Karnataka

Active

Works

Lift Irrigation Scheme

Providing irrigation facility by driling borewell in the land of Mudamma w/o Shivarudraya of Neelkantanahalli in Channapatanna Taluk of Bangalore South Disrict.

Minor Irrigation Department

Minor Irrigation Division Bengaluru | Bengaluru Urban, Karnataka

Amount: ₹4.9 LCloses: 31 Jul 2026Due today

Timeline

Published16 Jul 2026
Closes31 Jul 2026

Tender Value

₹4.9 L

EMD Value

₹12,200

Closing Date

31 Jul 2026, 10:00 pmDue today

Tender Inviting Authority

Office Inviting Bids

Minor Irrigation Department

Contact Person

technical assistant

Mobile Number

9986666591

Work Description

Providing irrigation facility by driling borewell in the land of Mudamma w/o Shivarudraya of Neelkantanahalli in Channapatanna Taluk of Bangalore South Disrict.

Tender Information

Tender ID

MI/2026-27/LI/WORK_INDENT12375

Reference Number

MI/2026-27/LI/WORK_INDENT12375

Tender Type

Open

Product Category

Lift Irrigation Scheme

Form of Contract

Electronic Documents, First(One Cover)

Location

Minor Irrigation Division Bengaluru

Source Website

Subscribe to view

Documents Required

5 documents required · 5 mandatory

Technical Bid

RequiredAnnual Turnover Certificate along with Balance sheet certified/attested by Chartered Accountants should be uploaded with 18-Digits system generated unique number UDIN Number

RequiredPWD registration certificate/Civil/electrical registration certificate

RequiredContractor Should Quote the Rates Exclusive of GST.

RequiredContractor shall submit 7A farm and agreement between from Rig owner and Agency

RequiredLatest Address and contact number for communication to be furnished.

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The Contractor shall pay the Earnest Money Deposit EMD & Tender Transaction fee in the Kpp portal using any of the following payment modes Credit Card, Direct Debit, National Electronic Fund Transfer NEFT, and Over the Counter OTC.

The tenderer shall scan and upload all the original documents required for this bid to the Kpp portal. The uploaded documents should be clear (Visible), unclear documents will be rejected.The original documents shall be produced at the time of physical verification.

One percent of the bill amount of the successful tenderer will be deducted towards cess as a labor welfare fund.

All documents enclosed should be attested by Gazetted officer or GovernmentNotary, otherwise the bids are liable for disqualification. Original documents should be produced for verification at any stage of the Tender process, as and when sought for. Failure to produce original documents will lead to disqualification. Work done certificates should have all the CR no, work order issuing date, work completion date and year.

Price adjustment clause will not be applicable as per prevailing governmentorder and only star rates are applicable.The intending bidder firm/ company are advised to visit the work site before submission of tenders.

Omission and typographical errors which are in the opinion of the executive Engineer will not be a ground for claims of extra payment.

The tenders invited as per Standard tender Bid Document KW-1 and shall abide for the conditions contained in Standard tender Bid Document KW-1.

Contractor Should Quote the Rates Exclusive of GST.

Executive engineer reserves the right to accept or reject any tender and to cancel the tender process and reject all tenders at any time prior to award of contract, without there by incurring any liability to the affected tenderer or tenderers or any obligation to inform the affected tenderer or tenderers of the grounds for the employers action.

The contractor must upload existing commitment of the ongoing works in hand for the calculation of tender capacity. Tenderers shall provide the requested information accurately and in sufficient detail in section 3.

The contractor should obtain the Material Dispatch Permit for stone, aggregates, sand and Murometc will be used in the construction work from the Mines and Geology department at the time of execution and same should be submitted along with the work bill, then for such work bills no Royalty will be deducted. If the contractor failed to submit the Material Dispatch Permit along with the work bill Five times Royalty will be deducted from the work bill as per KMMCR 2016 amendment rule 44(4) and the circular vide No.Ga.Bhu.E/DCB/DCB/Takte/2019-20/4497 Dated: 12/12/2019 by Mines and Geology department.

Restrictions on Public Procurement from Bidders of certain countries as per Government order No.FD 455 Exp-12 2020 Bangalore dated: 25-08-2020.

Item for which 0.00 rates entered will not be paid for by the employer when executed and shall be deemed covered by the other rates & prices in the bill of quantities.

The Defects Liability Period is 365 Days after the completion of work.

Contractor shall submit 7A farm and agreement between from Rig owner and Agency

Work Locations

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹12,200

Important Dates

Last Activity

16 Jul 2026

Published

16 Jul 2026

Download Ends

31 Jul 2026

BOQ Preview

•

Providing irrigation facility by driling borewell in the land of Mudamma w/o Shivarudraya of Neelkantanahalli in Channapatanna Taluk of Bangalore South Disrict.

•

Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...

•

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

•

Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...

•

Providing and fixing MS Casing collars as per IS1239(part-II) 1982 with all latest amendments if any dia. The thickness of plate used forcovering one end shall be 3mm(minimum). The dimensions of cap a...

•

Providing and laying at site of work MS casing caps as per IS 1239 (part II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum)...

•

Fabricating supplying and mounting MS box made out 16 SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped ...

•

Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog ...

•

Labour charges for erection of outdoor type panel board and meter board units with all necessary materials and labour, tools and equipments including providing cement concrete foundation bed etc., com...

•

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the meter board using 40mm dia 2.90mm thick G.I. Pipe 2.5mtr long burried in a pit. The pit shou...

•

Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications,as per ne...

•

Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one end fitted with Heavy Duty collar...

•

Supply and delivery at site wrought middle steel (galvanized) GI elbow confirming to IS 1239-II, 1991 with latest amendments if any for:50mm dia (Item No 11.7.6, Page No 129 of Vol-V SR 2023-24).

•

Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments. 50mm dia(Item No 13.25.1, Page No 154 of Vol-V SR 2023-24).

•

Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. 1x3x4 S...

•

Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well cap...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

gov orders.zip

Others - gov orders • 11.89 MB

12375 kw1 -CHANN.docx

Tender Document • 0.22 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].