Conservation/ Restoration of the Historical Temple Bohri Mohalla Chattabal Srinagar

Civil Part:- Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class deodar wood

Providing plain colour coated sheets fixed with nails and GI limpet washer (including cost of all material ,leads, lifts and carriags etc upto site of work complete) with required Head load complete. Sample and shade to be approved at site incl. cost of overlaps, scaffolding etc finished measurement to be taken at site.

Dismanteling of existing CGI/PGI sheets incl. stacking of same as per the instructions at site complete job.

Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing precoated galvanised steel sheet roofing accessories0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm)

Providing and fixing plained eaves boarding. 2nd class Deodar wood 2 300x40 mm (nominal size)

Providing and fixing 20mm thick wooden planks ceiling (frame work for base to be paid for separately) with M.S. screws3 1st class kail wood

Providing hoisting and fixing trusses/purlins /rafters /posts/ post-plates or like components including cost of screws etc. complete. First class Budloo/Fir wood

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position :Budloo / Fir wood