Angadu Anganwadi building chemelivaram agamt work

Amount

CONSTRUCTION OF ANGANWADI BUILDING IN CHEMBELIVARAM AT ANGADU PANCHAYAT

Earth work excavation and depositing on bank within initial lead of 10m & initial lift of 2m in hard stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders SS .20.A

Supplying and filling in foundation and basement with good sand in layers not more 15cm thick including ramming , watering and compacting etc., completed

Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, etc

Supplying and filling with carted earth foundation and basement with good sand in layers not more 15 cm thick including ramming, watering and compacting etc.complete complying to standard specification carted earth

Brick work in CM 1:5 mix using country bricks ground moulded of size 23 x 11 x 7 Cm for the following including curing etc., complete complying with standard specifications.

(Basement)

(Super structure)

Supplying and Fabricating and placing in position MS Steel or ribbed for steel for all reinforced cement concrete works as per the design given including cost of steel and blinding wire all floors etc., complete complying with standard specification.

Supplying and Erection centering for sides and soffiots including necessaary supports and strutting as directed by the departmental officers. Rate for 10m2 for the following items (RCC floor slab, roff slab, Rectangular / Square, Tee/ Ell beams, Lintels,

(Basement)

(Super structure)

Reinforced cement concrete 1; 11/2;3 using 20mm iss HBG metal including the cost and conveyance of all meterials and cost of all labour charges etc completed,..

(Basement)

(Super structure)

Wethering course with Terrace flooring with one course of pressed tiles size of 20 x 20 x 2cm using CM1:3 mixed with crude oil 10% by weight of cement and pointed with cement mortor 1:3 over one coarse of Brick jelly lime concrete of 75mm average thick etc., complete..

Providing Scratch proof ceramic tiles including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc, complete.

Dadooing the walls with Glazed tiles including the cost and conveyance of all materials and cost of all labour charges etc., complete

Ceiling Plastering with cement mortar 1:3 mix to 10 mm thick for R.C.C. Items including cost and conveyance of all materials to site and all labour charges etc complete

Plastering cm 1;5 -12mm Thick including the cost and conveyance of all materials and cost of all labour charges etc., complete.

Distempering two coat using oil bound Distemper including cost of and conveyance and approved colour paint with labour charges etc,.

Painting two coat approved Exterior Emulsion paint over the plastered surface including cost and conveyance and all other charges etc.,

Supply of steel doors 0.90x2.10 m

Window 1.20 x 1.30 m

Ventilator 0.90x0.45 m

Supply and fixing of Cuddappa slab including cost and conveyance of cuddappa slab and labour charges for fixing etc, complete.

Cost and supply of RCC Jolly

ELECTRICAL ARRANGMENTS

Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3 mm thick Hylum sheet cover with TW box And 5 A FT switch with continuous earth connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC Open Light point / fan point (For electronic Regulator) SD 20

Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 150 mm X 100 mm X 113 mm TW switch box with 3 mm thick Hylum sheet cover for 5 A 3 pin non interlocking CS plug with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for concealed PVC plug point SD 136

Supply and run of 2 of 1.50 sq.mm (22/0.30) PVC insulated SC unsheathed copper Conductor of 1100 V grade on 7/20GI bearer wire for service connection mains SD65

Supply and run of 2 X 1.5 sq.mm (22 / 0.30) PVC insulated SC unsheathed copper Conductor of 1100 V grade in 25 mm dia GI pipe ( Class ' B ' ) suitably bent at both ends with necessary angle iron upright and end supports for mains. SD 70

Supply and fixing of WT bulk head fitting with guard ( Philips / Bajaj / Crompton / K Lite ) suitable for incandescent lamp with 60 W bulb.SD 84

Supply and fixing of CFL bulb SD 80

Supply and fixing of 1200 mm ( 48") AC ceiling fan complete with stepped electronic 300 W regulator with 300 mm down rod on the existing clamp. SD 111

Supply and fixing of 16 Amps DPIC Switch of 500 V with fuse and neutral (Side Handle) on suitable TW box PWD Earthing SD 143

Supply and fixing of TNEB Meter board SD 125

Provision for E B Deposit charges etc.,

SANITARY ARRANGMENTS

Water Drain pipe 110mm pg no 22

110mm Pvc Bend

110mm Pvc Tee

110mm Pvc Elbow

Airflow vent pipe

Vent cowl

WATER SUPPLY ARRANGMENTS

Providing of 90mm Pvc pipe

Providing of 90mm Pvc Elbow

90mm PVC Bend

90mm PVC Tee

90mm PVC Elbow

90mm PVC Threaded coupler

90mm PVC End Cap

Providing 25mm pipe for internal Fittings with labour charges etc

Providing of wash basin

Provision for Sintex tank 1000LTR

GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)

M RAJAGOPAL