Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1st₹14.5 LAccepted-AOC NINGTHOUKHONG GOPINATH LEIKAI BISHNUPUR MANIPUR 795126 | BISHNUPUR | BISHNUPUR | MANIPUR | 795126 | ₹14.5 L Quoted ₹14.7 L | 1st | Accepted-AOC 1st lowest |
| 2 | 2nd₹14.9 L+₹13,899 (0.94%)Rejected-Finance | ₹14.9 L+₹13,899 (0.94%) | 2nd | Rejected-Finance 2nd lowest |
| 3 | 3rd₹15.0 L+₹25,106 (1.70%)Rejected-Finance | ₹15.0 L+₹25,106 (1.70%) | 3rd | Rejected-Finance 3rd lowest |
Tender Value
Refer Docs
EMD Value
₹28,000
Closing Date
18 Aug 2020, 5:00 pmClosed
Sr. Manager (E), Contract Department
Office of the Sr. Manager (E), Contract Department, NHPC Ltd., Loktak Power Station, Komkeirap, Manipur-795124
Providing Toilet for ladies and gents and other ancillary works at Community hall and at Pump house at Zero colony, Loktak.
2020_NHPC_574066_1
NH-LPS-H0P012(22)/23/2020-CD I and III/878
Open Tender
Civil Works
Works
120 days
NHPC Ltd., Loktak Power Station
Please refer Tender documents.
6 documents required · 6 mandatory
₹560
Yes
NHPC Ltd.
₹28,000
Yes
17 Oct 2020
29 Jul 2020
21 Aug 2020
29 Jul 2020
18 Aug 2020
29 Jul 2020
Amount
Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms lift upto 1.5 metres including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 metres.
Providing and laying cement concrete in foundation and plinth excluding the cost of centering and shuttering in 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
Steel Reinforcement for R.C.C. work i/c. bending, binding and placing in position complete. TMT bars
Providing form works i/c centering and shuttering so as to give a rough finish, strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 m and removal of the same for in-situ reinforced concrete and plain concrete work in Foundation, footings, bases of columns etc. and mass concrete.
Providing form works i/c centering and shuttering so as to give a rough finish, strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 m and removal of the same for in-situ reinforced concrete and plain concrete work in Columns, pillars, posts and struts (square, rectangular or polygon in plan).
Providing form works i/c centering and shuttering so as to give a rough finish, strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 m and removal of the same for in-situ reinforced concrete and plain concrete work in Sides or soffits of beams, beam haunchings, cantilevers, girders, bressumers and lintels not exceeding 1m in depth.
Providing form works i/c centering and shuttering so as to give a rough finish, strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 m and removal of the same for in-situ reinforced concrete and plain concrete work in-Flat surface such as suspended floor, roofs landings and the like 4.1.2.1 floors upto 200mm in thickness.
Providing & laying in position specified grade of RCC, excluding the cost of centering, shuttering, finishing and reinforcement-All works upto plinth.1:1.5:3(1cement:1.5 coarse sand:3graded stone aggregate20 mm nominal size)
RCC work in walls (any thickness ) including attached pilasters, butteress, plinth and string courses, fillets, columns, pillars, piers, abutment’s, post and struts upto floor five level excluding the cost of centering-shuttering and reinforcement. 1:1.5:3 (1cement:1.5 coarse sand:3graded stone aggregate20 mm nominal size)
RCC work in beams, suspended floors, roofs landing, shelves & their support balconies, lintels, beams, plinth beams, girders, bressumers and cantilevers upto floor two lever i/c finishing and plastering the exposed surface with cement mortar 1:3 (1 cement: 3 Fine sand) of thickness not excluding cost of centering, shuttering and reinforcement.1:1.5:3(1 cement:1.5 coarse sand:3 graded stone aggregate 20mm nominal size.
2nd class (local first class) brick work in foundation and plinth in cement mortar 1:4 (1 cement: 4 coarse sand)
Half brick masonry 2nd class (local 1st class) in cement mortar 1:3 (1 cement: 3 coarse sand) in superstructure.
Extra for half brick masonry in superstructure above plinth (floor one level) to floor two level
Honeycomb brick work (75 mm) thick with first class brick in cement mortar 1:4 (1 Cement 4 Course Sand).
12 mm cement plaster 1:3 (1 cement: 3 fine sand)
Neat cement punning.
Filling in plinth with sandy soil under floors including watering ramming, consolidating and dressing complete.
25mm cement concrete flooring 1:2:4 (1 cement:2 coarse sand :4 stone aggregate 20mm and down gauge) finished with a floating coat of neat cement
Providing plinth protection 50mm thick in cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 stone aggregate 20mm nominal size) i.c finishing the top surface of concrete smooth.
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08% and conforming to I.S 15622 of approved brand & manufacturer in all colours and shade, laid on 20mm thick cement mortar 1.4( 1 cement : 4 coarse sand)including grouting the joints with white cement and matching pigments etc. complete. Size of tile 300x300 mm (single charged) Non branded.
Providing and laying vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08% and conforming to I.S 15622 of approved brand & manufacturer in all colours and shade, in skirting, riser of steps over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand ), including grouting the joint with white cement & matching pigments etc. complete size of tile 300x300 mm(single charge) Non branded
Aluminium glazed windows and ventilators of standard aluminium extrusion section joints mitred and revited/screwed with 15x3mm lugs10 cm long with steel plugs embedded in cement concrete block 15x10x10cm of 1:3:6(1 cement:3 coarse sand :6 stone aggregate 20mm nominal size)or wooden plugs and screws of rawl plugs and screws or with fixing clips with bolts and nuts as required including providing and fixing of glass panes 4mm thick, projecting hinge, handles, peg stays, bolting device, locking arrangements, spring catch& aluminium clip beading etc. as required complete Readymade aluminium windows(side hung)Sl.10.66.
Providing and applying plaster of Paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
Applying one coat of cement primer of approved quality on wall surface.
Painting on wall with (two coats) of plastic emulsion paint of approved quality in all shades on new work to give an even shade.
Providing & fixing floor mounted, white vitreous china single piece, double traps symphonic type water closet of approve brand and make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings & fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc. including making connection with the existing P/S trap, complete in all respect as per direction of Engineer in charge.
Providing and fixing wash basin of superior quality with CI brackets, 15 mm CP brass pillar taps 32 mm CP brass waste of standard patter, including painting of fittings and brackets cutting and making good the walls wherever require: white vitreous China flat back wash basin 450X300 mm with single 15mm c.p brass pillar taps
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipe and fittings, pedestal for wash basin.
Providing and fixing mirror with plastic moulded frame.1500x450mm
Providing and fixing G.I. pipes complete with G.I. fittings and clamps i/c cutting and making good the walls etc. (Internal work).15 mm diameter
Providing and fixing G.I. pipes complete with G.I. fittings and clamps i/c cutting and making good the walls etc. (Internal work).25 mm diameter
Providing and fixing white vitreous chin flat back half stall urinal of size 580x 380x350 mm with PVC automatic flushing cistern with fittings, standard size CP brass flush pipe, R spreader with brass union & clamps ( all in CP brass) with waste fitting as per IS 2556,CI trap with outlet grating and other coupling in CP brass, including painting of fittings and cutting and making good the walls and floors wherever required.25.8.1 single half stall with 5 litre PVC automatic flushing cistern.
Steel work welded in built up sections, framed work in cutting, hoisting, fitting in position & priming coat of red lead paint .In gratings, framed guard bars, ladders, railings, brackets and similar works.
Providing and Fixing water storage tanks with 400mm diameter nominal base G.I overflow tube 25mm nominal G.I inlet and 15 mm nominal G.I outlet tube i/c hoisting a height of 10 m above ground level. 25.43.3) 1000 litres net capacity storage tanks.
Add EPF 3.25%
Add CESS 1%
Add GST @ 18% GST
M/S M. Jatikumar Singh
TH RAKHESH SINGH
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .