Providing and fixing 6 No Pulleys and Painting of Gates and Structure of old Kanjli Cross regulator at RD 207730 of Kali Holy Bein at Kanjli Wet Land in Kapurthala City

Amount

Providing & Fixing Pulleys 300 mm dia ,50 mm wide. supply and carriage & loading unloading of all material complete in all respect as per specification and Direction of Engineer in Charge.

Painting two coats excluding priming coat with readymade mixed paints for metallic surfaces in all shades on steel iron works .for Kanjli Corss Regulator gates and Structure at RD. 207730 of Kali Holy Bein. (a) With Special Quality Paint supply and carriage & loading unloading of all material complete in all respect as per specification and Direction of Engineer in Charge.

Painting two Coats with anti-corrosive bitumastic Paint on old work to give an even shade with special Quality Paint .supply and carriage & loading unloading of all material complete in all respect as per specification and Direction of Engineer in Charge.

Scraping ,Brushing to remove paint to base matter surface

Apply Priming Coat with metal Primer on Iron work including preparation of Surface (a) with Special Quality Paint supply and carriage & loading unloading of all material complete in all respect as per specification and Direction of Engineer in Charge.

Supply and applying of Multi Purpose grease for Kanjli X- regulator gates carriage, loading unloading of all material complete in all respect as per specification and Direction of Engineer in Charge. 1 no. Gates used Multipurpose grease = 2 Kg. Total 12 No. gates Qty = 12x2 = 24 Kg.

Supply and applying Multi grade Mobile Oil 10 W -40 supply and carriage, loading unloading of all material complete in all respect as per specification and Direction of Engineer in Charge. 1 no. Gears System used Multigrade mobile oil = 2 ltr. Total 12 No. gates (2ltr gear for each gate) = 12x2 =24 gear Qty = 24x2 = 48ltr

Advance Direction sign board 1200x900mm rectangular aw per IRC 67-2012 with high intensity micro prismatic grade retro reflective sheeting Type xi as per ASTM D-4956-09 and as per IRC 67 2012. Fixed over 4 mm thick aluminium composite material (ACM) sheeting having aluminum skin thickness of 0.4 to 0.5mm on both sided an fixing the same with suitable size aluminum alloy rivets @ 200 mm c/c to back suport frame of 25x25x3mm angle iron supported on a mild steel angle iron post of 65x65x6mm without cost of definition plate firmly fixed to ground in foundation concrete m-25 of size 0.60x0.60x0.75m for vertical post complete per Clause 801 of Mort &H Specification A 10 Years warranty as Pre qualification Clause 6.9 of IRC 67-2012 for Type Xi retro reflective sheeting from the manfacture & a certified copy of test conforming to clause 6.7 of IRC 67-2012 including 3 years outdoor weather exposure report for the retro reflective sheeting offered shall be sumitted supply and carriage & loading unloading of all material complete in all respect as per specification and Direction of Engineer in Charge.

Supply and erection of G.I. pipe with Climp ‘A’ quality of suitable length and dia. conforming to I.S. 1239 part-I 1979, including fixing up to a given depth below G/L, the hole of excavation about 30 cm dia. and given depth to be filled in up to 15 cm below and dia. and given depth to be filled in up to 15 cm below and above G/L with 1:2:4 cement concrete up to a height of 45 cm from G/L. The radial thick ness of the plinth above G/L should not be less than 6.35 cm and sufficient to completely flush a MCB distribution board SPN 4way with hinged water tight cover with locking arrangement having one single pole MCB of required capacity of the same size the outer surface of the plinth to be finished with 1:2 cement plaster 6 mm thick M.S.fuse box shall have a water proof hinged cover with locking arrangement including painting of pole with two coats of approved aluminium paint as required:- 4 metre long having nominal bore dia. 65mm, planting depth 80cm with pit depth 95cm, including Supply and carriage , loading and unloading of all material complete in all respect as per PWD specification

Providing and laying 7 watt LED 40 watt Solar Panel batery 12 V40AH with T-gel Battery for Kanjli Sites.including Supply and carriage , loading and unloading of all material complete in all respect as per PWD specification

THE MOHAN KE UTTAR COOP L AND C SOCIETY LTD