Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.9 LAccepted-AOC | L1 | Accepted-AOC AOC | |
| 2 | L2₹25.0 L+₹1.5 L (6.33%)Rejected-Finance UTARLAI KAWAS BARMER RAJASTHAN 344 001 | BARMER | RAJASTHAN | 344001 | L2 | Rejected-Finance Highest |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
2 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE ARMY BARMER
Military Engineer Services, Jalipa Military Station, Garrison Engineer (Army), Barmer, PIN 344001
REPAIR TO CERTAIN MISC BR WORK IN BLDGS OF ZONE A AT JALIPA MIL STN UNDER GE ARMY BARMER
2022_MES_571894_1
8652/E8
Open Tender
Civil Works
Item Rate
330 days
GE ARMY BARMER
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE ARMY BARMER
₹50,000
23 Mar 2023
29 Dec 2022
9 Feb 2023
29 Dec 2022
2 Feb 2023
14 Jan 2023
Amount
Demolition of cement concrete (unreinforced) in ground floors, and pavings n.exc. 15 cm thickness (below or above GL) and removing rubbish to out side MD land complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding; removing serviceable tiles to store or disposing off the site after offering credit complete all as specified and directed.
Dismantling stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed.
Taking down cement plaster on brick/ stone/PCC block masnory walls etc any description incl raking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off the premises and leaving the work clear of any plastering complete all as specified and directed .
Demolition of brick/stone/PCC block masnory work built in cement mortar in any description and removal of unserviceable materials, debris, rubbish to out side MD land complete all as specified and directed.
Taking down shutters of any description n exc 1 sq. m each repair and refixing in same opening (Aluminium shutter/wooden shutter) including all necessary fitting which is required for tightnining to shutter complete all as specified and directed.
Taking down shutters of any description exc 1 sq. m and n exc 2 sq. m each repair and refixing in same opening (Aluminium shutter/wooden shutter) including all necessary fitting which is required for tightnining to shutter complete all as specified and directed.
Taking down shutters of any description n exc 1 sq. m each complete all as specified and directed.
Taking down shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed.
Taking down shutters of any description but exc 2 sq. m each complete all as specified and directed.
Taking down chowkhats or frames not exc. 1.5 sq. m each but with shutters (without taking off shutters from the frames) complete all as specified and directed.
Taking down chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each each but with shutters (without taking off shutters from the frames) complete all as specified and directed.
Taking out old serviceable glass of any description, from old wooden or metal frames, or stone, concrete or brick surrounds, any thickness or size; hacking out old putty or removing beads etc, including making good breakages in taking out and handling removing to store or stacking for reuse complete all as specified and directed.
M&L for 75mm thick Cement concrete type C-2, 1:3:6 (40mm graded stone aggregate) for plinth protection finished even and smooth with out using extra cement complete all as specified and directed.
M&L 40 mm thick PCC type B-1, 1:2:4 (20 mm graded agggregate),as in floor, finished smooth and even with out extra cement complete all as specified and directed.
S&F for Glass dividing strips, 3 mm thick, 28mm width and inserted in position,conform to design complete all as specified and directed.
M&L for 100mm thick PCC type B-2, 1:2:4 (40 mm graded agggregate),as in floor, finished smooth and even with out extra cement complete all as specified and directed.
S&F for Glass dividing strips, 3 mm thick, 38mm width and inserted in position,conform to design complete all as specified and directed.
M&L for forming Construction joint 30mm deep x 10mm wide filled with sealing compound grade 'A' complete all as specified and directed.
M&L for cement concrete Type C2 1:3:6 (40mm graded aggregate) in foundations, filling and mass concrete for sub base complete all as specified and directed.
M&L for machine pressed precast concrete interlocking paver block rubber moulded any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade over 25mm thick sand cushioning complete all as specified and directed.
M&L for machine pressed precast concrete interlocking paver block rubber moulded any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade over 25mm thick sand cushioning complete all as specified and directed.
M&L for Non skid coloured Ceramic tiles 7 to 8 mm thick joint free (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc and set, jointed in neat cement slurry including over screed bed or bedding layer of mortar 15 mm thick in CM (1:6) complete all as specified and directed.
All as per Sl item No 23 above but in skirting over 10mm thick backing coat in CM (1:4) complete all as specified and directed.
M&L for 10.5mm thick rectified digital floor tiles of size exc. 0.06 sqm but not exc 0.11 sqm any square/rectangular shape and size conforming to relevant IS with coloured cement and pigment, laid over and incl 15 thick screed bed in CM (1:6) and all as specified and directed. Make : Johnson or equivalent make
M&L for Non skid coloured Ceramic tiles 7 to 8 mm thick joint free (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. jointed in neat cement slurry and including screed bed or bedding layer of mortar 15 mm thick in CM (1:6) complete all as specified and directed.
All as per Sl item No 26 above but in skirting over 10mm thick backing coat in CM (1:4) complete all as specified and directed.
M&L for coloured glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match set including 10mm thick backing coat in CM (1:4) complete all as specified and directed.
M&L for Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar, complete ,type C-1 1:3:6 (20mm graded aggregate) set in CM (1:6) complete all as specified and directed.
All as per Srl item No 29 above but except pre-cast cement concrete block complete all as specified and directed.
M&L for Rendering 10mm thick on fair faces of brick work in CM (1:6) for wall complete all as specified and directed.
M&L for Rendering 15mm thick on fair faces of brick work [in two layers 5mm thick CM (1:4) over 10mm thick CM (1:6)] finished even and smooth with water proofing compound all as specified and directed. Note : WPC measured and paid seprately.
Supply only liquid water proofing compound of approved make complete all as specified and directed.
M&L for Rendering 5mm thick on ceiling surface for fair face of plastered surfaces in CM (1:4) for wall complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper paint over a coat of 3mm thick wall care putty over a coat of alkali resistance primer as per manufacturer's instructions etc complete all as specified and directed.
M&L for preparing new plastered or unplastered surfaces of walls, and applying three coats of white wash complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint/camouflage painting over a coat of alkali resistance primer as per manufacturer's instructions etc complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489: 2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.
M&L for preparation of new plastered surfaces of ceiling and applying two coats of oil emulsion distemper over a coat of alkali resistance primer as per manufacturers' instructions etc complete all as specified and directed.
M&L for preparation of new plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed.
M&L for Machine cut kota stone slab flooring 20-25mm thick over 15mm thick screed base in CM (!:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing to give high gloss finish complete all as specified and directed.
M&L for Kota stone slab 20-25mm thick Mirror polishing to give high gloss finish in riser of steps, skirting, dado and pillar laid over 10mm thick backing coat in CM (1:4) and jointed complete all as specified and directed.
M&L for machine pressed cement concrete tiles 25cm x 25cm x 22mm thick, coloured tile set jointed and pointed in neat cement slurry in floors with white cement and pigment, and cut and polished including 15mm thick screed bed in CM (1:6) complete all as specified and directed.
M&L for chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors including 15mm thick screed bed in CM (1:6) complete all as specified and directed.
S&F for steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars,dovetailed or welded complete all as specified and directed.
S&F for steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.
S&F for steel ventilators, fixed type, with glazing bars complete all as specified and directed.
S&F for pressed steel frames (105 x 60mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.,complete all as specified and directed.
S&F for pressed steel frames (125 x 60mm )for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.
S&F for chimney bars (straight or camber); bearing bars; tongues or water bars for window frames; window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165 complete all as specified and directed.
M&L for preparation undecorated steel surfaces of any description, not otherwise described, over 10cm width or girth applying two coat synthetic enamel paint over a coat of red oxide, zinc crome complete all as specified and directed.
S&F for stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F in repair Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.
S&F for 3mm sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.
S&F for 3mm sheet glass, frosted, on one side ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.
S&F in repair 3mm sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.
S&F for 35 mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.
S&F for 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides both faces is covered with decorative face veneer with lipping/frame to match complete all as specified and directed.
M&L for preparation new or previously untreated wooden surfaces of any description, not otherwise descri-bed, over 10cm width or girth applying two coat synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S&F for 150 mm aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.
S&F for 250mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
S&F for 100 mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed.
S&F for 150mm aluminium handles, cast type, anodised complete all as specified and directed.
S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.
S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.
S&F for 100mm size aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.
S&F for 150 mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed.
S&F for 100mm aluminium handles, cast type, anodised complete all as specified and directed.
S&F in repair 300mm, mild steel rat tail rod pattern springs including roller plate complete all as specified and directed.
S&F for anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
S&F for Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.
S&F for Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.
S&F for 5.50mm sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.
S&F for 5.50mm sheet glass, ordinary quality and glazing with oil putty in square but exc 0.5 sq. m in each pane complete all as specified and directed.
S&F for 140mm in repair floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.
S&F aluminium (Die cast) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.
S&F in repair aluminium (Die cast) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.
S&F for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.
S&F in repair Drapory rod 25mm dia alluminium alloy powder coated fixed with fancy type matching pair of bracket not less than 75 grams each fixed with screw complete all as specified and directed.
Disconnecting existing tanks of capacity of 250 ltr to 500 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.
Disconnecting existing tanks of capacity up to 500 ltr to 1000 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.
Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc of water tank exc 250 ltr n exc 500 ltr complete all as specified and directed.
Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc of water tank exc 500 ltr n exc 1000 ltr complete all as specified and directed.
S&F in repair 15mm bore Bib taps CP fancy type, cast copper, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
S&F in repair stop valves, cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for 25 mm bore iron pipe or for unions complete all as specified and directed.
S&F in repair, fancy type, chromium plated, stop valve, long body cast copper alloy with high pressure with with crutch, screwed for 15 mm bore iron pipe complete all as specified and directed.
S&F in repairs, angle cock/stop valves, 15 mm dia, cast copper alloy, screwed down high pressure with crutch or butterfly handle and fancy type & chromium plated for iron pipe or for union etc complete all as specified and directed.
S&F for 500 ltrs capacity rotational moulded polythene water storage tanks white three layered (ISI marked) (Cylinderically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I including dismantling of unserviceable old tank complete all as specified and directed.
S&F for 1000 ltrs capacity rotational moulded polythene water storage tanks white three layered (ISI marked) (Cylinderically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I including dismantling of unserviceable old tank complete all as specified and directed.
S&F for 2000 ltrs capacity rotational moulded polythene water storage tanks white three layered (ISI marked) (Cylinderically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I including dismantling of unserviceable old tank complete all as specified and directed.
S&F for 15mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed (Minimum weight 15mm-142gms) complete all as specified and directed.
S&F for 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete all as specified and directed. (Minimum weight 20 mm - 210 gms)
S&F for 25 mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod &highdensity plastic ball screwed for iron pipe and fixed (Minimum weight 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed.
Taking up or down 15mm bore steel tubing and connections including cleaning for refixing or credited to contractor complete all as specified and directed.
Taking up or down 25mm bore steel tubing and connections including cleaning for refixing or credited to contractor complete all as specified and directed.
S&F for 16mm bore CPVC pipes SDR 11 tubing (ISI marked) 16mm bore with fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
S&F for GI tubing (ISI marked) 25mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
Refixing of old 15mm bore GI tubing and connections in new or old position including provision of new GI fittings ( as ordered) and fixed complete to walls and ceiling or laid in floors complete all as specified and directed .
Refixing of old 25mm bore GI tubing and connections in new or old position including provision of new GI fittings ( as ordered) and fixed complete to walls and ceiling or laid in floors complete all as specified and directed .
S&F in repair of 15mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete all as specified and directed. (Minimum weight 15mm-142gms)
S&F in repair of 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete all as specified and directed. (Minimum weight 20 m m - 210 g m s .
S&F in repair of 25 mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod &highdensity plastic ball screwed for iron pipe and fixed complete all as specified and directed. (Minimum weight 25mm-455gms/ 40mm - 690 gms)
M&L in repair 18/19 mm thick MDF Board prelaminated decorative face both side fixed with screws to timber frame work etc including prelaminated exterior grade both side laminated complete all as specified and directed .
S&F in repairs stainless decorative type auto hinges etc complete all as specified and directed.
S&F in repairs stainless decorative type handle 150mm long complete all as specified and directed .
S& F in repair magnet for cup board etc complete all as specified and dirrected.
S&F in repairs stainless decorative type handle 100mm long complete all as specified and directed.
Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridges etc complete all as specified and directed.
M&L for prepainted Galvalume aluminium zinc coating GI based corrugated/ Mangolore pattern roof steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws including dismantling plain, corrugated steel sheeting with ridge, any gauge, thickness including nanital or similar pattern in roof covering same complete all as specified and directed.
M&L for prepainted Galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering, chajjas / cladding to wall, fixed with self tapping screws including dismantling plain, corrugated steel sheeing, any gauge, thickness including nanital or similar pattern in roof covering same complete all as specified and directed.
M&L for 6mm thick asbestos cement corrugated or semicorrugated sheets as in roof, wall coverings fixed with J/L type bolts or cranked hook bolts etc complete all as specified and directed.
All as per item No. 112 above but except sheets. (Note: Serviceable sheets obtained from item No. 109 shall be reused.)
M&L for Asbestos cement one piece plain angular ridge 6mm thick serrated ridge for corrugated or semi corrugated sheets Fixed with L-type or J type or cranked hook bolts complete all as specified and directed.
Excavating in post holes or similar holes each not n exc 0.50 cu.m,getting out any in type of soil by chiselling, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm complete all as specified and directed.
Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
S&F for steel work in tubular trusses including special shaped washers etc complete using ERW or induction butt welded tubes confirming to IS:1161-1979 Grade St-240 including drilling for the size connection complete all as specified and directed.
S&F for rolled mild steel work confirming to Fe 410-W, Grade-E- 250, Quality-A roof trusses (framed), trussed, purlins,chajjas, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.
S&F for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm but n. exc 10cm long and dia 5 to 10 mm complete all as specified and directed.
S&F for rolled mild steel work confirming to Fe 410-W, Grade-E- 250, Quality-A as in plates [plain & chequered], channels, angles, square cut or notched [ordinary or counter sunk] forming holes without any attachment complete all as specified and directed.
M&L for PCC 1:2:4 type B2 by using 40mm graded stone aggregate as in foundations filling and mass concrete complete all as specified and directed.
M&L for preparation of new surfaces of steel of any description and in any position over 10 CM width or girth; not otherwise described, and applying two coat of synthetic enamel paint and one coat red oxid, complete including necessary scaffolding arrangement as required at site all as specified and directed.
S&F in repair brass CP wash hand basin mixer fancy type single lever without poput waste system with 450mm long braided hoses with necessary fixing arrangements complete all as specified and directed . Make : Model No. FLR-5001B of JAQUAR make or equivalent model in Kolher/ Grohe.
S&F in repair brass CP sink mixer fancy type with regular spout with necessary fixing arrangements complete all as specified and directed . Make : Cat No. 7655 of Prayag or equivalent model in Cera/ Jhonson/Hindware.
S&F in repair brass CP wall mixer fancy type with telephonic shower arrangement, connecting legs and wall flanges but with out crutch and telephone including necessary fixing arrangements complete all as specified and directed . Make : Model No. QQT-7217 of JAQUAR make or equivalent model in Kolher/ Grohe.
S&F 12mm thick Toughned glass as in hinged doors & partitions automatic doors and similar work including cutting to shape, drilling holes required with all stainless steel work like hinges/floor spring/pivets, 250mm size handles-02 nos in each door and other all requires accessories/fittings in each door/partition as per manufacturer's instruction complete all as specified and directed.
Demolition of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards / slabs / blankets, any thickness, including cover fillets complete all as specified and directed.
M&L for Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions including GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre complete all as specified and directed.
M&L for Providing and fixing gypsum ceiling cornices 20mm thick and 0.20m wide with complete fixing arrangement as per manufacturer's instruction complete all as specified and directed.
M&L for preparing new plastered or unplastered surfaces of ceiling, and applying two coats of distemper oil emulsion over a coat of interior primer over 3mm thick wall care putty complete all as specified and directed.
Demolition of cement concrete (reinforcement cut as required to facilitate demolition) Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed.
Cutting chases in Stone, concrete block or slab walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for embedding the steel sheet, concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth all as specified and directed.
M/S Tanisha Traders
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .