
MH 0515
₹5,880
Yes
18 Sept 2026
7 Sept 2026
15 Sept 2026
7 Sept 2026
14 Sept 2026
7 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil :1 meter from cutting edge | 13.59 | cum | 479 | ₹6,509.61 |
| 2 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) including all leads, lift and carriage complete | 1.7 | Cum | 4,826.5 | ₹8,205.05 |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) | 9.2 | Cum | 4,685 | ₹43,102 |
| 4 | 12 mm cement plaster of mix : 1:4 ( 1 cement : 4 fine sand ) Including all leads, lift and carriage complete | 46.47 | cum | 282 | ₹13,104.54 |
| 5 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate including all leads, lift and carriage complete | 16.73 | sqm | 562.15 | ₹9,404.77 |
| 6 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) | 111.52 | sq | 98.75 | ₹11,012.6 |
| 7 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work including all leads, lift and carriage complete | 22.49 | sqm | 131.85 | ₹2,965.31 |
| 8 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).30 mm Second kail wood | 7.53 | sqm | 2,597.75 | ₹19,561.06 |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for: 2 Walls (any thickness) attached pilasters, buttresses, plinth and string courses etc. | 11.43 | sqm | 3,101.55 | ₹35,450.72 |
| 10 | Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete (300x16 mm) including all leads, lift and carriage complete | 3 | No. | 298.75 | ₹896.25 |
stage.html
html • 0.02 MB
finance_1090087.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.68 MB
BOQ_1090087.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .