Chromepet RWP work

Amount

Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead :

150 mm dia pipe

Providing and fixing on wall face unplasticised PVC rain water pipes (Pressure class 4kg/sqcm) of approved make FINOLEX or equivalent including jointing with sealant all complete

110 mm diameter

Providing and fixing new PVC elbow of approved quality upto floor V level including cutting and making good the walls etc., complete as directed.

Elbow-110mm dia

Providing and fixing on wall face unplasticised PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion, (i) Single socketed pipes

163 mm outer dia(pressure class 4kg/sqcm)

Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised PVC rain water pipes conforming to IS 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.

"T" fitting-163mm dia

Shoe (Plain) -163mm dia

Elbow-163mm dia

163mmx110mm reducer

P/F MS special angle 25x25x4mm of 35 cm long with "U" Clamp flat of 20x4mm for holding 110/1600mm dia PVC rain water pipes including making holes , bolts and nuts all complete as directed by the E-in-C

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :

250 mmX16mm

Taking out the non functioning ANG door shutters and refixing the same after servicing the shutter to true alingnment and fixing with new hinges,screws and available particle board etc all complete as directed by the E-in-C..

Conveyance charges for false flooring panel boards by mechanical transport from old St.Thoas Mount TE building and transporting the same to Chrompet TE building, first floor including loading , unloading and stacking at site all complete as Directed by the Engineer-in-charge.

Laying of available false flooring tile board by checking the frames bolt and nuts and aligning its true level all complete as directed by the enginner-in-charge.

Area:25 sqm

Demolishing cement concrete to facilitate laying of plumbing pipe and disposal of rubbish all complete as directed by the E-in-C.-size: 150mmx230mm

Supplying and fixing UPVC pipe ( schedule 40) of Supreme or Finolex or equivalent including fittings such as tee, elbow, nipple, coupling, reducer, pipe clips, tank connector, end cap, threaded plug, bend, special clamps, bypass bend including with necessary brass inserts wherever required for fixing fittings, joining the pipe system as per manufacturer's specification and testing to withstand the required hydraulic pressure including cutting and making good the walls etc wherever required all complete as directed by the Engineer-in-charge.

Exposed on wall / ceiling / terrace/ below earth including fixing arrangement.a)40mm nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall

40 mm nominal outer dia. Pipes.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering. All work upto plinth level.

1:2:4 (1 cement:4 M sand:8 graded stone aggregate 40mm nominal size)

Providing and fixing UPVC gate wheel valve with handlel of approved quality and manufacture.

40mm nominal bore

Supplying and installation of moisture resistant/fire resistant cement board as per standard sizes fixed with self-drilling / taping screws. Screws shall be of counter sunk rib head of 1.60mm to 4 mm thick or 8 to 10 gauge of length varying from 25 to 45 mm.

Cement Bonded particle board 8 mm thick (Termite,Fire & Moisture Resistance), as per IS:14276 : 1995